Iranian Journal of

Backgrounds and Objectives: As industries are developed, human uses of the energy in the huge scale and release the loss  energy in the form of electromagnetic radiation such as infrared into the environment, that it could affect on the man health. According to the available standards, if the IR-A could be controlled and consequently health of workers could be provided, it would reduce the total industrial expenses.
Materials and Methods: To control this radiation, it is necessary to measure it and compare the results with the available standards. Hence, in this study, we try to  measure this radiation in a unit of industy. For this porpuse the unit of steel company that settled in southeast of ahvaz is selected.
Results: The determinations were done every month during one year in all selected units. These results are compared with the available standards, and finally the differences are statistically evaluated by some suitable statistical methods. For measuring the dispersal of ray in the diffrent height. bat hard data compared with ACGIH standard and SPSS software is used for changing Radiation.
Conclusion:  The  average amount of IR-A  at  this  industrial  unit  is  1.18 mW/cm2  which  is more than the standard value in such industries ,and based on our fouding the natural solar source of this radiation increases such effects in out-door work places.

Backgrounds and Objectives:Propylene glycol is applied in many industries as raw material and can be released to the environment through wastewater of such industries. The biological treatment of solutions containing high concentration of propylene glycol is difficult and some problems can be observed during this process. The main objective of this study was the investigation of electrochemical degradation of propylene glycol and the parameters influencing on improving removal efficiency.
Materials and Methods: In this study the degradation of propylene glycol was made by passing an electrical current though the synthetic wastewater containing propylene glycol. In order to investigate this process several types of electrode with applied voltage ranging between 5 to 50 V was used. Due to the effect of NaCl concentration on removal efficiency which was mentioned in the literature, the experiment was performed for different NaCl concentrations.
Results: In optimum condition, the maximum removal efficiency of propylene glycol (based onCOD) was obtained equal to 90%. The results showed that rising applied voltage, NaCl concentrationand retention time increase the removal efficiency. The optimum retention time was obtained equalto 50 min. The maximum removal was obtained when aluminum electrode was used. It can beattributed to the production of coagulant material such as Al+3 during this process.
Conclusion: The results revealed that this process can be useful for treating the industrial wastewatercontaining propylene glycol.