Iranian Journal of

Background and Objectives: Heavy Metals in Water resources is one of the most important environmental problems of countries. Up to now various methods of removing of these metals is considered, which is including using of low prices materials. In this study the potential of banana shells was assessed for adsorption of heavy metal ions such as Pb and Cd from aqueous solution.
Materials and Methods: Banana shells were pretreated separately with 0.4 mol/L NaOH, 0.4 mol/L HNO and distilled water and their adsorption ability were compared. Batch adsorption experiments were carried out as a function of the initial ion concentration, pH and adsorbent dosage. Adsorption isotherms of metal ions on adsorbents were determined and correlated with common isotherm equations such as Lungmuir, Freundlich and BET models.
Results: The maximum adsorption capacities were achieved by alkali modified banana shells (36 mg/g) for Pb and by acidic modified banana shells (16 mg/g) for Cd. Experimental results showed that the best pH for adsorption was 6 and the adsorption values decreased with lowering pH. Isotherm models indicated best fit for Freundlich model for modified banana shells.
Conclusion: In comparing the parameters of models, it was observed that the capacity of banana shells for adsorption of lead is higher  than for adsorption of cadmium, but the adsorption of  cadmium is stronger than the adsorption of lead.

Background and Objectives: Heavy metals processing industry has always been a major cause of concern which affects soils, surface waters, ground waters and river sediments contaminations. Thus, the Zanjan Zinc and Lead Smelting Plant has been considered as a potential source of contamination.
Mterials and Methods: This cross-sectional study has been conducted in February 2008 in the site region .The concentrations of Lead, Zinc and Cadmium have been assessed. The samples have been taken from 17 wells and atomic absorption spectrophotometeric method has been used to assess the samples. In order to find out and locate the exact situation of the wells under study, Global Positioning System instrument has been used. The correlation between the concentration of each metal and the distance of studied well from the plant has been assessed too.
Results: The findings of this study showed that lead and cadmium concentrations were 53% and 59% respectively out of the guideline values of World Health Organization.
Conclusion: The concentration of Zinc was lower than both national and international values in all samples. As the heavy metal concentration is very important for human health status, the other fields of study like heavy metal air pollution effects and related diseases and conditions should be studied and assessed.

Background and Objectives: Bottled water is a main beverage at many developed and developing countries. It can be polluted with chemical agents. One of these agents is nitrate which affects the safety of bottled and mineral water and cause healthy effects on consumer health. Today&aposs consumption of bottled water get a grate develop, thus infer of the quality of this matter is compulsive for each consumer.
Materials and Methods: A descriptive-analytical and cross- sectional study was done with the aim of determination of nitrate in bottled water available in market of Tehran City in 2007. In this study, 18 samples of six various manufacturers of product were examined.
Results: Results showed that the mean of nitrate is 9.02 mg/L and all samples have nitrate bellow 50 mg/L and they are at the standard level. Also, the results of the examinations have good correspondence with the concentration of nitrate on bottled water labels and according to statistic meaningful relation, was considered.
Conclusion: The nitrate content of these bottled water available in market of Tehran city is located at the level of national and global standards and it can not be a serious problem for health of consumer.

Background and Objectives: Silica is an inorganic material that found in the nature in various forms. The hazards of crystal of silica or α-quartz (free silica) is greater than other forms. Exposure to dust that contains free silica result to pulmonary injury and result to silicosis and death finally. The present research was conducted in order to evaluate the level of workers exposure to free silica in air of Khaf Iron stone quarries.Materials and methods: The exposure level to total and respiratory dust measured based on personal and environmental sampling methods and concentration of dust determined based on gravimetric method. For determination of amounts of free silica, dust samples analyses based on X-ray diffraction (XRD) method, and results compared with standard levels.Results: The maximum amount of total dust and free silica measured in stone breaking station (800±155mg/m³ and 26.11±6.7 mg/m³) and minimum of them measured in official and safeguarding station (8.28±2.2 mg/m³ and 0.012±0.0019 mg/m³). The maximum amount of respiratory dust and free silica measured in red mound digging number 1 (66.14±13.45 mg/m³ and 1.48±0.39 mg/m³) and minimum of them measured in air hammer machine station (5.26±2.62 mg/m³ and 0.01±0.005 mg/m³).Conclusion: Amount of total dust only in official and safeguarding station was lower than standard levels of Iran. Amount of respiratory dust in all stations was greater than Iran standard levels. Furthermore the level of respiratory free silica only in airy hammer machine station was lower than standard level of Iran. Regarding to this amounts it is so essential to that with applying different methods generation and emission of dust protected.

Background and Objectives: Measurement of light intensity is a recommended practice for insuring the delivery of required germicidal dose in disinfection operations by UV lamps. Use of sensitive to light chemicals which is the base of actionometeric methods could be considered as a suitable manner for estimating the intensity of UV lamp in circumstances that special radiometers are not available.
Materials and Methods: lodide-iodate mixture was used as an actinometer for this study. The light intensities of a UV lamp (LP 25W) were first determined by a special UVC ‌radiometer at certain distances from the lamp. Then the test of determining the suitable period of time for irradiation of actinometer was accomplished.  Finally، the color changes of iodide - iodate solutions at the predetermined distances were evaluated at the wavelength of 352 nm. The latter analysis can be done by a common (visible) spectrophotometer.
Results:‌ Results indicated that use of this actinometer is more suitable at the distances of 35 to 60 cm from the center of the lamp bulb، since iodode-iodate solution has a detectable color change at this range of distance in one minute irradiation which may be considered as a reasonable time for actionmeteric operations.
Conclusion:  Although all kinds of actinometers should not be regarded as precise as special radiometers and there would be need to use pure chemicals for actinometeric determination of light intensity، it can be claimed that the recommended procedure in this study which is the newest actinometeric method can be used in acceptable evaluation of UV intensity with least difficulty in providing necessary instruments.

Background and Objectives: Conducted studies about arsenic have shown that consumption of water contaminated with arsenic can causes different adverse health effects in consumers. World Health Organization (WHO) has enacted 10µg/L arsenic in drinking water as a guideline value. Regarding some reports about arsenic presence in a village of Hashtrood county and related health effects and also considering this fact that determination of arsenic as a poisoning chemical is not included in routine monitoring of water by responsible organizations, in present study all of drinking water sources in Hashtrood county in East Azerbaijan province were studied for arsenic presence.
Materials and Methods: Water supply and its sanitation situation were studied in all of cities and residential villages (200 villages) by field visiting. Arsenic content of water samples were determined using Ez arsenic test kit, a product of Hach Company. For assurance of the kit results, 20 water samples with different concentration of arsenic were analyzed using Inductively Coupled Plasma (ICP) method and then achieved results was compared together.
Results: Arsenic was present in drinking water of 50 villages that in 9 villages its level was higher than Iranian standard (50µg/L). During the study totally 11087 persons (21.96% of rural areas population) in Hashtrood county were exposed to different levels of arsenic via drinking water. Correlation between kit and ICP results was significant (R² = 0.9715)
Conclusion: Studied region in present study is a polluted area to arsenic by geogenic sources. It is necessary to replace water source of villages with higher level than national standard with safe drinking water. Annually measurement of arsenic in drinking water of all villages spatially polluted villages should be considered by responsible organization e.g. Health Network and Rural Water and Wastewater Company. Used kit in our study is recommendable for this purpose.

Background and Objectives: In the recent years Municipal Solid Waste (MSW) has been one of the most important environmental concerns to throughout regions of Iran. Sound MSW management for any area needs to the reliable data in which present the actual MSW condition in that area. The aim of this study is express of integrated view of MSW in Iran.
Materials and Methods:  In this study we collect the data from various municipal regions of Iran, to represent the roughly integrated view of MSW management situation in Iran. In this paper quantity, average generation rate, physical composition, and types of disposal methods in all of municipal regions of Iran also were investigated.
Results: Results from this study has shown that the amount of MSW generated in all of the municipal regions of Iran was 10370798 tons per year, and the average generation rate of MSW was 0.64 kg/capita/day. Results showed that only 6% of MSW was recycled, 10% was treated at organic waste (composting) plants, and about 84% was disposed of in landfill.
Conclusion: According to obtained results from this study and compare  MSW composition of Iran to some countries, its found that MSW properties in Iran is near to MSW properties in Low-income countries. Since the most of MSW in Iran contain organic fraction, there is a high potential to develop of composting industry.

Background and Objectives: Natural organic matters (NOMs) are abundant in natural water resources and in many ways may affect the unit processes in water treatment. Although NOMs are considered harmless but they have been recognized as disinfection by-products (DBPs) precursors during the chlorination process. Formation of DBPs highly depends on the composition and concentration of NOMs. The objective of this study was to determine natural organic matter and its fractions concentrations in the surface water sources of Tehran.Materials and Methods: Water sampling was conducted monthly between May to July in three rivers of Lar, Jajrood and Karaj, as the main drinking water supplying sources in Tehran. Quantitative parameters of pH, EC, UV₂₅₄ and DOC were studied based on standard methods. The XAD-7 resin method was used for fractionation of NOMs.Results: Results showed that NOM concentrations in Lar, Jajrood and Karaj rivers were 8.53, 12.9 and 11.3 mg/L, respectively. The HPO (hydrophobic) fraction was predominant compared to the HPI (hydrophilic) fraction in water samples. The mean of total percent of HPO and HPI fractions were about 57% and 43%, respectively.Conclusion: Since the hydrophobic NOM fraction exhibits higher trihalomethane formation potential (THMFP) than hydrophilic part, Tehran water chlorination exhibits higher THMFP than haloacetic acid formation potential (HAAFP). The information obtained from this study may be further employed in the design of the control techniques and management strategies for the water treatment plant, especially for DBPs reduction.

Background and Objectives: Upflow Sludge Blanket Filtration (USBF) system is a modification  of the conventional activated sludge process that incorporates an anoxic zone with an upflow sludge blanket filtration clarifier in one bioreactor. It has no inherent capacity limits and is used in a wide range of applications in municipal, industrial and agricultural wastewater treatment. The main objective of this study was to evaluate the performance of a continuous USBF reactor for the treatment of sugar industrial wastewater.
Materials and Methods: Sixty liter laboratory pilot scale plant was made of plexiglass consists of   14 liter anoxic zone, 38 liter aerobic zone and 8 liter clarifier. Used molasses for raw wastewater was obtained from Varamin Sugar Company. During the study, the wastewater has been initially fed to anoxic zone of the bioreactor. It mixed with recycled activated sludge returned from the clarifier and the mixed liquor entered into aerobic zone of the bioreactor. From aeration zone, the mixed liquor passed through the sludge zone at the bottom of the clarifier which was then separated by upflow sludge blanket filtration and then the clear water discharged from the system. To complete the internal circulation loop, collected activated sludge at the bottom of the clarifier was recycled to the anoxic zone.
Results: Experimental studies indicated that average removal efficiency of COD with HRTs from 21  to 26 hours in the aerobic zone and from 8 to 10 hours in the anoxic zone were from 77 to 97 percent depended on input feed (1000 to 30000 mg/L).
Conclusion: USBF as an advanced biological process had a proper COD removal efficiency for the biological treatment of sugar industries wastewater compared to other researchers methods.

Background and Objectives: In the production of some high-consumed food products like cake, biscuit, chocolate and spaghetti water is used in the preparing of primary material and in the kneading processes. At the present study microbiological and chemical quality of consumed water in food industries of East Azerbaijan Province were studied.
Materials and Methods: Eleven factories with different products were selected. Water samples were collected and analyzed regarding the microbiological contamination and chemical parameters, and heavy metals. In addition, condition of water quality in selected industry was surveyed during the summer.
Results: According to the results, monitoring of water quality in the studied industries is not suitable. The chemical characteristics of consumed water in those industries had major differences. Ni, Cr, Zn, Fe and Mn were present in all analyzed water but in lower concentration than national Maximum Contaminant Level (MCL). Pb was measured in higher concentration than MCL in spaghetti factory no. 2 and close to MCL in wiener and frankfurter and sugar industries. Cd was close to MCL in spaghetti factory no. 2 and wiener and frankfurter industries.
Conclusion: It was concluded that for the safety and health of food products the food industries should use the public water supply system as water source at least in food processing units or in the units of preparing of primary materials. Also for the preventing of chemical pollution of food products it is necessary, pay more attention to the subject of water quality control according to the special water standard of food industries, and using less volume of water in some food industry isn.t acceptable reason for neglecting of water quality monitoring and assessing. In addition it is required to analyze heavy metals in the final products of those industries.

