Edris Bazrafshan, Ferdos Kord Mostafapour, Mahdi Farzadkia, Kamaledin Ownagh, Hossein Jaafari Mansurian,
Volume 5, Issue 3 (21 2012)
Abstract
Background and Objectives: Slaughterhouse wastewater contains various and high amounts of organic
matter (e.g., proteins, blood, fat, and lard). In order to produce an effluent
suitable for stream discharge, chemical coagulation and electrocoagulation
techniques have been particularly explored at the laboratory pilot scale for
organic compounds removal from slaughterhouse effluent. The purpose of this
work was to investigate the feasibility of treating cattle-slaughterhouse
wastewater by combined chemical coagulation and electrocoagulation process to
achieve the required standards.
Materials and Methods:
At present study, slaughterhouse wastewater after initial analysis was tested
for survey of coagulation process using Poly aluminum chloride (PAC) at various
doses (25-100 mg/L). Then we measured the concentrations of wastewater
pollutants (BOD5, COD, TKN, TSS and fecal Coliforms). Later, we transferred the
effluent to the electrocoagulation unit and we evaluated the removal efficiency
of pollutants in the range 10 to 40 volts of electric potential during 60 min.
Results: It was found
that the efficiency of chemical coagulation process using poly-aluminum
chloride (PAC) as coagulant increases with increasing doses (from 25 to 100
mg/L) we achieved maximum removal efficiency during the chemical coagulation
for parameters of BOD5, COD, TSS, and TKN at 100 mg/L of PAC equivalent to
44.78%, 58.52%, 59.9%, and 39.58% respectively. Moreover, the results showed
that with increasing the electric potential and reaction time, the yield
increases linearly so that maximum removal efficiency at a dose of 100 mg/L
PAC, an electrical potential of 40 volts and a reaction time of 60 minutes for
the parameters BOD5, COD, TSS, and TKN was 99.18% 99.25%, 82.55%,
and 93.97% respectively.
Conclusion: The
experiments demonstrated the effectiveness of combined chemical coagulation and
electrocoagulation processes for pollutants removal from the slaughterhouse
wastewaters. Consequently, this combined process can produce effluent
compliance with the effluent discharge standards.
