Volume 32, Issue 4 (1-2020)
jdm 2020, 32(4): 216-221 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Jannati P, Saravi M E, Bamdadian T, Sobouti F, Cheperli S, Charati J Y, et al . Comparison between deep chamfer and 135 ̊ tooth preparation designs on marginal fit and marginal gap in posterior metal-ceramic crowns. jdm 2020; 32 (4) :216-221
URL: http://jdm.tums.ac.ir/article-1-5951-en.html
URL: http://jdm.tums.ac.ir/article-1-5951-en.html
Pooya Jannati1 
, Mohammad Ebrahimi Saravi2 , Tahmineh Bamdadian2 , Farhad Sobouti3 , Sahar Cheperli4 , Jamshid Yazdani Charati5 , Nasrin Khaki6 , Sahba Amini * 7, Abbas Mesgarani8
, Mohammad Ebrahimi Saravi2 , Tahmineh Bamdadian2 , Farhad Sobouti3 , Sahar Cheperli4 , Jamshid Yazdani Charati5 , Nasrin Khaki6 , Sahba Amini * 7, Abbas Mesgarani8
1- Post-Graduate Student, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
2- Assistant Professor, Department of Prosthodontics, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
3- Assistant Professor, Department of Orthodontics, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
4- Post-Graduate Student, Department of Periodontology, School of Dentistry, Babol University of Medical Sciences, Babol, Iran
5- Associate Professor, Department of Biostatistic, Health Sciences Research Center, Faculty of Health, Mazandaran University of Medical Sciences, Sari, Iran
6- Ph.D. in TEFL, Administration of education, Sari, Iran
7- Dental Student, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
8- Assistant Professor, Department of Endodontics, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
2- Assistant Professor, Department of Prosthodontics, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
3- Assistant Professor, Department of Orthodontics, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
4- Post-Graduate Student, Department of Periodontology, School of Dentistry, Babol University of Medical Sciences, Babol, Iran
5- Associate Professor, Department of Biostatistic, Health Sciences Research Center, Faculty of Health, Mazandaran University of Medical Sciences, Sari, Iran
6- Ph.D. in TEFL, Administration of education, Sari, Iran
7- Dental Student, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
8- Assistant Professor, Department of Endodontics, School of Dentistry, Mazandaran University of Medical Sciences, Sari, Iran
Abstract: (3118 Views)
Background and Aims: One of the most important challenges for dentists is providing a crown with appropriate marginal fit and gap. The 135-degree tooth preparation found to have some advantages such as technical ease and appropriate finish line record. Despite the advantages of 135-degree tooth preparation, scant research has been done in this area. Therefore, the aim of this study was to compare 135-degree and deep chamfer tooth preparation on the marginal fit and marginal gap of posterior metal-ceramic crowns.
Materials and Methods: Deep chamfer and 135-degree tooth preparation were performed on the two first mandibular molars with healthy coronal tissue and similar size. Impression was taken from each tooth and 30 crowns were made on each die. The sample plastered with fit checkers were pressed under the force of 40 N for 3 min in a universal testing machine. They were measured and recorded under a loop with 40x power in three points on each aspect. Data were analyzed by Wilcoxon and Kolmogorov-Smirnov tests using SPSS version 24.
Results: The mean marginal fit values in deep chamfer and 135-degree were 48.5417µm and 55.3333 µm, respectively with no statistically significant difference (P>0.05). While the mean marginal gap in deep chamfer (2.4833 µm) was significantly higher (P<0.05) than 135-degree (1.0083).
Conclusion: It can be concluded that the marginal gap by 135-degree’s tooth preparation was lower than that of deep chamfer in metal-ceramic crowns. However, no significant difference in the marginal fit between the deep chamfer and 135-degree tooth preparation was found.
Materials and Methods: Deep chamfer and 135-degree tooth preparation were performed on the two first mandibular molars with healthy coronal tissue and similar size. Impression was taken from each tooth and 30 crowns were made on each die. The sample plastered with fit checkers were pressed under the force of 40 N for 3 min in a universal testing machine. They were measured and recorded under a loop with 40x power in three points on each aspect. Data were analyzed by Wilcoxon and Kolmogorov-Smirnov tests using SPSS version 24.
Results: The mean marginal fit values in deep chamfer and 135-degree were 48.5417µm and 55.3333 µm, respectively with no statistically significant difference (P>0.05). While the mean marginal gap in deep chamfer (2.4833 µm) was significantly higher (P<0.05) than 135-degree (1.0083).
Conclusion: It can be concluded that the marginal gap by 135-degree’s tooth preparation was lower than that of deep chamfer in metal-ceramic crowns. However, no significant difference in the marginal fit between the deep chamfer and 135-degree tooth preparation was found.
Keywords: Tooth preparation, Metal ceramic restorations, Dental marginal adaptation, Dental ceramic alloys
Type of Study: Research |
Subject:
general
Received: 2020/05/2 | Accepted: 2020/05/2 | Published: 2020/05/2
Received: 2020/05/2 | Accepted: 2020/05/2 | Published: 2020/05/2
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
