Search published articles


Showing 5 results for Momeni
Investigation of Existing Status of Hazardous Wastes Management in Central Campus of Tehran University Medical Sciences, Iran
K Naddafi, R Nabizadeh, M.s Hassanvand, A.r Mesdaghinia, K Yaghmaeian, F Momeniha,
Volume 2, Issue 3 (25 2009)
Abstract

Backgrounds and Objectives: Due to having features such as toxicity, corrosiveness, ignitability, reactivity or other similar characteristics, hazardous wastes refer to the wastes that jeopardize man's health and environment. A study was required to identify the hazardous wastes in Tehran University of Medical Sciences (TUMS), since it plays an important role in the development of the country's education. The objective of this research was to provide a review of hazardous wastes production and its management at Tehran University of Medical Sciences.
Materials and Methods: In this study, four schools that were in the central campus of Tehran University of Medical Sciences, Iran, were selected and the necessary data were gathered using a sampling, questionnaire, interviewing those in charge of the units, and referring to the available documents. The information includes the type and amount of waste, method of temporary storage, frequency of waste discharge, and method of final disposal of wastes.
Results: The obtained results indicate that approximately 2072 Kg of hazardous wastes are produced each year, excluding the uncontrolled wastewater. Moreover, schools of dental, pharmacy, medicine, and public health produced approximately 993, 606, 256, 217 Kg/year, respectively, of hazardous wastes in the central campus. Also, the results show that, of total amount of annual hazardous waste that was 2.72 tons, 954, 848, 475, 427, 245, 49 Kg were wastes that the features infectious, toxicity, ignitability, carcinogenesis, corrosiveness, and reactivity, respectively.
Conclusion: It  is to be mentioned that hazardous solid wastes were manage with household solid waste and hazardous liquid waste were discharged into sink without any kind of control. Improper practice is evident from the point of waste production to final disposal.


Identification the Emission Sources of Dioxins  and Furans and Estimating their Contribution on Emission Rate  in Iran in 2010
Fatemeh Momeniha, Ramin Nabizadeh Nodehi, Mohammad Sadegh Hassanvand, Amir Hossein Mahvi, Kazem Naddafi,
Volume 5, Issue 2 (13 2012)
Abstract

MicrosoftInternetExplorer4 Background and Objective: Dioxins and Furans are dangerous and highly toxic compounds entering to the environment from natural and manmade sources. Having high stability and half-life, these compounds remain for a long period in the medium and bring about severe effects on human beings and the environment. The aim of this study was to identify dioxins and furans emission sources in Iran and to estimate their contribution in emission rate.
‌Materials and Methods: First, we identified the emission sources of dioxins and furans and then necessary data was gathered by referring to the authorized organizations and filling the prepared UNEP questionnaires. We used Excel software to analyze the data collected.
Results: According to the results obtained, total dioxins and furan emission in Iran in 2010, was 1957 g TEQ/yr out of this amount, 705.8 g TEQ is emitted to the atmosphere and 643.2 g TEQ is residual ash. Therefore, dioxins and furans emission rate was 26.4 µg TEQ/capita in Iran. The most rates of emissions were associated with uncontrolled open burning (732.8 g TEQ/yr) and ferrous and nonferrous metal production (635.7 g TEQ/yr) such as cupper, iron, and steel.
‌Conclusion: Our findings showed that the emission rate of Dioxins and Furans is much higher in Iran compared with other countries and appropriate management strategies are required to control these dangerous pollutants.

!mso]>ject classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id="ieooui">


Selection of the best management method for construction and demolition waste disposal in Tehran with the view of sustainable development based on Analytical Hierarchy Process (AHP)
V Past, K Yaghmaeian, R Nabizadeh Nodehi , Mh Dehghani, M Momeni, M Naderi,
Volume 10, Issue 2 (9-2017)
Abstract
Background and Objective: Environmental pollution due to dumping construction and demolition wastes has adverse effects on public health. This study aimed to select the best method for managing construction and demolition wastes disposal in Tehran by AHP.
Materials and Methods: This research was a descriptive study. The study population consisted of environmental health experts in the field of construction waste management. Initially, criteria and alternatives for construction waste management, recycling and reuse and landfilling were identified and classified. Using Analytical Hierarchy Process (AHP), different outcomes were compared based on scoring by Expert Choice 11 software.  
Results: The results of this study showed that the discharge percentage in the permanent landfills was 68%, in temporary pits was 9% and in recovery centers was 23% in the last 6 years. The final priority of criteria with respect to the economical criterion was reuse (0.492), recycling (0.274) and landfilling (0.235), respectively. Also, according to the environmental criterion, the scores for reuse, recycling and landfilling were 0.492, 0.373 and 0.198 respectively. Based on social criterion the calculated scores were 0.5, 0.279 and 0.222 for landfilling, recycling and reuse, respectively.
Conclusion: In this study, the reuse option with the weight of 0.439 was the best disposal option; and the recycling option with the weight of 0.312 was the second priority. Landfilling showed the lowest score with the weight of 0.250.
 
Investigating the efficiency of disinfecting and encapsulating device for medical sharps waste
Fatemeh Momeniha, Mohammad Kouhkan, Hoda Safamanesh, Parviz Yarahmadzahi, Mohammad Osman Khodayari, Ali Mohammadi, Amir Hossein Mahvi,
Volume 16, Issue 2 (9-2023)
Abstract
Background and Objective: Due to the importance of managing medical sharps waste and the potential harm caused by these types of waste, the use of safe technologies that simultaneously encapsulate and reduce their volume is considered one of the essential needs for managing medical waste in hospitals and other healthcare facilities. The main objective of this study was to investigate the efficiency of disinfecting and encapsulating device for medical sharps waste.
Materials and Methods: This device provides the process of containment and encapsulation of medical sharps waste by creating a stable protective foam without oxidation through inductive heat in a closed environment, preventing the dispersion and release of these wastes. Gas samples from the device's output were collected using the NIOSH 1501 method and analyzed using GC-MS. The performance efficiency of the device was evaluated based on the biological monitoring of the indicator bacterium Bacillus stearothermophilus.
Results: The results showed that the average concentration of BTEX gases (benzene, toluene, ethylbenzene, and xylenes) and other volatile organic compounds in the device's output was within the permissible limit. The concentrations of Benzene, Toluene, Ethylbenzene and Xylene gases were 0.04, 0.033, 0.029, and 0.029 ppm, respectively. The results of biological monitoring showed that the reduction of the microbial load was 9999.99 (Log 6) and the decontamination process was acceptable.
Additionally, this device has the advantage of reducing the volume of sharp and plastic objects during the encapsulation process, which can be further used in plastic pyrolysis/recycling industries.
Conclusion: It is hoped that by using this innovative and domestic device in the decontamination units of hospitals across the country, we can take an effective step towards improving medical waste management, reducing waste production, reducing hospital costs, and preserving and enhancing the country's health.
 

Investigating methods of estimating and measuring methane emissions in municipal solid waste landfills: a systematic review
Mohammad Hssanabadi, Mohammad Sadegh Hassanvand, Mohammad Khanizadeh, Sasan Faridi, Adel Mokammel, Bita Malekian Esfahani, Ali Ahmadi Orkomi, Fatemeh Momeniha,
Volume 17, Issue 3 (12-2024)
Abstract
Background and Objective: The initial step in managing methane emissions is quantification. This study aims to comprehensively investigate the methods for estimating and measuring methane gas emissions in municipal solid waste landfills.
Materials and Methods: This systematic review includes studies published in English and Farsi between January 2005 and May 2023. English-language articles were included from  PubMed, Web of Science, and Scopus databases, while Persian-language articles were included from SID, Majiran and Google Scholar.
Results: After evaluating the studies, 90 studies providing information on methods for measuring and estimating methane gas emissions in urban landfills were selected. The results showed that emission estimates based on widely used models like LandGEM and IPCC, despite being lower in cost and providing faster results, are often associated with relatively high uncertainty. Therefore, quantitative and qualitative methods of direct measurement are preferred for accurately determining methane emissions from landfills. The most commonly used methods for measuring greenhouse gases, especially methane from landfills, include direct reading equipment and closed flux determination chambers.
Conclusion: Estimating greenhouse gas emissions from primary sources allows responsible authorities to understand the current status of methane emissions and to formulate reduction strategies. The findings of estimated methane emissions from landfills can differ significantly from the actual measurements in some situations. Therefore, while these estimation methods are  useful, fast and cost-effective tools, their inherent uncertainties should be considered when using them.
 

Page 1 from 1     

© 2024 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb