Showing 11 results for Bakhtiari
M. Fahiminia, A. Paksa, A. Zarei, M. Shams, M. Fazlzadeh Davil, H. Bakhtiari, M. Norouzi,
Volume 3, Issue 1 (3 2010)
Abstract
Backgrounds and Objectives: Domestic sewers and wastewater treatment plants are suitable places for the growth of some types of Cockroaches. Annually the water and wastewater company of Qom city make considerable attempts to overwhelm the problem. The current study is aimed to determine types of Cockroaches and select the optimal methods for their control.
Materials andMethods: In this study, 120 manholes are selected in different locations of Qom city, the numbers of Cockroaches are counted and the Cockroaches are classified into different groups. Then, each group are faced to different insecticides Including Simperator, Diazinon , Dursban Ec, Faikam, Sipermetrin, Icon, Deltametrina and Sulfac. One group of manholes was considered as blank sample during one month. Counting and determination of Cockroaches in these manholes conducted before using insecticides and also five months after it.
Results: the study showed that all sewers were 100% polluted by Cockroaches. The number of Cockroaches in manholes range from minimum 4 to maximum 3600 in each manhole. The applied of insecticides including Dursban Ec, Simperator, Sulfac, Dursban, and Deltametrina are used 2 gr in 100 square meter of area of each sewer. The Cockroaches population reduced to approximately zero after application of these insecticides. Spraying sewers by Simperator controlled 100% of Cockroaches.
Conclusion: the most effective method for the control of Cockroaches was usage of 2 gr of Dursban (Ec) in squaremeter of area in the beginning of warmseason.If we use 1-1/5months interval between the time of spraying insecticide in selected wells, with using simperator and dursban (Ec) we can overwhelm Cockroaches using Simperator and Dursban Ec. The results of statistical analysis show that reduction of number of coackroaches in one month after using poison is significant (P-value< 0.05). But after 5months it lose meaningful in all of them.Also, reduction of number of coackroachesin blank manholes was not statistically significant.
Abdulreza Mashroofeh, Alireza Riyahi Bakhtiari, Mohammad Pourkazemi,
Volume 6, Issue 3 (12-2013)
Abstract
Background and objective: Metal pollution has always been a major cause of contamination of environment and is considered as a major concern for food health. Worldwide, sturgeons are an important source of food and income. In this study, the human health risk due to consumption of caviar and muscle of Persian sturgeon (Acipenser persicus) were evaluated by measuring the concentrations of cadmium, nickel, vanadium and zinc in caviar and muscle samples.
Material and Methods: A total number of 24 samples of Persian sturgeon were collected from two important sturgeon fishery zones in Guilan and Mazandaran Provinces and were stored at −20°C until chemical analysis. About one gram of each sample dried was added to 10 ml of concentrated (65%) supra-pure HNO3 (Merck, Darmstadt, Germany) in a Teflon PTFE tube and then it was incubated for 1 h at 40 °C in a hot block digester, followed by heating at 140 °C for 3 h. The samples digested were diluted to a measured volume using double deionized water. Samples were filtered through Whatman No. 1 filter paper, and the filtrate was stored until metal determination.
Results: Mean Cd, Ni, V and Zn concentrations in muscle tissues were 0.005 ± 0.002, 0.06 ± 0.03, 0.13 ± 0.04 and 7.49 ± 3.07 µg/g wet weight basis respectively. The mean Cd, Ni, V and Zn concentrations in caviar samples were 0.007 ± 0.006, 0.09 ± 0.07, 0.12 ± 0.15 and 21.23 ± 5.75 µg/g wet weight basis respectively.
Conculation: The mean concentrations of Zn, Cd and V in caviar and muscle samples were less than the permissible limits proposed by the United Kingdom's Ministry of Agriculture, Fisheries and Food (MAFF 2000) and World Health Organization (W.H.O.). The guidelines for Cd, V and Zn are 0.2, 0.5 and 50 µg/g wet weight respectively. Therefore, the measured concentrations for these particular metals are below the published guidelines, and the levels would appear not to constitute any threat to the human population that may consume sturgeon or caviar obtained from these study locations.
Mehrnoosh Mohammadi, Alireza Riyahi Bakhtiari, Saber Khodabandeh,
Volume 6, Issue 4 (3-2014)
Abstract
Background and Objectives: Development of cosmetics industry has increased the affinity to use these products by people especially women for makeup and toilet. Due to the presence of metals such as lead and cadmium as preservative and colored element in these products, concentrations of these metals in sunscreen cosmetics, lipstick and hair color were determined. Materials and Methods: Different brands of cosmetics were analyzed to determine Cd and Pb concentration (in µg/kg dry weight) using graphite furnace atomic absorption (AA-670). Results: We found that generally mean concentration of Cd was lower than Pb. There was no significant difference of Cd level between different brands of sunscreen and lipstick (p>0.05), whereas, a significant difference of Pb between the brands studied was observed (p<0.05). No significant difference was obtained between concentration of Cd and Pb in various brands of hair color (p>0.05). Conclusion: Though levels of Pb and Cd in selected brands of cosmetics were lower than standard limits, their low concentration in compared with the results of previous research works could induce serious hazards on human health and the possibility of occurrence or exacerbation of disease including allergy, inflammation, skin diseases, cancer and so on. Hence, preparation and use of these products must be done according to current standards.
Z Bagheri, Ar Riyahi Bakhtiari,
Volume 7, Issue 1 (7-2014)
Abstract
Background and Objectives: The present study was designed to determine total mercury concentrations in sediment and the soft tissues of two bivalve species, Saccostrea cucullata and Callista umbonella, in coastline of Bandar Abbas in 2011. Materials and Methods: Generally, 67 bivalves and 10 sediment samples were collected from two stations (terminal of Bandar Abbas and tourism park of Soro). We measured total mercury concentrations in each sample using Mercury Analyzer (Leco AMA 254). Results: Means of mercury concentration were 145.58 and 151.13 (ng/g dw) in soft tissues of oyster S. cucullata and 34.5 and 63.95 in the soft tissues of Clam C. umbonella in two stations, terminal of Bandar Abbas and tourism park of Soro respectively. Total mercury concentrations were 30.27 and 20.55 (ng /g dw) in the sediment samples in two stations, terminal of Bandar Abbas and tourism park of Soro respectively. A significant difference was found in mercury concentrations between soft tissue of the two species (p <0.01). Conclusion: Considering higher concentration of mercury in the soft tissues of oyster S. cucullata than clam C. umbonella, lower coefficient of variation in soft tissue of oyster relative to clam C. umbonella, and also significant correlations between mercury levels in the soft tissue of oyster and sediments, it can be concluded that the soft tissues of oyster S. cucullata can be used as biomonitoring agent for mercury in intertidal zone of Bandar Abbas. In comparison with food safety standards (FDA, EU Commission and NHMRC), mercury concentrations in oysters were well within the permissible limits for human consumption.
Rokhsareh Azimi Yancheshmeh, Ali Reza Riyahi Bakhtiari, Samar Mortazavi,
Volume 7, Issue 2 (10-2014)
Abstract
Background & Objectives: In recent years, enterance of oil contaminants especially polycyclic aromatic hydrocarbons (PAHs) to Anzali Wetland, has seriously threatened organisms life. Therefore, the current study was conducted to determine and compare concentration of PAH compounds with multiple sediment quality assessment indice to evaluate the ecological toxicity of surface sediments of Anzali Wetland and present appropriate management strategy. Materials & Methods: We randomly collected 22 surface sediment samples each sample was dried and extracted based on the soxhlet method. Then during two-step of column chromatography the PAH compounds were separated and analyzed by gas chromatography equipped with a mass spectrometry detector (GC-MS). Results: Total concentrations of these compounds ranged from 212 to 2674 ng g-1 d.w. with the mean of 907 ng g-1 d.w. The highest concentrations of PAHs was reported from stations (3-1 and 4-1) located in the vicinity of urban areas with shipping activities. In comparison with sediment quality guidelines (SQGs) used in this study, the concentrations of most PAH compounds in the majority of stations situated in low range values of adverse biological effects. Only in a few stations (3-1, 3-2 and 5-3), the concentrations of some of PAH compounds exceeded the low range of adverse biological effects. Conclusion: In comparison with sediment quality guidelines (SQGs) used in this study, the concentrations of most PAH compounds in Anzali Wetland rarely lead to adverse biological effects. However, concentrations of some of these compounds can cause acute toxic effects. Therefore, further studies including toxicity and bioaccumulation tests and survey of benthic community composition, especially in areas exceeded SQGs are essential for proper management.
M. Nemati Varnosfaderany, A. Riyahi Bbakhtiari, Z. Gu, G. Chu,
Volume 7, Issue 3 (5-2014)
Abstract
Background and Objectives: Few investigations on polycyclic aromatic hydrocarbons (PAHs) in surface sediments have reported medium to high petrogenic contamination at the southwest coasts of the Caspian Sea. The aim of this study was to investigate distribution and potential sources of 16 PAH compounds in surface sediments of the southwest coasts of the Caspian Sea (Gillan province). Materials and methods: A total of 45 sediment samples from 15 stations at coasts of the Gillan province (from Astara to Lahijan) were collected from 10, 20, and 50 meters depths. Each sample was analyzed using Gas chromatography – Mass spectrometry. Diagnostic ratios were used for source identification. Results: The main PAH compounds in the study area were phenanthrene (87.6±74.6 ng/g), pyrene (43.1±23.5 ng/g), and naphthalene (34.4±40.4 ng/g) respectively. According to the calculated diagnostic ratios such as LMW/HMW (0.25-7.75), Ant/178 (0.02-0.11), Flu/202 (0.20-0.49), and B(a)Ant/228 (0.09-0.54) the main source of PAHs is petrogenic in this study area. Conclusion: According to PAH diagnostic ratios and similarity of dominant PAH compounds in study area with dominant PAH compounds of Azerbaijan oil field, main probable source of PAH compounds in Gillan province coasts is Azerbaijan oil pollution.
M Zamani, N Khorasani, A.r Riahi Bakhtiari, K Rezaei,
Volume 7, Issue 4 (1-2015)
Abstract
Background and Objectives: This study was performed to determine and identify the origin, concentration and source of perylene entry and some PAH compounds in surface sediments of Ghalam Goodeh (A), Siyah Kashim (B), and Talab Markazi (C) in Anzali wetland. Materials and methods: We collected 22 samples of sediments (from each region) and 2 samples of soils (from A region) in April of 2012. Sampling was performed from soil for proving the condition of concentration and origin of perylene in under investigating sediments. GC-MS was applied for extraction of PAH compounds using organic solvents and 2-phase column chromatography. Diagnostic ratios of Ph/An, Flu/Pyr, Flu/Flu+Pyr, BaA/BaA+Chr and IP/IP+BghiP were used to determine the origin of PAH compounds. Results: In all sediment samples, the origin of perylene and PAH compounds were found to be natural and petrogenic, respectively. The total concentration of PAH compounds were ranged between 560.05 to 1051.93 ng/g dry weight and perylene concentration were obtained between 70.65 to 204.41 ng/g dry weight. Total concentration of PAHs and perylene was significantly more in area A compared with other two area, whereas no relationship was found between normalized values of PAHs and TOC in sediments of all areas. Conclusion: With respect to the petrogenic source of PAHs in the surface sediments, the main sources of the PAH compounds entry are the discharge of domestic and industrials wastewater, the port and shipping activities, the exploration, excavation and refining activities of crude oil in offshore region and transportation of fishing and tourism boat but diagnosis of natural origin of perylene in the samples of surface sediment and soil implicated that this compound can be produced in terrestrial section due to activity of termites and fungi on the woody and cellulosic materials of forest floor, decaying wood and their fossilized remains and then their discharge to the wetland.
E Solgi, A Esmaili-Sari, A.r Riyahi Bakhtiari, M Hadipour,
Volume 8, Issue 1 (8-2015)
Abstract
Background and Objectives: Arsenic contamination is of great environmental concern due to its toxic effects as a carcinogen. In order to assess soil arsenic contamination and its distribution patterns, surface soil samples collected from the urban areas of Arak were analyzed. Materials and Methods: Totally, 62 surface soil samples were collected from depth of 0–20 cm of different locations including parks, green spaces, agricultural, roadsides, and squares of Arak City. The spatial distribution of arsenic in soil was mapped using GIS and kriging method. Results: The concentration of arsenic in the surface soil of Arak City was between 2.2- 10.8 mg/kg (average: 5.78 mg/kg). Spatial analysis showed that arsenic contamination enhances in the city center and there was an increasing trend from south to north. In addition, the mean arsenic concentration in the urban topsoil samples from Arak was lower compared with mean concentration for other cities around the world. Conclusion: It seems that arsenic in soil is controlled by natural and anthropogenic factors. The highest concentrations of arsenic in center and the north areas reflected arsenic loading is originated from anthropogenic sources such as vehicles and industrial processes.
S.r Olyaei, A.r Riahi Bakhtiari, I Sharifpour,
Volume 8, Issue 2 (8-2015)
Abstract
Background and Objectives: Over the past few decades, the entry of pollutants, especially PAHs compounds in natural ecosystems such as lakes and open water for aquatic organisms has created potential environmental hazards. This study aimed to investigate the extent and pattern of bioaccumulation of pyrene oil pollution in muscle, gill, and liver of common carp (Cyprinus carpio) cultured in vitro. Materials and Methods: thirty fishes with mean weight of 140±10g were exposed to 10, 50, and 100 µg/l pyrene. At the end of the 35 days trial period, fish were sampled in order to study the pyrene accumulation in different tissues. Preparing process of samples include soaping, extracting, and two-phase chromatography and finally injecting samples to the gas chromatography-mass spectrometry. Results: Comparison between bioaccumulation of pyrene in muscle, gill, and liver tissues of cyprinus carpio in 10, 50, and 100 µg/l doses showed significant differences. Maximum average accumulation was in liver (dose100) with 685.67 ± 78.5 and the minimum was in muscle in dose 10 with 0.52 ±. 0.13 pyrene’s accumulation trend was the same in all studied doses: liver>gill>muscle. Conclusion: In the present study, pyrene accumulated in fatty tissue, especially liver-acceptor of all of the oil pollutants- was far more than of gills and muscle.
F Rezaei, G Moussavi, A.r Riyahi Bakhtiari, Y Yamini,
Volume 8, Issue 4 (3-2016)
Abstract
Background and Objectives: Adsorption is one of the most common methods for VOCs elimination from waste air stream. The study on the application of a selective and cheap adsorbent with high efficiency in VOCs removal is important from economic aspects. In this study, the potential of MnO/GAC and MgO/GAC composites was investigated for toluene adsorption from air stream at lab scale.
Material and methods: The MnO/GAC and MgO/GAC adsorbents were prepared through Sol-gel method and then were characterized using BET, XRF, and SEM analysis. The effect of operational parameters including; retention time (0.5, 1, 1.5, 2, and 4 S), inlet toluene concentration (100, 200, 300, and 400 ppmv) and the temperature of the air stream (25, 50, 75, and 100 ˚C) were examined on the efficiency of both adsorbents. The efficiency of MnO/GAC and MgO/GAC were determined from the breakthrough time and adsorption capacity and the results were compared statistically.
Results: The breakthrough time of MnO/GAC and MgO/GAC adsorbents increased 90% by increasing retention time from 0.5 to 4 S. Adsorption capacity of MgO/GAC and MnO/GAC was increased 39and 61.1% by increasing inlet toluene concentration from 100 to 400 ppmv, respectively. Breakthrough time of MgO/GAC and MnO/GAC decreased 65 and 59% by increasing inlet toluene concentration from 100 to 400 ppmv, respectively. The efficiency of MgO/GAC and MnO/GAC adsorbents had a direct relationship with the increase of air temperature from 25 to 100 ˚C. Accordingly, the efficiency of MgO/GAC and MnO/GAC was increased 78 and 32% by increasing air temperature, respectively.
Conclusion: The results of the study showed that MgO/GAC and MnO/GAC adsorbents had high efficiency in toluene removal from air stream. The difference between the efficiency of MgO/GAC and MnO/GAC adsorbents was significant and MgO/GAC adsorbent showed higher efficiency than MnO/GAC for toluene adsorption from waste air.
Sanaz Ghaffari, Alireza Riyahi Bakhtiari, Seyed Mahmoud Ghasempouri, Ali Nasrolahi,
Volume 16, Issue 3 (12-2023)
Abstract
Background and Objective: Today, cigarette butts have become one of the most significant forms of waste. This study aims to assess the level of cigarette butts pollution along the Guilan coasts and explore the factors influencing their distribution. Additionally, this study discusses experiences and management options related to this issue.
Materials and Methods: In this study, we implemented a standard sampling method adapted from the "NOAA Marine Debris Program" to collect samples from eight beaches. Each station yielded 18 square quadrant measuring 1 × 1 m2. We estimated the severity of cigarette butt pollution along the Iranian coastline and conducted a review of published articles on the harmful effects of cigarette butts.
Results: The density of cigarette butts ranged from 0.22 to 2.11 items/m2. Bojagh National Park showed the lowest contamination of cigarette butts, while Bandar Anzali exhibited the highest. The results indicate an increase in cigarette butt pollution on beaches in densely populated cities compared to less developed coastal areas. Moreover, stations corresponding to tourist beaches and coasts with gentle slopes have a higher potential for cigarette butt accumulation. The level of cigarette butts pollution along the coasts of Bandar Anzali may be attributed to the extensive tourism activities on these beaches.
Conclusion: Given the high level of cigarette butt pollution on crowded coasts, it is imperative to identify beaches with a higher potential for waste accumulation and implement plans for coastal waste cleanup. Furthermore, effective management programs should be developed to promote cultural awareness and reduce cigarette butt contamination.