Background and Objectives:Nowadays vermicompost production of food wastes is posed as one of appropriate methods to food wastes. disposal, its production used in agriculture and gardening. Moreover this process has some by products beside useful fertilizer that one of them is the worms. we can use them in variety of products specially in production of poultry and fish food. So determination of optimal condition for operating vermicompost production process of food wastes and worms. growth in these wastes is important. The aim of this study was determination of optimal temperature and moisture range for process progression in vermicompost production of food wastes.
Materials and Methods: In this study we used Eisenia foetida species. Process performed in pots with 15 cm (h) and 12 cm (d) and in a mouth period of time. Three ranges of temperature including 5-15, 15-25, 25-35 oC and three ranges of moisture including 55-65%, 65-75%, 75-85% were applied in this study.
Results: Multivariate analysis was used for analyze of results and it showed that influence of temperature and moisture on C:N ratio is significant in vermicomposting process (p <0.05).
Conclusion: The results showed that the range of temperature 15-25 oC is more appropriate for operating of process. Due to these study.s results with increasing or reduction of ambient temperature, like summer and winter, conservation of moisture around the range of 65-75 %, is effective in better performance of the process. According to this study.s results, it seems that the temperature of 15- 25 oC and moisture of 65-75% are better conditions for worm.s growth.

Background and Objectives: Recycling is one of the best alternatives in solid wastes management.  Recycling has few benefits from the viewpoint of economics and environmental. Paper and cardboard are the valuable recyclable materials in solid wastes. The rate of paper recycling is 35% in world. The major production source of paper and cardboard wastes is private and governmental offices and organizations. To be informed about paper production is very important in the solid wastes recycling.Thus, the aim of this study was to determine production rate of paper and cardboard waste and also to determine paper recycling potential in the 20 head offices of Mazandaran province.
Materials and Methods: This study was conducted in the 20 head offices of at province center. The  offices were selected by chance. This study was conducted four months in 2006. paper waste was separated after suspension of work. Collected material weighed on the sensitive scales. Separation and measuring was done for a week per month.
Results: The results showed that more than 2 tons of paper waste was produced in the twenty offices.  The maximum and minimum of paper production was in education and recycling organization, respectively. The maximum and minimum of production rate was 2.08 and 0.192 kg per capita in month that was in the education and Jihad-e-Agriculture organization, respectively. Also the maximum and minimum of paper waste was produced at first work day of week (Saturday) and last work day of week (Thursday), respectively. However, it was not significantly (P >0.05). Paperrecycling operation and marketing was done in an office.
Conclusion: Findings of this study indicated that office solid waste management needs more notice  in Iran. And also calculations showed that paper recycling is economical.

Background and Objectives: A conventional treatment to stabilize the excess activated sludge is the aerobic digestion process but due to long aeration time, it requires large equipments as well as high investment cost. Because of high oxidation potential of ozone, sludge ozonation enhances stabilization rate and reduces sludge treatment equipment size and cost. Therefore, in this study, the combination of pretreatment with ozone and aerobic digestion processes were investigated.
Materials and Methods: The experimental set-up consisted of an ozone generator and ozonation reactor with the total volume of 2 L. Removal percentages of TSS, VS, total and soluble COD, HPC, fecal coliform and settable solids were measured in integrated process compared to the single ones.
Results: The results of this research indicated that the aerobic digestion of waste activated sludge during 10 days could reduce 38% of volatile solids and thus obtaining the EPA standard. Also, the results of combined ozonation and aerobic digestion revealed that the pre-ozonation at 0.25 g O3/g TS or 0.5 g O3/g TS with 6 or 3 days aeration, respectively, could achieve 38% reduction in VS and hence the requirement set by EPA. Therefore, integration of pre-ozonation with aerobic digestion can significantly reduce the digestion time to attain the standards.
Conclusion: The sludge pre-ozonation with low dose of ozone due to solids disintegration can enhance the efficiency of aerobic digestion in waste activated sludge stabilization, and consequently decrease size of equipments, air requirement, investment and probably operation cost.

Background and Objectives:

handling of food and money contributes to the incidence of food-related public health incidents.

The objective of this study was to determine the total bacterial count and the presence of food borne

bacterial pathogens on Iranian currency notes, collected from food-related shops.

