Showing 18 results for Drinking Water
M Mohammadian, J Nouri, N Afshari, J Nassiri, M Nourani,
Volume 1, Issue 1 (10-2008)
Abstract
Background and Objectives: Heavy metals processing industry has always been a major cause of concern which affects soils, surface waters, ground waters and river sediments contaminations. Thus, the Zanjan Zinc and Lead Smelting Plant has been considered as a potential source of contamination.
Mterials and Methods: This cross-sectional study has been conducted in February 2008 in the site region .The concentrations of Lead, Zinc and Cadmium have been assessed. The samples have been taken from 17 wells and atomic absorption spectrophotometeric method has been used to assess the samples. In order to find out and locate the exact situation of the wells under study, Global Positioning System instrument has been used. The correlation between the concentration of each metal and the distance of studied well from the plant has been assessed too.
Results: The findings of this study showed that lead and cadmium concentrations were 53% and 59% respectively out of the guideline values of World Health Organization.
Conclusion: The concentration of Zinc was lower than both national and international values in all samples. As the heavy metal concentration is very important for human health status, the other fields of study like heavy metal air pollution effects and related diseases and conditions should be studied and assessed.
M.h Dehghani, M Ghaderpoori, M Fazlzadeh, S Golmohamadi,
Volume 2, Issue 2 (9-2009)
Abstract
Backgrounds and Objectives:Safe drinking water providing is one of the main purposes in the community. Development and improvement of community is related to the public health. In this study !we studied the bacteriological quality of 116 villages under coverage of the water and wastewater companies in rural areas of Saqqez in.1386
Material and Methods:Drinking water of these rural areas have provided of deep, semi-depth- wells and spring water sources. Because in numerous rural areas both sources of drinking water and in some of them different sources of drinking water were used (old and new storage water source), in general, 359 samples were collected and transferred to the laboratory for testing to evaluate its quality. We also used linear Regression statistical analysis for collected data.
Results:results show that residual chlorine in drinking water in 33.88 percent of rural areas population were in range 0.2-1 mg/l. For 98.3 percent of the seqqez rural population, the turbidity was lower than the maximum permissible levels of drinking water standards of Iran (5 NTU). There was no any E.coli contamination in 88 percent of drinking water in saqqez rural areas.
Conclusion:Based on WHO guidelines concerning the microbial quality of water published in 2006! the average indicator for lack of E.coli in water of rural areas of seqqez was 88 percent and water is safe or good for drinking.
M Khodadadi, M.t Samadi, A.r Rahmani, R Maleki, A Allahresani, R Shahidi,
Volume 2, Issue 4 (3-2010)
Abstract
Backgrounds and Objectives: Water contamination by pesticides is considered as an environmentalproblem today. In terms of agricultural development and diversity of plant pests, the use of pesticides has been increasing. Hamedan province has a suitable agricultural condition, it has enjoyed significant development in this respect. Among all the cities of Hamedan province, Hamedan city has the highest rank in tiller crops. Therefore, yearly use of pesticides is increasing in this area which could be a serious threat to water resources of the city. The aim of this survey was determinaton of Organophosphorous and Carbamat pesticides residue in drinking water resources of Hamadan in 2007.
Materials and Methods: In this survey, 126 water samples were collected from 7 drinking water resources of Hamedan during 12 consecutive months in 2007. for determination of these pesticides,two methods (solid- phase extraction and Liquid-Liquid extraction) were adopted .and samples were analyzed by means of HPLC and GC/MS applying standard methods.
Results: Final results showed that the most concentration of Chlorpyrifos and Carbaryl pesticides were found to be about 3.85 ppb (part per billion) and 1.8 ppb in spring and June respectively the maximum concentration of Diazinon was about 36.5ppb in October (autumn).The minimum concentration of the three pesticides was detected in winter. According to the statistical test Two - Way ANOWA there were significant differences among pesticides concentrations in the water samples in different seasons (p<0.05) . However, there wasn't a significant difference in pesticides concentrations in surface and ground water samples(p>0.05).
Conclusion: Different studies have shown that pesticides residue concentration in water samples have a relationship with the amount of pesticides used in an area, physical and chemical refractory properties of pesticides and environmental conditions. Thus, using resistant pollutants such as pesticides will be a serious threat to health of water consumers if they are not properly controlled.
A.r Mesdaghi Nia, A.h Mahvi, S Naseri, A.a Mohamadi, M Shekarriz, M Alimohamadi,
Volume 4, Issue 3 (10-2011)
Abstract
Background and Objectives: New studies indicate that nitrate concentration in groundwater is increasing in most cities. High concentrations of nitrate in water increase the potential health risk in the community and the environment. In infants, No3 _ is reduced to No2 _, which combines with hemoglobin in the blood to form met hemoglobin leading to blue-tinged blood for babies under six months old in particular ,Namely, so-called ‘‘blue baby syndrome&apos&apos and it also produce carcinogenic compounds . Therefore high nitrate concentration is important. The aim of the present study is removing nitrate from water using zero_valent iron.
Materials and Methods: Analyses were conducted on synthetic samples. These samples were analyzed considering reaction times, pH, initial nitrate and sulfate concentration.
Results: Results showed that at Nitrate with an initial concentration of 200mg L1- after 60 min of reaction at pH(s) 7, 6 and 5 about 67.8%, 72.5 % and 88% was reduced, respectively in concentration of 100 and 300 mgL- (pH=6) the removal efficiency is 60 and 83 percent, respectively. In sodium sulfate and nitrate with concentration of 300, the removal efficiency reached from 72 to 70 percent.
Conclusion: Results show that the initial pH is important to achieve maximum efficiency of nitrate removal. So the lower pH levels increases removal efficiency of nitrate. All of the experiments indicated that removal is the highest in the first 5 min. Generally with an increasing initial nitrate concentration the removal efficiency of nitrate increases.
Mohammad Ali Hosseinpour Feizi, Mohammad Mosaferi, Saeed Dastgiri, Maasumeh Mehdipour, Ahmad Kusha,
Volume 5, Issue 3 (10-2012)
Abstract
MicrosoftInternetExplorer4
Background and Objectives: Intake of high concentrations of fluoride in drinking
water can cause dental fluorosis. In this study, the prevalence of dental
fluorosis in rural communities of East
Azerbaijan Province
was studied.
Materials and Methods: 3 villages of Bashsizkooh, Bostanabad (fluoride concentration in drinking water
= 0.12 mg/L), Nagharehkub, Ahar (current
water resource = 0.6 mg/L, old water resource = 1.1-1.2 mg/L), and Gharehbolaq,
Jolfa (current water resource = 0.35 mg/L and old water resource = 2.4 mg/L old
source) were selected as low, medium, and high exposure to fluoride
respectively. All village residents above 6 years old were visited by
physician. Quality of water resources was determined by referring to the
records archived and through conducting new analysis.
Results: Dental
fluorosis was observed in 62.7 % of the people visited. In 31.5% of
participants, fluorosis Grade 1 in 22.4 % of participants, fluorosis grade 2
in 7.7 % of participants, fluorosis grade 3 and finally fluorosis grade 4 was
observed in 4 patients. Different levels of fluorosis were observed in
residents of the villages of Gharebolaq, Nagharehkub, and Bashsizkooh (83.3%,
70.5 %, and 32.5 % respectively). There was a significant difference in
prevalence of fluorosis between villages (P < 0.001). Fluorosis was observed
in both permanent and temporary teeth. Mean cumulative fluoride index (MCFI) in
people with and without fluorosis was 22660.2 and 4743.2 mg, respectively.
There was a correlation between this index and fluorosis (R =0.413).
Conclusion: In all
three villages studied, even Bashsizkooh, different grades of fluorosis were
endemic. It is recommended that the responsible authorities take a new measure and approach for the intake of fluoride from drinking
water.
!mso]>
ject classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui>
Mohaad-Reza Mohebbi, Koshyar Azam Vaghefi, Ahmad Montazeri, Mehrnoosh Abtahi, Sogol Oktahi, Reza Gholamnia, Fatemeh Aliasgari, Reza Saeedi,
Volume 6, Issue 2 (9-2013)
Abstract
Background and objectives: In this research, an innovative drinking water quality index for assessing water resources as “modified drinking water quality index (MDWQI)” was developed and applied for evaluating all of the groundwater resources utilized for community water supply in urban areas of Iran during 2011. Materials and methods: Twenty-three water quality parameters and relevant Iranian standards for drinking water quality were selected as input parameters and benchmarks respectively. The MDWQI is calculated using three factors including the number of parameters that excurse benchmarks, the number of measurements in a dataset that excurse benchmarks and the magnitude of excursions. The MDWQI scores range from 0 to 100 and classify water quality in five categories as excellent (95-100), good (80-94), fair (65-79), marginal (45-64), and poor (0-44). Results: According to the MDWQI value, about 95% of the groundwater resources were in the good condition and the others were in the fair or marginal condition also the best and the worst water quality of water resources were observed in Ardebil Province and Qom Province respectively. The three parameters of fluoride, magnesium, and nitrate recorded the highest rates of violation to be 74, 32, and 13% respectively. Conclusion: The nationwide average score of the MDWQI was 85 (good description). This study indicated that the MDWQI and its sub-indices could describe the overall water quality of water bodies easily, reliably and correctly and have the potential suitability for extensive application all over the world.
B Sepehrnia, R Nabizadeh, A.h Mahvi, S Naseri,
Volume 9, Issue 1 (6-2016)
Abstract
Background and Objective: In this study, WQI was estimated using an Iranian software called IWQIS to assess drinking water quality in Ray Township distribution systems.
Materials and Methods: The assessment of 73 samples of drinking water during 2013 and the comparison of 18 physicochemical parameters with the standard Code of 1053 (Iran National Standard) was done.
Results: The results showed that the concentration of 7 parameters is out of normal range in special percentage of the samples. Those parameters are as follow: total hardness (31.5%), Mg (46.6%), nitrate (50.68%), Na (45.2%), F (42.46%), Cl (2.7%), Sulfate (28.76%) of samples. The medium concentration of theses parameters was: total hardness (375 mg/L), Mg (32 mg/L), Nitrate (47.43 mg/L), Na (187 mg/L), F (0.5 mg/L), Cl (169 mg/L), and Sulfate (263 mg/L). It is estimated that 5.6% of the population of this township are highly exposed to nitrate, 79.1% to fluoride and 13.5% are exposed to sodium. The average WQI in Rey Township in a good spectrum is 71.22.
Conclusion: 17 samples (23.2%) were assessed in excellent spectrum, 54 samples (74%) in good and 1 sample (1.4%) in very poor spectrum and 1 sample in unsuitable condition were assessed. No sample was assessed in poor situation. The samples of the autumn showed the worst quality.
S Shakur, Aa Nadiri, A Asghari Moghaddam, M Vadiati,
Volume 9, Issue 3 (12-2016)
Abstract
Background and Objective: Human health depends on clean and safe drinking water more than anything. In Bilverdi Plain, the main source of drinking water is groundwater that has got a low quality in some places. Therefore, the drinking water of this area needs detailed evaluation of quality. In this research, the drinking water of Bilverdi Plain was evaluated based on fuzzy and deterministic methods.
Materials and Methods: Totally, 15 samples were collected from different places in September 2013. Major water ions including fluoride and nitrate of the samples taken were measured at hydrological lab of University of Tabriz. To check the quality of water, Schoeller diagram in GWW environment and MATLAB software in fuzzy inference system were used and their results were compared with each other.
Results: Based on the results in deterministic method, the quality of drinking water was classified ranging from good to undesirable. However, in fuzzy method in addition to water quality, the potability confidence of samples was offered in which water in six samples with reliability percent from 13.8 to 14.7; in five samples with 50% confidence level and in four samples with confidence percent from 73 to 85 were desirable, acceptable and unacceptable respectively.
Conclusion: The results show the higher accuracy and capability of fuzzy method rather than deterministic method. Because it is proper to deal with uncertainty in the different parameters and all effective parameters on water quality could be considered together in the evaluation and it offers confidence level for potability of water.
R Nabizadeh Nodehi, Ar Mesdaghinia, S Nasseri, M Hadi, H Soleimani, P Bahmani,
Volume 9, Issue 4 (3-2017)
Abstract
Background and Objective: Water corrosion and scaling are known as destructive phenomenon of drinking water quality and water facilities. In this study, the groundwater tendency to corrosion or scaling in source water, water storage reservoirs and distribution system were studied. Simultaneous use of some qualitative and a quantitative index along with statistical analyses to assess the water scaling or corrosion tendency were investigated.
Materials and Methods: The data analysis of groundwater, water storage reservoirs and water distribution system in rural area of Kurdistan province were analyzed and the amount of Langelier (LI), Ryznar (RY), Pockorius (PSI) and Larson–Skold (LS) and CCPP indices were determined. Corrosion and scaling threshold for qualitative indices were determined based on CCPP index. The mean of indices was compared with the thresholds using independent t-test. ANOVA was used to assess the difference between the indices in different sources of water.
Results: The balance range for LI, RY and PSI found to be -0.1-0.05, 7-9 and 7.1-8.5. The mean CCPP for groundwater, reservoirs and networks were 9.27 ± 1.29, 9.13 ± 1.25, 11.25 ± 1.23, respectively. All three sources of water have some tendencies toward scaling; however, a significant balance status was confirmed statistically. According to Larson–Skold index, sulfate and chloride anions did not play a role in scaling process.
Conclusion: The use of qualitative indices with CCPP index can provide more accurate estimation of water tendency toward scaling or corrosion. The assessment of qualitative indices along with CCPP is recommended in drinking water corrosion monitoring studies.
Z Nejatijahromi, Hr Nassery, M Nakhaei, F Alijani,
Volume 10, Issue 4 (3-2018)
Abstract
Background and Objective: Irrigation of agricultural lands with treated wastewater in the main part of the Varamin plain, the highly populated urban areas of the middle part of the plain, and the presence of industries have increased the actual risk of heavy metal contamination of groundwater. Therefore, the concentrations of heavy metals were investigated in this study in order to assess the risk of using groundwater of Varamin aquifer for drinking purposes.
Materials and Methods: A total of 78 groundwater samples were collected to measure the concentrations of Cu, Pb, Zn, Cr, Cd, Fe, Co, and Mn ions. The bivariate correlation analysis has been used to describe the correlation between hydrochemical parameters in the Varamin area. Heavy Metal Evaluation Index (HEI) and Heavy Metal Pollution Index (HPI) of the groundwater were determined to determine the feasibility of drinking supply in Varamin plain.
Results: The average concentrations of cadmium in dry and wet periods were 7.5 and 8 μg/L, respectively. In the wet period, the average concentration of lead in the groundwater of the Varamin plain was 12.5 μg/L. The concentrations of both heavy metals were more than the permissible amount for drinking. Pearson correlation analysis of qualitative data of the water samples of the Varamin plain showed a strong correlation between some heavy metals such as Pb and Co with Cd, Cu and Mn. This reflected a similar source of contamination of the groundwater, inter-correlations, and the same mobility behaviors in the aquifer media. The results obtained from HEI and HPI showed that the pollution of Varamin aquifer in most parts was not dangerous with respect to the heavy metals concentrations, but in some areas, significant variations in the concentrations of some metals can be observed.
Conclusion: It may be expected that the risk of groundwater contamination continues with respect to heavy metals due to the persistence of contamination sources in the Varamin plain. Hence, some measured should be taken with regards to the agricultural recycle water, dispose of domestic and industrial wastewater, and the quality of transferring treated effluent from Tehran to the plain.
Ar Mesdaghinia, S Nasseri, M Hadi, E Iravani, M Askari,
Volume 10, Issue 4 (3-2018)
Abstract
Background and Objective: Supply of safe drinking water to each community is one of the most important challenges in improving the general community’s health. Considering the importance of the research on water quality, identification of water quality research gaps was performed by reviewing the relevant studies through a systematic review for Iran.
Materials and Methods: In this study 638, 166, 300 and 1000 relevant articles were found on Scopus, SID, Magiran and Iranmedex databases, respectively. Out of 2104 articles, 1394 articles were excluded from the study. Finally, 710 articles were further reviewed.
Results: Monitoring of pollutants by a descriptive study was the main objective of the most studies (36.62%). Around 13% of the studies were performed on a laboratory scale. Organic pollutants in Iran have been concerned only in 17 provinces, and other provinces have not participated in this regard. Nitrate is studied in around one fifth of the total studies. Heavy metals were also considered as a parameter of concern in the studies carried out on monitoring drinking water resource quality.
Conclusion: This study reflects the research gaps and provides a basis for prioritizing water quality research in Iran. More actions and sound planning should be taken to monitor organic and inorganic pollutants. Chemical and microbial risk assessment, tracing the fate of pollutants and assessment of their ecological effects, investigations on advanced water purification processes, the use of bioremediation methods, identification of biological contaminant using biomarkers and molecular identification techniques are the most important research priorities that require more investigations.
Sm Soleimanpour, Sh Mesbah, B Hedayati,
Volume 11, Issue 1 (6-2018)
Abstract
Background and Objective: Determination of quality parameters of drinkable water is important, especially in developing countries, to increase the productivity and better management and planning of water resources. The aim of current study was to apply CART decision tree data mining technique to determine the most effective factors on drinkable water quality in Kazeroon plain, located west of Fars province, Iran.
Materials and Methods: Qualitative parameters of 60 drinkable wells such as SAR, Na, Cl, SO4, TH, TDS, pH, NO3, CaCO3, HCO3, Ca, Mg, K and EC were taken in the study area. The most effective factors on quality of drinkable water were determined with 90% accuracy, using CART decision tree data mining technique in Clementine 12.0 software.
Results: The results showed that total dissolved solids (TDS) and calcium content (Ca) had the highest impact on quality of drinking water. Therefore, when the TDS of water in this plain is equal or less than 495 mg/L and the calcium content is equal or less than 6.150 meq/L, the water is suitable for drinking.
Conclusion: The TDS and Ca content were the most effective parameters on the quality of drinkable water in this plain, due to its geological formation and the existence of CaCO3 in its structure. The water purification, reduction of soluble material concentration, and monitoring of wells in this plain are recommended.
M Gholamdokht Bandari, P Rezaee, Z Gholamdokht Bandari,
Volume 11, Issue 1 (6-2018)
Abstract
Background and Objective: Water quality assessment is an important step for optimal and proper use of water resources for drinking and selection of suitable and consistent water quality patterns. Therefore, the necessity of studying water quality characteristics in water resource management programs has been highly considered.
Materials and Methods: In this study, the hydrogeochemical quality of groundwater resources in the Siahoo region of Bandar Abbas was studied for drinking, agricultural and industrial purposes. Qualitative parameters of three wells, three springs, one juicy aqueduct and one surface water sample were used as input data. Water quality characteristics and charts were evaluated using Aq.qa and AquaChem software.
Results: Groundwater of the studied area was in the category of very hard water. According to the PIPER chart, the dominant hydrochemical facies were sulfatecolic and chloroformate species. According to the Willcox and Schuller qualitative index, groundwater for agricultural use was moderate and was acceptable for drinking water. In terms of the saturation index of islands, the existing water resources are corrosive to the sediment.
Conclusion: The data of this study indicate that one of the problems of the available water resources in Siahoo region is the high amount of salt and soluble materials, which show the effect of geological formations (evaporation, Chile, carbonates) and salt domes on the groundwater resources and reduction of the quality of water resources.
E Hoshyari, N Hassanzadeh, A Charkhestani,
Volume 12, Issue 1 (5-2019)
Abstract
Background and Objective: Nowadays linear alkyl benzene sulfanate (LAS) is widely used in the production of various detergents. The purpose of this study was to assess the health and ecological hazards of this pollutant on target organisms such as fish and daphnia in the Doroodzan Dam water.
Materials and Methods: According to the research objective and given existing restrictions, 21 water samples were collected in September 2018 from 7 selected stations based on the source of contamination in Doroodzan dam. Water quality parameters including pH, Dissolved Oxygen (DO), potential Redox (ORP), Total dissolve solid (TDS) and Electrical conductivity (EC) was measured at the site. The amount of linear alkyl benzenesulfonate (LAS) was measured using an optimized methylene blue method after transferring samples to the lab. Then ecological and health risk assessment was performed by calculating the RQ index (risk index).
Results: The results showed that the mean of pH, EC, TDS, salinity and DO were 8.88, 732.19 µs/cm, 482.49, 366.16 and 6.87 mg/L, respectively. The highest and lowest concentrations of LAS were 0.039 and 0.055 mg/L, respectively. The results also showed that there is a significant relationship between LAS concentration and pH. The results of the risk assessment showed that the health risk index in all stations is less than 0.1, while the ecological risk index except at station 7, are in low risk level.
Conclusion: In general, the results show that the RQ index in the Droodzan Dam water is in appropriate range and in the low risk level. Therefore, it is necessary to conduct long-term studies in this field to ensure the persistence of optimal water conditions in the dam ecologically and health-wise.
Narges Lasemi, Mahdi Hadi, Simin Nasseri,
Volume 13, Issue 4 (2-2021)
Abstract
Background and Objective: One of the most important factors affecting communities’ health is safe drinking water. The UN general assembly considers “ensure availability and sustainable water and sanitation for all “as one of the 17 goals of SDGs for the 2030 development agenda. Target 6.1 of SDGs aims to provide universal and equitable access to affordable drinking water and to provide safe drinking water for all households. Target 6.2 calls for an end to defecation in an open environment to ensure that each person has access to the toilet and safe disposal system. In current study, 143 Savadkooh villages with defects in water supply systems and health services were selected to update the indicators and implement sustainable development goals.
Materials and Methods: A checklist was designed to extract targets 6.1 and 6.2 based on the Joint Monitoring Program (JMP). Considering 7400 households, margin of error of 5%, confidence limit of 95%, and the most conservative mode for response distribution (50%), the sample size was determined (512 households). Samples were collected randomly from all villages and then analysis was performed by SPSS 19.
Results: In drinking water sector, 84% of people have access to safe services, while only 15% and 1% have access to basic services and unimproved services, respectively. In sanitation sector, 98.8% of people use safe services though only 0.2% utilize limited services. In hygiene sector, 98.8% of people are provided with safe services.
Conclusion: Lack of drinking water safety and failure to improve water resources’ quality are the main problems in the drinking water sector. Lack of access to sewage network, wastewater disposal in the land is the biggest health hazard in the region. This study can provide solutions to improve the health quality of affected community.
Mohammad Rezvani Ghalhari, Benyamin Ajami, Esfandiar Ghordouei Milan, Moein Khalooei, Amir Hossein Mahvi,
Volume 14, Issue 4 (3-2022)
Abstract
Background and Objective: Groundwater is the primary water source for drinking and agricultural activities in arid and semi-arid regions. Rainfall, land use, geological structure, aquifer mineralogy, and duration of water contact with the environment in the basement are the main factors affecting the chemical quality of groundwater. This study aimed to determine the physicochemical properties of groundwater by considering the water quality index (WQI) and its quality assessment for drinking water.
