Volume 14, Issue 4 (3-2022)
ijhe 2022, 14(4): 695-708 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Omrani P. Utilisation possibilities of textile waste for the production of medium density fiberboard. ijhe 2022; 14 (4) :695-708
URL: http://ijhe.tums.ac.ir/article-1-6616-en.html
URL: http://ijhe.tums.ac.ir/article-1-6616-en.html
Wood Science and Technology Department, Faculty of Materials Engineering & Interdisciplinary Sciences, Shahid Rajaee Teacher Training University, Tehran, Iran , pantea.omrani@gmail.com
Abstract: (1263 Views)
Background and Objective: Nowadays, in metropolitan areas, principled and hygienic waste management is very important. Recycling is one of the most appropriate options in waste management. Hereof, the present study was aimed to investigate the possibility of using textile waste fibers in the manufacture of Medium Density Fiberboard (MDF).
Materials and Methods: This experimental study was performed on lab-scale. Fabric waste was prepared by separation method at source from a clothing manufacturer in Tehran and converted into fibers. Test boards were made with weight percentage of mixing textile waste fibers to industrial fibers at three levels of 0:100, 10:90 and 15:85, respectively, 10% urea-formaldehyde adhesive, with 16 mm thickness and 0.7 g/cm3 density by hot press. Then, properties of the boards were measured including bending strength, modulus of elasticity, internal bond, hardness, water absorption and thickness swelling. The results were analyzed with ANOVA test.
Results: The results of ANOVA showed that the effect of textile waste fibers on the bending strength, modulus of elasticity and swelling thickness of 2 and 24 hours of boards made at 5% probability level was significant. Additionally, the highest values of physical and mechanical properties are related to made boards with 10% of textile waste fibers.
Conclusion: The results showed that it is possible to make MDF with textile waste fibers. The use of wastes such as fabrics in the production of new functional products can be considered as one of the strategies to reduce waste and thus to maintain human health and the environment.
Materials and Methods: This experimental study was performed on lab-scale. Fabric waste was prepared by separation method at source from a clothing manufacturer in Tehran and converted into fibers. Test boards were made with weight percentage of mixing textile waste fibers to industrial fibers at three levels of 0:100, 10:90 and 15:85, respectively, 10% urea-formaldehyde adhesive, with 16 mm thickness and 0.7 g/cm3 density by hot press. Then, properties of the boards were measured including bending strength, modulus of elasticity, internal bond, hardness, water absorption and thickness swelling. The results were analyzed with ANOVA test.
Results: The results of ANOVA showed that the effect of textile waste fibers on the bending strength, modulus of elasticity and swelling thickness of 2 and 24 hours of boards made at 5% probability level was significant. Additionally, the highest values of physical and mechanical properties are related to made boards with 10% of textile waste fibers.
Conclusion: The results showed that it is possible to make MDF with textile waste fibers. The use of wastes such as fabrics in the production of new functional products can be considered as one of the strategies to reduce waste and thus to maintain human health and the environment.
Type of Study: Research |
Subject:
General
Received: 2022/01/15 | Accepted: 2022/02/22 | Published: 2022/03/16
Received: 2022/01/15 | Accepted: 2022/02/22 | Published: 2022/03/16
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
