Search published articles


Showing 4 results for Pharmaceutical Waste
Quantity and Quality Analysis and Management of Solid Waste Produced in Dentistry Laboratories and Practical Dentist Offices in Hamedan, 1386
A Kulivand, R Nabizadeh, A Joneidy, M Yunesian, Gh Omrany,
Volume 2, Issue 1 (7-2009)
Abstract

Backgrounds and Objectives:Today, One of the most important environmental issues is solid waste Produced in Dentistry That because of the presence of hazardous, toxic and pathogen agents has special importance. In this survey, solid waste produced in Hamadan Dentistry laboratories and practical dentist offices is studied.
Materials and Methods: In this descriptive study, from 24 Dentistry laboratories in Hamedan 5 offices and from 27 practical dentist offices 5 offices were selected in simple random way. From each offices 3 sample at the end of successive working day (Sunday, Monday and Tuesday) were analyzed. Samples were manually sorted into different 41 components and by means of laboratory scale were measured. Then, measured components were classified based on characteristic and hazardous potential.
Results: Total annual waste produced in Dentistry laboratories and practical dentist offices in Hamaden is 15921.79 and 8677.56 Kg respectively. Production percentages of domestic type, chemical and pharmaceutical waste, potentially infectious and toxic wastes in practical dentist offices were 91.14, 6.7, 2.14 and 0.02 respectively. Dentistry laboratories solid waste comprises of 94.47 percent domestic type and 5.53 percent chemical and pharmaceutical waste. Main components of produced analyzed wastes were 2 components that consist of more than 80 percents of total dental solid waste. So, waste reduction, separation and recycling plans in the offices must be concentrated on these main components.
Conclusion: In order to waste suitable management, it is suggested that in addition to educate waste producer for waste reduction, separation and recycling in the offices, each section of dental waste (toxic, chemical and pharmaceutical, potentially infectious and domestic type wastes) separately and according to related criteria are managed.


The efficiency of composting on the degradation of antibiotic metronidazole as a pharmaceutical waste
A Jonidi Jafari, M Farzadkia, M Gholami, M Mohagheghi,
Volume 11, Issue 2 (9-2018)
Abstract
Background and Objective: Nowadays, the increasing use of antibiotics to control diseases and mismanagement and inappropriate disposal of medicinal wastes cause environmental problems and threatens human health. The present study was conducted to determine removal of antibiotic Metronidazole as one of the most used drugs during the process of composting.
Materials and Methods: In this experimental study, a mixture of livestock manure, fruit, straw and sludge were used for the preparation of compost. Duration of the process was 40 days. Metronidazole was added to the compost reactors at three concentrations of 20, 50 and 100 mg/kg. Totally, 42 Samples were taken weekly. HPLC was used to analyze the samples. The experiment was repeated twice. SPSS22 software was used to analyze the results.
Results: The rate of Metronidazole removal after day 21 and end of the thermophilic phase was 99.9, 96.73 and 93.48 % in the reactors contained 20, 50 and 100 mg/kg, respectively. Increasing concentrations in the reactors caused the removal rate to decrease, while increasing removal time caused to increase the removal rate. At the end of the process, the removal rate for all three reactors was 99.99 %. The physico-chemical properties of the final compost were within the national standard.
Conclusion: The use of an aerobic composting process to degrade antibiotic Metronidazole is an economical, effective and, environmentally friendly method. At the end of the process, 99.99 % of Metronidazole was degraded.
 

Investigating the efficiency of chemical coagulation/Electro-Fenton process in the removal of organic matter from pharmaceutical industry wastewater
Sh Goodarzi, Gh Shams Khoramabadi, M Esmaty, Ma Karami, A Hossein Panahi,
Volume 12, Issue 2 (9-2019)
Abstract
Background and Objective: Wastewater from pharmaceutical industry has high chemical oxygen demand as a result of the presence of organic drugs and antibiotics. In order to meet the environmental requirements, several treatment methods like chemical and electrochemical methods have been widely applied due to their high ability to remove organic compounds from pharmaceutical wastewater. Therefore, the present study aimed to evaluate the efficiency of chemical coagulation/Electro-Fenton treatment method to degrade the organic matter-containing pharmaceutical industry wastewater.
Materials and Methods: The experimental tests were carried out using batch mode. The chemical coagulation process was evaluated as a function of aluminum chloride concentration (25-300 mg/L) and pH (3-10). The effluent from chemical coagulation process was transferred to Electro-Fenton reactor. Effects of H2O2 concentration (100-4000 mg/L), reaction time (up to 120 min), voltage (10-30 V), and pH (3-10) were evaluated. The removal efficiency was determined in term of COD removal.
Results: The results showed that the highest removal of COD in the chemical coagulation was 49% (coagulant dose of 200 mg/L, and pH of 7). In addition, the Electro-Fenton process could be eliminating of 93.5% of COD at the optimum conditions concentration (100 mg/L H2O2, voltage of 20, pH of 3, and contact time of 30 min).
Conclusion: According to the results, it can be concluded that the combination of chemical and electrochemical processes was found to be effective methods for treatment of pharmaceutical wastewater in comparison to the application of each process separately. To reach to the maximum removal efficiency, the environmental parameters should be carefully controlled at their optimum values in each single process.
 

Optimization of the combined integrated fixed film activated sludge and photocatalytic process via iron oxide-titanium dioxide nanocomposite in treating pharmaceutical wastewater
Narjes Khodaygani, Roya Mafigholami,
Volume 14, Issue 4 (3-2022)
Abstract
Background and Objective: Pharmaceutical wastewater has a high level of pollution load that should be treated before discharging to the environment. Integrated processes using different mechanisms are one of the most fruitful methods in wastewater treatment. In this study, combined Integrated Fixed Film Activated Sludge (IFAS) and photocatalytic processes are utilized using of Fe3O4/TiO2 nanocatalysts to decrease the COD value of pharmaceutical wastewater.
Materials and Methods: In this study, the variables of each process are optimized using Response Surface Methodology (RSM). In the IFAS process, the variables were dissolved oxygen (DO), media filling percentage and hydraulic retention time (HRT); while in the photocatalytic process, the effects of pH of wastewater, catalyst dose and reaction time were investigated.
Results: In optimal conditions (DO 3 mg/L, HRT 24 h and media filling percentage 65%), COD removal rate was obtained 59.15%. With the initial concentration of 1725 mg/L COD and the mentioned efficiency, the concentration of COD in the effluent diminished to 704 mg/L. However, in the photocatalytic process, during optimal conditions (pH 6.8, reaction time 105 min and catalyst dose 60 mg/L), The efficiency of the process was determined 81%, which by considering the input COD (704 mg/L), the output concentration was reduced to 134 mg/L.
Conclusion: According to the standards provided by the Environmental Protection Agency (EPA), the effluent from the combined process can be discharged into the environment.
 

Page 1 from 1     

© 2024 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb