Search published articles


Showing 2 results for Cellulose Adsorbent
Synthesis, characterization, and modification of hairy nanocrystalline cellulose adsorbent for using in carbon dioxide adsorption process
Omid Mohammadi Moinalzoafa, Maryam Tahmasebpoor,
Volume 17, Issue 4 (3-2025)
Abstract
Background and Objective: The global increase in energy consumption has led to a rise in carbon dioxide emissions, causing significant and often irreparable damages such as global warming. This study investigates the adsorption capacity of hairy nanocrystalline cellulose as a novel adsorbent and seeks to enhance its performance in carbon dioxide capture by modifying it with two types of amines: monoethanolamine and diethanolamine.
Materials and Methods: Hairy nanocrystalline cellulose was synthesized through oxidation and amine modification. The formation of chemical groups and sample morphology was analyzed using Fourier transform infrared spectroscopy and field emission scanning electron microscopy. Additionally, thermogravimetric analysis was performed at two temperatures (25 and 50 °C) and two concentrations (10% and 90% carbon dioxide in nitrogen) to evaluate the adsorption capacity of the samples.
Results: The results showed that at 25 °C and a carbon dioxide concentration of 90%, the adsorption capacities of hairy nanocrystalline cellulose, cellulose modified with 20% by weight of monoethanolamine, and cellulose modified with 20% by weight of diethanolamine were 1.74, 2.5, and 1.96 mmol/g, respectively. These findings indicate that modifying the adsorbent with monoethanolamine increased its carbon dioxide adsorption capacity by approximately 44%, while modification with diethanolamine resulted in a 13% improvement.
Conclusion: The findings suggest that hairy nanocrystalline cellulose, particularly in its modified forms, holds significant promise as a novel and effective adsorbent for carbon dioxide capture.
 

Equilibrium and kinetic investigation of solophenyl dye removal from aqueous solution using cellulose adsorbents
Hanieh Mirbolooki, Shahriar Mahdavi, Eisa Solgi, Babak Razdar, Mahboubeh Zarabi, Davoud Akhzari,
Volume 17, Issue 4 (3-2025)
Abstract
Background and Objective: Dyes are among the most widespread pollutants found in industrial wastewater. The aim of this study is to investigate the potential of vineyard wood waste as a green adsorbent for the removal of polyazo solophenyl dye from aquatic environments.
Materials and Methods: In this laboratory research, two forms of adsorbents modified with H₂SO₄ and NaOH were used. Data obtained from dye adsorption in synthetic solutions were fitted to isotherm, kinetic, and thermodynamic models, with all calculations performed using Excel software. Zeta potential analysis, along with FTIR, BET, and FESEM-EDS instrumental analyses, was conducted to determine the properties of the adsorbent. Additionally, the desorption rates of the adsorbents were analyzed.
Results: The results showed that the highest color removal efficiency for the adsorbent modified with H2SO4 was achieved at a contact time of 180 minutes and a reaction temperature of 50 °C, while for the adsorbent modified with NaOH, the highest efficiency was observed at a contact time of 105 minutes and a reaction temperature of 25 °C. For both adsorbents, the optimal pH was 4, and the optimal adsorbent dosage was 1 g. The adsorption data for both modified adsorbents followed the pseudo-second-order kinetic model, while the equilibrium data aligned with the Freundlich and Temkin isotherm models. The adsorption capacities were found to be 22.27 mg/g and 9.87 mg/g for the adsorbents modified with acid and base, respectively, under optimal conditions.
Conclusion: This study introduces a novel, low-cost adsorbent derived from natural waste for water pollution removal, transforming the current approach into a cost-effective and eco-friendly solution.
 

Page 1 from 1     

© 2025 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb