Showing 16 results for Moradi
T. Kermany , Ar. Varasteh , Mr. Nicravesh , M. Moradi ,
Volume 13, Issue 2 (7 2000)
Abstract
Mesenchymal- epithelial interactions during embryogenesis have been shown to be important in the fetal development of many organs. Identification of molecules that modulate these interactions is key to our understanding of the pathological conditions. The major groups of extracellular matrix (ECM) molecules characterized are glycosaminoglycans that candidate for morphogenesis and differentiation of ceils and tissues. In this study the molecules of ECM were considered in tooth development, pregnant female mice of balb-c were stained (vaginal plug=0 day) and embryos (E12-E19) and newborns (PN1-PN9) were collected. Tissues were fixed, processed embedded and sectioned. Sections were stained with the following methods: Alcian Blue (pH=l), PAS-Alcian Blue (pH=2.5), Aician Blue(pH=5.8) prepared with for MgCL2 concentrations (CEC1- CEC4) and toluidin Blue. Non- parametric statistical test (Kruskall- Wallis) showed significant difference between groups from the point of hyaluronic acid, chondroitin sulfate, carboxylated and sulfated glycosaminoglycan in pulp. It seems that the synthesis and secretion of components of ECM is important in morphogenic events and followed by a spatiotemporal pattern and developmentally regulated.
S. Nokar , S. Moradian , M. Mohammad Zade ,
Volume 16, Issue 4 (9 2004)
Abstract
Statement of Problem: Color matching and accurate shade selection are the challenging problems common to restorative dentistry. In ceramometal restorations, the type of substructure alloy affects the final color of bonded porcelain. Nickel- chromium alloy is the most commonly used one that its Iranian product, namely Minalux, is similar to Verabond2.
Purpose: The aim of this study was to assess and compare various color dimensions resulting from Minalux and Verabond2 alloys.
Materials and Methods: Nine disks, approximately 16 mm in diameter and 0.5 mm thickness, were cast from each alloy. Then, porcelain Vita VMK68 A2 was baked onto the entire test disks, following the manufacturer's instruction. Color samples, at the same time and under the same conditions, was measured by Data color spectrophotometer in CIE Lab System and Munsel system under four light sources (A, C, D65 and TL81). Then MATLAB TOOL BOX Statistic 5.2 was used to determine mean and bilateral variance analysis.
Results: It was indicated that the F value on hue, value and chroma was less than of the table value stated with 99% coefficient confidence, confirming Ho theory. In other words, there were not any significant differences between ceramometal disks made of Minalux and Verabond2 in the three dimensions of color.
Conclusion: Having desirable physical, mechanical and biological properties, Verabond2 can be replaced by Minalux alloy.
H. Jalali , S. Moradian , D. Jalaei ,
Volume 18, Issue 3 (11 2005)
Abstract
Background and Aim: With the introduction of porcelain veneers to fulfill patients’ esthetic needs, question raises about the ability of the veneers to cover the substructure discoloration. It seems that using shade modifiers under the porcelain veneers can neutralize the discoloration. The goal of this study was to determine the efficacy of shade modifiers in correcting tooth discoloration, when used with resin cements under porcelain veneers.
Materials and Methods: In this experimental study, 60 porcelain discs with two thicknesses of 0.7 mm and 2 mm (30 porcelain of each thickness) were made from ceramco porcelain powder. 40 of them were in A2 shade and 20 were made by the mixture of A2 shade porcelain powder and porcelain stain to represent tooth discoloration. Then all the laminate discs (0.7 mm) were cemented over the 2 mm thick discs to make groups of 10 samples as followed: 1- The first group: laminate discs + resin cement + 2mm thick discs with A2 shade. 2- The second group: laminate discs + resin cement + 2mm thick discolored discs. 3- The third group: laminate discs+ resin cement+ shade modifier+ 2mm thick discolored discs. The color of 30 specimens was measured by spectrophotometer in 2 conditions. 1- To include the specular reflection (SCI). 2- To exclude specular reflection (SCE). In each condition the specimens were measured on both a white background (W) and a black one (B). The mean color differences (E) of each specimen in the second and third group with the specimens of the first group were calculated. Data were analyzed using Paired sample t-test and P<0.05 of significance.
Results: Color measurements showed that in SCIW condition L was significantly different among the three groups except the first and the third. In SCEW condition all the parameters showed significant differences. In SCIB condition, E was not significantly different between the second and the third groups. Hue (h) parameter wasn’t different between groups one and three neither was chroma (c) among the three groups. In SCEB condition, E was not statistically different between groups two and three.
Conclusion: Considering the statistical results, shade modifier couldn’t completely match the color of the specimens in the third group with the first one. But, the lower E for the third group comparing to the second one means that shade modifier was successful in reducing the effect of substructure discoloration.
M. Mirzaei , N. Moradimajd ,
Volume 20, Issue 2 (9 2007)
Abstract
Background and Aim: Light cured composites and other restorative materials are quite common in dentistry today. Successful restorations are dependent on efficiency of curing light unit, eg. the intensity of emitted light and its wave length. The aim of this study was to evaluate the efficiency units of curing, in private dental offices in Tehran.
Materials and Methods: In this descriptive cross sectional study, light curing devices in 240 private dental offices were evaluated randomly. Light intensity was measured by radiometer, debris on the fan and cracks and scratches on the filter were directly observed and the age of the device, frequency of changing the bulb and satisfaction of the dentist with regard to the light curing unit were recorded in a questionnaire. Data were analyzed using Spearman and t test, with p<0.05 as the level of significance.
Results: The results showed that 53.8% of the units had intensities more than 300 mW/cm2. The intensity of 30.4% of curing light units were between 20 and 300 mW/cm2 and 15.8% had intensities lower than 200 mW/cm2. There was a negative relation between light intensity and the age of the unit, frequency of bulb changing or scratches on the filter and debris on the fan.
Conclusion: The results of this study showed that the light intensities of about 46% of light curing units used in private dental practices and clinics were inadequate. Since factors like aging of the curing light unit, frequent bulb changing, increasing the amount of debris on the fan and scratches on the filter reduce the light intensity, regular quality control of these devices is essential.
Masumeh Hasani Tabatabaei, Sakineh Arami, Fatemeh Khajavi, Zohreh Moradi,
Volume 29, Issue 4 (1-2017)
Abstract
Background and Aims: Despite the reduction of incidence of dental caries in recent years, this disease is common and many efforts were conducted to decrease the prevalence of dental caries. On the other hand secondary caries lesions are the main reason for replacement of direct restorations. Therefore, the aim of the current study was to evaluate suitable methods of preparation and restorative materials to reduce caries recurrence.
Materials and Methods: In this experimental study, eighty human teeth were collected and stored in normal saline. The teeth were soft-tissue debrided and cleaned with water/pumice slurry and rubber cups in a low-speed handpiece. Speciments were randomly divided in two main groups. Cavities were prepared with diamond burs or Er:YAG laser (10 Hz, 300 mJ, 3W). Each group was divided into 4 sub-groups, and restored with a glass-ionomer cement (Fuji IX), resin modified glass-ionomer (Fuji II LC), total etch bonding + composite resin or self-etch bonding + composite resin. The specimens were submitted to pH cycling. Speciments were then sectioned, polished and Vickers microhardness measurements were performed on each specimen. Differences among the medians were analyzed using two way ANOVA test at a 95% confidence level and Tukey test.
Results: Statistical analysis showed significant difference in the type of substrate (enamel, dentin) in both main groups (P<0.0001) but no differences in the caries lesion development between the cavities restored with the same material and prepared with diamond burs or Er:YAG laser.
Conclusion: The Er:YAG laser used for cavity preparation and different types of restorative materials used did not show the ability to guarantee significantly more acid-resistance tooth structure against demineralization.
Esmail Yassini, Mansoureh Mirzaei, Bahar Safaei Yazdi, Zohreh Moradi,
Volume 30, Issue 3 (10-2017)
Abstract
Background and Aims: One of the main disadvantages of light cured composite resin materials is polymerization shrinkage upon curing. This leads to the microleakage of restoration and finally failure of the restoration. The purpose of this study was to investigate the effect of two types of light curing devices with different modes on the microleakage of posterior composite filling in Cl II restorations.
Materials and Methods: In this experimental study, 30 extracted sound molar human teeth were collected. All specimens were randomly divided into 3 groups of ten: Standard LED irradiation, pulse curing LED irradiation and QTH irradiation. All samples were prepared with mesial and distal boxes and composite fillings were done with three different light curing patterns for 20 s. After thermocycling, the specimens were kept in 2% methylene Blue solution for 24 h for microleakage test. After sectioning, the samples were evaluated by a stereomicroscope. For data analysis one-way ANOVA and Kolmogorov-Smirnov were used. P<0.05 was considered statistically significant.
Results: The quantitative tests showed that there were no statistical difference between study groups (P>0.05).
Conclusion: The results showed that both light curing devices were effective and no significant difference between different modes of LED light curing device on microleakage of class II composite restorations was found.
Sakineh Arami, Sakineh Arami, Masoumeh Hasani Tabatabaei, Seyed Reza Najafzadeh, Ahmadreza Shamshiri, Zohreh Moradi,
Volume 30, Issue 4 (1-2018)
Abstract
Background and Aims: According to many uses of MTA in different treatments, studying about its properties like the setting time, is of great importance. The aim of this study was to compare the initial and final setting time of an Iranian MTA and a foreign MTA.
Materials and Methods: Seven samples were in each group; for measurement of initial and final setting time of MTAs, a mold with dimension of 2×10 mm was prepared. The cements after mixation were put into an incubator with temperature of 37ₒC and humidity of 90%. After mixing of cements, a Gilmore needle with a weight of 100 gr and active tip of 2 mm was used vertically on the surface of MTA for measurement of the initial setting time. Setting was measured by the start of cement mixation to the time the tip of the needle didn’t penetrate to the surface of MTA. For measurement of the final setting time a Gilmore needle with a weight of 456 gr and active tip of 1mm was used vertically on the surface of MTA. The ANOVA test followed by Tukey test was used for comparison of the mean setting time between an Iranian and foreign MTA. The statistical difference was considered significant at the level of 0.05.
Resultes: The mean initial setting time Angelus and Root MTAs were 13.57±0.91 and 11.14±0.92 min, the mean final setting of Angelus and Root MTA, were 48.93±1.54 and 37.86±1.5 min while the initial setting time of Angelus MTA lasted for 0.53±43.2 more min than Root MTA (P=0.001). The final setting time of Angelus MTA took longer for 110.7±0.82 min than Root MTA (P=0.001).
Conclusion: The initial and final setting time of the Iranian MTA was shorter than the foreign one and thus it could a more alternative option in this respect.
Abbasali Khademi, Seyed Amir Mousavi, Azizolah Moraditalab, Shirin Shahnaseri, Saber Khazaei, Reyhaneh Tajali,
Volume 31, Issue 1 (6-2018)
Abstract
Background and Aims: Microorganisms are the main cause of pulpal and periapical diseases. The most important failure factor is the lack of proper seals for the canal, resulting in microbial leakage. Therefore, the purpose of this study was to evaluate the sealing ability of ProRoot MTA and Bio MTA in canal obturation using fluid infiltration.
Materials and Methods: In this experimental study, 46 extracted mandibular premolar single canal teeth were used. After preparing and disinfecting the teeth with 3% sodium hypochlorite, their crowns were cut off from the cement-enamel junction. The teeth were then randomly divided into four groups: Group 1 (n=20) Bio MTA, Group 2 MTA ProRoot (n=20), negative and positive control groups, each of them contained 3 teeth. The preparation of teeth was performed using the step back method. The filled teeth were then evaluated by fluid filtration for leakage prevention. Data were analyzed by Mann-Whitney test and Tukey test (α=0.05).
Results: The results of statistical analysis showed that there was no significant difference between the MTA ProRoot and Bio MTA in sealing ability (P>0.05). That micro leakage is less in the Bio MTA group than in the ProRoot MTA group, but the difference was not significant.
Conclusion: This study showed that MTA ProRoot and Bio MTA can be used as appropriate canal filling materials.
Mehdi Abbasi, Aghil Rahmani, Ladan Ranjbar Omrani, Zohreh Moradi, Masumeh Hasani Tabatabaei, Sara Valizadeh,
Volume 31, Issue 3 (11-2018)
Abstract
Background and Aims: Color is the most important and complicated part of aesthetic dentistry. The tooth color matching of restorations is considered as one of the most difficult tasks in the restorative dentistry. The aim of this study to evaluate the effect of two training methods on the dental students’ ability in determining tooth color matching.
Materials and Methods: In this study, 40 dentistry students participated which randomly allocated into two groups. The first group consisted of students who learned teeth color matching methods practically. In the second group, training booklet was used for learning. Using Vita Classic shade guide series, 4 color samples were chosen and the students of each group were asked to determine samples’ color, before, after and one month after the training.
Results: Booklet learning group was more successful in determining fourth color sample. However, in no studied group and no used samples, the results of one month after learning were not better than that of before learning. Also generally, no significant relationship was found between the color matching accuracy, using glasses, and sex of participants.
Conclusion: The use of booklet learning was more effective than practical learning in color matching accuracy for dental students. Also, using glasses and sex were not effective on their color matching accuracy.
Zohreh Moradi, Masumeh Hasani Tabatabaei, Abolfazl Fateh, Mohammad Javad Torkamani, Ladan Ranjbar Omrani, Sara Valizadeh,
Volume 31, Issue 4 (1-2019)
Abstract
Background and Aims: Methicillin-resistant Staphylococcus Aureus (MRSA) is an important infection source in dentistry for different disinfectants to be used to prevent its transmission. Furthermore, a variety of chemical disinfectants are developed to remove bacterial infections from the dental care workers' hands and claims are made regarding their superiority in infection control, although all requires scientific investigations. The aim of present study was to compare the effects of chemical hand-disinfectants Micro Zed HD, Aseptoman and Decosept on MRSA (methicillin resistant staphylococcus aureus) in different periods of time.
Materials and Methods: In this experimental study, the antibacterial efficacy of three hand-disinfectants on standard strain of MRSA (USA300: ATCC® BAA-1717™) was evaluated according to European standard of evaluating antiseptics (EN 1040:2005 CSN EN). First we prepared a 0.5 Mc Farland (108 CFU/ml) suspension of MRSA, and exposed to three disinfectants for 15, 30, 60 and 90 seconds. Then, they were transferred to separate plates of Mueller-Hinton medium and incubated in 37◦C for 24 hours. The plates were compared then with control plate to evaluate the efficacy of materials on bacteria by calculating the CFU/ml of plates.
Results: Three hand-disinfectants evaluated in this study had the maximum anticabterial effect on MRSA in the minimum time of exposure (15 seconds), and we found no trace of growth in any plates.
Conclusion: The three hand-disinfectans (MicroZed HD, Aseptoman and Decosept) in the concentration suggested by their companies, showed no difference in efficacy to remove MRSA from hands.
Maliheh Karame, Masoud Moradi, Farank Shafiee,
Volume 31, Issue 4 (1-2019)
Abstract
Background and Aims: Trauma to primary and permanent teeth caused post-traumatic complications affecting the health of teeth and led to specific problems in treatment. As prognosis of trauma has closed correlation with immediate and correct management after occurrence of the incident and the health educators are the first people in contact with children in this places, their awareness of how to deal with these injuries plays an important role in prevention and treatment. This study aimed to evaluate the knowledge of health educators in confrontation with dental injuries in primary schools of Sanandaj in 2018.
Materials and Methods: In this cross-sectional study, all of fifty-nine health teachers in primary schools of Sanandaj were identified after referring to education centre. The questionnaires were provided to the school health teachers after referring to schools and after completing questionnaires, collected data were analyzed. In order to test the research hypotheses, Multiple regression, Non-parametric tests of spearman correlation coefficient, Mann-Whitney and kruskal-wallis were utilized using SPSS software version 20.
Results: The mean knowledge score of fifty-nine health educators was 14.02±3.41 and knowledge score of females was higher. There was no significant statistical correlation between knowledge score, age,
work experience and education level (P>0.05). In this study, the knowledge score of experienced teachers in confrontation with injured persons and health educators who attended related training courses, was higher than others but this difference was not statistically significant (P>0.05).
Conclusion: The results indicated inadequate knowledge regarding emergency management of dental trauma. Thus strategies to improve the teachers’ knowledge about dental trauma can positively influence their knowledge and attitudes toward emergency management of dental trauma.
Fatemeh Ensafi, Tabassom Hooshmand, Maryam Pirmoradian,
Volume 32, Issue 1 (7-2019)
Abstract
Background and Aims: Today, resin composites are one of the most commonly used materials in restorative dentistry. However, failure in resin treatments is also common due to its chemical nature and its high talent for decay recurrence. According to conservative approaches, "conservative" treatments are more likely to be considered than "Replacement" of damaged remedies. The purpose of this study was to compare different surface preparation methods on composite surfaces to achieve the highest bond strength between the old and new composites after accelerated aging.
Materials and Methods: First, composite cylinders with a diameter of 6 and a height of 5 mm were prepared using an incremental technique and a microhybrid resin composite. The specimens were stored in distilled water for 6 months at 37°C and then the surfaces of all aged compsites were roughened using diamond milling followed by phosphoric acid etching. The specimens were randomly subjected into five groups. Group 1: GC Composite Primer. Group 2: Universal bonding containing silane (Kuraray). Group 3: Self etching adhesive (SE bond; Kuraray) Group 4: silane (Ivoclar Vivadent) + Second bottle of SE bond bonding system (Kuraray). Group 5: control group with no treatment. Then, 5 mm incremental of new composite (similar to the aged composite with different color) were placed on the surfaces of specimens, sectioned, and thermocycled for 3000 cycles for the microtensile bond strength evaluation. The specimens were evaluated using a stereomicroscope after failure. Data were analyzed by one-way ANOVA and Post Hoc Tukey test.
Results: The specimens in which silane and SE bond were used showed the highest mean microtensile bond strength and those treated by universal bond showed the least bond strength which were significantly different (P=0.02). All samples had cohesive failure patterns in all groups and the percentage of failures in old and new composites did not differ significantly (P=0.69).
Conclusion: : Based on the results, all surface preparations used in this study could provide an appropriate bond strength for repair of old composite restorations. Also, the microtensile bond strength between the old and new composites was higher than the cohesive strength of resin composite itself. However, the mean microtensile bond strength value for the group treated by universal bond was significantly lower than those treated by silane and hydrophobic containing bonding system.
Ali Mohammad-Hoseini, Maryam Pirmoradian Najafabadi, Gholamreza Eslami Amirabadi, Mehdi Aragh Bidi Kashani,
Volume 33, Issue 1 (7-2020)
Abstract
Background and Aims: Elastomeric chains are known as a current device with the purpose of dental movement in orthodontic treatments. The aim of this study was to compare the elastomeric behavior and force degradation rate between different elastomeric chains existing in Iran in different time durations.
Materials and Methods: 11 different elastomeric chains used in this study were: Class One, ASTAR, G&H, TSNPT, MIB (French and Chinese type), Ultra Chain and both American, Ortho Technology (simple and memory type). All chains were stretched upon to exert 150 g force and then force degradation rate in 6 time duration
(1, 3, 24 hours and 3, 7, 21 days) and modulus of elasticity (MOE) in 2 time duration (start and 21 days) were investigated. All Data were analyzed statistically by ANOVA, Tukey, Games-Howel tests.
Results: All chains up to the 21th day showed a significant decrease in MOE except for the G&H, ClassOne, simple orthotechnology and a significant force degradation except for the American (memory type). The most significant force degradation rate was in ASTAR gray (P<0.05) and the least in MIB (French), Ultra Chain, and American (P<0.05).
Conclusion: All chains showed significant time-dependent force degradation (mostly in the first day). Only, this rate was not significant in any time duration for the American (memory). In all groups, the most force degradation rate belonged to ASTAR gray and the least to Ultra Chain, MIB (French) and American after 21th day.
Sara Valizadeh, Ladan Ranjbar Omrani, Zohreh Moradi,
Volume 33, Issue 2 (8-2020)
Abstract
Background and Aims: Enoxolon is a natural licorice and its formula is similar to cortisone. The aim of this double blind randomized match control clinical trial, was to analyze the effect of Arthrodont toothpaste containing 1% Enoxolone on dental plaque, gingival inflammation, and bleeding indices.
Materials and Methods: 40 patients who had gingivitis were selected. They were instructed to brush their teeth twice daily for three minutes then massage the gums with pastes for one minute and then wash their mouths. The patients were divided into two groups: The Arthrodont toothpaste containing Enoxolon, was given to the study group and the Crest toothpaste free of Enoxolon, was given to the control group. At the beginning of the study and after 21 days, plaque, gingival, and bleeding indices were measured. The statistical analyses were done by Paird T test, T test and nonparametrical analysis of Wilcoxon and Mann-Whitney.
Results: In both groups, the three indices decreased significantly. Comparing between the two groups, the gingival and bleeding indices had significantly decreased in the study group (Arthrodont toothpaste) compared to the control group (Crest toothpaste). However, no significance difference in the plaque index between the two groups was found (P=0.143).
Conclusion: The results of this clinical study showed that Enoxolon had anti-inflammatory effect on gingivitis.
Fatemeh Sheikhshoaei, Shima Moradi, Seyedeh Sana Alavi Niakoo,
Volume 34, Issue 0 (5-2021)
Abstract
Background and Aims: Dentistry is an important profession ensuring the health of body and soul, and has a special place in the scientific productions of medical disciplines. The purpose of this study was to analyze the co-citation and word co-occurrence of Iranian research papers in the field of dentistry based on indexed documents in Web of Science from 2014 to 2018.
Materials and Methods: The present study follows the procedures related to quantitative research with a descriptive approach and a scientometric technique. Co-citation and co-occurrence analysis techniques were used. In this study, 1079 articles were reviewed from the Web of Science. Data analysis was performed Ucinet Software, and VOS viewer.
Results: Iran has the highest level of international cooperation with the United States. The highest number of published articles in the Web of Science Database belongs to Vahid Derakhshani based on the highest degree of centrality, the Eigen centrality, and the Betweenness centrality. Naser AminAbadi ranked first for the Closeness Centrality metric, and Massoud Peirokh with a citation weight of 20 had the highest citation. The field of surgery has received the most attention among dental and endodontics journal had the highest citation in the Iranian Dental Science Citation Network. |
Conclusion: The trend of publishing scientific articles in Iran in the field of dentistry has been increasing during the selected period. The keywords oral, dental, and pediatric surgery have the most effective and decisive role in the scientific network of dentistry. These keywords provided strong scientific communication amongst the dental scholars in Iran.
Sara Valizadeh, Samaneh I Rezaei Dehnamak, Hamid Reza Khodayar, Ahmad Reza Shamshiri, Zohreh Moradi,
Volume 34, Issue 0 (5-2021)
Abstract
Background and Aims: Due to the review of general dental courses, it was necessary to assess the students' satisfaction with this curriculum. The aim of this study was the assessment level of students’satisfaction with the new educational curriculum of the Ministry of Health at the department of restorative dentistry of Tehran university of medical sciences in 2019-2020.
Materials and Methods: In this descriptive cross-sectional trial,72 sixth year dental students of Tehran University who passed the restorative dentistry courses based on the new curriculum were studied. A questionnaire was developed and for validity content assessment, it was presented to 5 professors and then revised. For reliability approval of the questionnaire, test-retest approach was used. The questionnaire was given to the 30 students of the main pilot group in one session and two-week later and agreement percentage and Kappa index were calculated. After conducting the "test" process and re-testing, the "questions" were statistically analyzed using STATA software.
Results: The most level of satisfaction regarding to practicality of subjects was found for fundamental of restorative dentistry including principles of amalgam class I cavity preparations and restorations on the dentic (81.94% and 76.39% acceptable respectively) and the principles of amalgam classII cavity restorations on the dentic (72.22%). The least satisfaction levels were obsereved in the first and second theoretical restorative courses including tooth-colored restorations (47.22%), onlays and inlays (47.22%) and tooth-colored classII cavity preparations and restorations (48.61%). The amount (P-value or error of the first type) was reported in all questions>0.001.
Conclusion: Despite the limitation of this study, final-year dental students’ satisfaction of theoretical restorative dentistry courses was medium, while it was high for the fundamental and practical restorative courses of 2017 educational curriculum.
