Volume 16, Issue 4 (3-2024)
ijhe 2024, 16(4): 787-804 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Masoumbeigi H, Motalebi Peykani D, Ghanizadeh G, Akbari Jour H, Esmaeili M. Risk identification and assessment in a battery-manufacturing industry using FMEA method, and estimating the ratio of the cost of accidents to prevention. ijhe 2024; 16 (4) :787-804
URL: http://ijhe.tums.ac.ir/article-1-6732-en.html
URL: http://ijhe.tums.ac.ir/article-1-6732-en.html
Hossein Masoumbeigi1 
, Davood Motalebi Peykani2 , Ghader Ghanizadeh * 3, Hamed Akbari Jour4 , Maryam Esmaeili5
, Davood Motalebi Peykani2 , Ghader Ghanizadeh * 3, Hamed Akbari Jour4 , Maryam Esmaeili5
1- Health Research Center, Life Style Institute, Baqiyatallah University of Medical Sciences, Tehran, Iran AND Department of Environmental Health Engineering, Faculty of Health, Baqiyatallah University of Medical Sciences, Tehran, Iran
2- Department of Environmental Health Engineering, Faculty of Health, Baqiyatallah University of Medical Sciences, Tehran, Iran
3- Department of Environmental Health Engineering, Faculty of Health, Baqiyatallah University of Medical Sciences, Tehran, Iran AND Health Management Research Center, Life Style Institute, Baqiyatallah University of Medical Sciences, Tehran, Iran ,qanizadeh@yahoo.com
4- Health Research Center, Life Style Institute, HSE Department, Baqiyatallah University of Medical Sciences, Tehran, Iran
5- Department of Internal Surgery Nursing, Faculty of Nursing and Midwifery, Shahid Beheshti University of Medical Sciences, Tehran, Iran
2- Department of Environmental Health Engineering, Faculty of Health, Baqiyatallah University of Medical Sciences, Tehran, Iran
3- Department of Environmental Health Engineering, Faculty of Health, Baqiyatallah University of Medical Sciences, Tehran, Iran AND Health Management Research Center, Life Style Institute, Baqiyatallah University of Medical Sciences, Tehran, Iran ,
4- Health Research Center, Life Style Institute, HSE Department, Baqiyatallah University of Medical Sciences, Tehran, Iran
5- Department of Internal Surgery Nursing, Faculty of Nursing and Midwifery, Shahid Beheshti University of Medical Sciences, Tehran, Iran
Abstract: (528 Views)
Background and Objective: The health and safety of the employees of any industry is one of the most important issues to prevent the occurrence of accidents. This study aimed to identify and assess related risks in a battery-manufacturing industry using FMEA method and estimate the ratio of the cost of accidents to prevention.
Materials and Methods: In this descriptive and analytical study, the production activities of the industry were first identified. Then the work process, employee duties, and Potential risks were determined by the HAZID method. Evaluation and prioritization of risks were done using FMEA method. Risks whose RPN was higher than 145 were determined as important risks and the ratio of incident cost to accident prevention was calculated.
Results: In 62 active units of this industry, 716 risks were identified and prioritized, 16 of which (2.23%) had RPN above 145 with the highest priority. The financial pulp unit with falling and fire hazards and the assembly unit with the risk of fumes and lead dust leakage with RPN 245 were among the most dangerous units and hazards identified in the industry. In all units except one unit, the ratio of the cost of accidents to prevention varied from 1.2 to 25.
Conclusion: The results showed that it is necessary to consider the correction of the important risks by the industry officials, according to the set priorities so that potential accidents caused by these risks are minimized. This prioritization can play an effective role in optimal risk management and reduce related costs.
Materials and Methods: In this descriptive and analytical study, the production activities of the industry were first identified. Then the work process, employee duties, and Potential risks were determined by the HAZID method. Evaluation and prioritization of risks were done using FMEA method. Risks whose RPN was higher than 145 were determined as important risks and the ratio of incident cost to accident prevention was calculated.
Results: In 62 active units of this industry, 716 risks were identified and prioritized, 16 of which (2.23%) had RPN above 145 with the highest priority. The financial pulp unit with falling and fire hazards and the assembly unit with the risk of fumes and lead dust leakage with RPN 245 were among the most dangerous units and hazards identified in the industry. In all units except one unit, the ratio of the cost of accidents to prevention varied from 1.2 to 25.
Conclusion: The results showed that it is necessary to consider the correction of the important risks by the industry officials, according to the set priorities so that potential accidents caused by these risks are minimized. This prioritization can play an effective role in optimal risk management and reduce related costs.
Keywords: Risk assessment, Accident prevention, Failure mode effect analysis, Battery-manufacturing industries, Risk priority number
Type of Study: Research |
Subject:
General
Received: 2022/12/8 | Accepted: 2024/01/21 | Published: 2024/03/5
Received: 2022/12/8 | Accepted: 2024/01/21 | Published: 2024/03/5
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
