Showing 105 results for Ay
Sara Valizadeh, Samaneh I Rezaei Dehnamak, Hamid Reza Khodayar, Ahmad Reza Shamshiri, Zohreh Moradi,
Volume 34, Issue 0 (5-2021)
Abstract
Background and Aims: Due to the review of general dental courses, it was necessary to assess the students' satisfaction with this curriculum. The aim of this study was the assessment level of students’satisfaction with the new educational curriculum of the Ministry of Health at the department of restorative dentistry of Tehran university of medical sciences in 2019-2020.
Materials and Methods: In this descriptive cross-sectional trial,72 sixth year dental students of Tehran University who passed the restorative dentistry courses based on the new curriculum were studied. A questionnaire was developed and for validity content assessment, it was presented to 5 professors and then revised. For reliability approval of the questionnaire, test-retest approach was used. The questionnaire was given to the 30 students of the main pilot group in one session and two-week later and agreement percentage and Kappa index were calculated. After conducting the "test" process and re-testing, the "questions" were statistically analyzed using STATA software.
Results: The most level of satisfaction regarding to practicality of subjects was found for fundamental of restorative dentistry including principles of amalgam class I cavity preparations and restorations on the dentic (81.94% and 76.39% acceptable respectively) and the principles of amalgam classII cavity restorations on the dentic (72.22%). The least satisfaction levels were obsereved in the first and second theoretical restorative courses including tooth-colored restorations (47.22%), onlays and inlays (47.22%) and tooth-colored classII cavity preparations and restorations (48.61%). The amount (P-value or error of the first type) was reported in all questions>0.001.
Conclusion: Despite the limitation of this study, final-year dental students’ satisfaction of theoretical restorative dentistry courses was medium, while it was high for the fundamental and practical restorative courses of 2017 educational curriculum.
Hosnie Yusefi Fakhr, Yadollah Soleimani Shayesteh, Afshin Khorsand, Mehrdad Panjnoush, Mohammad Javad Kharazi Fard, Mohadeseh Heidari,
Volume 35, Issue 0 (5-2022)
Abstract
Background and Aims: According to the importance of primary stability on dental implant success and osseointegration, we intend to check and compare the stability and crestal bone loss rate between osteotomy technique and conventional implant insertion techniques.
Materials and Methods: In this study, 26 implants in anterior segment of maxilla in 13 patients were evaluated. The implants were TBR system (Toulouse, France) with 3.5 diameter and 10.5-12 mm length. The implant stability level was recorded immediately after surgery and 3 months later with Ostell mentor. The periapical radiography was taken immediately after surgery, 3 and 6 months to assess crestal bone resorption. Paired t-test and Wilcoxon signed Rank test used for data analysis.
Results: There were no statistically differences between the two treatments techniques in terms of stability (P>0.05). The mean crestal resorption was higher for the osteotomy technique 3 months after implant insertion (P<0.001) but there were no significant differences after 6 months (P=0.678).
Conclusion: Within the limitations of the current study, it can be concluded that the osteotomy it can be considered as a treatment technique in insufficient bone width.
Elya Ranayi, Fatemeh Rahmatzadeh Yousefabadi, Saber Babazadeh, Ali Kazemian,
Volume 35, Issue 0 (5-2022)
Abstract
Background and Aims: The aim of this study was development and validation of a questionnaire measuring the pseudo-scientific unsupported of Iranians’ belief regarding oral health.
Materials and Methods: A list of 169 pseudo-scientific and invalid Iranian beliefs about oral health that was collected in the previous phase of the study were sent to a purposive sample of 13 professors at Mashhad dental school which resulted in extracting 34 beliefs being considered more common among Iranians. A list of 21 pseudo-scientific beliefs was obtained for preparing the questionnaire after receiving the sample opinions of 21 professors of Mashhad dental school about the invalidity and pseudoscientific propositions and their written revision. Finally, the questionnaire was completed by 44 participants to analyze the ease and clarity and to calculate Cronbach's alpha and Kuder Richardson measure as a homogeneity reliability index. It was completed in a group of 15 participants with a time interval of one month for test-retest analysis and consistency reliability evaluation.
Results: A questionnaire consisting of 21 beliefs was developed using four-point, three-point, or two-point Likert scales. The standardized Cronbach's alpha score and Kuder Richardson's measure score were 0.641 and 0.514, respectively, which indicated the moderate to good reliability of the homogeneity. The Interclass Correlation Coefficient (ICC) was calculated as 0.863, representing very good reliability of consistency of the questionnaire. Furthermore, the kappa coefficient of each of the 21 statements had a significant difference with zero (P<0.05) ranging between 0.605 and 1.
Conclusion: The result of the present study is a questionnaire measuring the level of Iranians’ belief in unsupported and invalid statements about oral health. Using this questionnaire would be helpful for dentists and oral health professionals to promote knowledge of Iranians about oral health.
Yasaman Azimi, Zahra Ghorbani, Tayebe Rojhanian,
Volume 35, Issue 0 (5-2022)
Abstract
Background and Aims: Activity-based costing enumerate every input consumed in treatment. The Covid-19 pandemic changed the dental treatment protocols and the ordinary circumstances of patients. The aim of this study was to calculate and compare the costs of three common dental services in Iran from the viewpoint of the providers and recipients of the services before the Covid-19 pandemic (2019) and during the pandemic (2021).
Materials and Methods: Direct medical and non-medical costs were considered from the service provider's perspective. Direct medical costs, indirect costs, direct non-medical costs, and intangible costs were considered from the recipient's perspective. To calculate the equivalent costs, the base year was considered 2021, and the costs of 2019 were calculated with a discount rate of 16%.
Results: From the service provider's perspective before the pandemic, the cost of dental amalgam restoration was 2,851,235 Rials, root canal treatment was 6,351,580 Rials, and tooth extraction was 1,887,295 Rials. The cost of these services in 2021 was 5,562,150 Rials, 8,070,591 Rials, and 4,865,563 Rials, respectively. From the recipient's perspective, before the pandemic, the cost of tooth restoration was 715,466 Rials, root canal treatment was 2,883,001 Rials, and tooth extraction was 3,267,359 Rials. The cost of the mentioned services in the year 2021 was 1,212,528 Rials, 3,971,640, and 3,680,880 Rials, respectively.
Conclusion: The Covid-19 pandemic has had an effect on increasing the cost of dental services from both the service provider and recipient perspective, but economic volatility has a vital role in increasing the estimated costs in the country. Probably, a part of the increase in costs was due to the role of brokers in providing dental materials and equipment.
Maryam Rabiei, Mohammad Hossein Heidari, Enayatollah Homaei Rad, Mohammad Samami,
Volume 36, Issue 0 (5-2023)
Abstract
Background and Aims: The evaluation of the results of health transformation plan in dentistry, which started in March 2016 with the aim of improving oral and dental health, is extremely important in order to improve planning for future actions. Therefore, the purpose of the present study was to evaluate the effect of the health transformation plan on common oral health indices in Guilan province in Iran.
Materials and Methods: This cross-sectional analytical study was performed using the Health Deputy of Guilan University of Medical Sciences data and results of the general population and housing census of the 2010 and 2015. Data analysis was done using Ordinary Least Squares regression method, considering dependent variables including DMFT, dmft and periodontal disease indices (CPI) and independent variables including gender, education, urban or rural residence, percentage of 13-year-old population, illiteracy rate, fertility rate and being or not in the transformation plan, to investigate the difference between the two groups before and after the implementation of the transformation plan in terms of variables and to examine the relationship between independent and dependent variables. Finally, data were analyzed by STATA SE software version 15.
Results: The health transformation plan did not have a significant relationship with the change of DMFT and CPI 2 to CPI 6 indices, but had succeeded in reducing dmft and CPI1 (P<0.05), which reduction in CPI1 index was not desirable.
Conclusion: It seems that despite the extensive activities of the health transformation plan in dentistry in the field of prevention and treatment, there is still a need for more changes, especially in terms of culture and education. Also, there is need to provide more facilities for access to services by all sections of the society, especially the weak sections for healthcare.
Pooya Jannati, Faranak Vakili, Saeid Nokar, Somayeh Zeighami,
Volume 36, Issue 0 (5-2023)
Abstract
Background and Aims: Endocrown is a type of monoblock restoration using the pulp chamber and remaining coronal tooth structure for retention. Advancements in adhesive techniques have breathed fresh spirit into endocrown. Nowadays, there are two approaches for endocrown: conventional approach and biomimetic approach. This study aimed to review data on the steps and clinical and philosophical points of using these approaches to help dentists’ selection and performance.
Materials and Methods: The review was conducted by reviewing the articles available in PubMed, Scopus, and Google Scholar databases from 1995 to 2022. The keywords used were; Crown, Endodontically-treated teeth, Light-curing of dental adhesive, Onlay, and Post-Core.
Results: After removing duplicates, titles/abstracts were reviewed. Animal studies, studies without available full text or non-English language studies were excluded from the study. Then, the full texts of the remaining 59 articles were evaluated and 49 articles were eligible for the present study. The articles included clinical trials, in vitro, systematic reviews, and case reports.
Conclusion: Endocrown is a successful alternative to crown, especially in molar teeth. Regardless of the conventional or biomimetic approach, this treatment has a more favorable fracture pattern while preserving the remaining tooth tissue as much as possible.
Fereshteh Naser Alavi, Ashkan Salari, Seyedeh-Maryam Tavangar, Reza Tayefeh Davalloo, Farideh Darabi, Zahra Farzi,
Volume 36, Issue 0 (5-2023)
Abstract
Background and Aims: The white color of teeth is one of the most essential factors in smile esthetics. Therefore, various whitening agents such as bleaching mouthwashes have been produced in response to the people’s high demand for having whiter teeth. The present study evaluated the efficacy of three whitening mouthwash products on tooth enamel whiteness.
Materials and Methods: In the present in vitro study, 32 bovine incisors were assigned to four groups in terms of the mouthwash used (n=8): control (C); Xenon Smart White (ZSW), containing pyrophosphate and triphosphate; Signal White Now (SWN), containing Blue Covarine; and Pasta Del Capitano whitening mouthrinse (PCW), containing Plasdone. Colorimetry was carried out using a spectrophotometer at the baseline and 2, 4, 8, and 12 weeks after treatment with mouthwashes. Data were analyzed using CIELab parameters with ANOVA, RM two-way ANOVA, and post hoc Tukey tests (α=0.05).
Results: The results showed that the whiteness created by the SWN mouthwash was clinically visible (ΔE>3.3). However, the functions of all the mouthwashes were statistically similar with no significant differences from the control group (P>0.05).
Conclusion: Although, Blue Covarine-containing mouthwash was somewhat effective in whitening of tooth enamel, none of the mouthwashes had significant efficacy compared to distilled water.
Neda Yousefi Nojookambari, Malihe Naderi, Razie Askari, Somayeh Talebi, Mana Mohammadhosseini, Sahar Shabani, Sajjad Yazdansetad,
Volume 37, Issue 0 (3-2024)
Abstract
Background and Aims: Oral bacteria play an important role in oral diseases, due to their high adaptability to different environmental areas of the mouth. In this article, an attempt was made to describe the molecular mechanisms involved in the physiological relationships of oral and dental environment bacteria and their pathogenic significance with molecular approaches.
Materials and Methods: The present systematic review was written based on the advanced and standard search of keywords including Oral bacteria, Biofilm, and Dental diseases in PubMed, Springer, Scopus, Medline, Google Scholar, Science Direct, and Web of Science databases. For this purpose, an advanced and systematic search of articles published from 1993 to 2023 was conducted to compile the present article.
Results: Bacteria in the oral cavity have nutritional adaptations that are important for living in pathogen-host relationships, including adapting to proteolytic living conditions, using the host's glycome as a nutritional interface. This includes the use of host-derived sialic acid and other glycosidases in oral bacteria. Some of these bacteria adhere to surfaces such as salivary, epithelial proteins, and glycans, which ultimately lead to biofilm formation. Bacteria living in the oral environment are constantly exposed to a wide range of stress-causing factors and oxidative stress in the biofilm.
Conclusion: Dental caries, pulp, periapical, and periodontitis diseases (including gingivitis) are among the most common bacterial diseases. Among them, tooth decay caused by the presence of Streptococcus mutans is the most common dental disease due to the production of acids from carbohydrate fermentation which is characterized by the demineralization of tooth structure.
Afsaneh Ghorbani, Sedigheh Sheikhzadeh, Homayoun Alaghehmand, Valiollah Arash, Seyyed Ali Seyyed Majidi,
Volume 37, Issue 0 (3-2024)
Abstract
Background and Aims: Ensuring the long-term stability of orthodontic treatments and preventing tooth relapse remains a significant challenge in orthodontics, often addressed through the extended use of retainers. Given the pivotal role of retainers' physical and mechanical properties in this regard, this study aimed to investigate the tensile strength, flexural strength, and deflection of three distinct types of fixed orthodontic retainers.
Materials and Methods: In this laboratory study, each group comprised 12 samples of twisted, flat, and coaxial retainer wires, each measuring 8 mm in length. These samples were affixed onto the polyethylene blocks using cyanoacrylate adhesive and subsequently subjected to compressive loads using a universal testing machine. The maximum bending strength and deflection rate were recorded from stress-strain diagrams. To evaluate the tensile strength, the identical samples underwent tensile loading. Statistical analysis was performed utilizing SPSS software, employing analysis of variance tests to compare data between groups.
Results: Significant differences were observed in the bending strength (P=0.004), deflection (P<0.001), and tensile strength (P<0.001) among the investigated retainer wires. The flat retainer wire exhibited the highest bending strength, averaging 822.876±136.07 MPa, while the coaxial retainer wire showed the lowest, with an average of 673.65±73.35 MPa. Regarding deflection, the flat retainer wire displayed the highest average at 4.04±0.6 mm, surpassing the other two types of retainers. However, the tensile strength of the twisted retainer wires, averaging 699.7±83.46 MPa, exceeded that of both the flat and coaxial retainer wires.
Conclusion: The flat retainer wires demonstrated the highest bending and deflection strength, while the twisted retainer wires exhibited the highest tensile strength. Overall, the bending strength, deflection, and tensile strength of the 3-strand twisted and flat retainer wires outperformed those of the 5-strand coaxial retainer wires, increased flexural and tensile strengths imply a higher resistance of the wires to the forces induced by harder and more viscous foodstuffs.
- Shaghayegh Kohzadi, Zahra Mohammadi,
Volume 38, Issue 0 (4-2025)
Abstract
Guided bone and tissue regeneration is a common technique used in the treatment of areas around teeth and dental implants. In this framework, barrier membranes are employed to create a suitable environment that promotes new bone growth while preventing the invasion of foreign cellular components into this specific setting. Attributes such as biocompatibility with living tissues, structural integrity, longevity, and user-friendliness constitute the principal criteria for selecting appropriate membranes for this particular application. Given the extensive diversity of membrane types concerning their sources, texture, architecture, and inherent properties, determining the most suitable variant depends on the clinical condition presented by the patient and the specific treatment modality, thereby emphasizing its considerable importance. In recent years, fibrous membranes have garnered particular attention due to their distinctive characteristics. These membranes, made of natural or synthetic fibers, typically exhibit high porosity, which facilitates the ingress of vascular structures and osteogenic cells. Owing to their porosity and flexibility, fibrous membranes are considered exceptionally suitable for the regeneration of maxillofacial and dental tissues, thereby contributing to increase bone volume, guide its growth, and at the same time prevent soft tissue encroachment into the restoration area, which ultimately has a favorable effect on treatment outcomes. On the other hand, due to the complexity and extent of oral infections, new nanotechnological approaches have been proposed in recent years to reconstruct infected sites in dentistry. These strategies, by targeting specific sites and having non-toxic properties, can help deliver antimicrobial molecules, regenerate tissue, and maintain oral health. In this context, nanofibrous membranes serve as multifunctional structures, both in the controlled release of antimicrobial agents and as scaffolds for the formation of nascent tissue. Overall, fibrous membranes, by mimicking the physiological conditions of the organism, create an ideal environment for the growth and healing of bone tissues, leading to improved effectiveness in dental procedures. This article is devoted in detail to a comprehensive review of polymeric and composite fibrous membranes with drug release potential.
Hojatollah Yousefimanesh, Shahin Goharpay, Sara Kachi Torshaki,
Volume 38, Issue 0 (4-2025)
Abstract
Background and Aims: A large number of dentists are exposed to all kinds of musculoskeletal disorders caused by this profession. This study was conducted with the aim of measuring the prevalence of musculoskeletal problems and its effect on the quality of life of faculty members.
Materials and Methods: The present study was a descriptive analytical study that was conducted by surveying faculty members of the Faculty of Dentistry, Ahvaz University of Medical Sciences in the form of a census. Standard Nordic questionnaires were completed to investigate musculoskeletal problems and quality of life questionnaire. Also, the dentists were asked to determine and mark the level of pain experienced based on the Visual Analogue Scale (VAS). Data was analyzed using t test and chi square test.
Results: In this study, 73 academic staff members were examined, 46 (63%) were women and 27 (37%) were men. The most pain and disorder in the past year was related to the neck (64.4%) and shoulder (56.2%) of participates. The participates that prevented from working because of back pain and of neck pain during the last 12 months were 32(43.8% ) and 31(42.5%), respectively. Most of them (63%) were under 40 years old and the majority have graduated from general and specialized courses, 57.5 % and 37%, respectively, for more than 10 years. In examining the quality of life, the highest score related to the physical function which was 76.98±25.38.
Conclusion: There was a significant statistical relationship between the gender, age and duration of graduation from general and specialized courses with the skeletal and muscular disorders. However, there was no significant statistical relationship between the different aspects of life quality and skeletal and muscular disorders.
Pouyan Zarafshan, Meisam Moradi, Maysam Mirzaie, Pezhman Hadinezhad, Hemmat Gholinia,
Volume 38, Issue 0 (4-2025)
Abstract
Background and aims: Dental anxiety is one of the most common barriers to utilizing oral health services. It can lead to delayed dental visits, treatment avoidance, and worsening of oral health problems. This study aimed to assess the level of dental anxiety among patients visiting general dental clinics in Babol, Iran.
Materials and Methods: This descriptive-analytical cross-sectional study was conducted in 2020 on 400 patients over the age of 18 who attended private general dental practices in Babol and were selected through convenience sampling. Data were collected using the Persian version of the standard Dental Anxiety Inventory (DAI), consisting of 36 items rated on a five-point Likert scale (score range:
36-180), the validity and reliability of which have been confirmed in previous studies. Data were analyzed using independent samples t-test and analysis of variance (ANOVA) in SPSS, with a significance level set at 0.05.
Results: The mean age of participants was 31.61 ± 9.03 years, and 61.8% were female. The mean dental anxiety score was 129.52 ± 31.04 out of 180, indicating a relatively high level of anxiety among the participants. Dental anxiety was significantly higher in female (P=0.002) and single participants (P=0.007), while no significant differences were observed based on the age, occupation, education level, or number of previous dental visits (P>0.05).
Conclusion: The findings indicated a high level of dental anxiety among patients attending general dental clinics in Babol. It is recommended that educational, psychological, and communication-based interventions be implemented in dental settings to help the reduction of anxiety and improvement of patient care.
Mitra Montazerlotf, Mehrdad Mehrdad Hosseini Shakib, Reza Radfar, Mina Khayamzadeh,
Volume 38, Issue 0 (4-2025)
Abstract
Background and Aims: Dental caries is one of the most prevalent chronic oral diseases worldwide. Timely and accurate diagnosis of dental caries plays a crucial role in preventing lesion progression and reducing complications. This study aimed to systematically review the studies on dental caries detection using machine learning algorithms applied to periapical radiographs.
Materials and Methods: A comprehensive search was conducted in PubMed, Scopus, Web of Science, IEEE Xplore, and Google Scholar databases up to the end of 2024. Inclusion criteria comprised studies using machine learning algorithms for detecting dental caries in periapical or intraoral radiographs. The quality of studies was assessed using the QUADAS-2 tool.
Results: From 825 initial articles, 13 studies met the inclusion criteria. All studies used Convolutional Neural Networks (CNNs) with various architectures including ResNet, VGG, Inception, DenseNet, and YOLO. ResNet-based models and their hybrid variants showed the best performance with diagnostic accuracy ranging from 82% to 98%. Comparison with human experts in 6 studies revealed that deep learning algorithms demonstrated similar or superior performance.
Conclusion: From the results, deep learning especially convolutional neural networks, had significant potential for improving dental caries detection in periapical radiographs. However, challenges such as limited high-quality training data and generalizability issues need further investigation.
Fatemeh Owlia, Mohsen Barzegar, Farinaz Sabaghzadegan, Shima Mosallaei Pour, Zahra Gorji, Kimia Mashayekh,
Volume 39, Issue 0 (3-2026)
Abstract
Ameloblastoma is one of the most common benign tumors originating from odontogenic tissues. Despite being benign, it has a locally aggressive behavior and a high tendency to relapse. While, this tumor is mainly found in the posterior region of the mandible, its occurrence in the maxilla is rare and is associated with more diagnostic and therapeutic challenges. This report presents a rare case of ameloblastoma in the maxilla of a 64-year-old male patient who presented with painless swelling and significant extension of the lesion to the midpalate. Clinical, radiological, and histopathological findings were reviewed and after necessary evaluations, the diagnosis of ameloblastoma was confirmed. The anatomical complexity of the maxilla, proximity to vital structures, and surgical limitations make the management of these tumors more difficult. The present report emphasizes the importance of early diagnosis, careful histological examination, and the need for a multidisciplinary therapeutic approach in dealing with this type of tumor.
Aydin Alipour, Ehsan Moudi, Seyedali Seyedmajidi, Meisam Moradi, Reza Faraji,
Volume 39, Issue 0 (3-2026)
Abstract
ta charset="UTF-8" >
Background and Aims: Root resorption of teeth adjacent to impacted canines, although relatively uncommon, is a potentially harmful condition that may lead to tooth loss. Early diagnosis and the use of accurate imaging techniques play a crucial role in preventing from root resorption complications. This study aimed to evaluate the prevalence of root resorption in teeth adjacent to impacted maxillary canines using cone-beam computed tomography (CBCT) images.
Materials and Methods: In this retrospective observational-analytical study, 60 CBCT images of patients with impacted maxillary canines (15 bilateral case and 45 unilateral cases) were examined using a convenience sampling method among those referred to oral and maxillofacial radiology clinics in northern Iran, Babol, in 2023. Variables such as age, gender, position and direction of canine eruption, presence of root resorption in adjacent teeth, type of affected tooth, severity, and location of resorption were evaluated. Data were analyzed using the chi-square test in SPSS software at a significance level of 0.05.
Results: Among the studied CBCT (66.7% female; 70% over 18 years of age), 75 cases of impaction (41 cases on the right and 34 cases on the left) were observed. Root resorption in the teeth adjacent to the impacted maxillary canines was observed in only 7 patients (11.7%). All resorptions were mild and observed in the lateral incisors. In terms of vertical position, 85.7% of the cases occurred in the middle third of the root. There was no statistically significant association between root resorption and gender, age, or the position or direction of canine eruption (P>0.05).
Conclusion: Given the potential for root resorption in lateral incisors and in the middle third of the root, it is recommended that oral and maxillofacial surgeons and orthodontists perform a thorough initial evaluation of the canine’s position and adjacent teeth using CBCT imaging prior to treatment to prevent possible complications.
Amineh Oljash, Reza Faraji, Farida Abesi, Maysam Mirzaie, Hoda Shirafkan,
Volume 39, Issue 0 (3-2026)
Abstract
ta charset="UTF-8" >
Background and Aims: Ponticulus posticus is a bony anomaly in the atlas vertebra that may have significant clinical implications, particularly when extreme head movements are required during treatment. The present study aimed to evaluate the prevalence of ponticulus posticus in different types of skeletal malocclusions in the population from northern Iran.
Materials and Methods: In this observational-analytical study, 246 lateral cephalometric radiographs of eligible individuals referred to two oral and maxillofacial radiology centers in Babol, northern Iran, in 2021, were included using convenience sampling and evaluated. Skeletal classification was determined using the ANB angle and Wits analysis. The presence of ponticulus posticus was evaluated across different skeletal classes, genders, and age groups. Data were analyzed using the Chi-square test in SPSS software with a significance level set at 0.05.
