Showing 8 results for Ranjbar
M. Paknejad , R. Ranjbar ,
Volume 12, Issue 1 (9 1999)
Abstract
Growth factors are biological mediators that have a key roll in proliferation, chemotaxy and differentiation by acting on specific receptors on the surface of cells and regulating events in wound healing.They can be considered hormones that are not released in to the blood stream but have one a local action. Some of these factors can regulate premature change in GO to Gl phase in cell devesion cycle and even may stimulate synthesis of DNA in suitable cells, Growth substances, primarily secreted by fibroblasts, endothelia! cells, macrophages and platelet, include platelet derived growth factor (PDGF), insulin like growth factor (IGF) transforming growth factor (TGF)a and (3 and bone morphogenetic proteins BMPs that approximately are the most important of them. (BMP)s could be used to control events during periodontal, craniofacial and implant wound healing through favoring bone formation According toLynch, combination of PGDF and IGF1 would be effective in promoting growth of all the components of the periodontium.The aim of this study was to characterize growth factor and review the literature to determine the mechanism of their function, classification and application in implant and periodontal treatment.
E. Yasini, H. Kermanshah, M. Mirzaie, B. Ranjbar Omidi,
Volume 24, Issue 3 (21 2011)
Abstract
Background and Aims: Marginal seal in class V cavities and determining the best restorative material to decrease microleakage is of great importance in operative dentistry. The aim of this study was to evaluate the effect of polishing time on the microleakage of three types of tooth-colored restorative materials in class V cavity preparations and to assess the marginal integrity of these materials using scanning electron microscope (SEM).
Materials and Methods: In this in vitro study, class V cavity preparations were made on the buccal and lingual surfaces of 30 bovine incisors (60 cavities). The specimens were divided into three groups each containing 10 teeth (20 cavities): group 1, Filtek Z350 (nanocomposite) group 2, Fuji IX/G Coat Plus (CGIC) and group 3, Fuji II LC (RMGI). In each group, half of the specimens (n = 20) were finished/polished immediately and the rest of them were finished/polished after 24 hours. All the specimens were thermocycled for 2000 cycles (5-50 °C). Epoxy resin replicas of 12 specimens (2 restorations in each subgroup) were evaluated using SEM and the interfacial gaps were measured. Finally, the teeth were immersed in 0.5% basic fuchsin dye for 24 hours at room temperature, sectioned and observed under stereomicroscope. The data were analyzed using Kruskal-Wallis and Mann-Whitney U tests and the comparison between incisal and cervical microleakage was made with Wilcoxon test.
Results: Incisal and cervical microleakage were not affected by polishing time in none of the three restorative materials (P>0.05). Cervical microleakage only in Fuji IX with immediate polishing was significantly higher than incisal microleakage (P<0.05). Incisal and cervical microleakage with immediate or delayed polishing were not significantly different in Fuji IX, Fuji II LC, and Z350 (P>0.05).
Conclusion: Immediate polishing is recommended in tooth-colored class V restorations.
Baharan Ranjbar Omidi, Ladan Madani, Aida Mirnejad Joybari, Ensyeh Rashvand, Sonia Oveisi,
Volume 28, Issue 2 (7-2015)
Abstract
Background and Aims: Microleakage is an important problem with direct restorations and familiarity with contributing factors is of utmost importance. The aim of this study was to evaluate the microleakage of three glass ionomer restorations in class V cavities.
Materials and Methods: In this in vitro study, class V cavity preparations were made on the buccal and lingual/ palatal surfaces of 30 human premolars (60 cavities). The specimens were divided into three group (n=10, 20 cavities). Restored as follows: group1: with Fuji IX (HVGI) ionomer/G coat plus, group 2: Ionofil molar (HVGI)/ G coat plus, and group 3: Fuji II LC (RMGI) / G coat plus. All specimens were finished and polished immediately and were thermocycled (2000 cycles, 5-50°C) . In each group half of the teeth were load cycled (50000 cycles). Finally, the teeth were immersed in 0.15% basic fushine dye for 24 hours at room temperature and then sectioned and observed under stereomicroscope. Data were analyzed using Kruskal-Wallis, Man- Whitney test and a comparison between incisal and gingival microleakage was made using Wilcoxon analysis.
