Showing 27 results for Isotherm
Hafez Golstanifar, Simin Nasseri, Amir Hossin Mahvi, Mohamad Hadi Dehghani, Anvar Asadi ,
Volume 5, Issue 4 (2-2013)
Abstract
Background and Objectives: The contamination of nitrate (NO3−) in groundwater resources causes two adverse health effects: induction of “blue-baby syndrome” (methemoglobinemia), especially in infants, and the potential formation of carcinogenic nitrosamines. The aim of this research is to investigate nitrate removal from groundwater using alumina nanoparticles and to determine the adsorption isotherms.
Materials and Methods: This analytical-descriptive study was carried out at lab-scale, under batch conditions, and at room-temperature. The structure of alumina nanoparticles was determined using XRD, SEM, and TEM techniques. The concentration of nitrate in the solutions was determined by spectrophotometer at wavelengths of 220 and 275 nm. In addition, we investigated the impact of the important operational parameters including initial dose of Al2O3 (0.06-0.25 g/l), initial concentration of the solution (50- 300 mg/l), contact time (5-60 min), and pH (3-9). Moreover, we used Freundlich and Langmuir isotherm models to calculate equilibrium constant.
Results: It was found that nitrate removal efficiency increased as we increased contact time, initial concentration and pH in batch system. A maximum of 60% nitrate removal was achieved under following conditions: 60 min contact time, pH 5, and initial nitrate concentration of 300 mg/l as N. The obtained results showed that the adsorption of nitrate by Nano-Gamma-Alumina follows Langmuir isotherm equation with a correlation coefficient equal to 0.982.
Conclusion: Overall, our findings showed that the alumina nanoparticles can be used as an effective adsorbent to remove NO3 from aqueous solutions.
Ali Reza Rahmani, Ghorban Asgari, Mehrdad Farrokhi, Mahdi Shirzad Siboni,
Volume 5, Issue 4 (2-2013)
Abstract
Background and Objectives: Dyes are one of the main environmental pollutants in the industrial effluents including textile industries, which are harmful for human health and environment. The purpose of this research was to investigate removal efficiency of Reactive Black 5 (RB5) dye using adsorption onto strongly basic anion exchange resin as an appropriate adsorbent.
Materials and Methods: After preparing materials and equipment required, removal efficiency of Reactive Black 5 (RB5) dye using adsorption onto strongly basic anion exchange resin was investigated with respect to the variation of pH, contact time, adsorbent dosage, and initial RB5 dye concentration in batch system. Then results were analyzed using Excel software.
Results: Our results showed that removal efficiency was decreased by increasing pH and initial RB5 dye concentration. Moreover, we found that the removal efficiency was increased by increasing adsorbent dosage and contact time. The kinetics and equilibriums data were explained acceptably by Langmuir isotherms and pseudo-second-order kinetics models respectively.
Conclusion: Overall, our findings revealed that removal of RB5 dye from aqueous solution using adsorption onto strongly basic anion exchange resin can be considered as an effective and quick method.
Amir Sheikh Mohammadi, Mahdieh Sardar,
Volume 5, Issue 4 (2-2013)
Abstract
MicrosoftInternetExplorer4
Background
and Objectives: Antibiotics are
potential pollutants that represent an important environmental problem because
of their toxic effects on the food chain and aqueous streams. The objective of
this research was to study the adsorption of penicillin G on to chestnut shell
as an inexpensive adsorbent.
Materials and Methods: This study was performed at laboratory scale
and batch system. We studied the influence of process variables such as
adsorbent dose, initial PEN G concentration, pH of solution, contact time, and
breakthrough curves. In order to find out the possibility of reuse, desorption
study was also carried out. The surface characteristics of adsorbent were
investigated using Fourier Transform Infra-Red and Scanning electron
microscope. Equilibrium study data were modeled using Langmuir, Freundlich, and
D-R models. Moreover, kinetic studies
were done by three models of pseudo first order, pseudo second order, and
intra-particle diffusion.
Resuls: The maximum
PEN G removal achieved was 92%, at pH 3, adsorbent dose 0.1 g/l and contact
time 120 min. The Langmuir equation (R
2=0.99) provided the best fit
for the experimental data. It was also found that adsorption of PEN G by
chestnut shell followed pseudo- second order model (R
2= 0.992).
Conclusion: According to the results obtained, chestnut
shell appears to be a suitable, low cost and efficient adsorbent for removing
PEN G from waste streams.
Elnaz Iravani, Mohammadhadi Dehghani, Amirhossein Mahvi, Noushin Rastkari,
Volume 6, Issue 2 (9-2013)
Abstract
Background and objectives: Bisphenol A (BPA) is an endocrine disrupting chemical that releases to the environment through effluents of its producing factory, pulp and paper mill factories, and plastics industry. The purpose of this study was to investigate adsorption isotherms of removing BPA from aqueous solutions using single walled carbon nanotubes (SWCNTs).
Materials and methods: This study was an empirical investigation. Our experiments were conducted discontinuously using 50 mL of sample in each test. The variables of this study were the contact time (5, 15, 30, 60, 90, 120 min), the initial concentration of BPA (2, 5 , 20, 50 mg/L), and pH (3, 5, 6, 9, 11). The concentrations of BPA were measured using UV-Vis spectrophotometer.
Results: The maximum adsorption capacity was found to be 71.42 mg/g. The results of our experiments showed that maximum adsorption capacity at equilibrium was achieved at t = 60 min and pH = 9. Moreover, increasing the initial concentration is associated with an increase in adsorption capacity until it becomes constant.
Conclusion: The BPA adsorption on SWCNT follows Freundlich-Langmuir isotherm.
Mehdi Bahrami, Saeeid Brumand-Nasab, Heydar-Ali Kashkooli, Ahmad Farrokhian Firouzi, Ali-Akbar Babaei,
Volume 6, Issue 2 (9-2013)
Abstract
Background and Objectives: Among the heavy metals cadmium is of considerable environmental and health significance because of its increasing mobilization and human toxicity. The objectives of this research were to synthesize SDS modified magnetite nanoparticles (Fe3O4) and to determine its efficiency in cadmium removal from aqueous solutions.
Materials and Methods: Modified magnetite nanoparticles were synthesized and the effects of pH and contact time on cadmium removal efficiency were investigated in batch system. Then kinetics and isotherm models coefficients were determined in the optimum pH and equilibrium time conditions. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infra red (FTIR) were used to characterize the modified magnetite nanoparticles synthesized.
Results: The SEM results showed that the diameter of the particles is 40-60 nm. It was found that the optimum pH value for maximum adsorption of 10 mg/L cadmium by 0.1 g adsorbent in 12 hr was 6. Kinetic study showed that the equilibrium time was 30 min. The adsorption kinetics fitted well using the Ho pseudo second-order kinetic model however, the adsorption isotherm could be described by the Freundlich model. The maximum adsorption capacity of modified magnetite nanoparticles for Cd2+ was found to be 9.604 mg/g.
Conclusion: The results of this study indicated that the modified magnetite nanoparticles can be employed as an efficient adsorbent for the removal of cadmium from contaminated water sources
Mohammad Ali Baghapour, Babak Jahed, Gholam Hossein Joshani,
Volume 6, Issue 3 (12-2013)
Abstract
Background and Objectives: Increasing waste tiers production has made the recycling of this solid waste a critical issue in the world. On the other hand, it seems contamination of groundwater to the petroleum pollutant like gasoline is a great threat to the health of societies in developing countries. The main objective of this study was gasoline removal from aquatic environment by waste tire derived activated carbon.
Materials and Methods: In this study for preparation of activated carbon from waste tires, KOH was used for chemical activation process. We used argon gas to prevent precursor oxidation . We applied N2 gas and BET isotherm for characterization of the prepared activated carbon texture. Isothermal and kinetic models were used for defining gasoline adsorption characteristic to adsorbent, and thermodynamic studies were used to determine the effect of temperature.
