Volume 16, Issue 2 (8 2003)
jdm 2003, 16(2): 11-17 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ebadian B, Bazargan Zadeh M. Comparison of dimensional changes of two cold- cured acrylic resins: Acropars and Meliodent. jdm 2003; 16 (2) :11-17
URL: http://jdm.tums.ac.ir/article-1-413-en.html
URL: http://jdm.tums.ac.ir/article-1-413-en.html
Abstract: (6204 Views)
Statement of Problem: The construction of dental materials has been developing inside the country.Cold- cured acrylic resins are of such materials which are used in removable prostheses.
Purpose: The aim of this study was to compare the dimensional changes of two types of cold-cured acrylic resins, Acropars and Meliodent.
Material and Methods: Forty acrylic discs, with diameter of 13.7 mm, were made of Acropars and Meliodent acrylic resins (20 samples in each group). Then, each group was randomly divided into two parts. The first group was kept in usual environment, whereas the samples of the second group were placed in the boiling water for five minutes. The dimensional changes of the samples, at different intervals and seven days post curing, were measured by light microscope and recorded. Variance analysis was used to analyze the results.
Results: Acropars resins, comparing to Meliodent ones, showed a considerable dimensional changes,which was statistically significant. Boiling of Acropars resins, for five minutes, lead to a significant shrinkage. The maximum shrinkage occured at 24 hours post curing.
Conclusion: If the tray is made of Acropars acrylic resin, it is recommended to take impression, 24 hours
after its setting.
Purpose: The aim of this study was to compare the dimensional changes of two types of cold-cured acrylic resins, Acropars and Meliodent.
Material and Methods: Forty acrylic discs, with diameter of 13.7 mm, were made of Acropars and Meliodent acrylic resins (20 samples in each group). Then, each group was randomly divided into two parts. The first group was kept in usual environment, whereas the samples of the second group were placed in the boiling water for five minutes. The dimensional changes of the samples, at different intervals and seven days post curing, were measured by light microscope and recorded. Variance analysis was used to analyze the results.
Results: Acropars resins, comparing to Meliodent ones, showed a considerable dimensional changes,which was statistically significant. Boiling of Acropars resins, for five minutes, lead to a significant shrinkage. The maximum shrinkage occured at 24 hours post curing.
Conclusion: If the tray is made of Acropars acrylic resin, it is recommended to take impression, 24 hours
after its setting.
Keywords: Cold- cured acrylic resin
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