Results: It was shown that the mechanical load cycling and filling material did not cause a statistically significant increase in the incisal and gingival microleakage in any of groups (P>0.05).
Conclusion: It was concluded that the extent microleakage of Fuji II LC was similar to that of the highly viscous glass ionomers (Ionofil molar, Fuji IX) and load cycling did not increase the microleakage.
Mansore Mirzaie, Esmaiel Yasini, Ladan Ranjbar Omrani, Morteza Rokni, Hojat Darvishpour ,
Volume 28, Issue 4 (1-2016)
Abstract
Background and Aims: Microleakage is a criterion proposed for assessing the success of any restorative material. Complete seal is difficult especially for dentin margins compared to enamel margins. The aim of this study was to assess the microleakage at the enamel and dentin margins of class V cavities restored by two GIs and two self-etch adhesive systems.
Materials and Methods: This study was done on forty third molars. Class V cavities (3×2×2mm) were prepared on the buccal and lingual surfaces of teeth using high speed handpiece with 0.8 mm diamond fissure burr. The occlusal margins of the cavities in the enamel and gingival margins were placed 1 mm below the CEJ. The teeth were divided into 4 groups and the bondings were cured for 20 sec and the teeth were restored. The specimens were kept in distilled water at the temperature of 37°C for 24 hrs. The teeth were thermo cycled and cut in buccolingual direction using diamond disc under water. The dye penetration was evaluated using a stereomicroscope and the leakage was scored. The scores were compared using Kruskal-Wallis test while the paired comparisons were done using Bonferroni correction. P≤0.05 was regarded as significant results.
Results: Microleakage scores were similar at the occlusal and gingival walls of all test groups. At the gingival walls, the least microleakage scores were observed. “Fuji IX + SE bond” group showed significant differences with the “Fuji IX + G bond” and “Nanoglass + G bond” groups (P≤0.05). At the occlusal walls, the least scores were observed in the “Fuji IX+SE bond” specimens which were significantly different from the other groups (P≤0.05).
Conclusion: Self-Cure glass ionomers yielded less microleakage scores compared to the different types of light-cures due to the less polymerization shrinkage.
Ladan Ranjbar Omrani, Masumeh Hasani Tabatabaei, Soma Faridi, Elham Ahmad,
Volume 30, Issue 3 (10-2017)
Abstract
Background and Aims: The aim of this study was to evaluate the effects of two fluoride containing mouth rinses on the color stability of two different resin composites.
Materials and Methods: 27 specimens (2×4×5 mm) were prepared from each of the following materials: a micro filled composite (Gradia, GC) and nanohybrid (Grandio). The specimens were polished by Soflex fine and superfine disks and then incubated in artificial saliva at 37°C for 24 h. The baseline color values (L, a, b) of each specimen were measured using an Easyshade spectrophotometer according to the CIELab color scale. The specimens were immersed in 20 mL of each mouth rinse and stored in an incubator at 37°C for 12 h. After incubation, the color values of all specimens were measured again, and the color change value (ΔE) was calculated. Data were analyzed by a 2-way analysis of variance at a significance level of 0.05.
Results: None of the mouth rinses created clinical significant color changes in the samples. There was no statistically significant difference among color susceptibility between resin composites (P=0.330). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>0.05).
Conclusion: Accordance to the results of this study, the fluoride containing mouth rinses does not create color change in resin composites.
Mehdi Abbasi, Aghil Rahmani, Ladan Ranjbar Omrani, Zohreh Moradi, Masumeh Hasani Tabatabaei, Sara Valizadeh,
Volume 31, Issue 3 (11-2018)
Abstract
Background and Aims: Color is the most important and complicated part of aesthetic dentistry. The tooth color matching of restorations is considered as one of the most difficult tasks in the restorative dentistry. The aim of this study to evaluate the effect of two training methods on the dental students’ ability in determining tooth color matching.
Materials and Methods: In this study, 40 dentistry students participated which randomly allocated into two groups. The first group consisted of students who learned teeth color matching methods practically. In the second group, training booklet was used for learning. Using Vita Classic shade guide series, 4 color samples were chosen and the students of each group were asked to determine samples’ color, before, after and one month after the training.
Results: Booklet learning group was more successful in determining fourth color sample. However, in no studied group and no used samples, the results of one month after learning were not better than that of before learning. Also generally, no significant relationship was found between the color matching accuracy, using glasses, and sex of participants.
Conclusion: The use of booklet learning was more effective than practical learning in color matching accuracy for dental students. Also, using glasses and sex were not effective on their color matching accuracy.
Zohreh Moradi, Masumeh Hasani Tabatabaei, Abolfazl Fateh, Mohammad Javad Torkamani, Ladan Ranjbar Omrani, Sara Valizadeh,
Volume 31, Issue 4 (1-2019)
Abstract
Background and Aims: Methicillin-resistant Staphylococcus Aureus (MRSA) is an important infection source in dentistry for different disinfectants to be used to prevent its transmission. Furthermore, a variety of chemical disinfectants are developed to remove bacterial infections from the dental care workers' hands and claims are made regarding their superiority in infection control, although all requires scientific investigations. The aim of present study was to compare the effects of chemical hand-disinfectants Micro Zed HD, Aseptoman and Decosept on MRSA (methicillin resistant staphylococcus aureus) in different periods of time.
Materials and Methods: In this experimental study, the antibacterial efficacy of three hand-disinfectants on standard strain of MRSA (USA300: ATCC® BAA-1717™) was evaluated according to European standard of evaluating antiseptics (EN 1040:2005 CSN EN). First we prepared a 0.5 Mc Farland (108 CFU/ml) suspension of MRSA, and exposed to three disinfectants for 15, 30, 60 and 90 seconds. Then, they were transferred to separate plates of Mueller-Hinton medium and incubated in 37◦C for 24 hours. The plates were compared then with control plate to evaluate the efficacy of materials on bacteria by calculating the CFU/ml of plates.
Results: Three hand-disinfectants evaluated in this study had the maximum anticabterial effect on MRSA in the minimum time of exposure (15 seconds), and we found no trace of growth in any plates.
Conclusion: The three hand-disinfectans (MicroZed HD, Aseptoman and Decosept) in the concentration suggested by their companies, showed no difference in efficacy to remove MRSA from hands.
Sara Valizadeh, Ladan Ranjbar Omrani, Zohreh Moradi,
Volume 33, Issue 2 (8-2020)
Abstract
Background and Aims: Enoxolon is a natural licorice and its formula is similar to cortisone. The aim of this double blind randomized match control clinical trial, was to analyze the effect of Arthrodont toothpaste containing 1% Enoxolone on dental plaque, gingival inflammation, and bleeding indices.
Materials and Methods: 40 patients who had gingivitis were selected. They were instructed to brush their teeth twice daily for three minutes then massage the gums with pastes for one minute and then wash their mouths. The patients were divided into two groups: The Arthrodont toothpaste containing Enoxolon, was given to the study group and the Crest toothpaste free of Enoxolon, was given to the control group. At the beginning of the study and after 21 days, plaque, gingival, and bleeding indices were measured. The statistical analyses were done by Paird T test, T test and nonparametrical analysis of Wilcoxon and Mann-Whitney.
Results: In both groups, the three indices decreased significantly. Comparing between the two groups, the gingival and bleeding indices had significantly decreased in the study group (Arthrodont toothpaste) compared to the control group (Crest toothpaste). However, no significance difference in the plaque index between the two groups was found (P=0.143).
Conclusion: The results of this clinical study showed that Enoxolon had anti-inflammatory effect on gingivitis.