Results: Characterization results revealed that SBET and VTOTAL were 111.702m2/g and 0.124cc/g respectively. Langmuir and pseudo-second order models were the best isotherm and kinetic models for prediction of the adsorbent behaviors to adsorb gasoline. The Gibbs free energy changes were negative at all temperatures applied.
Conclusion: Produced activated carbon has desired surface area and adsorptive capacity for gasoline adsorption in aquatic environments and it seems preparation activated carbon from waste tiers is cheap, effective and environment friendly.
Mohammad Malakootian, Laleh Ranandeh Kalankesh,
Volume 6, Issue 4 (3-2014)
Abstract
Background and Objective: Humic substances in drinking water react with chlorine and form carcinogenic compounds. Humic acid is a principal component of humic substances and its separation from surface waters is crucial. Adsorption process is among different methods for separation of humic acid from surface waters and because of its simple and economical nature it has attracted considerable attention. The aim of this research was to examine performance of silicon nanoparticles in adsorption of humic acid in water. Materials and Methods: Experimental study was conducted on both synthetic and real water samples collected from Zarrineh Rood River, Tabriz before its entrance to water treatment process. We used instantaneous sampling method.The chemical quality of crude sample and its humic acid was determined and then the influence of pH, absorbent amount, and time on the removal of humic acid was evaluated. Therefore, the optimal conditions for each of these parameters were determined. In order to get better insight into the process of adsorption, the adsorption kinetic and equilibrium isotherm were studied. We measured humic acid concentration and TOC using spectrophotometer (Shimadzu /UV-1800, Japan) at a wavelength of 254 nm and TOC analyzer (Shimadzu model TOC-VCSH) measured. SPSS software and regression were used for data analysis. Results: At pH=4, retention time of 10 minutes, adsorbent amount of 0.25 g/L, we found that the highest percentage of humic acid adsorption was 88.4 and 81.8 for synthetic and real solutions respectively. The finding revealed that the removal of humic acid follows Freundlich isotherm ( =0.8172) and the second order kinetic model ( =0.9936). Conclusion: Removal in both real and synthetic solutions was less due to the reaction of influencing factors. However, considering the high percentage of humic acid removal under optimal conditions and its comparison with other methods, the removal of humic acid using SiO2 can be considered as an efficient method.
Mohamad Hadi Dehghani , Mamood Alimohammadi , Amir Hossein Mahvi, Noushin Rastkari, Masoome Mostofi, Maryam Gholami ,
Volume 6, Issue 4 (3-2014)
Abstract
Background and Objective: Various industries such as petrochemical, oil refinery, pharmaceutical, plastics, paper, steel and, resin produce a substantial of phenol and its derivatives. Wastewaters containing phenol need careful treatment before discharging into the environment due to their poor biodegradability and high toxicity. The objective of this study was to remove phenol by multiwall carbon nanotubes from aqueous solution. Materials and Methods: Adsorption process was implemented in a laboratory-scale batch with emphasis on the effect of various parameters such as contact time (5 to 120 minutes), pH (3- 11), initial concentration of phenol (5 - 50 mg/l) and the sulfate and chloride ions (20 - 200 mg/l) on adsorption process. To achieve a better realization of adsorption process, sorption kinetics and equilibrium isotherms were also determined. Results: The results indicated that maximum adsorption capacity occurred at concentration 50 mg/L and t =30 minutes. The uptake fluctuated very little in the pH range of 3–9, and at greater than 9 the absorption decreased suddenly. Moreover, the presence of sulfate and chloride ions had no effect on the process. It was found that adsorption kinetics and equilibrium data follow a pseudo-second-order kinetics model and a Freundlich isotherm model respectively. Conclusion: It is concluded that carbon nanotubes being effective in a wide range of pH, short time to reach equilibrium and the absence of competing ions on the absorption process can be used effectively in removing phenol from aqueous solution.
B Kakavandi, R Rezaei Kalantary, A Jonidi Jafari, A Esrafily, A Gholizadeh, A Azari,
Volume 7, Issue 1 (7-2014)
Abstract
Background and Objective: Extreme use of antibiotics and discharging them to the environment lead to serious consequences. Activated carbon is the most commonly adsorbent for these contaminants but its main drawback is difficulty of its separation. The objective of this study was synthesis of magnetic activated carbon by Fe3O4 and investigating its efficiency in adsorption of amoxicillin from synthetic wastewater. Materials and Methods: Materials and Methods: Physical and structural characteristics of the adsorbent synthesized were analyzed using SEM, TEM, XRD and BET techniques. The effect of factors like pH, initial concentration of amoxicillin and adsorbent, contact time, and temperature were investigated to determine thermodynamic parameters, equilibrium isotherms, and kinetics of adsorption process. Results: Physical characteristics of the magnetized activated carbon showed that Fe3O4 nanoparticles had the average size of 30-80 nm and BET surface area was 571 m2/g. The optimum conditions of adsorption were: pH=5, contact time=90min, adsorbent dose of 1g/L and temperature 200C. The equilibrium isotherms data showed that the adsorption process fitted both Freundlich and Longmuir models with the maximum capacity of 136.98 mg/g. The kinetic of the adsorption process followed pseudo second-order model. The negative values of &DeltaH0 and &DeltaG0 obtained from studying the adsorption thermodynamic suggested that amoxicillin adsorption on magnetic activated carbon was exothermic and spontaneous. Conclusion: The present study showed that the magnetic activated carbon has high potential for adsorption of amoxicillin, in addition to features like simple and rapid separation. Therefore, it can be used for adsorption and separation of such pollutants from aqueous solutions.
H Zarei, A.h Mahvi, S Nasseri, R Nabizadeh Noudehi, F Shemirani,
Volume 8, Issue 3 (12-2015)
Abstract
Objective and Background: Fluoride is an element widely found in the earth crust. Advantages and disadvantages of fluoride in the human body are depended on its concentration. Long-term consumption of drinking water contaminated with arsenic can cause adverse health effects such as skin lesions and cancer in humans. The aim of this study was to study efficiency of nano alumina on multi walled carbon nano tube for removal As(V) and fluoride from aqueous solution.
Materials and Method: In this study, nano-scale crystalline alumina was synthesized on single walled carbon nanotube by sol-gel method for using as a sorbent for solid phase extraction of Fluorine ion and arsenic(V). Response surface methodology based on Box-Behnken was used to assess the effect of independent variables on the response function and prediction of the best response value. In this study, effect of different parameters, such as contact time (10 to 120 min), pH (3-9), adsorbent dosage (0.25-1.5 g/L) and initial concentration of fluoride (2-8 mg/L) on efficiency of process was investigated. The structure of nano-scale alumina on multi walled carbon nano tube was determined by XRD and SEM techniques. Moreover, Freundlich and Langmuir isotherm models were used to calculate equilibrium constant.
Results: It was found that by increasing contact time and adsorbent dosage the rate of fluoride removal increased. However, by increasing pH and initial concentration the efficiency of fluoride removal decreased. High value for R2 (0.94) shows that removal of arsenic(V) can be described by this model. The Freundlich isotherm was the best fitted graph for experimental data with R2 more than 0.997.
Conclusion: In this study, it was observed that efficiency of arsenic(V) and fluoride removal was greatly increased by using nano-scale alumina on multi walled carbon nanotubes (MWCNTs).
A Shahbazi,
Volume 8, Issue 3 (12-2015)
Abstract
Background and Objectives: Rapid growing of Triton X-100 application in industries results in its appearance in effluents and threaten the aqueous ecosystems. Triton X-100 is not biodegradable and can accumulate in food chain.
Materials and Methods: In this study, sorption capacity of six synthesized zeolites with different regular porous structure was studied for triton X-100 (TX-100) surfactant and the results were compared with Clinoptilolite natural zeolite of Damavand region.
