Showing 7 results for Farid
H. Dorriz, F. Farid, D. Seidi,
Volume 23, Issue 4 (20 2011)
Abstract
Background and Aims: Association between patient satisfaction and success of the treatment determines the quality of health care. Measuring the level of satisfaction is an important factor for improving the quality of services provided by a system, so it is necessary to determine the expectations of patients. The aim of this study was to evaluate the patient satisfaction from services provided by the dental faculty of Tehran University of Medical Sciences.
Materials and Methods: In this descriptive and cross-sectional study, 385 patients were randomly selected from different departments of dental faculty including prosthodontics, endodontics, periodontics, operative dentistry, radiology and oral medicine. A two-part questionnaire including demographic characteristics of patients and satisfaction from reception process, infection control, student and personnel behavior, and the outcome of treatment was filled out by patients. Data were analyzed using SPSS software.
Results: The most dissatisfying factor was the time wasted in paying the cost and the most satisfying factor was student behavior. General satisfaction form the process was evaluated (complete satisfaction 51.9%, partial satisfaction 38.4% and dissatisfaction 9.6%), and 62.9% of patients were completely agree with introducing dental faculty to others.
Conclusion: The most satisfying item was student behavior which indicates that this factor is of great importance in increasing the quality of treatment. The deficiencies determined by patient can provide reliable data for determination and regulation of health care policies.
Hamid Jalali, Farzaneh Farid, Abdolsalam Abobakry, Maryam Mohajerfar,
Volume 25, Issue 2 (9 2012)
Abstract
Background and Aims: The purpose of this study was to design a new device assisting dental students to measure the tapering of the prepared teeth for fixed crown prosthesis in which the desired tapering for better clinical prognosis could be obtained.
Materials and Methods: The designed device in this study had two arms that were placed on two opposite walls of the prepared teeth. To evaluate the validity and reliability of this device, 3 dies with different degrees (13, 29 and 45°) were used and 20 teeth were prepared by dental students with undefined tapering degrees. The measurements of tapering were performed by six last year-dental students in two different time periods. Comparison of errors in measurements on standard dies between observers and between time intervals were analyzed by (Wilcoxon) Paired t-test with a significance level of α=0.05.
Results: For the three dies used in this study, we compared the differences for each measurement taken by observers with the standard taper of the dies. Maximum difference of measurements with true standard die tapering was 1 degree. A number of 6 measurements were under the true standard tapers and 2 measurements were above it. Interclass Correlation Coefficients (ICC) of the first and second measurements on prepared teeth were 97.4 and 97.5, respectively. There were no significant differences between different observers or two measurements of the same observer in different time intervals (P>0.05).
Conclusion: The results indicated that this device can be valid and reliable for measuring the angle of convergence of the prepared teeth and can be used as an educational device in dental schools as a replacement for previous tapering measurement methods.
Haghgoo Roza , Haghgou Hamid Reza , Abbasi Farid , Tavakkoli Mohammad ,
Volume 27, Issue 4 (1-2015)
Abstract
Background and Aims: The main cause of erosion is acid exposure . Side effects of erosion necessitate therapeutic agents’ uses. The aim of this study was to investigate the effects of nano- hydroxy apatite in tooth remineralization following exposure to soft beer.
Materials and Methods: This in vitro experimental study was conducted on 18 human impacted third molars that had been surgically extracted. The microhardness of specimens was measured. Then teeth were exposed to soft beer and their secondary microhardness was measured. The teeth were divided into 2 groups (water and nano-hydroxy apatite solution) and were placed on 9 orthodontics appliances and delivered to 9 volunteers. These volunteers placed the tooth on one side in water for 5 minutes and the tooth in opposite side in nano-hydroxyapatite solution. This application was repeated 6 times a day for 10 days. The microhardness of teeth was measured again. Data were analyzed using Paired T-test.
Results: The tooth enamel microhardness reduced after exposure to soft beer significantly (P=0.04). The microhardness of 9 teeth after being in water showed significant changes (P=0.012). The microhardness of 9 teeth significantly changed after exposure to nano -hydroxyapatite solution (P=0.001) .
Conclusion: Based on the results of this study, 10% solution of nano- hydroxy appatite could restore the erosive lesions .
Motlagh Mehdi Ghandehari , Pourhashemi Seyyed Jalal , Ghadimi Sara , Baghae Farideh ,
Volume 27, Issue 4 (1-2015)
Abstract
Background and Aims: Dental environment is a stressful place for children. In many cases, parents transmit their anxiety to their children in the first dental visit. Mothers as the closest person to the children may have important influence on their children’s behavior in dentistry. The purpose of this study was to evaluate the effectiveness of an educational pamphlet for mothers on children’s behavior in the first dental visit.
Materials and Methods: This study was conducted on 238 mothers who had 3-7 years old children undergoing dental treatment for the first time. The participants were divided into interventional and control group randomly. Behavior of children was assessed by questionnaire according to 4 point scale of Frankle. The questionnaire contained 5 parts: separation of child from the mother, entering the dental room, opening the mouth, communicating with dentist, getting the prize. Data were analyzed using Chi-square test.
Results: The educational pamphlet was effective on the separation of child from the mother, the cooperation of children in interventional group was better than the control group (P=0.006). In interventional group 96.2% of and in the control group 90.8% of children had good and very good behavior but the difference was not significant (P=0.11).
Conclusion: Although the educational pamphlet was effective on the separation of child from mother. No significant difference in behavior of 3-7 year-old children between interventional and control group was found.
Farzaneh Farid, Pedram Etemadi, Farhad Shafiee,
Volume 30, Issue 2 (8-2017)
Abstract
Background and Aims: Increase of esthetic demands among dental patients has led to development and wide spread use of tooth colored ceramic systems for fabricating fixed restorations. However, they do not have same capability of matching the target color. The aim of this study was to compare the color coordinates of three widely used systems with A2 tab from a Vita Lumin Classic shade guide.
Materials and Methods: In this study, three ceramic systems were tested. The metal-ceramic(MCR) with 0.5 mm core and 1 mm Ceramco lll veneering layer; the all ceramic (CE) with 0.5 mm Cercon core and 1 mm Cercon Ceram veneering layer, and the all porcelain (VM7) with 1.5 mm Vita VM7. For each system, 15 disks (1.5mm×10mm) were made in Vita A2 shade. L*a*b* coordinates of the samples were measured by spectrophotometer and the color difference with Vita A2 shade was calculated. The data were analyzed using one way ANOVA and multiple Tukey tests.
Results: The color coordinates of the target shade was L*=72.45, a=1.59 and b*=14.11. The mean L*a*b* values for MCR were 72.61±0.38, 2.88±0.24, 15.51±0.64, for CE were 76.42±0.46, 2.77±0.14, 17.51±0.61, and for VM7 were 75.13±0.6, 2.15±0.19, 17.9±0.61, respectively. The difference between coordinates of each system with target shade was significant. Only for MCR group, ΔE was in acceptable range (1.98). For CE (Δ=5.38) and VM7 (Δ=4.72) groups, the difference was unacceptable.
Conclusion: Under the condition of this study, the metal-ceramic system had the best and acceptable match to the target shade.
Ladan Ranjbar Omrani, Masumeh Hasani Tabatabaei, Soma Faridi, Elham Ahmad,
Volume 30, Issue 3 (10-2017)
Abstract
Background and Aims: The aim of this study was to evaluate the effects of two fluoride containing mouth rinses on the color stability of two different resin composites.
Materials and Methods: 27 specimens (2×4×5 mm) were prepared from each of the following materials: a micro filled composite (Gradia, GC) and nanohybrid (Grandio). The specimens were polished by Soflex fine and superfine disks and then incubated in artificial saliva at 37°C for 24 h. The baseline color values (L, a, b) of each specimen were measured using an Easyshade spectrophotometer according to the CIELab color scale. The specimens were immersed in 20 mL of each mouth rinse and stored in an incubator at 37°C for 12 h. After incubation, the color values of all specimens were measured again, and the color change value (ΔE) was calculated. Data were analyzed by a 2-way analysis of variance at a significance level of 0.05.
Results: None of the mouth rinses created clinical significant color changes in the samples. There was no statistically significant difference among color susceptibility between resin composites (P=0.330). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>0.05).
Conclusion: Accordance to the results of this study, the fluoride containing mouth rinses does not create color change in resin composites.
Fereshteh Naser Alavi, Ashkan Salari, Seyedeh-Maryam Tavangar, Reza Tayefeh Davalloo, Farideh Darabi, Zahra Farzi,
Volume 36, Issue 0 (5-2023)
Abstract
Background and Aims: The white color of teeth is one of the most essential factors in smile esthetics. Therefore, various whitening agents such as bleaching mouthwashes have been produced in response to the people’s high demand for having whiter teeth. The present study evaluated the efficacy of three whitening mouthwash products on tooth enamel whiteness.
Materials and Methods: In the present in vitro study, 32 bovine incisors were assigned to four groups in terms of the mouthwash used (n=8): control (C); Xenon Smart White (ZSW), containing pyrophosphate and triphosphate; Signal White Now (SWN), containing Blue Covarine; and Pasta Del Capitano whitening mouthrinse (PCW), containing Plasdone. Colorimetry was carried out using a spectrophotometer at the baseline and 2, 4, 8, and 12 weeks after treatment with mouthwashes. Data were analyzed using CIELab parameters with ANOVA, RM two-way ANOVA, and post hoc Tukey tests (α=0.05).
Results: The results showed that the whiteness created by the SWN mouthwash was clinically visible (ΔE>3.3). However, the functions of all the mouthwashes were statistically similar with no significant differences from the control group (P>0.05).
Conclusion: Although, Blue Covarine-containing mouthwash was somewhat effective in whitening of tooth enamel, none of the mouthwashes had significant efficacy compared to distilled water.