Volume 5, Issue 3 (21 2012)
ijhe 2012, 5(3): 343-354 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Naeej O B, Mohseni Bandpi A, Jonidi Jafari A, Esrafili A, Rezaei Kalantary R. Removal of Nitrate from Water using Supported Zero-Valent Nano Iron on Zeolite. ijhe 2012; 5 (3) :343-354
URL: http://ijhe.tums.ac.ir/article-1-16-en.html
URL: http://ijhe.tums.ac.ir/article-1-16-en.html
Omol banin Naeej 
, Anoushiravan Mohseni Bandpi , Ahmad Jonidi Jafari , Ali Esrafili , Roshanak Rezaei Kalantary * 1
, Anoushiravan Mohseni Bandpi , Ahmad Jonidi Jafari , Ali Esrafili , Roshanak Rezaei Kalantary * 1
1- , r-rezaei@tums.ac.ir
Abstract: (15228 Views)
MicrosoftInternetExplorer4 Background and Objectives: Nitrate is one of the most groundwater pollutants in world.
Reduction of nitrate to nitrite by microorganisms cause serious health hazards.
Nitrate can be eliminated using either adsorbtion or reduction. In this study,
we investigated the adsorption of nitate on zeolite and the feasibility of
removal improvement using supported zero
valent nano iron on zeolite via the reduction process.
Materials and Methods: The study was done in two phases investigation the zeolite and modified zeolite with zero valent nano iron in nitrate removal from water. First, we determined the optimum pH and time then the effect of adsorbent and nitrate concentration was investigated in one factor at the time. The adsorption isotherm was calculated according to the optimum condition. The physical characteristics of adsorbents were determined using SEM and TEM.
Results: The morphology investigation of adsorbent showed that the particle size of supported zero valent nano iron on zeolite was approximately 30-50 nm in diameter. The best conditions were pH 5, contact time of 120 min and 15 g/L for zeolite, while pH 3, contact time of 50 min and 7.5 g/L for supported zero valent nano iron on zeolite. The isotherm equations revealed that nitrate adsorption follows Langmiur in both cases.
Conclusion: The supported zero valent nano iron on zeolite could be considered as a high potential adsorbent for nitrate because it has several adsorbent sites, and Fe0 as a function for nitrate reduction.
Materials and Methods: The study was done in two phases investigation the zeolite and modified zeolite with zero valent nano iron in nitrate removal from water. First, we determined the optimum pH and time then the effect of adsorbent and nitrate concentration was investigated in one factor at the time. The adsorption isotherm was calculated according to the optimum condition. The physical characteristics of adsorbents were determined using SEM and TEM.
Results: The morphology investigation of adsorbent showed that the particle size of supported zero valent nano iron on zeolite was approximately 30-50 nm in diameter. The best conditions were pH 5, contact time of 120 min and 15 g/L for zeolite, while pH 3, contact time of 50 min and 7.5 g/L for supported zero valent nano iron on zeolite. The isotherm equations revealed that nitrate adsorption follows Langmiur in both cases.
Conclusion: The supported zero valent nano iron on zeolite could be considered as a high potential adsorbent for nitrate because it has several adsorbent sites, and Fe0 as a function for nitrate reduction.
Type of Study: Research |
Subject:
General
Received: 2012/05/5 | Accepted: 2012/08/4 | Published: 2013/07/10
Received: 2012/05/5 | Accepted: 2012/08/4 | Published: 2013/07/10
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
