Search published articles


Showing 2 results for Photolysis

A Maleki,
Volume 3, Issue 2 (7-2010)
Abstract

Backgrounds and Objectives: Carcinogenic and mutagenic potential of some azo dyes as a category of common dyes in different types of industries has been reported. The degradation of one commercially available dyestuff [C.I. Reactive Red 198 (RR 198)] by means of ultraviolet radiation (UV), ultrasonic irradiation (US), UV/H2O2 and US/H2O2 processes was investigated.
Materials and Methods: Photolysis process was accomplished in a laboratory-scale batch photoreactor equipped with an 55W immersed-type low-pressure mercury vapour lamp (UVC) and sonication in a sonoreactor with low frequency (42 kHz) plate type transducer at 170W of acoustic power with emphasis on the effect of various parameters on decolouration and degradation efficiency.
Results: Initial results showed that, color removal efficiencies by US and US/H2O2 processes were negligible. Almost complete disappearance of RR 198 (20 mg/L) in UV/H2O2 process was possible to achieve after 10 min of irradiation. It is found that lower pH and lower concentration of dye favor the dye degradation. Hence any increase in initial dye concentration results in decreased decolouration rates. Also, the experimental results indicated that the kinetics of sono-oxidation and photo-oxidation processes fit well by pseudo-first order kinetics and first order reaction kinetics, respectively.
Conclusion: It is concluded that UV/H2O2 reaction was more effective than other reactions in bleaching and the reaction rate was sensitive to the operational parameters and increased with increasing H2O2 concentration up to 15 mM.


Majid Kermani, Mitra Gholami, Zahra Rahmani, Ahmad Jonidi Jafari, Niaz Mohammad-Mahmoodi,
Volume 6, Issue 4 (3-2014)
Abstract

Background & Objectives: Cationic dyes such as basic violet have many applications in different industries. The degradation of basic violet by means of UV, UV/H2O2, US, and US/H2O2 processes was investigated. Materials and Methods: Photolysis process was accomplished in a laboratory-scale batch photoreactor equipped with a 55 W immersed-type low-pressure mercury vapor lamp (UVC) and sonolysis process was investigated in a sonoreactor with high frequency (130 KHZ) Plate Type transducer at 100 W of acoustic power with emphasis on the effect of various parameters and addition of Na2SO4 on discoloration and degradation efficiency. Results: Complete decolonization of cationic BV 16 was achieved in 8 minutes using UV/H2O2 process. In addition, it was found that sonochemical decolorization is a less efficient process, comparing with photochemical process, as the decolorization proceeds to only 65% within 120 min. Low concentration of dye and natural pH resulting from dissolution of salt favors the degradation rate of dye. The results showed that sodium sulfate enhances the rate of sonochemical degradation of dye. In addition, kinetic parameters were obtained by application of first order equations. Conclusion: The results showed that UV/H2O2 and US/H2O2 processes can be effective in the removal of BV16 from aqueous solutions. Considering dye removal efficiency and availability, photochemical process combined with hydrogen peroxide can be recommended as a fast effective method for removal of dyes from aqueous solutions.

Page 1 from 1     

© 2024 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb