Showing 13 results for Municipal Solid Waste
Ms Hassanvand, R Nabizadeh, M Heidari,
Volume 1, Issue 1 (10-2008)
Abstract
Background and Objectives: In the recent years Municipal Solid Waste (MSW) has been one of the most important environmental concerns to throughout regions of Iran. Sound MSW management for any area needs to the reliable data in which present the actual MSW condition in that area. The aim of this study is express of integrated view of MSW in Iran.
Materials and Methods: In this study we collect the data from various municipal regions of Iran, to represent the roughly integrated view of MSW management situation in Iran. In this paper quantity, average generation rate, physical composition, and types of disposal methods in all of municipal regions of Iran also were investigated.
Results: Results from this study has shown that the amount of MSW generated in all of the municipal regions of Iran was 10370798 tons per year, and the average generation rate of MSW was 0.64 kg/capita/day. Results showed that only 6% of MSW was recycled, 10% was treated at organic waste (composting) plants, and about 84% was disposed of in landfill.
Conclusion: According to obtained results from this study and compare MSW composition of Iran to some countries, its found that MSW properties in Iran is near to MSW properties in Low-income countries. Since the most of MSW in Iran contain organic fraction, there is a high potential to develop of composting industry.
M.a Zazouli, A Mohseni Bandpei, A Eslami, A Sadeghi,
Volume 1, Issue 2 (3-2009)
Abstract
Background and Objectives: Recycling is one of the best alternatives in solid wastes management. Recycling has few benefits from the viewpoint of economics and environmental. Paper and cardboard are the valuable recyclable materials in solid wastes. The rate of paper recycling is 35% in world. The major production source of paper and cardboard wastes is private and governmental offices and organizations. To be informed about paper production is very important in the solid wastes recycling.Thus, the aim of this study was to determine production rate of paper and cardboard waste and also to determine paper recycling potential in the 20 head offices of Mazandaran province.
Materials and Methods: This study was conducted in the 20 head offices of at province center. The offices were selected by chance. This study was conducted four months in 2006. paper waste was separated after suspension of work. Collected material weighed on the sensitive scales. Separation and measuring was done for a week per month.
Results: The results showed that more than 2 tons of paper waste was produced in the twenty offices. The maximum and minimum of paper production was in education and recycling organization, respectively. The maximum and minimum of production rate was 2.08 and 0.192 kg per capita in month that was in the education and Jihad-e-Agriculture organization, respectively. Also the maximum and minimum of paper waste was produced at first work day of week (Saturday) and last work day of week (Thursday), respectively. However, it was not significantly (P >0.05). Paperrecycling operation and marketing was done in an office.
Conclusion: Findings of this study indicated that office solid waste management needs more notice in Iran. And also calculations showed that paper recycling is economical.
M Farzadkia, S Salehi, A Aameri, A Joneidy Jafari, R Nabizadeh,
Volume 2, Issue 3 (11-2009)
Abstract
Backgrounds and Objectives: Over than 70% of solid wastes is consisted of food wastes with high putrecibility in Iran. Due to this regard, construction of composting factories for sanitary disposal or fertilizer production from solid wastes was very appreciated in our country. The objective of this research was to study on the quality and comparing of the compost produced by Khomain and Tehran compost factories.
Materials and Methods: This study was accomplished on the compost produce from Khomain and Tehran compost factories about 9 months. For investigation of chemical qualities of these materials, some indexes such as percentage of organic materials, carbon, nitrogen, phosphorus, potash and heavy metals consists of lead, cadmium, mercury and chromium were measured. Microbial quality of these compost materials were defined by assessing of the amounts of coliforms bacteria, salmonella bacteria and parasites ova.
Results: The average amounts of some indexes in compost of Khomain and Tehran were been: organic materials % (37.77, 29.80), carbon %( 22.14, 18.12), nitrogen% (2.08, 1.6), lead (229.6, 59.44 ppm), and chromium (70.2, 19.75), respectively. The microbial quality of these compost samples were agreement with class B of USEPA guidelines.
Conclusion: This study showed that quality of organic materials percent in Tehran's samples was better than Khomain's samples, but these indexes on these samples were lower than the grade No.2 of compost. The percentage of carbon, nitrogen and potash in these samples were desirable but, phosphorus amount were not in sufficient. The heavy metals especially lead and chromium in Tehran's samples were higher than Khomain's samples, but these samples were usually in agreement with guidelines of compost. Due to the defined microbial qualities, these samples could be used as well as amendment agents for poor soil.
Marzieh Mahtabi Oghani, Akbar Najafi , Habiballah Yunesi,
Volume 6, Issue 3 (12-2013)
Abstract
Background and objectives: Nowadays, landfilling is most common method in many countries owing to lower cost and adaptation to wide range of solid waste. Site selection of landfill requires evaluating several parameters such as municipal government requirements, environmental regulations and a large number of quantitative and qualitative criteria. The aim of current study was to compare AHP and TOPSIS in landfill site selection. For this purpose, two mentioned methods were applied to select suitable site in Karaj. Materials and methods: In present study, 4 candidate sites in south of Karaj were selected for landfill by overlaying data layers (digital maps) and query functions in Arc GIS 9.2. Prioritizations between alternatives were conducted by AHP and TOPSIS technique according to the criteria mentioned. Eventually, we compared and evaluated the AHP results and TOPSIS results with each other. Result: According to AHP, site prioritization was 3,2,4,1 respectively whereas, in the case of TOPSIS, it was ranked 4,3,2,1, respectively. These results showed that both methods are suitable to determine site priority. Conclusion: As in AHP, alternatives are compared with respect to goal and criteria, consequently it has better precision and higher accuracy and confidence compared with TOPSIS.
M Hatami Manesh, M Mirzaei, M Gholamali Fard, A.r Riyahi Bakhtiyari, M Sadeghi,
Volume 8, Issue 1 (8-2015)
Abstract
Background and Objectives: one of the most important environmental concerns is heavy metals emissions from human activities to natural ecosystems, particularly transfer to soil. The aims of this study were measured the concentrations of Cu, Zn and Cr in landfill soil and hospital waste ash of Shahrekord municipal solid waste landfill. Materials and Methods: Soil samples were collected from three sites: out of the landfill, municipal landfill and hospital landfill. In each site 2, 1, and 1 stations ware selected respectively and each sample was replicated in three times. Results: We found that there was a significant difference between concentrations of Cu, Zn and Cr in the landfills soil (95% confidence, P <0.05). Furthermore, the highest levels of Zn and Cu were detected in the hospital landfill and also for Cr in the municipal landfills. However, the concentration levels of heavy metals in all of the sites were in order as follows: Zn>Cu>Cr. Conclusion: High concentrations of metals determined in the present study represents the high application of these metals in the structure of municipal and hospital solid wastes and also their inaccurate separation. Thus, awareness about physical and chemical characteristics of municipal and hospital wastes and also the landfill soil is necessary for evaluating their effects on the soil quality and surrounding environments.
M Ahmadi-Pirlou, M Ebrahimi-Nik, M Khojastehpour, Sh Ebrahimi,
Volume 9, Issue 4 (3-2017)
Abstract
Background and Objective: Solid waste management has always been one of the major challenges of large cities. Conversion of waste to energy in the form of biogas is known to be an appropriate solution. The aim of this study was to investigate the effect of total solids (TS) content and alkaline pretreatment on biogas production from municipal solid waste (MSW).
Materials and Methods: Experiments were done in 1 L glass bottles at 37 °C with different TS contents (5, 10, and 15%), each in 3 replications based on a completely randomized design. Comparison of means was used for interpretations of the result. The volume of the produced biogas, the amount of methane, and changes in pH were measured on a daily basis. In order for better mixing, the digesters were manually shaken for 30 seconds every day. TS, volatile solids (VS), carbon and nitrogen of the feedstock were determined according to APHA standard methods.
Results: The highest methane yield and VS reduction was observed in 5% TS. Therefore, this TS was chosen for alkaline pre-treatment. The results showed that pre-treatment with NaOH significantly improved biodegradability of MSW. In 25 days, the production of biogas was 30.38% higher than that of the untreated digester. The highest methane yield was 83.35 mL/g TS and 132 mL/g TS from the control and the pretreated digesters, respectively.
Conclusion: The results of the lab experiments showed that the TS of 5 % and the alkaline pre-treatment, significantly improved biodegradability of MSW and consequently increased biogas and methane yield.
Ma Ebrahimi-Nik, S Ghanbari Azad Pashaki, M Khojastehpour, A Rohani,
Volume 11, Issue 2 (9-2018)
Abstract
Background and Objective: In recent years, management and disposal of municipal solid waste has become a global problem and the most important environmental concern. Anaerobic digestion is a cost-effective solution for treatment of both solid waste and wastewater. The aim of this study was to investigate the positive or negative effects of calcium chloride content in anaerobic digestion process of municipal solid waste and leachate on biogas production.
Materials and Methods: Experiments with 8 levels of calcium chloride on co-digestion of municipal solid waste and leachate were investigated in 500 ml digesters under mesophilic conditions in a completely randomized design with three replications. Reactors with a ratio of substrate to inoculum of 2 (on VS basis) were operated and the volume of the biogas was measured daily. Volatile and total solids, carbon/nitrogen of waste, COD, BOD and heavy metals were measured by following APHA.
Results: The results of the experiment showed that the pH was decreased with increasing calcium chloride concentration. The highest amount of cumulative biogas production was obtained in CaCl2 of 2 g/L with the highest VS and TS reduction. Higher concentrations of CaCl2 (≥3 g/L) caused a reduction in the degradability of volatile and total solids and, as a result, a decreased performance of the digester.
Conclusion: The results clearly confirmed that the addition of calcium chloride was an effective solution to improve biodegradability in co-digestion of the MSW and leachate and consequently to reduce the total and volatile solids and to increase the amount of biogas.
Kh Faraji Mahyari, Sh Rafiee, Ar Keyhani, Z Faraji Mahyari,
Volume 12, Issue 3 (12-2019)
Abstract
Background and Objective: Knowledge about the quantity of municipal solid waste (MSW) generation plays a key role in formulating policies of waste management. So far, different methods have been applied to estimate the quantity of waste generation. In this study, eight specific forms of mathematical functions were evaluated to predict waste generation by the regression analysis method based on population.
Materials and Methods: The significance test of each model and the existence necessity of predictor parameters were performed using the F- and t-statistic, respectively. The statistical indicators of determination coefficient ( ), adjusted determination coefficient ( ), root mean square error (RMSE), mean bias error (MBE) and mean percentage error (MPE) were used for model’s goodness of fit. The predicted determination coefficient ( ) was calculated to assess the predictive ability of models by method of Leave-one-out cross validation.
Results: The results showed that polynomial models of second order and more are not significant (at 0.01 level) despite good accuracy and are not suitable for long-term prediction. Linear, power and exponential models are best with equal to 0.942, 0.932 and 0.936 and equal to 0.904, 0.893 and 0.898 respectively. However, the uncertainty was greater in the exponential model.
Conclusion: The status of waste generation was investigated in four scenarios based on growth rate of population (increasing, fixing and decreasing births) at Tehran metropolis in 2021-2051. In all scenarios, annual generation and per capita of waste are increased to 2051. The daily waste generation will increase to 12317 ton in 2051.
Ali Daryabeigi Zand, Maryam Rabiee Abyaneh,
Volume 14, Issue 1 (5-2021)
Abstract
Background and Objective: Due to the increasing trend of municipal solid waste (MSW) production, if a suitable management system is not applied, it will lead to environmental pollution and endanger human health. The aim of this study was to compare different scenarios of waste management in Chalous city with life cycle assessment (LCA) approach and to select the most efficient method in terms of environmental adaptation.
Materials and Methods: After investigation of the quantitative and qualitative characterization of the produced wastes and the current waste disposal method in Chalous city, the obtained results were used to evaluate the life cycle of six different waste management scenarios; including the combination of four methods of composting, recycling, incineration along with energy extraction and sanitary landfilling. Emissions from various scenarios were assessed using IWM-2 model.
Results: The current system of municipal waste management in Chalus (scenario 1) with ecological index of 1.73+06 poses the highest pollution load into the environment. The inclusion of compost disposal methods in the organic waste sector and recycling of biodegradable materials significantly reduces the emissions of environmental pollutants by increasing the amount of materials for recycling and reuse, as well as preventing emissions from raw material production. The fifth scenario (60% compost, 30% recycling and 10% sanitary landfill) with ecological index of -2.00+05 was known as the lowest contamination scenario.
Conclusion: Considering that a high percentage of Chalous municipal solid waste composition is perishable materials (organic waste), simultaneous application of composting and recycling methods can be a suitable option for optimal management of wastes in Chalous city and play an important role in reducing the environmental pollution load.
Zeinab Mousania, Seyed Hassan Mousavi, Farzane Mirza Bayati, Reza Rafiee,
Volume 14, Issue 3 (12-2021)
Abstract
Background and Objective: Various aspects including the environmental burdens, social and economic consequences of the waste management(WM) scenarios must be considered to come up with a comprehensive WM plan. Life Cycle Assessment (LCA) approach is a systematic method to quantify the environmental burdens of each WM scenario.
Materials and Methods: This study used an LCA approach to develop a decision support system to analyze different scenarios of WM. Local and global databases were used to develop a comprehensive life cycle inventory database. The model comes with a graphical user interface in Persian to make it easier to use by a wide range of customers. Finally, to evaluate the model, three scenarios were assessed in Karaj city, Iran.
Results: To the best of our knowledge, this model is the first attempt to automate the process of waste management scenarios evaluation in Iran. The model enables users to easily and quickly simulate a wide range of scenarios. All calculations will be carried out by the software in the background and the user only needs to determine his/her scenario of concern which is very easy owing to the user-friend GUI of the software. The model was evaluated by analyzing the current WM in Karaj. The results showed that the waste collection system is the main source of environmental pollution of the WM in Karaj city due to the inefficient system of the waste collection and poor fleet fuel efficiency.
Conclusion: This tool allows users to gather detailed information about the waste management systems. In this way, the user can make informed decisions about the most suitable waste management scenario in a city.
Pantea Omrani,
Volume 14, Issue 4 (3-2022)
Abstract
Background and Objective: Nowadays, in metropolitan areas, principled and hygienic waste management is very important. Recycling is one of the most appropriate options in waste management. Hereof, the present study was aimed to investigate the possibility of using textile waste fibers in the manufacture of Medium Density Fiberboard (MDF).
Materials and Methods: This experimental study was performed on lab-scale. Fabric waste was prepared by separation method at source from a clothing manufacturer in Tehran and converted into fibers. Test boards were made with weight percentage of mixing textile waste fibers to industrial fibers at three levels of 0:100, 10:90 and 15:85, respectively, 10% urea-formaldehyde adhesive, with 16 mm thickness and 0.7 g/cm3 density by hot press. Then, properties of the boards were measured including bending strength, modulus of elasticity, internal bond, hardness, water absorption and thickness swelling. The results were analyzed with ANOVA test.
Results: The results of ANOVA showed that the effect of textile waste fibers on the bending strength, modulus of elasticity and swelling thickness of 2 and 24 hours of boards made at 5% probability level was significant. Additionally, the highest values of physical and mechanical properties are related to made boards with 10% of textile waste fibers.
Conclusion: The results showed that it is possible to make MDF with textile waste fibers. The use of wastes such as fabrics in the production of new functional products can be considered as one of the strategies to reduce waste and thus to maintain human health and the environment.
Sepideh Sadeghi, Farzaneh Mohammadi, Amir Hossein Nafez, Sahar Gholipour, Mahnaz Nikaeen,
Volume 16, Issue 2 (9-2023)
Abstract
Background and Objective: The presence of pathogenic microorganisms in compost of solid waste can threat public health. Therefore, it is necessary to evaluate the safety of produced composts before its land application as a soil conditioner. This study was conducted to investigate the presence of pathogenic microorganisms in municipal solid waste (MSW) compost and health risks associated with accidental ingestion of compost by children.
Materials and Methods: In this study, sampling was done from compost piles at different public parks of Isfahan city during the period of compost spreading. Presence and concentration of pathogenic microorganisms including salmonella, campylobacter, cryptosporidium and adenovirus were investigated by culture or real-time PCR methods.
Results: All pathogenic microorganisms were detected in MSW compost in a frequency from 11%-62% with the highest frequency for detection of adenovirus. The health risk assessment showed that the highest risk of daily infection was for Cryptosporidium (7.67 × 10-4 pppy) and the lowest risk was related to adenovirus (8.27 × 10-10 pppy). The annual infection risk from gastrointestinal disease was calculated above guideline infection risk (10-3 pppy).
Conclusion: The results showed contamination of produced compost to pathogenic microorganisms and potential health risks from applying MSW compost in urban green spaces. Therefore, the relevant organizations should pay more attention to the composting process and its microbial quality and application in public access areas.
Sadegh Hosseinniaee, Mohammad Jafary, Ali Tavili, Salman Zare,
Volume 16, Issue 4 (3-2024)
Abstract
Background and Objective: The toxicity of heavy metals is one of the most important environmental issues in the current century. This research aimed to investigate the effect of municipal solid waste compost on the absorption of nutrients and lead and zinc metals in M. cuneatum and V. speciosum plants.
Materials and Methods: In a greenhouse experiment, compost at four levels (0, 1, 3 and 5% w/w) was completely mixed with natural soil contaminated with heavy metals (Pb and Zn). After six months of harvesting the plants, the shoot and root biomass was determined. Also, the concentration of macronutrients and micronutrients, Pb and Zn in the roots and aerial parts of plants and available Pb and Zn in the soil were measured using the ICP-OES. In order to investigate the correlation between the measured plant and soil parameters, principal component analysis (PCA) was performed
Results: Compost significantly improved the shoot dry weight of M. cuneatum and V. speciosum by 13 and 19%, respectively. 5% compost significantly reduced shoot lead by 64 and 34.4% in M. cuneatum and V. speciosum, respectively, compared to the control. Compost was more effective in increasing potassium, phosphorus, copper, and nickel than magnesium, manganese, and calcium, and increased shoot potassium by 22 and 32%, respectively, in M. cuneatum and V. speciosum compared to the control; this increase was 30 and 14% for copper and 19 and 21% for phosphorus, respectively. PCA analysis showed that, among the investigated elements, potassium, phosphorus and copper were most affected by composting and had the maximum role in improving plant growth and reducing lead toxicity.
Conclusion: Municipal solid waste compost improved the growth of M. cuneatum and V. speciosum and reduced phytotoxicity by immobilizing lead in the soil.