Materials and Methods: A total of 120 Iranian currency notes, comprising notes in four  denomination (2000, 5000, 10000 and 20000 R) were collected from various food-related shops including, butchery, bakery, confectionary, fast food, ice cream and poultry meat shop. The currency notes were categorized into three groups according to their physical conditions. All currency notes were examined for total bacterial count, Escherichia coli, Staphylococcus aureus, Bacillus cereus, Salmonella and Listeria according to the standard techniques.
Results: The average number of total bacterial count in four denomination of currency notes (2000,  5000, 10000 and 20000 R) were 118.49, 106.32, 69.44 and 220.81 CFU/cm2, respectively. The association between total bacterial count and denomination of the currency was not statistically significant. Of the 120 currency notes on which bacteriological analysis was conducted 13.3 %, 32.5% and 10.8 % were contaminated with E. coli, S. aureus and B. cereus, respectively. Salmonella and Listeria were not isolated from samples. Currency notes collected from butchery, bakery, confectionary, fast food, ice cream and poultry meat shop were contaminated with E. coli at the rate of 60, 0, 5, 5, 0 and 10 % with S. aureus at the rate of 55, 30, 10, 25, 40 and 35 % with B. cereus at the rate of 0, 10, 20, 5, 20 and 10 %, respectively. There was not a statistically significant association between physical condition and bacterial contamination of the currency notes. The effect of presence or absence of cashier in food-related shops on bacterial contamination of the currency notes was also evaluated.
Conclusion: Money has got the potential to change through many different hands and could be  exposed to many different environments at a relatively high frequency. Since there is very little information regarding the hygienic history of any forms of currency, great care should be taken when the same person facilitates the handling of money and the preparation and handling of food to avoid cross contamination.

Background and Objectives: Atmospheric transport is a key mode of microbial dispersal and the transmission of airborne microbe can have significant impacts on human health. The main objective of this study was to determine the concentrations of airborne bacteria in a children.s hospital.
Materials and methods: Three sampling points were selected. Airborne bacteria were collected with 6 days interval at each location using Quick take 30® sampler at an sampling rate of 28.3 l min-1 from November 2007 to March2008.
Results: The results showed that the highest indoor density of bacteria was 429 CFU/m3 that founded in oncology ward. Bacteria identified were representative of normal flora of the skin, respiratory and gastrointestinal tracts.
Conclusion:Our analysis revealed that colony of bacteria in 14% in patient room exceeded available guideline value for indoor air quality. That 11% cases was found in the oncology ward.

Background and Objectives:Groundwater treatment by nano particles has received increasing interest in recent years. Chromium is a commonly identified contaminant in soils and groundwater. Zero-valent iron, as a natural reduction agent can be used in controlling of contaminated sites. The aim of this research is investigation of hexavalent chromium removal from aqueous solutions by using of iron nano particles the effective parameters. Materials and Methods: In this research the synthesized of the iron nano particles has performed by addition of NaBH4 to FeCl3·6H2O solution and Cr(VI) reduction efficiency in Batch system was studied. Also the impact of the important field parameters including pH, initial chromium concentration, nano zero valent iron concentration and retention time were investigated.
Results:The results of this research showed that synthesized particles were in nano scale. In pH=3, chromium inlet concentration of 10 mg L-1, nano zero valent iron concentration 0.5 g L-1 and 2 minute retention time, 100% of Cr(VI) was removed.
Conclusion:The concentration of nano zero valent iron had significant effect on the reduction of Cr(VI).The reaction occurred in a wide range of pH value and the reaction efficiency increased significantly with decreasing initial pH. The significant removal efficiency, high rate of process and short reaction time were showed that iron nano particles have significant potential in removal ofCr(VI) from contaminated water.

Background and Objectives: Experiments were conducted to investigate the behavior of Moving Bed Biofilm Reactor (MBBR) as a novel aerobic process for treatment of aniline synthetic wastewater as a hard biodegradable compound is commonly used in number of industrial processes. The objective of this paper is evaluation of MBBR in different conditions for treatment of aniline and determination of reaction kinetics.
Materials and Methods: In the MBBRs, different carriers are used to maximize the active biofilm surface area in the reactors. In this study, the reactor was filled with Light Expanded Clay Aggregate (LECA) as carriers. Evaluation of the reactor efficiency was done at different retention time of 8, 24, 48 and 72 hours with an influent COD from 100 to 3500 mg/L (filling ratio of 50%). After obtaining removal efficiencies, effluent concentration of aniline was measured by adsorption spectrum and maladaptive municipal wastewater treatment plant sludge in batch conditions for confidence of aniline biodegradation and its adsorption to the sludge mass.
Results:The maximum obtained removal efficiencies were 91% (influent COD=2000 mg/L) after 72 hours. Biodegradation of aniline in MBBR has been also approved by NMR spectrum tests. Finally experimental data has indicated that Grau second order model and Stover-Kincannon were the best models to describe substrate loading removal rate for aniline.
Conclusion:biological treatment of aniline wastewater compared to other researchers methods.

Backgrounds and Objectives: Now a days modified activated sludge ways are used for standard removing nutrient substances from waste water that is named Enhanced biological phosphorus removal One of the most suitable ways is Anoxic-Oxic(A/O) process. The goal of this research is investigation and solving existing problems of Khoy power plant(P.P) waste water treatment plant(WWTP)and optimizing of phosphorus removal in it.
Materials and Methods: This research is done full scale in this treatment plant. The treatment plant was operating with extended aeration process, and some problems had, so in the first stage with in investigation of total efficiency, problems and their reasons determined. In the second stage after operational modifications existing problems was solved and real efficiency of treatment plant particularly for phosphorus(P) removal determined. In the third stage changes, system converted to A/O process and new system was tested with Changing parameters like food/microorganism(F/M), return sludge ratio(RAS)and sludge retention time(SRT)
Risults: In the first stage the most important problems were over concentration of BOD,TSS, and P in effluent of treatment plant and overgrows of alga observed in parts of treatment plant and effluent receiving conduit. The main reason of high concentration of P was considered releasing of sludge. In the second stage operating condition modification efficiency of P removal increased from 50to 62 percent. In the end of third stage value of P removal reached to %82 and the most suitable of anoxic contact time was determined 3to4 hours, SRT terry day and F/M ratio o.12,that the most effective change has been the decrease of SRT to three days.
Conclusion: Adjusting of operating factors like SRT,RAS, sludge processing way in WWTP can increase P removal in them with in total efficiency remaining, such as in this case it was %12. In waste water treatment particularly for P removal the A/O process is suitable so in this project its effect on P removal efficiency has been %20.

Background and Objectives : Propylene glycol is the main compound of anti-freezing chemicals. A significant amount of propylene glycol is released to the environment after application and contaminates the soil. The main objective of this study was to determine the biological removal of propylene glycol from wastewater and its degradation in soil by the isolated bacteria from activated sludge process.
Materials and Methods: In the present study, the sludge taken from the return flow in a local activated sludge treatment system was used as the initial seed. The performance of the bioreactor in treating the wastewater was evaluated at four different retention times of 18, 12, 6 and 4 h all with the inlet COD concentration of 1000 mg/L. This phase lasted around 4 months. Then, a part of the adapted microorganisms were transported from the bioreactor to the soil which was synthetically contaminated to the propylene glycol.
Results: The average of propylene glycol removal efficiency from the wastewater in detention times of 18, 12, 8 and 4 h in steady state conditions was 98.6%, 97.1%, 86.4% and 62.2% respectively. Also, the maximum degradation in soil was found to be 97.8%.
Conclusion: According to the results obtained from this study, it appears that propylene glycol is inherently well biodegradable and can be biodegraded in liquid phase and soil after a short period of adaptation.

Background and Objectives: Phenolic compounds are presence in many industrial wastewaters, and have been classified as priority pollutants. Application of several conventional processes due to high cost and low efficiency has been limited. Thus, new methods such as enzymatic polymerization seem to be preferable and effective processes with high potential to substitute the conventional processes. This study was carried out to evaluate Raphanus sativus extract as a peroxides enzyme source for polymerization and removal of phenol from synthetic wastewater in the presence of hydrogen peroxide.
Materials and Methods: The study was performed in batch reactor at room temperature. Peroxidase enzyme was extracted from Raphanus sativus plant roots . Primary concentration of phenol in wastewater was 100 mgl-1. The concentration of phenol and enzymatic activity was been measuredby photometric assay.
Results: The results show that Raphanus sativus extract is a suitable source of peroxidase enzyme. Mean enzymatic activities in this extract was 3.107 Uml-1. Also, our results showed that elevation of extract volume lead to high efficiency of phenol removal, in which the increase in the extract volume from 5 to 50 ml, resulted in the efficiency of processes increased from 7.6 to 98.2 %. Also, sequencing addition of H2O2 and extract has improved the effects. The phenol removal efficiency of the reaction time after 3 h with single and three stages adding of reactants was 84.2 and 93.1% , respectively.
Conclusion:Enzymatic polymerization can be used as an appropriate process for the removal of phenolic compounds from wastewaters. To meet the optimized condition in process, the ratios of phenol/ enzyme and H2O2/ phenol and sequences of the adding of reactants should be considered.