Volume 5, Issue 2 (13 2012)
ijhe 2012, 5(2): 211-224 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Bazrafshan E, Joneidi Jaafari A, Kord Mostafapour F, Biglari H. Humic acid Removal from Aqueous Environments by Electrocoagulation Process Duad with Adding Hydrogen Peroxide. ijhe 2012; 5 (2) :211-224
URL: http://ijhe.tums.ac.ir/article-1-28-en.html
URL: http://ijhe.tums.ac.ir/article-1-28-en.html
1- , Hamed.biglari@gmail.com
Abstract: (11932 Views)
MicrosoftInternetExplorer4 Background and Objectives: Presence of humic acids in
water resources is important because it is a precursor to disinfection
by-products (DBPs) and affects many treatment processes. In this study, we
investigated the performance of electrocoagulation process duad with hydrogen
peroxide (creating Fenton process) in removal of humic acids (HA) from aqueous
environment.
Materials and Methods: The experiments were performed using a 1 L bipolar batch reactor (covered with the aluminum foil) equipped with iron electrodes and connected to electric source having electrical potential 10 V in bipolar mode. First, reactor was filled up using aqueous solution containing 20 mg/L HA. Later, several working parameters, such as initial pH (3, 5, 7, and 8), electrical conductivity produced from adding 1, 1.5, 2 and 3 g/l KCl and reaction time were studied to achieve the highest humic acid removal capacity. To follow the progress of the treatment, hydrogen peroxide (50 mg/l) was added to reactor and then samples of 10 ml were taken at 5, 15, 30, 45, and 60 min and then filtered (0.45 μ) to eliminate sludge formed during electrolysis. Finally, humic acid and iron concentration was measured using TOC analyzer and atomic absorption method respectively.
Results: Results of this study showed that the most effective removal capacities of humic acid (97.19%) could be achieved when the pH was kept 5(KCl 3g/l and reaction time 60 min). The share of Fenton and electrocoagulation process was %7.9 and %92.1 respectively. In addition, our results indicated that the removal efficiency of humic acid with increase of pH and electrical conductivity parameters decreases and increases respectively.
Conclusion: It can be concluded that the Fenton process duad with electrocoagulation process has the potential to be utilized for cost-effective removal of humic acid from aqueous environments.
Materials and Methods: The experiments were performed using a 1 L bipolar batch reactor (covered with the aluminum foil) equipped with iron electrodes and connected to electric source having electrical potential 10 V in bipolar mode. First, reactor was filled up using aqueous solution containing 20 mg/L HA. Later, several working parameters, such as initial pH (3, 5, 7, and 8), electrical conductivity produced from adding 1, 1.5, 2 and 3 g/l KCl and reaction time were studied to achieve the highest humic acid removal capacity. To follow the progress of the treatment, hydrogen peroxide (50 mg/l) was added to reactor and then samples of 10 ml were taken at 5, 15, 30, 45, and 60 min and then filtered (0.45 μ) to eliminate sludge formed during electrolysis. Finally, humic acid and iron concentration was measured using TOC analyzer and atomic absorption method respectively.
Results: Results of this study showed that the most effective removal capacities of humic acid (97.19%) could be achieved when the pH was kept 5(KCl 3g/l and reaction time 60 min). The share of Fenton and electrocoagulation process was %7.9 and %92.1 respectively. In addition, our results indicated that the removal efficiency of humic acid with increase of pH and electrical conductivity parameters decreases and increases respectively.
Conclusion: It can be concluded that the Fenton process duad with electrocoagulation process has the potential to be utilized for cost-effective removal of humic acid from aqueous environments.
Type of Study: Research |
Subject:
General
Received: 2011/10/29 | Accepted: 2012/01/23 | Published: 2013/09/30
Received: 2011/10/29 | Accepted: 2012/01/23 | Published: 2013/09/30
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
