Iranian Journal of

---

Background and Objectives: Among the heavy metals cadmium is of considerable environmental and health significance because of its increasing mobilization and human toxicity. The objectives of this research were to synthesize SDS modified magnetite nanoparticles (Fe3O4) and to determine its efficiency in cadmium removal from aqueous solutions. Materials and Methods: Modified magnetite nanoparticles were synthesized and the effects of pH and contact time on cadmium removal efficiency were investigated in batch system. Then kinetics and isotherm models coefficients were determined in the optimum pH and equilibrium time conditions. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infra red (FTIR) were used to characterize the modified magnetite nanoparticles synthesized. Results: The SEM results showed that the diameter of the particles is 40-60 nm. It was found that the optimum pH value for maximum adsorption of 10 mg/L cadmium by 0.1 g adsorbent in 12 hr was 6. Kinetic study showed that the equilibrium time was 30 min. The adsorption kinetics fitted well using the Ho pseudo second-order kinetic model however, the adsorption isotherm could be described by the Freundlich model. The maximum adsorption capacity of modified magnetite nanoparticles for Cd2+ was found to be 9.604 mg/g. Conclusion: The results of this study indicated that the modified magnetite nanoparticles can be employed as an efficient adsorbent for the removal of cadmium from contaminated water sources

---

Background and Objectives: Cadmium can enter water resources through the industrial wastewater. It could cause intensivly damages to the liver and kidney of humans. Magnetic iron nanoparticles are used to control and eliminate heavy metals from industrial effluents through the mechanisms of adsorption, ion exchange and electrostatic forces. The aim of this study was to evaluate the efficiency of magnetic nanoparticles for adsorption of cadmium. Methods: The magnetite nanoparticles were prepared by co-precipitation method through the addition of bivalent and trivalent iron chloride under alkaline conditions. Characteristics of nanoparticles including particles structure, composition and size were determined using analytical devices such as XRD, SEM, and FT-IR. For optimization of adsorption process of cadmium, some parameters such as pH, contact time, initial concentration of cadmium, nanoparticles concentration, and temperature were studied under different conditions. Results: It was found that 95% of cadmium could be removedAt pH &ge 5.6, 10 mg/L initial cadmium concentration, a dose of 1 mg synthesized magnetite nanoparticles, 10 minutes contact time, and 200 rpm mixing rate at 25 °C. The isotherm of adsorption follows the Langmuir model (R2 < 0.995). Maximum capacity of cadmium adsorption was found to be 20.41 mg/g. Conclusion: Magnetite nanoparticles exhibit high capability for removal of cadmium. The nanoparticles synthesized could be used at industrial scale because of having the magnetic property, which make them easily recovered from aqueous solution through applying a magnetic field.