Search published articles


Showing 7 results for Lotfi

H. Lotfizade ,
Volume 1, Issue 3 (10 1987)
Abstract

It appears that until bone graft has not achieved 100% success, intraradicular diseases remain controversial and therefore, different treatment plans are suggested for them. Treating intraradicular diseases depend on many factors: maxillary molars are more prone to bone loss and have worse prognosis. To assess prognosis more carefully these factors should be considered: 1) bone loss: its apical depth, local or generalized 2) bone condition: buccal, lingual, mesial and distal aspects 3) tooth mobility: grades 2 and 3 have not good prognosis. Crown root ratio is also important. 4) the angle of divergence of roots: the more the roots are divergent, the better the prognosis would be. 5)adjacent teeth health 6)tooth position in jaws 7) age and general health of the patients 8) oral hygiene In general, teeth with 2 roots can be treated more effectively than 3 root ones. Maxillary first premolars are exceptions that do not respond to the treatments positively. We should look forward to the future investigations and findings.


Sh. Namjoy Nik , R. Lotfi ,
Volume 15, Issue 3 (8 2002)
Abstract

Nowadays, different materials have been used for regeneration of interosseous defects and Neo-Os is one of them. The objective of this study was to evaluate histologically the influence of Neo-Os® particles on bone regeneration using rabbit caivarias defects with and without protection of Gore-Tex® barrier membrane. A cutaneous- periosteal incision and flap was made on the forehead of 32 rabbits exposing the top o"" the skull. A standardized trans-osseous skull defect (8 mm diameter) was made in each of the parietal bone with rotating round bur. In half of the rabbits, one defect was filled with the Neo-Os® particles without any type of the barrier membrane. The other defect was left empty. In the other half of the rabbits, one defect was filled with Neo-Os® and two flat expanded polytetrafiuoroethyiene (Gore-tex®) membranes. For the other defect, only the Gore-tex membrane protected the defect. After 8 and 16 weeks, the specimens were processed using standard, decalcified, hard tissue histology techniques. Rabbit caivarias defects treated with Neo-Os® particles and polytetrafiuoroethyiene (Gore-tex®) membrane, healed by in growth of woven bone from the defect margins and by formation of bony islands within the defect area. Finally, the defects were treated with woven and lamellar bone.


S. Vosough Hosseini, M. Lotfi, Ma. Saghiri, A. Fatemi,
Volume 21, Issue 2 (12 2008)
Abstract

Background and Aim: Three Dimensional obturation of root canal is one of the main goals of root canal therapy to preserve health or reach the regeneration or healing of periapical tissues. Root end filling materials are used in numerous situations to reach the mentioned goals. One of the common root end- filling materials is mineral trioxide aggregate (MTA) which the foreign and Iranian ones are different in their prices. The aim of this study was to compare the rat connective tissue reaction to Iranian and foreign MTA.

Materials and Methods: This was an animal study in which 40 rats were divided into 5 groups of each 8. The polyethylene tubes filled with foreign (Pro Root MTA) and Iranian (Root MTA) white MTA and were implanted in subcutaneous connective tissue. Similarly, the empty tubes were inserted in subcutaneous connective tissue as control group. The samples were examined histologically after 7, 14, 30, 60 and 90 days and were scored as followings: 0, was characterized to samples without inflammatory cells without inflammatory reaction 1, for samples with less than 25 inflammatory cells mild inflammatory reaction. 2, for samples with 25 to 125 inflammatory cells moderate inflammatory reaction and 3, for ones with more than 125 inflammatory cells severe inflammatory reaction. The data were analyzed using Kruskal-Wallis test and p<0.05 was considered as the level of significance.

Results: In general, inflammatory reactions were reduced in all groups. Experimental groups had moderate to severe inflammation in the 7th day which had significant difference with the control group having mild to moderate inflammation (p=0.04). There was not any significant differences between experimental and control group in 14th, 30th, 60th and 90th days (p>0.05).

Conclusion: Based on the findings of this investigation, inflammatory subcutaneous connective tissue reaction to Iranian (Root MTA) and foreign (Pro Root MTA) MTA was the same.


Mohamad Hosein Lotfi Kamrani, Mahdi Tabrizizadeh, Yosef Khlil Sefat, Vahid Yegane,
Volume 24, Issue 4 (28 2012)
Abstract

Background and Aims: The seal provided by a root canal filling may be compromised by post space preparation. The aim of this study was to compare coronal microleakage around cast posts and prefabricated pins.

Materials and Methods: Thirty-eight extracted single-rooted, maxillary human teeth were prepared with step back method and filled with gutta-percha and sealer. After removing 8 mm of coronal gutta-percha with peeso-reamer drills #2 in twenty canals, the teeth were divided into three groups: cast post & core, prefabricated pin,  and gutta-percha (without any post or pin). After thermocycling, the samples were immersed in India ink for seven days. Finally, the specimens were cleared and the coronal microleakage of dye was then measured by the stereomicroscope. The data were analyzed by One-way ANOVA and Tukey HSD tests.

Results: According to the results, the mean dye penetration in cast posts, pins, and group without post or pin was 3.3 (0.39), 5.2 (0.47), and 7.2 (0.15) mm, respectively. There was no statistically significant difference between the groups (P>0.05).

Conclusion: Considering the importance of adequate filling of crown for prevention of microleakage, the method for coronal filling must be selected with caution. According to the results of this study, no significant difference between microleakage of cast posts and prefabricated pins was observed.


Abbas Ali Jafari, Mohamad Hosein Lotfi Kamran, Abbas Falah Tafti, Esmaiel Kheirkhah,
Volume 25, Issue 1 (7 2012)
Abstract

Background and Aims: Since impression materials usually contact with saliva, blood, and oral soft tissues, their microbial contamination are harmful in immunocompromised patients. The aim of the present study was to determine the bacterial and fungal contamination in common impression materials.

Materials and Methods: In current lab trial study, 5 different samples from each 4 impression materials were homogenized in 1 ml Tween 80 and then 100µl of each sample were cultured onto blood agar, EMB, or sabouraud dextrose agar. Bacterial and fungal cultures were incubated at 37º C and 30º C, respectively. The isolated bacterial and fungal colonies were enumerated and identified using specific diagnostic media and tests. Data were analyzed using Kruskal-Wallis test.

Results: Totally 75% of samples had one or several bacterial contaminations. Iranian alginate and Speedex (putty) were the most contaminated samples. On the other hand, Speedex (light body) and foreign alginate showed lower contamination. Species of Micrococcus, Staphylococcus, Bacilluses, Corynebacteria, gram negative Citrobacter, Actinomycetes and Neisseria were isolated from the analyzed impression materials. Aspergillus, Penicillium, Alternaria, Cladosporium and Sepdonium were the fungi isolated from impression materials. Statistical significant difference was shown between bacterial contamination of Iranian and foreign alginates (P=0.001). There was no statistical significant differences between the bacterial and fungal isolated colonies (CFU/gr) of 4 tested impression materials (P=0.21).

Conclusion: Several opportunistic bacteria and fungi were isolated from impression materials especially from Iranian alginate and Speedex putty which indicated their contamination.


Samaneh Bayat, Shirin Sakhdari, Ali Mokhtar, Ali Lotfi, Mehdi Amiri Siavashani,
Volume 28, Issue 4 (1-2016)
Abstract

Background and Aims: Central odontogenic fibroma is a rare odontogenic neoplasm that originates from odontogenic ectomesenchyme. Most cases occur in the mandible and between the ages of 11 and 39 years. The neoplasm shows a definite female preponderance, with a ratio of 2.2:1 and has a very low recurrence rate. The aim of this article was to report a case of this rare lesion which was accidentaly found.

Case Report: A 11-year-old female, during her orthodontic treatment and without any complain and any sign or symptoms, performed a panoramic image for assessing the permanent teeth buds. In the panoramic view a unilocular radiolucent lesion with well-defined and corticated borders in the right mandibular body region was evident. The lesion was treated with simple excision. Simple type of central odontogenic fibroma histopathologic features was observed in the microscopic view.

Conclusion: Although the central odontogenic fibroma is a rare benign neoplasm, however, a careful evaluation of radiographic images is important for early detection of lesions because the patient may have no clinical symptoms such as swelling, pain and paresthesia.


Mohammad Hosain Lotfi Kamran, Mahnaz Hatami, Abbas Fallah Tafti, Mohammad Malekzadeh,
Volume 30, Issue 3 (10-2017)
Abstract

Background and Aims: To create a good adhesion between porcelain veneers and zirconia restorations has been important issues is the prosthesis. The aim of this study was to identify an effective way to prepare the zirconia surface infrastructure to increase its shear bond strength to the porcelain veneer.
Materials and Methods: 75 samples of zirconia (Y-TZP) cylinders (diameter of 7 mm and a thickness of 3 mm) were fabricated. Based on the surface treatment, specimens were randomly divided into 3 groups: control, air abrasion and
Er-YAG laser. After surface treatment, the specimen surfaces were examined by SEM. Using a metal mold, the porcelain was veneered on the zirconia surface and then fired. After thermocycling, the shear bond strength of porcelain to zirconia was measured and then the failure mode of each specimen was analyzed using a stereo-microscope. Data were analyzed by one-way ANOVA and Tukey test.
Results: Significant differences were observed between the mean shear bond strength of different groups (P=0.001). The greatest amount of shear bond strength was observed in the group (S) and the lowest bond strength in the control group. Analysis of failure modes showed no statistically significant difference in the type of failure among study groups. The adhesive failure was predominating failure at the intersection of porcelain veneers.
Conclusion: The highest shear bond strength between zirconia and porcelain was achieved by sandblasting the zirconia surfaces compare with that of Er_YAG application.


Page 1 from 1     

© 2024 , Tehran University of Medical Sciences, CC BY-NC 4.0

Designed & Developed by: Yektaweb