Volume 31, Issue 4 (1-2019)
jdm 2019, 31(4): 232-238 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Koulivand S, Siadat H, Ghodsi S, Alikhasi M. Comparative evaluation of different surfaces fit of digitally fabricated cobalt-chromium copings in two depth of finish lines. jdm 2019; 31 (4) :232-238
URL: http://jdm.tums.ac.ir/article-1-5834-en.html
URL: http://jdm.tums.ac.ir/article-1-5834-en.html
1- Assistant Professor, Department of Prosthodontics, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran, Iran
2- Professor, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
3- Associate Professor, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
2- Professor, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
3- Associate Professor, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
Abstract: (3434 Views)
Background and Aims: Despite the increasing application of intra-oral scanners, the effect of finish line position on gingival margins adaptation is still discussed. The purpose of this clinical study was to evaluate the fitness of cobalt-chromium copings obtained from intraoral scanning in two depth of finish lines.
Materials and Methods: Thirty teeth prepared for single premolar metal-ceramic crowns were included. Fifteen teeth had supragingival and fifteen had sub-gingival finish lines. Digital impressions were made using an intraoral scanner (Trios-3shape). Computer-aided design and computer-aided manufacture (CAD/CAM) cobalt-chromium copings were fabricated from the scan files. The copings were evaluated intraorally and after adjustments, the internal and marginal discrepancy were measured using silicone replicas and a stereomicroscopy. Internal and marginal discrepancies were analyzed using the Multivariate test (P<0.05).
Results: The mean internal and marginal gap were 52.1 and 56.27μ, for supragingival group and 49.72 and 62.98μ for subgingival group, respectively. The evaluation of finish line position showed no significant effect on obtained results (P>0.05).
Conclusion: CAD/CAM chrome-cobalt copings fabricated by digital impressions provided acceptable marginal and internal precision. However, the finish line position had no significant effect on the internal and marginal adaptation.
Materials and Methods: Thirty teeth prepared for single premolar metal-ceramic crowns were included. Fifteen teeth had supragingival and fifteen had sub-gingival finish lines. Digital impressions were made using an intraoral scanner (Trios-3shape). Computer-aided design and computer-aided manufacture (CAD/CAM) cobalt-chromium copings were fabricated from the scan files. The copings were evaluated intraorally and after adjustments, the internal and marginal discrepancy were measured using silicone replicas and a stereomicroscopy. Internal and marginal discrepancies were analyzed using the Multivariate test (P<0.05).
Results: The mean internal and marginal gap were 52.1 and 56.27μ, for supragingival group and 49.72 and 62.98μ for subgingival group, respectively. The evaluation of finish line position showed no significant effect on obtained results (P>0.05).
Conclusion: CAD/CAM chrome-cobalt copings fabricated by digital impressions provided acceptable marginal and internal precision. However, the finish line position had no significant effect on the internal and marginal adaptation.
Type of Study: Research |
Subject:
general
Received: 2019/03/12 | Accepted: 2019/03/12 | Published: 2019/03/12
Received: 2019/03/12 | Accepted: 2019/03/12 | Published: 2019/03/12
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