Materials and Methods: In this study, 71 wells of Kashan were sampled in summer 2020 with three samplings from each well, and physical and chemical parameters were studied, water quality index was determined using mathematical methods, and Pearson correlation coefficient was determined. Correlation analysis was used. Finally, the collected data were analyzed using SPSS-16 software, Excel 2013, and statistical tests.
Results: The calculated WQI of 71 wells in Kashan shows that 67% of the wells were of excellent quality, and 33% were of good quality in terms of water quality parameters. In total, out of 71 samples, the numerical index of water quality was 44.94, and the water was of excellent quality.
Conclusion: The results show that ions such as sodium, sulfate, and chlorine are directly related to the counting in an area and increase the concentrations of EC and TDS, and can impair the balance of anionic and cationic aqueous solution. It was also found that more than half of the wells have excellent quality due to using water wells for drinking.
Fatemeh Tabatabaei, Roya Mafigholami, Hamid Moghimi, Sanaz Khoramipour,
Volume 15, Issue 1 (4-2022)
Abstract
Background and Objective: Microplastics can have harmful effects on living things, including humans. These particles have been identified in all water, soil, and food sources. Among these, freshwater resources are more important, because they are considered a water source for humans through drinking water treatment plants (DWTPs). Therefore, this study investigates the performance of Tehran DWTPs in removing these particles.
Materials and Methods: In this study, the performance of three DWTPs in Tehran in removing these particles was investigated. In most studies worldwide, particles larger than 1 µm were examined, but in this study, nanoplastic particles smaller than 1 µm, as well as the effect of the warm and cold seasons of the year on the concentration of these particles were also examined.
Results: According to the results of the study, the amount of micro and nanoplastic particles at the inlet of treatment plants in the warm season of the year was 2569 ± 309 to 3918 ± 425 MP/L, and the output was 1492 ± 32 to 2279 ± 146 MP/L, which indicates an increase in these particles in the warm season. As a result, the studied treatment plants were only able to remove 32.1 to 59.9% of these particles. In addition, using electron microscopy, MPs were classified into three categories in terms of appearance: fiber, fragment, and film. This study completes the knowledge of MPs in this area.
Conclusion: Based on the results of this study, Tehran DWTPs have poor performance in removing these particles.
Hengameh Tarviji, Sakineh Shekoohiyan, Gholamreza Moussavi, Mohsen Heidari,
Volume 15, Issue 2 (8-2022)
Abstract
Background and Objective: In some villages of Mazandaran, drinking water may be polluted with various pollutants, especially heavy metals (HMs), due to the shallow depth of drinking water sources and the proximity of these sources to farmlands. Therefore, this study aimed to measure the HM pollution level of drinking water in some villages of Mazandaran province and to assess the attributed health risks.
Materials and Methods: HMs content of drinking water in 30 villages with separate water sources in Mazandaran province was measured. Concerning the HMs concentration and toxicity, and exposure route through water drinking, carcinogenic and non-carcinogenic risks were assessed using a Monte-Carlo simulation-based method.
Results: The concentration values of arsenic, cadmium, chromium, nickel and lead in water were <1/0-4.26, < 0.05, <0.15-3.74, <0.3-10.89, and <0.8-4.68 µg/L, respectively. The hazard index (HI) values for non-carcinogenic risk due to the exposure to HMs through drinking of water in various age groups ranged from 3.04E-04 to 9.94E-04. Values of cumulative excess lifetime cancer risk (ELCRT) for As and Cr were 9.72E-08 and 6.13E-08, respectively.
Conclusion: The results of this study showed that, fortunately, the concentration of metals in drinking water in the studied area was much lower than the national standards and the attributed health risk. Therefore, the drinking water sources in the studied villages had acceptable quality. However, due to the existence of rice paddies in some villages of Mazandaran province, continuous monitoring of pollution levels in the drinking water sources of these areas is essential.
