Volume 12, Issue 2 (9-2019)
ijhe 2019, 12(2): 289-306 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Fallah Jokandan S, Yegane Badi M, Esrafili A, Azari A, Ahmadi E, Tarhandeh H et al . Investigation of the efficiency of powder activated carbon magnetized with Fe3O4 nanoparticles in the removal of catechol from aqueous solutions by response surface methodology. ijhe 2019; 12 (2) :289-306
URL: http://ijhe.tums.ac.ir/article-1-6174-en.html
URL: http://ijhe.tums.ac.ir/article-1-6174-en.html
S Fallah Jokandan1 
, M Yegane Badi2 , A Esrafili2 , A Azari3 , E Ahmadi3 , H Tarhandeh4 , M Kermani * 5
, M Yegane Badi2 , A Esrafili2 , A Azari3 , E Ahmadi3 , H Tarhandeh4 , M Kermani * 5
1- Department of Environmental Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
2- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
3- Department of Environmental Health Engineering, School of Public Health, Kashan University of Medical Sciences, Kashan, Iran AND Students’ Scientific Research Center, Tehran University of Medical Sciences, Tehran, Iran
4- Department of Management, Faculty of management, Tehran University, Tehran, Iran
5- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran ,kermani.m@iums.ac.ir;majidkermani@yahoo.com
2- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran
3- Department of Environmental Health Engineering, School of Public Health, Kashan University of Medical Sciences, Kashan, Iran AND Students’ Scientific Research Center, Tehran University of Medical Sciences, Tehran, Iran
4- Department of Management, Faculty of management, Tehran University, Tehran, Iran
5- Research Center for Environmental Health Technology, Iran University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, School of Public Health, Iran University of Medical Sciences, Tehran, Iran ,
Abstract: (2922 Views)
Background and Objective: The activities of various industries produce a wide range of pollutants and toxic compounds. One of these compounds is the catechol, a cyclic organic compound with high toxicity and resistant to degradation. Therefore, the purpose of this study was to investigate efficiency of powder activated carbon magnetized with Fe3O4 nanoparticles in the removal of catechol from aqueous solutions by response surface methodology.
Materials and Methods: The co-precipitation method was used to synthesize magnetic powder activated carbon and its properties were analyzed by SEM and XRD analysis. Then, the effect of the parameters such as pH, contact time, absorbent dose, initial concentration of catechol and temperature on the efficiency of adsorption process were investigated using a response surface methodology (Box–Behnken). The residual concentration of catechol was measured by HPLC at 275 nm.
Results: The results showed that the maximum efficiency of the adsorption process was obtained at concentration of 20 mg/L, pH=3, contact time 90 minutes, at 25 °C and absorbent dose of 1.5 g/L. The study of isotherm and kinetics showed that the experimental data of the catechol adsorption process correlated with the Langmuir and pseudo-second order models, respectively. Thermodynamic study of the reaction also expresses the Exothermic and Spontaneous process.
Conclusion: The results showed that the adsorption process using powder activated carbon magnetized with Fe3O4 nanoparticles at acidic pH had better efficiency. As a result, the studied process as an effective, rapid and inexpensive method for removal of catechol from aqueous solutions is proposed. Due to its short reaction time, it is economically affordable process.
Materials and Methods: The co-precipitation method was used to synthesize magnetic powder activated carbon and its properties were analyzed by SEM and XRD analysis. Then, the effect of the parameters such as pH, contact time, absorbent dose, initial concentration of catechol and temperature on the efficiency of adsorption process were investigated using a response surface methodology (Box–Behnken). The residual concentration of catechol was measured by HPLC at 275 nm.
Results: The results showed that the maximum efficiency of the adsorption process was obtained at concentration of 20 mg/L, pH=3, contact time 90 minutes, at 25 °C and absorbent dose of 1.5 g/L. The study of isotherm and kinetics showed that the experimental data of the catechol adsorption process correlated with the Langmuir and pseudo-second order models, respectively. Thermodynamic study of the reaction also expresses the Exothermic and Spontaneous process.
Conclusion: The results showed that the adsorption process using powder activated carbon magnetized with Fe3O4 nanoparticles at acidic pH had better efficiency. As a result, the studied process as an effective, rapid and inexpensive method for removal of catechol from aqueous solutions is proposed. Due to its short reaction time, it is economically affordable process.
Keywords: Adsorption, Catechol, Magnetic powder activated carbon, Iron oxide nanoparticles, Response surface method
Type of Study: Research |
Subject:
wastewater
Received: 2018/12/1 | Accepted: 2019/06/25 | Published: 2019/09/4
Received: 2018/12/1 | Accepted: 2019/06/25 | Published: 2019/09/4
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