Results: Within all zeolite studied, Beta(200) showed the highest sorption capacity (about 575 mg/g), which is due to its regular pore structure with large pore diameter, channel intersections, high SiO2/Al2O3 ratio and high surface area. Langmuir monolayer isotherm and pseudo-second-order kinetic equation could provide well-fitted to the experimental data in simulating adsorption behavior of TX-100 over Beta(200) zeolite.
Conclusion: The adsorption feature was internal sorption and the intraparticle diffusion might be a rate-limiting control for Beta(200) zeolite. Results of experiments demonstrated that the hydrophobic zeolites with large pore diameter such as Beta(200) could be effective sorbents for industrial wastewater treatment features.
F Mohammadi, S Rahimi, Z Yavari,
Volume 8, Issue 4 (3-2016)
Abstract
Background and Objectives: In this work, biosorption of hexavalent chromium from aqueous solution with excess municipal sludge was studied. Moreover, the performance of neural networks to predict the biosorption rate was investigated.
Materials and Methods: The effect of operational parameters including initial metal concentration, initial pH, agitation speed, adsorbent dosage, and agitation time on the biosorption of chromium was assessed in a batch system. A part of the experimental results was modeled using Feed-Forward Back propagation Neural Network (FFBP-ANN). Another part of the test results was simulated to assess the model accuracy. Transfer function in the hidden layers and output layers and the number of neurons in the hidden layers were optimized.
Results: The maximum removal of chromium obtained from batch studies was more than 96% in 90 mg/L initial concentration, pH 2, agitation speed 200 rpm and adsorbent dosage 4 g/L. Maximum biosorption capacity was 41.69 mg/g. Biosorption data of Cr(VI) are described well by Freundlich isotherm model and adsorption kinetic followed pseudo-second order model. Tangent sigmoid function determined was the most appropriate transfer function in the hidden and output layer. The optimal number of neurons in hidden layers was 13. Predictions of model showed excellent correlation (R=0.984) with the target vector. Simulations performed by the developed neural network model showed good agreement with experimental results.
Conclusion: Overall, it can be concluded that excess municipal sludge performs well for the removal of Cr ions from aqueous solution as a biological and low cost biosorbent. FFBP-ANN is an appropriate technique for modeling, estimating, and prediction of biosorption process If the Levenberg-Marquardt training function, tangent sigmoid transfer function in the hidden and output layers and the number of neurons is between 1.6 to 1.8 times the input data, proper predication results could be achieved.
S Sobhanardakani, R Zandipak,
Volume 9, Issue 2 (9-2016)
Abstract
Background and Objective: Dyes are important pollutants that lead to producing serious hazards to human, other animals and organisms. Dyes are not biodegradable by aerobic treatment processes. Therefore, their removal from industrial effluents before discharging into the environment requires extreme and great attention. The aim of this research was to evaluate removal efficacy of methyl orange dye from aqueous solutions using NiFe2O4 nanoparticles.
Materials and Methods: This study was an empirical investigation in which NiFe2O4 nanoparticles were synthesized by co-precipitation method and were used as an adsorbent for the removal of methyl orange from aqueous solution. NiFe2O4 nanoparticles were characterized using X-Ray Diffraction (XRD), Transmission Electronic Microscopy (TEM), pHpzc and SEM-EDX elemental analysis methods. Experiments were conducted discontinuously using 20 mL methyl orange solution of 40 mg/L. The effect of variables such as pH (2-8), amount of adsorbent (0.009-0.07 g) and contact time (2-70 min) on the efficacy of dye removal was studied. Finally, experimental data were compared by Langmuir, Freundlich, and Temkin isotherms and pseudo-first-order and pseudo-second-order kinetic models.
