Search published articles


Showing 3 results for Shokoohi

M Hadi, R Shokoohi, A.m Ebrahimzadeh Namvar, M Karimi, M Solaimany Aminabad,
Volume 4, Issue 1 (24 2011)
Abstract

Background and Objectives: widely use of antibiotics as therapy and uncontrolled discharge of them to receiving waters increased the percentages of antibiotic resistant bacteria in various environments which may cause problems in therapy. The aim of this study was to investigate the antibiotic resistance of E. coli, K. pneumoniae and P. aeruginosa bacteria isolated from urban and hospital wastewaters. Nine antibiotics namely Chloramphenicol, Ciprofloxacin, Trimethoprim Sulfamethoxazol, Gentamycin, Ceftizoxime, Nalidixic Acid, Ceftazidime, Ceftriaxon and Cefalexin were investigated in this study.
Materials and Methods: through a cross-sectional descriptive study the isolation of bacteria from hospital and urban wastewater samples was performed by microbiological identification techniques. The resistance to nine antibiotics was tested by application of the standard disc diffusion technique and zone-size interpretation chart of Kirby-Baeur. Non-parametric Mann-Whitney test was used to assessing two environments differences.
Results: The resistance percentage of E. coli to studied antibiotics was significantly less (ranged from 1.81 to 51.02%) than the resistance percentage of P. aeroginosa (ranged from 3.57 to 61.76) and K. pneumoniae (ranged from 6.45 to 91.83%). the highest resistance to antibiotics studied was for K. pneumonia in comparison with others. E. coli, K. pneumonia and P. aeroginosa bacteria showed the highest resistance to CAZ, SXT and CN, respectively. The study showed the resistance rate in hospital wastewater is more than urban wastewater.
Conclusion: Easy access and uncontrolled usage of antibiotics cause discharge of antibiotics to wastewaters and consequently diminish the drugs' effectiveness. High concentration of antibiotic and diversity in wastewater of hospital in comparison with urban wastewater causes to transfer resistant agents between bacteria and increased the multiple resistances.


Reza Shokoohi, Salah Azizi, Said Amir Ghiasian, Javad Fredmal,
Volume 7, Issue 2 (10-2014)
Abstract

Background and Objectives: Pentachlorophenol (PCP) is an organic compound and phenolic derivatives categorized as priority pollutants that have harmful effects on humans, animals, and plants in low concentrations. Therefore, PCP removal from water and wastewater is very important. The aim of this study was to assess the efficiency of A. niger fungus biomass in PCP absorption. Materials and Methods: This was an experimental study in which different steps of the experiments were performed. A. niger strain was prepared from Persian Type Culture Collection of Iranian Research Organization for Science and Technology (IROST). After activation in potato dextrose agar (PDA) culture plates, fungi were incubated for 7 to 10 days at 25 °C. The prepared A. niger biomass was modified by NaOH and then it was used for PCP absorption assay. The concentration of PCP was measured using high-performance liquid chromatography. Results: The findings of present study showed that contact time is an important and effective factor in the PCP absorption rate. Two hours was selected as the optimum retention time in this experiment and after that the removal percentage did not raise significantly. The results of PCP absorption in different pH demonstrated that the adsorption efficiency decreases by rising pH and initial PCP concentration. The effects of contact time, pH and initial PCP concentration on the absorption process was significant (P-value <0.001). Conclusion: The results show that absorption efficiency increases by rising retention time under constant conditions. In addition, at low pH the modified A. niger biomass could be a good absorber for PCP.


Abdolmotaleb Seid Mohammadi, Ghorban Asgari, Reza Shokoohi, Parastoo Shahbazi,
Volume 13, Issue 3 (11-2020)
Abstract

Background and Objective: Considering the importance of alkalinity in pH regulation and its buffering role, in this study, the effect of inlet wastewater alkalinity on the efficiency of the anaerobic unit of the wastewater treatment plant. Moreover, a superior chemical compound in providing alkalinity to wastewater was investigated.
Materials and Methods: This study was performed in the treatment plant to determine the relationship between input alkalinity and removal efficiencies of COD, BOD5 and TSS. In order to determine the optimal alkali material for superb anaerobic wastewater performance, four common chemical substances including, NaOH, Na2CO3, Ca(OH)2 and MgO were selected and examined using One Factor At Time (OFAT) test method.
Results: According to the results maximum removal efficiencies were obtained 62, 66.6 and 71.2% for COD, BOD5 and TSS, respectively under alkaline condition of 1260 mg/L CaCO3. Furthemore, the optimal dose to supply one unit of alkalinity by Na2CO3, Ca(OH)2 and MgO were 0.53, 0.54 and 0.3 mg/L, respectively. These values were obtained 5 min contact time and mixing rate of 150 rpm. However, for NaOH the optimal dose supply was obtained 0.35 mg/L for 3 min contact time and mixing rate of 100 rpm.
Conclusion: In conclusion, the performance of anaerobic baffled reactor is highly related to the supply of influent alkalinity to the reactor. In addition, the use of MgO can be considered as a suitable alkaline substance to neutralize acidic wastewater and provide alkalinity for ABR system.


Page 1 from 1     

© 2024 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb