Showing 13 results for Aslani
R Dehghanzadeh, H Aslani, B Afshar Forugh Shams, B Ghoraishi,
Volume 3, Issue 2 (6 2010)
Abstract
Backgrounds and Objectives: Shortage of available water resource and deficiency of rainfall, increasing in population growth and industrial development, suitable use of water resources and pollution prevention is an essential issue in accord with sustainable development and environmental protection. Present study shows the qualitative status ofMehran River and determines its pollution or non pollution tomunicipal wastewater and to assess qualitative characteristics of the water according to international water quality index.
Materials and Methods:Padding strand of MEHRAN River from source to end has been done for wistful determination of branches, runoff and wastewater entrances, etc. Necessary decisions were made for determining sampling points and critical and effective points on water quality then water samples were analyzed to determine chemical and microbiological characteristics.
Results: Results showed the average of BOD5, COD, TSS, NO3, DO, pH, Turbidity and color are about 80±30, 155±58, 1013±637, 7.3±2, 4.5±3.5 mg/l, 7.2 ±1, 385±238 NTU, 122±70 TCU respectively.
Conclusion: It could be concluded that the Mehran River is completely polluted with municipal sewage and is unsanitary.Water quality index varies in the range of 41-52 and the water is classified as number 4. At present the river is in a dangerous ore toxic state and could not be considered as drinking water resource or needs more advanced water treatment units.
M Ghanbari, K Nadafi, M Mosaferi, M Yunesian, H Aslani,
Volume 4, Issue 3 (1 2011)
Abstract
Background and Objectives: Over the last three decades environmental pollutions became a more noticeable problem in all around of the world. In many countries, noise pollution as a basic problem has a great importance.Development of the city, increasing of industrial centers, increasing vehicles, other annoying noise resources and also little information about the noise pollution of Tabriz city, has led to the doing of this research.
Materials and Methods: Sampling and measuring of noise pressure levels was done 180 times According to the EPA standards, measuring was done simultaneously in two stations(commercial-residential areas), three times a day (morning 7:30 -9:30 am, midday 12:30-14:30 pm and night 19:00-21:00 pm) and 30 days in month.
Results: Sound pressure level in both stations was higher than the standards and the highest average level with 71.4 db was recorded in Raste-koche station at midday. Also lowest calculated average value with 68.5 db was measured in Golbad station at the morning time that is 8.5 db higher than the standards.
Conclusion: Average measured sound pressure level in two stations was higher than the standards. The results show that Tabriz has a noise pollution in commercial and residential - commercial areas. It is suggested that other noise pollution resources identified and the proper management actions for its reduction be done.
M Ghani, F Golbabaie, A.r Akbarzadeh Baghban, H Aslani, N Moharamnejad,
Volume 4, Issue 3 (1 2011)
Abstract
Background and Objectives: Particular importance of hazardous wastes is due to having characteristics such as toxicity, flammability, corrosively and reactivity. Some of the chemical wastes due to having hazardous materials must be collected and managed in a proper manner, since they are potentially harmful to the environment. Owing to the fact that educational centers have important roles in developing countries, so the main objective of the present study was to investigate, hazardous waste management in chemistry laboratories of Ministry of Science universities, in Tehran, Iran.
Materials and Methods: Study area of this research includes all chemistry laboratories in Tehran universities which were covered by Ministry of Science. To obtain the number of samples, based on Scientific Principles and identification formula, 64 samples were calculated. In addition, sampling was done by Stratified sampling. Validated checklists were used for data gathering. Data analysis were done by Descriptive statistics (mean, frequency and etc.) and inferential statistics (kruskal- wallis test).
Results: results obtained in this study indicate that Sharif University by obtaining the mean score of 60.5 and Tehran University by obtaining the mean score of 4.5-6 are placed in best and worst rank, respectively. Beheshty, Alzahra and Tarbiat Moallem univesities by acquiring the mean score of 20-28.5 have a same position in ranking table.
Conclusion: Results show that most of the studied laboratories do not have any collection program and only 26.5 percent of them have acceptable programs.The separation and storing program observed in about 12.5 percent . Hazardous wastes' management in chemistry laboratory of Tehran Universities was not in good status. And from the standpoint of management, only 12.5 percent of studied cases are in good status, while 75 percent was in undesirable status.
Mahmood Alimohamadi, Ebrahim Molaee Aghaee, Ramin Nabizadeh Nodehi, Gholam Reza Jahed, Sasan Rezaee, Akbar Goldasteh, Shahrokh Nazmara, Hassan Aslani,
Volume 5, Issue 2 (13 2012)
Abstract
MicrosoftInternetExplorer4
Background and Objectives: Heavy metals including antimony and cobalt as two
contaminant factors leach from polyethylene terephthalate packages into water
under some conditions. Therefore, their detection was concerned at different
storage conditions.
Materials and Methods: Five time-temperature treatments were carried out for 5 water samples. Storage
conditions were defined as following: at outdoor and sunlight ambient
temperature, room temperature, and at 40˚C at different intervals for 8 weeks,
at 65˚C for 6 weeks and 80˚C for 7 days. Detection was performed by ICP-AES
method and the data analysis was processed by SPSS software.
Results: Antimony
concentration increased by storage time at all temperatures and for all
samples, however enhancing proportion was different in samples. At outdoor,
40˚C and room temperature, concentration increase was below the MCL by the end
of storage period. But at 65˚C and 85˚C, antimony concentration exceeded MCL by
study time and the difference between samples 4 and 5, for example, was
significant (p≤0.05). Cobalt concentration at the beginning and during the
study was also too less and lower than the detection limit.
Conclusion: By
increasing temperature and time, leaching of antimony into water increases.
Moreover, sunlight has effect but not noticeable at the temperature of present
study. In this study, blue or clear packaging had no significant effect on
antimony leakage (P>0.05).
Ramin Nabizadeh Nodehi, Hassan Aslani, Mahmood Alomohammadi, Reza Nemati, Kazem Naddafi, Maryam Ghany,
Volume 5, Issue 2 (13 2012)
Abstract
MicrosoftInternetExplorer4
Background and Objectives: Irrigation of agricultural crops using wastewater will
increase, in some cases, their growth by 40 to 60 percent. However, this has a
high risks for human health because of the presence of higher number of
pathogenic organisms. The main purpose of this study was to investigate the
feasibility use of Fenton and modified Fenton with copper for the disinfection
of raw wastewater.
Materials and Methods: After primarily laboratory physicochemical and biological analysis, the
disinfection process was performed in three different phases in each process.
First, the disinfectants were injected separately, then we performed
disinfection using Fe++ and cu++ ions combined with hydrogen peroxide in order
to determine synergistic effect of each catalyst. Direct method was used for
fecal coliforms counting.
Results: Hydrogen
peroxide maximum efficiency for inactivation of fecal coliforms was only
0.66log inactivation. Fenton and modified Fenton with copper ions showed a
remarkable effect on the bacterial inactivation so that Fenton and modified
Fenton with 1 and 2 mg/l of Cu++ inactivated coliforms by 4.73, 3.28, and 4.88
log respectively.
Conclusion: Application of HP alone for the disinfection of raw wastewater is not
practicable due to low observed efficiency. However, its combination with ions
such as Fe++ and Cu++ increases HP performance in disinfection and has a
notable synergistic effect on HP
disinfection power, where, in the presence of each catalyst, hydrogen
peroxide can reduce the fecal coliforms of raw wastewater to meet the Iranian
Environmental Protection Agency Standards.
H Aslani, R Nabizadeh,
Volume 8, Issue 4 (3-2016)
Abstract
Background and Objectives: Considering the complexity, cost, and time-consuming techniques of detecting Cryptosporidium oocysts and Giardia cysts, B. subtilits spores have been introduced as microbial indicators of these pathogens to evaluate the efficacy of disinfection studies. The present study was aimed to investigate the feasibility of B. subtilis spores inactivation using hydrogen peroxide combined with copper and silver ions. A new glutaraldehyde based compound used for surface disinfection was also tested.
Materials and Methods: In order to sporulation, vegetative bacteria were allowed to grow on a medium with insufficient nutrients, and after 5 days incubation at 37˚C, spores were washed and purified. Spore suspension was used to prepare synthetic water. Disinfection efficiency was reported as logarithmic decrease of initial spore count.
Results: This research found that none of the disinfection compounds was able to spore inactivation in low initial concentration. The highest spore reduction efficiency was related to HP/Cu+2 with 1.48 log inactivation, and HP/Ag+ compound placed in the second rank with 1.03 log reduction. Maximum spore reduction of 0.6 log was achieved when glutaraldehyde based disinfectant was used in disinfection process.
Conclusion: According to the results, it can be concluded that spores are very resistant even to combination of disinfectants. Spore reduction potential of the studied compounds was as follows: HP/Cu+2> HP/Ag+> glutaraldehyde based compound.
B Ghoreishi, M Shaker Khatibi, H Aslani, A Dolatkhah, A Abdoli Seilabi, M Mosaferi,
Volume 9, Issue 1 (6-2016)
Abstract
Background and Objectives: Qualitative evaluation of sewage sludge before any kind of application is essential. The present study was aimed to investigate Total coliform, Fecal coliform and Salmonella in sewage sludge produced at wastewater treatment plants in Azerbaijan Province, Iran.
Materials and Methods: Nine wastewater treatment plants were chosen in East Azerbaijan Province, and their sludge from drying bed was studied. Total coliforms, thermo-tolerant coliforms, and Salmonella spp., were surveyed during winter time, 2015. Total and thermos-tolerant coliforms were enumerated by EPA method 1680 and salmonella was counted using EPA method 1682.
Results: In the case of total coliform, sludge sample from Jolfa with 1.82×106 MPN/g showed the highest contamination, while Sarab showed lowest fecal coliform count with 2.02×103 MPN/g. As in the case for fecal coliform, the bacteria count for thermo-tolerant coliforms was higher in Jolfa than other cities; on the other hand, Ahar with no fecal coliform count or less than 2.2 showed the minimum contamination rate to fecal coliforms. In case of Salmonella spp., sludge samples from Ahar and Bostan Abad did not show any salmonella. While sludge sample from Tabriz wastewater treatment plant was determined as the most contaminant sludge with bacteria count equal to 84 per g. Moreover, sludge sample from Sarab wastewater treatment plant showed the least contamination rate, and bacteria count was 6 per g.
Conclusion: From the stand point of microbial quality, all sludge samples met class B standards set by USEPA, while none of them could provide class A standards. Thus, special precautions must be taken in case of soil amendments by the sludge produced from wastewater treatment plants.
P Firouzi, H Aslani, A Aslhashemi,
Volume 11, Issue 4 (3-2019)
Abstract
Background and Objective: Nowadays, swimming pools as a sport and entertainment center have found more popularity. Violation of health based standards in terms of physicochemical, microbial and environmental health indices can turn pools into a potential source of disease transmission and spread. Due to the importance of maintaining swimmers’ comfort, health, and safety, the present study was aimed to consider environmental health status and physicochemical and microbial quality of swimming pools water in Tabriz.
Materials and Methods: In this descriptive cross-sectional study, the official checklists of swimming pools (consisting 10 public and 22 private swimming pools) were obtained from Tabriz Health Center. According to the inspections conducted in February 2017 and August 2017, the related information was extracted from the checklist. Data were analyzed using Excel software, SPSS version 23 and Chi-Square test.
Results: The average accordance of the physicochemical parameters with the standards for public and private pools was 67.5% and 65%, respectively. Among the physicochemical parameters, the residual free chlorine showed less accordance with the standards. On average, in the summer 49.5% and in the winter 28% of the pools showed microbial contamination.
Conclusion: The residual free chlorine values in the pool, Jacuzzi and chiller indicated a weak management of pools and a high potential for pathogenicity. Therefore, continual surveillance of the environmental health status and planning for an objective inspection program by the local authorities, especially in private sector, is suggested.
Bahareh Ghoreishi, Hassan Aslani, Mohammad Shaker Khatibi, Sepideh Nemati Mansur, Mohammad Mosaferi,
Volume 13, Issue 1 (4-2020)
Abstract
Background and Objective: Application of sewage sludge contaminated with heavy metals may cause health and ecological concern. Ecological risk and heavy metals content of sewage sludge from wastewater treatment plants of East Azerbaijan province were evaluated in the present study.
Materials and Methods: Nine composite samples were taken and analyzed for heavy metals. The geo-accumulation index (Igeo), contamination factor(CF) , and potential ecological risk index were calculated.
Results: Variation of the heavy metals concentrations were in the following order: Zn>Cu>Pb>Cr>Ni>As>Hg>Cd. The contents of some heavy metals were several order of magnitude higher than the crustal average (CA) values. Considering the Maximum Permissible Standards (MPS) and the Muller's index, the Cd, Cu, and Zn pollution were found to be in the moderate range, whereas As and Pb were in strongly polluted category; and Hg was in extremely polluted category. Considering MPS, the single-factor pollution index (PI) and the Nemerow’s synthetic pollution index (PN) were lower than 1 and 0.7 respectively. This indicated that the sludges were unpolluted with most heavy metals and could be safely applied for agricultural uses. However, a high potential ecological risk for As and Cd; very high risk for Pb; and extremely high risk for Hg were calculated when considering the CA values. There were significant differences between the levels of heavy metals and MPS (p <0.05).
Conclusion: Although the metal concentrations were below the MPS according to the US EPA regulations, sludge samples showed a high degree of potential ecological risk for the environment in comparision with the CA values,. Periodic monitoring of sludge quality are strongly recommended.
Najmeh Shahmahdi, Bahareh Ghoreishi, Hassan Aslani, Saeideh Ghaffarifar, Mohammad Shaker Khatibi, Mohammad Mosaferi, Abdolreza Shaghaghi,
Volume 14, Issue 4 (3-2022)
Abstract
Background and Objective: By accurately identifying environmental issues, individuals can acquire skills to better solve environmental problems. To this end, the most appropriate method is to assess the educational needs of individuals to pave the way for the promotion of environmental knowledge. The present study aims to assess the need for training courses to empower professionals to increase their knowledge of environmental issues and educate others to take an important step in improving environmental health in society.
Materials and Methods: The present study was a descriptive needs assessment study using Delphi technique. In the first stage, the designed questionnaire was given to 150 people (faculty members, experts and students) to express their opinions in the proposed areas. In the second stage, a supplementary questionnaire entitled General needs for faculty members, specialized needs for experts and general and specialized needs for students were provided to individuals and the importance of the issues from their point of view was examined. Finally, the most important issues were prioritized by experts. Data analysis was performed using SPSS-26 software.
Results: The total number of educational needs extracted from the first stage of Delphi was 120 items, of which 31 items related to general needs (11 teaching and evaluation areas, 10 research areas and 10 communication and personal development items) and 89 items related to specialized needs. (27 cases of air pollution, 23 cases of waste management, 17 cases of wastewater treatment and reuse of wastewater, 10 cases of water treatment and pollution and 12 cases of soil pollution and its removal methods). In the second and third rounds, the importance of these items was determined by the target groups by scoring, and at the end, the first five priorities of each item were identified.
Conclusion: The results of this study, considering the comprehensive review of three target groups and determining and prioritizing the needs for each group, can increase the level of environmental awareness and empowerment of experts, which ultimately enhance the efficiency of the system and is an important step for environmental educational planning.
Samira Sheikhi, Hassan Aslani, Reza Dehghanzadeh, Ammar Maryamabadi,
Volume 15, Issue 1 (4-2022)
Abstract
Background and Objective: Chlorpyrifos (CPF), an organophosphate pesticide, has been widely used in the agricultural industry and may cause environmental damage. The present study aimed to evaluate the potential application of Fe(VI) and Fe(VI)/PMS processes for oxidation of CPF in water after pretreatment with ferric chloride coagulant.
Materials and Methods: This study was performed in two phases including coagulation and flocculation process and advanced oxidation process (AOP). In the first phase, the coagulation process was performed for turbidity removal by ferric chloride (FeCl3). In this phase, using a central composite design (CCD) with R software, the combined effect of four variables including initial turbidity, initial pH, coagulant dose and contact time was investigated. The supernatant from this process was transferred to the next phase for further analysis. In the AOP phase, the effect of Fe(VI) and Fe(VI)/PMS oxidants were investigated separately.
Results: In the first phase (coagulation and flocculation), FeCl3 showed the highest efficiency (95.79%) at alkaline pH (pH=8). In the next phase (AOP), the results showed that the degradation efficiency of Fe(VI)/PMS process was higher compared to sole Fe(VI) process at all pHs. Also, by examining the reaction kinetics, it was found that after the coagulation process by FeCl3, the removal rate in the Fe(VI)/PMS process is 1.5 times higher than the Fe(VI) process.
Conclusion: Due to the high removal efficiency and higher degradation rate of Fe(VI)/PMS process, this technique can be used as a relatively effective method in removing chlorpyrifos from aqueous solution.
Samira Sheikhi, Aran Moshiri, Hassan Aslani, Shamseddin Alizadeh,
Volume 15, Issue 4 (3-2023)
Abstract
Background and Objective: One of the main ways of transmitting diseases is drinking water, so the safety of drinking water is an important issue for consumers, water suppliers, operators, and health officials. This study was conducted to identify and semi-quantitative evaluation and prioritization of risks in the drinking water supply system of Bostan Abad city.
Materials and Methods: In order to evaluate and document the key elements of WSP and identify the steps that need improvement, the quality assurance tool of the water safety plan (WSP-QA TOOL software) was used, and then based on the guide of the water safety plan from the WHO and the International Association Water safety, WSP team formed. Then the water supply system of Bostan Abad city from the farthest point of the basin to the last consumption point was inspected and described.
Results: The results showed that the highest number of risks are in the water supply sources, distribution network, and point of consumption, respectively. Also, the most vulnerable part of the system was identified as the disinfection unit and storage tanks due to biological and chemical contamination caused by equipment failure and improper preparation of chlorine solution.
Conclusion: In summary, it can be said that carrying out the necessary reforms can play an effective role in reducing the risk potential in times of crisis, which should be given serious attention by water industry officials.
Mohammad Mosaferi, Farhad Ghayurdoost, Reza Dehghanzadeh, Hassan Aslani, Sepideh Nemati Mansour, Neda Gilani,
Volume 16, Issue 1 (6-2023)
Abstract
Background and Objective: The trend of developments in the health system and medical education and other related sciences, including environmental health, is a global challenge. In this research educational content of environmental health and its revision were studied from the point of view of students and graduates.
Materials and Methods: The present study was a cross-sectional descriptive study. In this research, through two checklists, the opinions of environmental health students and graduates regarding the necessity of revising the educational content of the field according to the requirements of the time and considering the future situation were investigated with the participation of 441 people. Data analysis was performed using SPSS-22 software.
Results: According to the results, 73.7 percent of participants believed that the educational content of environmental health in Iran has fundamental differences from developed countries. 81.7 percent believed that the educational content provided to environmental health students is not proportional to their duties. Meantime, 91.4 percent of the graduates of environmental health believe that the expected capabilities included in the educational curricula of different degrees of environmental health should be revised. 88.4 percent believed that it is necessary to revise the educational content of this field considering the "change in executive and practical functions of environmental health during the past years".
Conclusion: The overwhelming majority of graduates of the field emphasized the need to revise the educational content of the environmental health field, taking into account the requirements of the time. It is necessary to redefine the field of environmental health in the country according to the changing situation and the emergence of new indicators.