Results: TEM images showed that the NiFe2O4 nanoparticles had spherical shapes with the size of 12 nm. The results indicated that removal efficiency increased up to 0.04 g adsorbent and 20 min contact time. The optimum pH for methyl range removal was 2. Moreover, under these conditions, the adsorption process followed the Langmuir adsorption isotherm with a correlation coefficient of 0.995 and pseudo-second-order kinetic model with a correlation coefficient of 0.999. Also, the maximum adsorption capacity of the prepared adsorbent was 135 (mg/g) for Langmuir isotherm.
Conclusion: The NiFe2O4 nanoparticles are effective and available adsorbents for the removal of methyl orange from industrial wastewater.
M Nourinejad, N Arsalani, H Namazi,
Volume 10, Issue 1 (6-2017)
Abstract
Background and Objective: Nicotine as the most toxic alkaloid in tobacco is one of the compounds which causes human death over the past few decades. The purpose of this paper was to remove nicotine environmental pollution from aqueous solutions using halloysite-polythiophene nanocomposite.
Materials and Methods: Halloysite-polythiophene nanocomposite was prepared using a homogeneous solution of HNT and FeCl3 at 0-5°C by the ball milling technique. In this study, parameters such as pH, contact time and initial concentration of nicotine in laboratory scale were studied and the physical properties of the adsorbent were characterized via fourier transform infrared (FTIR) and scanning electron microscopy (SEM). Then, the absorption results were described using Langmuir and Freundlich isotherms.
Results: The results showed that the pH, initial concentration of nicotine and contact time had a direct effect on the nicotine adsorption process. The adsorption of nicotine followed Langmuir isotherm (R2 < 0/995). Moreover, the best adsorption result was achieved at pH=7, 50mg adsorbent, contact time of 90 min and 50mg/L of nicotine.
Conclusion: The results of this study showed that the Halloysite modification as a mineral composite with polythiophene and the synthesis of HNT@PTh nanocomposite can be used as an effective adsorbent to adsorb the nicotine.
A Seid-Mohammadi, Ar Rahmani, Gh Asgari, S Bajalan, A Shabanloo,
Volume 10, Issue 1 (6-2017)
Abstract
Background and Objective: Main sources of 4-chlorophenol wastewater are petroleum industry, coal, paper and resin production. The aim of this study was to compare the performance of raw and cationic surfactant modified nanoclay in removal of 4-chlorophenol from aqueous solutions.
Materials and Methods: The influence of contact time, initial pH of solution, adsorbent dosage and 4-chlorophenol concentration as effective parameters in adsorption process and the influence of modification solution pH and surfactant loading rates were investigated. The modified nanoclay was characterized by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) spectroscopy. Finally, the isotherm and adsorption kinetics were investigated.
Results: The removal efficiency of 4-chlorophenol was increased by increasing the initial pH from 3 to 11, so that after of 120 min, the absorption efficiency at an initial 4-chlorophenol concentration of 100 mg/L and 0.25 g adsorbate was 26 and 95.5 % at pH 3 and 11, respectively. Under the same conditions the removal efficiency for the raw nanoclay was 2 and 9% at pH 3 and 11, respectively. The FTIR and XRD analyses revealed that the nanoclay structural changed from hydrophilic to hydrophobic and the interlayer spacing was increased. The adsorption of 4-chlorophenol on raw and modified nanoclay was consistent with Langmuir and pseudo-second-order kinetics. The maximum absorption capacity of raw and modified nanoclay was 0.5 and 25.77 mg/g, respectively
Conclusion: The modification of nanoclay with cationic surfactant increased the adsorption efficiency of 4-chlorophenol.
Z Esdaki, R Ansari, F Ostovar,
Volume 12, Issue 3 (12-2019)
Abstract
Background and Objective: Due to the existence of industries such as stainless steel, the presence of nickel (II) ions in water and wastewater has been reported at high concentrations. Removal of nickel (II) ions from wastewater and the environment are of primary importance. In this study, iron (III) oxide nanoparticles were studied as an adsorbent for removal of Ni (II) ions from water in the batch equilibrium system.
Materials and Methods: FT-IR, SEM and XRD techniques were used to characterize the structure of the sample. To determine the optimum adsorption, the effect of important parameters such as pH, contact time, adsorbent weight and initial concentration were investigated. Also, thermodynamic study (Gibbs standard energy variations, enthalpy and entropy), isothermal studies (absorption capacity) and kinetic studies (absorbent effect with time) were investigated.
Results: The results showed that the magnetic adsorbent had the highest removal efficiency of nickel (II) at pH 7, contact time 60 min, adsorbent dosage of 200 mg, and maximum removable concentration of 400 mg/L.
Conclusion: With thermodynamic studies, it was determined that the reaction was endothermic and the spontaneous process was controlled using the entropy factor (ΔG°=-2.7 KJ/mol, ΔS°=+165.17 J/mol.K). In order to better understand the mechanism of adsorption, kinetics studies were carried out using the pseudo-first-order and pseudo-second-order models. Then, Langmuir and Freundlich adsorption isotherms were investigated to determine the adsorption capacity, and it was found that the adsorption data were well fitted to Freundlich model and the maximum adsorption capacity was 43.5 mg/g, which indicated high adsorption capacity and its multi-layers.Then, Langmuir and Freundlich adsorption isotherms were investigated and it was found that the adsorption data were well fitted to Freundlich model and maximum adsorption capacity (qmax=43.5 mg/g) was obtained which indicates good adsorption capacity of adsorbent and its multi-layers.
H Niknejad, M Farzadkia, A Esrafili, M Kermani,
Volume 12, Issue 4 (2-2020)
Abstract
Background and Objective: 2,4 dinitrophenol is observed in sewage produced from chemical and petrochemical industries. Contamination of drinking water with these pollutants causes toxicity, health problems and change in taste and odor. The present study was developed to evaluate the efficiency of removal 2,4-DNP through dried sludge adsorbent and modified calcium chloride sludge adsorbent.
Materials and Methods: At first, sludge was dried at temperature of 60 °C. Next, CaCl2 was used to improve adsorption capacity. The removal efficiency of 2,4 dinitrophenol were determined by HPLC at wavelength of 360 nm. The effects of influencing factors including pH, initial pollutant concentration, contact time, and adsorbent dose were examined.
Results: The optimum pH of adsorption for both adsorbents was found to be 7. The optimum concentration of 2,4-DNP was 10 ppm. The results obtained from the present research showed that the removal of the contaminant using dried and modified sludge sorbent was increased from 72.6% to 86% at a dosage of 1.5 g. The adsorption kinetics were fitted with the pseudo second order kinetics model for both adsorbents. The isotherm data also showed that the adsorption of this pollutant on both adsorbents is fitted with the Freundlich model.
Conclusion: Results obtained from the present study indicated that the efficiency of the modified sludge ash is more than the non-modified sludge in 2,4 dinitrophenol removal. This can reduce adsorbent consumption in industrial treatment plants.
Azadeh Modiri, Shadab Shahsavari, Ali Vaziri Yazdi, Ali Akbar Seifkordi,
Volume 13, Issue 1 (4-2020)
Abstract
Background and Objective: Arsenic has long been considered as a heavy metal and toxic pollutant due to its potential to harm the human health and the environment. Adsorption is one of the mechanisms for arsenic removal from wastewater. Therefore, the purpose of this research was to investigate the feasibility of synthesized chitosan-zirconium magnetic nano fiber on arsenic adsorption from wastewater and to evaluate its kinetic and isotherm models.
Materials and Methods: Synthesis of nanofibers was performed by electrospinning method and the optimal formulation was determined following the experimental design. Then, kinetics and isotherms of arsenic adsorption on the as synthesized nanofibers were investigated. The prepared nanofiber was characterized using X-ray diffraction (XRD), Field Emission Scanning Electron Microscopes (FESEM), Infrared Fourier Transform (FT-IR) and Vibrational Sampler Magnetic Meter (VSM).
Results: The optimal formulation was obtained: 2.84% chitosan, 0.97% nano-zirconium and 0.94% nano-iron. The adsorption of arsenic on synthetic fibers was found to follow quasi-first-order kinetics and the Freundlich isotherm. Furthermore, the effect of initial concentrations of arsenic, contact time, temperature and pH on arsenic adsorption were surveyed. The optimal condition for nitrate arsenic adsorption was obtained at initial concentration of 70 mg/L, 45 min contact time and at pH 3.
Conclusion: According to the results, the synthesized nanofiber displayed a regular network structure with the distribution of the Zr-nanoparticles in its shape. Also, according to the form of magnetometric analysis, it was found that chitosan-nanosirconium magnetic nanofibers are well magnetized and are free magnetic. Finally, it can be concluded that the synthesized nanosorbent has a high potential for arsenic removal from industrial effluents.
Arezoo Balighian, Mitra Ataabadi,
Volume 13, Issue 2 (8-2020)
Abstract
Background and Objective: Hexavalent chromium is reported to be highly toxic, mutagenic and carcinogenic; hence treatment of water and wastewater contaminated with this element by low-cost and environmentally friendly methods is of great importance. Therefore the aim of present study was to evaluate the efficiency of Fe(II) modified bentonite for hexavalent chromium removal from a simulated wastewater.
Materials and Methods: In this study, Fe(II) modified bentonite was synthesized. Structure and morphology of bentonite were investigated by XRD and SEM techniques. Experiments were carried out as central composite design with three input parameters namely initial hexavalent chromium, pH and adsorbent dosage at 5 levels. Finally, the results were assessed by adsorption isotherm models.
Results: The findings revealed that complete removal efficiency of Cr (VI) achieved at pH of 2, initial hexavalent chromium concentration of 20 mg/L and adsorbent dose of 5 g/L. The adsorption isotherm model found to fit well with Langmuir isotherm model and revealed that the monolayer adsorption of hexavalent chromium at adsorbent surface was happened. The equilibrium data better fitted the Langmuir isotherm model suggested a monolayer adsorption nature of the modified bentonite.
Conclusion: The findings in this study showed the promise of use of Fe(II) modified bentonite for Cr (VI) removal. Moreover, response surface methodology can be used as an effective method to optimize hexavalent chromium removal from wastewaters.
Mohammad Ghafoori, Mehrdad Cheraghi, Maryam Kiani Sadr, Bahareh Lorestani, Soheil Sobhanardakani,
Volume 16, Issue 2 (9-2023)
Abstract
Background and Objective: Antibiotics are emerging pollutants that enter the human environment through pharmaceutical, hospital, and urban wastewater. Therefore, this study was conducted to investigate of removal efficacy of tetracycline (TC) from aqueous solutions using GO@Fe3O4@β-CD.
Materials and Methods: In this descriptive study, GO@Fe3O4@β-CD was synthesized and then used as an adsorbent for the removal of TC from aqueous solution. GO@Fe3O4@β-CD was characterized using X-ray diffraction (XRD), Scanning electronic microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and vibrating sample magnetometry (VSM) methods. Also, the influence of variables including pH (3-9), amount of adsorbent (0.003-0.050 g), contact time (0-100 min), and temperature (25-55 °C) so assessed on the efficacy of TC removal.
Results: The results of TGA analysis showed that GO@Fe3O4@β-CD nanoparticles were resistant to temperatures up to 400 °C. Also, the results indicated that β-cyclodextrin was uniformly dispersed on the surface of GO@Fe3O4.
The results indicated that removal efficiency increased up to 60 min contact time, 0.01 g of adsorbent, and decrease temperature to 25 °C. The optimum pH for TC removal was 7.0. Also, under these conditions, the adsorption process followed the Langmuir adsorption isotherm with a correlation coefficient of 0.992 and the pseudo-second-order kinetic model with a correlation coefficient of 0.997, 0.999, and 0.998. The maximum adsorption capacity of the prepared adsorbent was 357 mg/g.
Conclusion: The GO@Fe3O4@β-CD could be an effective and efficient adsorbent for the removal of TC from industrial wastewater.
