Search published articles


Showing 2 results for Microbial Fuel Cell

M Malakootian, M. M Amin, H Jaafari Mansourian, N Jaafarzadeh,
Volume 4, Issue 4 (3-2012)
Abstract

Background and Objectives: Microbial fuel cells are the electrochemical exchangers that convert the microbial reduced power, generated via the metabolism of organic substrate, to electrical energy. The aim of this study is to find out the rate of produced electricity and also treatment rate of simulated wastewater of food industries using dual chamber microbial fuel cell (MFC) without mediator and catalyst.
Materials and Methods: MFC used in this study was consisted of two compartments including anaerobic anode chamber containing simulated food industries wastewater as synthetic substrate and aerobic cathode chamber containing phosphate buffer, respectively. These two chambers were separated by proton exchange membrane made of Nafion. Produced voltage and current intensity were measured using a digital ohm meter and the amount of electricity was calculated by Ohm's law. Effluent from the anode compartment was tested for COD, BOD5, NH3, P, TSS, VSS, SO42- and alkalinity  in accordance with the Standard Methods
Results: In this study, maximum current intensity and power production at anode surface in the OLR of 0.79 Kg/m3.d were measured as 1.71 mA and 140 mW/m2, respectively. The maximum voltage of 0.422 V was obtained in the OLR of 0.36 Kg/m3.d. The greatest columbic efficiency of the system was 15% in the OLR of 0.18 Kg/m3.d. Maximum removal efficiency of COD, BOD5, NH3, P, TSS, VSS, SO42- and alkalinity, were obtained 78, 72, 66, 7, 56, 49, 26 and 40%, respectively.
Conclusion: The findings showed that the MFC can be used as a new technology to produce electricity from renewable organic materials and for  the treatment of different municipal and industrial wastewaters such as food industries.


Farah Rashadi, Nahid Navidjouy, Ali Ahmad Aghapour, Mostafa Rahimnejad,
Volume 14, Issue 3 (12-2021)
Abstract

Background and Objective: Microbial fuel cell (MFC) is a new green technology that uses the catabolic ability of microorganisms to produce bioenergy while simultaneously removing organic matter and other wastewater contaminants. Electrode material is one of the factors affecting the performance of microbial fuel cells. The aim of this study was to investigate the performance of microbial fuel cells in COD removal and bioenergy production from synthetic and real beverage wastewater.
Materials and Methods: In this research, a two-chamber microbial fuel cell with Nafion membrane and aerated  cathode was set up using two electrodes made of carbon felt and flat graphite after being contacted by synthetic wastewater with a concentration of COD 5000  mg/L and real beverage wastewater. Organic matter removal efficiency and voltage, power density and maximum current were determine.
Results: Experimental results showed that maximum COD removal efficiency of 92 % was achieved in synthetic wastewater and with a carbon felts electrode. In this condition, maximum voltage, power density and output current density of 469 mV, 175.28 mW/m2, and 855 mA/m2, were obtained, respectively. However, by using real industrial wastewater (beverage), maximum removal efficiency of COD, voltage, power density and output current density, related to carbon felt electrodes ‎were obtaines as 84 %, ‎460 mV, 91/65 mW/m2, and 635 mA/m2, respectively.
Conclusion: The findings showed that synthetic wastewater outperforms microbial fuel cells in terms of bioelectric production and organic matter removal as compared to real wastewater (beverage). The reason for the decrease in the cell performance might be the presence of solids and other confounding pollutants in real wastewater.


Page 1 from 1     

© 2024 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb