Showing 14 results for Biodegradation
M Farzadkia, R Rezaee Kalantari, S Jorfi, A.r Talaee, G.r Moussavi,
Volume 2, Issue 1 (7-2009)
Abstract
Background and Objectives : Propylene glycol is the main compound of anti-freezing chemicals. A significant amount of propylene glycol is released to the environment after application and contaminates the soil. The main objective of this study was to determine the biological removal of propylene glycol from wastewater and its degradation in soil by the isolated bacteria from activated sludge process.
Materials and Methods: In the present study, the sludge taken from the return flow in a local activated sludge treatment system was used as the initial seed. The performance of the bioreactor in treating the wastewater was evaluated at four different retention times of 18, 12, 6 and 4 h all with the inlet COD concentration of 1000 mg/L. This phase lasted around 4 months. Then, a part of the adapted microorganisms were transported from the bioreactor to the soil which was synthetically contaminated to the propylene glycol.
Results: The average of propylene glycol removal efficiency from the wastewater in detention times of 18, 12, 8 and 4 h in steady state conditions was 98.6%, 97.1%, 86.4% and 62.2% respectively. Also, the maximum degradation in soil was found to be 97.8%.
Conclusion: According to the results obtained from this study, it appears that propylene glycol is inherently well biodegradable and can be biodegraded in liquid phase and soil after a short period of adaptation.
S Jorfi, N Jaafarzadeh Haghighifard, R Rezaei Kalantary, Y Hashempur,
Volume 2, Issue 1 (7-2009)
Abstract
Backgrounds and Objectives: Direct biodegradation of landfill leachate is too difficult because of high concentrations of COD and NH3 and also the presence of toxic compounds. The main objective of this study was to application of Strurvite precipitation as a pretreatment stage, in order to remove inhibitors of biodegradation before the batch decant activated sludge process with addition of powdered activated carbon (PAC).
Materials and Methods: Strurvite precipitated leachate was introduced to a bench scale batch decant activated sludge reactor with hydraulic retention times of 6 and 12 hour. PAC was added to aeration tank directly at the rate of 3.5 g/L.
Results:TCOD, SCOD, NH3 and P removal efficiency with addition of PAC in HRT of 6 h were 90,87, 98.3 and 94 % respectively and 96, 95, 99.2 and 98.7 5 in HRT of 12 h.
Concusion:According to obtained data from this work, it can be concluded that Strurvite precipitation before batch decant activated sludge process and simultaneous addition of PAC is promising technology for leachate treatment and can meet effluent standards for discharge to the receiving waters.
F Rashid Ashmagh, R Rezaei Kalantary, M Farzadkia, A Joneidy Jafari, R Nabizadeh,
Volume 2, Issue 3 (11-2009)
Abstract
Backgrounds and Objectives: Polycyclic aromatic hydrocarbons (PAHs) are a group of hazardous pollutants which have carcinogenic and mutagenic properties and accumulated in environment by different actions, therefore treatment of them is important. Biological treatments are simple and cheep technologies. This technology was recommended as a cost- effective method for treatment of these pollutants. In order to investigate the trend of pollution reduction of petroleum hydrocarbons in bioremediation, the phenanthrene biodegradation&aposs model in contaminated soils was studied.
Materials and Methods: Firstly, PAHs capable degrading bacteria was isolated from petroleum contaminated soils and then their ability for biodegradation of phenanthrene was assessed in slurry phase. After that by using Acinetobacter which have the most potential of removing phenanthrene from soil, the biodegradation model was investigated in bench scale.
Results: Phenantherene removal efficiency was obtained 99.4% for 100 mg/kg and 96 % for 500 mg/kg concentrations in 33 and 60 days biodegradation period respectively. Phenantherene reduction rate varied from 2.99 to 8.86 and 1.4 to 11.09 mg/kg/day for 100 and 500 mg/kg concentrations, respectively.
Conclusion: Rate of phenantherene removal is depended on primary concentration of contamination and by increasing of primary concentration, phenantherene removal rate was increased. Also removal efficiency followed zero and first order kinetic model with good correlation.
A.r. Talaie Khozani, N Jafarzadeh Haghighi Fard, M.r Talaie Khozani, M. Beheshti,
Volume 3, Issue 2 (7-2010)
Abstract
Backgrounds and Objectives: Oil pollution can be generated as a result of spillage, leakage, discharge, exploration, production, refining, transport and storage of crude oil and fuels in the environment. Consequently, many researchers have developed and studied the chemical, physical and biological methods to degrade crude oil. Among them, the biological treatments are the most interesting as they are simple and economical methods. The aim of this study was to determine biokinetic coefficients of crude oil degradation by pseudomonas aerogenusa. This microorganism was isolated in our previous work.
Materials and Methods: In this study the bio-kinetic coefficients of crude oil biodegradation were evaluated. Pseudomonas aerogenusa bacteria which had been isolated from the soil sample taken from a gas station in our previous work were used in this study. This microorganism was cultured in the liquid medium containing crude oil as sole carbon source. Finally with determining the amount of microorganisms and crude oil concentration during biodegradation process, the bio-kinetic coefficients based on modified Monod equation were calculated.
Results: bio-kinetic coefficients obtained from laboratory studies are vital factors in industrial applications. As a result, the bio-kinetic study was performed to find bio-kinetic coefficients for biodegradation of crude oil using the isolated bacteria. The results showed that ,Y, k and were equal 0.107 , 0.882 , 9.39 and 169.3 respectively.
Coculusion:Our results showed that pseudomonas aerogenusa is usable for treatment of oily wastewaters in the full scale facility. Results of this study indicated bio kinetics confections.
P Bahmani, R Rezaei Kalantary, M Gholami, A Jonidi Jafari, Z Javadi,
Volume 3, Issue 4 (1-2011)
Abstract
Backgrounds and Objectives: Reactive dyestuff has potential of toxicity, carcinogenesis and mutagenesis for mammals and aquatic organisms. The current physical and chemical methods such as adsorption, coagulation, precipitation, filtration and ... can been used for removing of dyestuff. Biological treatment which is effective and economic for decontamination of dyestuff wastewaters was preferred because of limitation and difficulty of physicochemical methods. In order to investigate the trend of pollution reduction of color compounds, ability of Remazol Black-B dyestuff removal from aqueous medium by bacterial consortium under anoxic conditions was studied.
Materials and Methods: The mix culture of bacteria from textile industries activated sludge was enriched in luria broth medium containing RB-B dyestuff as a carbon source. Then biodegradation was assessed in 4 batch reactors. Microbial population of bacterial and decolorization quantities of samples were detected by MPN and UV-Vis spectrophotometer.
Results: Decolorization efficiency by the bacterial consortium was obtained more than 99% for 50 and 250 mg/L concentrations in 72 and 144 h (3 and 6 days) respectively, while for the initial concentration of 500 mg/L was 98.1in 240 h (10 days) of biodegradation period. Dyestuff reduction rate after completed removal was about 0.69, 1.74,2 mg/L/h for initial concentration of 50, 250, 500 mg/L respectively.
Conclusion: Results showed that Alcaligenes denitrificans and Alcaligenes xylosoxidans bacteria
which were isolated from activated sludge have good potential of RB-B dyestuff removal and this removal is depending on primary concentration of dye. Removal efficiency increased as primary concentration went up.
M Manshouri, A Yazdanbakhsh, M Sardar, A Sheykh Mohammadi,
Volume 3, Issue 4 (1-2011)
Abstract
Backgrounds and Objectives: Reactive dyestuff has potential of toxicity, carcinogenesis and mutagenesis for mammals and aquatic organisms. The current physical and chemical methods such as adsorption, coagulation, precipitation, filtration and ... can been used for removing of dyestuff. Biological treatment which is effective and economic for decontamination of dyestuff wastewaters was preferred because of limitation and difficulty of physicochemical methods. In order to investigate the trend of pollution reduction of color compounds, ability of Remazol Black-B dyestuff removal from aqueous medium by bacterial consortium under anoxic conditions was studied.
Materials and Methods: The mix culture of bacteria from textile industries activated sludge was enriched in luria broth medium containing RB-B dyestuff as a carbon source. Then biodegradation was assessed in 4 batch reactors. Microbial population of bacterial and decolorization quantities of samples were detected by MPN and UV-Vis spectrophotometer.
Results: Decolorization efficiency by the bacterial consortium was obtained more than 99% for 50 and 250 mg/L concentrations in 72 and 144 h (3 and 6 days) respectively, while for the initial concentration of 500 mg/L was 98.1in 240 h (10 days) of biodegradation period. Dyestuff reduction rate after completed removal was about 0.69, 1.74,2 mg/L/h for initial concentration of 50, 250, 500 mg/L respectively.
Conclusion: Results showed that Alcaligenes denitrificans and Alcaligenes xylosoxidans bacteria
which were isolated from activated sludge have good potential of RB-B dyestuff removal and this removal is depending on primary concentration of dye. Removal efficiency increased as primary concentration went up.
Leila Moradi Pasand, Bita Ayati,
Volume 6, Issue 3 (12-2013)
Abstract
Background and Aim: In this study, the removal of dye blue reactive-171 by combination of advanced oxidation processes UV/H2O2 and SBAR has been investigated. Methods: The efficiency of chemical and biological system was first investigated separately. In chemical system, the kind, power, initial dye concentration and hydrogen parasitize and in biological system, hydraulic detention time, aeration rate, initial dye concentration and the percent removal of dye and COD were investigated. In order to investigate the hybrid system, after determination of the optimum conditions and the capabilities of each system, the removed chemical system effluent from residual hydroxide peroxide, was entered into the biological reactor. Results: In the chemicals process, 100 ppm dye using 150 Watt-UV-C lamp and 0.1 mM hydrogen peroxide at pH= 9 was completely removed in 25 minutes. COD removal was 86.7 percent at the end of the experiment (135 min). Biological system with adsorption mechanism has shown 44 percent dye removal with initial COD of 50 mg/L that indicated the system inability in biodegradation and breaking down of the dye molecule. In comparison to separate chemical and biological processes, hybrid system has shown better dye removal efficiency. The results indicated that in addition to the complete dye removal achievement, 81% of COD in the first hybrid system and 52% of COD in the second hybrid system was removed, respectively. Conclusion: According to the results, because of complexity of dye structure, biological system was not able to remove the dye as efficient as hybrid system of advanced oxidation processes UV/H2O2 with SBAR.
Ali-Reza Chackoshian Khorasani, Mansur Mashreghi, Soheila Yaghmaei,
Volume 6, Issue 3 (12-2013)
Abstract
Background and Objectives: Modelling and specifying mathematical equations to predict and estimate a bioprocess is one of the important applications of bioengineering. Objective of this study was to identify proper and exact equations to describe various changes in biodegradation of heavy fuel oil through investigating kinetic models and third parametric equation of Ch. Materials and Methods: To submit an exact and perfect enough statement, two different experimental conditions were used in which isolated indigenous bacteria from environment were employed. Experiments were carried out during ten days and microbial growth, mazut concentration, pH, and electric potential curves were drawn. Fitting data onto kinetic models and Ch equation resulted accuracy and their constants. Results: We found that kinetic models were not capable to present an accurate and appropriate statement under different conditions. On the other hand, Ch equation by extending very accurate equations could satisfyingly illustrate mazut, pH, and electric potential changes based on time and microbial growth. Conclusion: Ch equation by reason of using two variables for computation of third variable and correctly selecting variables could describe various changes in mazut biodegradation under different conditions via mathematical statements. Moreover, it is possible that this equation can be used to study other various phenomena in future.
B Nadalian, M Shahriari Mogadam, G.h Ebrahimipour, B Nadalian,
Volume 8, Issue 4 (3-2016)
Abstract
Background and Objectives: Organophosphate pesticides are used most commonly for domestic, commercial, and agricultural purposes and have been found to be highly toxic. In essence, bioremediation has become one of the most important tools for removing these compounds in the environment, considering its higher efficiency when compared with the physicochemical methods.
Materials and Methods: The biodegradation efficiency of two bacterial strains (i.e. Serratia marcescens BNA1 and Pseudomonas aeruginosa BNA2) were assessed. In order to evaluate Malathion biodegradation, each sample was cultured on mineral salts medium containing Malathion as a sole carbon source. Malathion biodegradation efficiency of the strains was monitored in different culture media. The ability of bacterial isolates to degrade Malathion was studied using gas chromatography.
Results: Serratia marcescens BNA1 and Pseudomonas aeruginosa BNA2 were able to degrade Malathion. Biodegradation percentage in different treatments recorded were: BNA1+Ma (33.88%), BNA2+MA (26.45%), BNA1+BNA2+Ma (46/96%), BNA1+Ma+Tween (61.05%), BNA2+Ma+Tween (40.17%), and BNA1+BNA2+Ma+ Tween (67.79%).
Conclusion: It could be speculated that the best degradation efficiency can be yielded using mixture of strains plus a surfactant. The results of this study can be used in the bioremediation of Malathion contaminate soil after doing the pilot experiments.
S Torbati,
Volume 9, Issue 4 (3-2017)
Abstract
Background and Objective: Malachite green dye is used in many industries including textile industries. Disposal of wastewaters containing the dye to the environment, can lead to many environmental problems. Currently, many physico-chemical approaches are used for wastewater treatment. Because of limitations and difficulties of these methods, biological treatment is considered as an economic and effective treatment method. The aim of the present study was to study the feasibility of phytoremediation of malachite green dye using watercress and investigate the effect of some environmental factors in removal efficiency.
Materials and Methods: After collection, the plants were kept in the laboratory, and they were treated with different concentrations of malachite green. During the experiments, decolorization extent was determined by UV-Vis spectrophotometry. Intermediate compounds generated during the biodegradation of the pollutant were identified using GC-MS method.
Results: After 7 days, the ability of watercress in removal and biodegradation of 10 mg/L of malachite green solution was more than 90%. Five intermediate compounds were identified in the biodegradation pathway of the pollutant. It was also found that increasing dye concentration up to 20 mg/L led to the increase of the plant photosynthetic pigment contents and activities of antioxidant enzymes.
Conclusion: Our results showed that watercress has high ability in the dye removal of malachite green. The reusability of the plant for decolorization confirmed the biological degradation process. Moreover, an increase in the plant biomass, temperature and pH led to the increased decolorization efficiency.
M Khalaji, Sa Hiseini, R Ghorbani, N Agh, H Rezayi,
Volume 12, Issue 2 (9-2019)
Abstract
Background and Objective: Nutrient-rich effluents (mainly nitrogen and phosphorus) may lead to algae blooms and many harmful effects in aquatic environments. Micro-algae have been more effective among the various methods used for the removing of nutrients from wastewater. Microalgae Chlorella vulgaris has specific characteristics such as rapid growth, resistant to systems manipulation, simple and inexpensive production technology, as well as the rapid uptake of nutrients such as phosphate and nitrate.
Materials and Methods: In the present study, two concentrations of chlorella vulgaris microalgae (13 and 26 million cells/mL) were injected into dairy effluent, diluted using distilled water by 25, 50 and 75%, and the amount of nutrient removal and microalgae growth were examined during the growth period.
Results: Results indicated that different concentrations of algae at various percentages of dilution (25, 50, 75%) had a significant effect on the removal of nutrients and algal growth (p<0.05). The absorption of nutrients (nitrate, phosphate and ammonia) were 57.01, 51.84 and 43.15 percent respectively that containing lower density of initial algae compared to the treatments of 2nd group (29.15, 51.84 and 43.15 percent) with higher algae concentration. In both algal concentrations, the highest percentage of phosphate and ammonia adsorption were in dilution of 25% effluent and the highest percentage of nitrate adsorption were in the first group with 50% dilution and in the second group with 75% dilution.
Conclusion: The more percentage of nutrients (nitrate, phosphate, ammonia) was eliminated compared to the second group (26 million cells / mL) when the microalgae concentration (group I) was 13 million cells / mL. Absorption of nutrients was decreased by increasing the concentration of microalgae. Regarding to the percentage of nitrate adsorption, the higher absorbance in the dilution was occurred at the highest concentration of algae.
E Khanpour-Alikelayeh, A Partovinia, A Talebi, H Kermanian,
Volume 12, Issue 4 (2-2020)
Abstract
Background and Objective: Petroleum compounds are major contributors to aquatic environmental pollution. In recent years, biological treatments as environmental-friendly and cost-effective techniques have been used alongside the various physico-chemical methods. Microbial cell immobilization in hydrogel carriers has been the focus of researchers due to various advantages such as ease of microbial species control, non-direct exposure of pollutants to the cells, increasing cell resistance during different types of stresses and reusability. The main goals of this study were introduction to electrospraying technique in order to size reduction of alginate beads and comparison of heavy crude oil biodegradation using an isolated strain of Bacillus licheniformis in free and immobilized cells.
Materials and Methods: The oil-degrading strain was isolated from oil-polluted site on Kharg Island. Microbial cells were examined in both free and immobilized systems under different conditions (pH=5,7) and initial crude oil concentration (1500,3500 ppm). Electrospraying technique was used for alginate beads production. Residual crude oil content was analyzed by gas chromatograph and gravimetrically method.
Results: The maximum oil removal (61%) was obtained for the immobilized cells at a concentration of 3500 ppm in neutral medium. Overall, according to the results, after the 14th day, the biodegradation through the immobilized cells was significantly (p<0.05) higher than the free cells. Moreover, the cell immobilization caused the microorganisms to be more resistant to the harsh environments.
Conclusion: This study showed that the immobilized microbial cell system has a great potential for oil wastewater treatment. The electrospraying technique can be used to overcome to the mass transfer limitations.
Mohsen Ansari, Mehdi Farzadkia,
Volume 15, Issue 2 (8-2022)
Abstract
Background and Objective: The high concentration of petroleum hydrocarbons, along with some other parameters such as aromatics, paraffin, naphthene, and heavy metals, has led to the sludge of oil sludge listed as hazardous materials with a specific source by the US Environmental Protection Agency. Therefore, the purpose of this study is to investigate the potential of oil-contaminated soil in changing the biodegradability indices of oil sludge.
Materials and Methods: Moisture, pH, total organic carbon, total nitrogen, total phosphorus, elemental analysis, and amount and type of TPH of oil sludge samples were identified. The microbial consortium was isolated from contaminated oil soil around the oil refinery and poultry manure. Finally, biodegradability indices of oil sludge were examined.
Results: The results showed that the amount of organic carbon and nitrogen in oil sludge samples were 32.65 and 0.21%, respectively. Also, iron, calcium, and potassium with 5862, 2921, and 524 mg/kg, respectively, were the most elemental components in petroleum sludge. According to the SARA analysis, the highest TPH compounds in oil sludge samples included saturated compounds, aromatics, resins, and asphaltene with 70.45%, 15.2%, 10.9%, and 3.45%, respectively.
Conclusion: According to the results of biodegradability indicators of oil sludge, it can be concluded that the isolated consortium can be proposed as a suitable tool for the treatment of petroleum sludge at the bottom of crude oil storage tanks.
Zohreh Naderi, Hiwa Hossaini, Meghdad Pirsaheb, Akbar Barzegar, Sara Kianpour,
Volume 15, Issue 3 (12-2022)
Abstract
Background and Objective: Toluene is one of the most important volatile organic compounds that threaten human health and introduce many environmental problems. Therefore, the present study aims to determine the performance of a biofilter based on pine cones/compost to remove toluene vapors from polluted air streams.
Materials and Methods: In this research, a biofilter with a volume of 19.468 L was designed and built. The biofilter bed consisted of two parts 26 cm in height and packed with a mixture of compost and pine cones in 1:1 volumetric ratio. After inoculating the bed with sludge from a municipal wastewater treatment plant and making it compatible with toluene, the performance of the biofilter in different parts of the bed was investigated at the inlet toluene concentrations of 2.5-5.5 g/m3 and Empty Bed Retention Times (EBRTs) of 1.3, 1.7, and 2.43 min. Also, the results were analyzed statistically.
Results: At EBRT of 2.43 min and different inlet toluene concentrations of 2.5-5.5 g/m3, the removal efficiency reached 100 percent. Also, the removal efficiency decreased with the reduction of EBRT. The results showed that removal efficiency was higher in the first part of the biofilter bed relate to the second part. At an inlet toluene concentration of 2.62 g/m3 and EBRT of 1.7 min, the maximum elimination capacity (ECmax) of 2.74 g/m3.min was obtained.
Conclusion: In all experimental conditions the outlet concentration of pine-cone/compost biofilter was below the WHO standard (260 µg/m3). Also, the high elimination capacity of biofilter verified its capability toward toluene removal from polluted gas streams.