Results: Among the total sample, ponticulus posticus was observed in 104 cases (42.3%), of which 62 cases (25.2%) were of the partial type and 42 cases (17.1%) were of the complete type. The prevalence of this anomaly was significantly higher in males than in females (P<0.001). However, there was no statistically significant association between the presence of ponticulus posticus and skeletal class (P=0.222) or age group (P=0.483).
Conclusion: The findings of the present study indicated that ponticulus posticus was a relatively common anomaly, with a higher prevalence in males, and therefore should be taken into consideration. However, this anomaly neither appear to be a result of age-related calcification, nor can be used as a predictive indicator for determining skeletal class type.
Amirhosein Rostami, Seyedali Seyedmajidi, Valiollah Arash, Abbas Ramyar, Nima Hedayati Goodarzi, Amirhosein Ghasemi, Reza Faraji,
Volume 39, Issue 0 (3-2026)
Abstract
Background and Aims: Bimaxillary dentoalveolar protrusion (BDP) is a common orthodontic anomaly characterized by protrusive dental arches and lip prominence. Extraction of the first premolars is a frequently employed treatment approach in these patients. However, the effect of this intervention on Bolton ratios-particularly the overall and anterior ratios-remains unclear. This study aimed to evaluate the impact of first premolar extractions on Bolton ratios in patients with BDP.
Materials and Methods: This experimental study was conducted on archived physical models of 34 Class I patients with BDP and functional lip incompetency (>4 mm) accompanied by lip protrusion, available at the Orthodontics Department of School of Dentistry, Babol, in 2024. All patients had a full complement of teeth from the first incisor to the first molar in each quadrant. After digitizing the models, mesiodistal tooth widths and the overall and anterior Bolton ratios were calculated. Digital simulation of first premolar extraction was performed, followed by reassessment of Bolton ratios. Pre- and post-treatment values were statistically compared using paired t-tests in SPSS (significance level set at 0.05).
Results: Among 34 studied casts, 67.6 % belonged to females. The mean overall Bolton ratio decreased significantly from 90.33 ± 2.23% to 87.72 ± 2.39%, and the anterior ratio declined from 78.19 ± 2.96% to 77.85 ± 3.03% (P<0.001). Additionally, 15 patients exhibited residual space post-treatment, primarily in the mandibular arch.
Conclusion: Based on the results of the present study, first premolar extraction significantly reduced both the overall and anterior Bolton ratios in patients with bimaxillary dentoalveolar protrusion. However, the likelihood of residual space—particularly in the lower arch-should be carefully considered during orthodontic treatment planning to ensure long-term stability and success.
Sayeh Hamedanchi, Hafez Vahedpour, Solmaz Charmi,
Volume 39, Issue 0 (3-2026)
Abstract
Background and Aims: Repairing existing composite restorations, rather than replacing them entirely, is regarded as a conservative and tissue-preserving approach in restorative dentistry. However, achieving a durable bond between the aged and newly applied composite resin remains a significant clinical challenge. This study aimed to compare the shear bond strength of repaired composite restorations using three different adhesive systems.
Materials and Methods: In this in vitro study, which conducted at the Faculty of Dentistry, Urmia University of Medical Sciences, 60 disk-shaped composite specimens were fabricated with standard dimensions. After undergoing artificial aging (storage in distilled water for 6 months), their surfaces were roughened mechanically using a diamond bur. The specimens were randomly divided into three groups (n=20) and repaired using fifth-generation (Adper Single Bond), seventh-generation (OptiBond All-In-One), and universal (Single Bond Universal) adhesives, followed by the application of new composite. All specimens were subjected to thermocycling, and the shear bond strength was measured using a universal testing machine. Fracture patterns of the samples were also examined using a stereomicroscope to determine the modes of failure. Data were analyzed using one-way ANOVA and Chi-square tests in SPSS at a significance level of 0.05.
Results: The mean shear bond strengths were 15.22 ± 4.47 MPa for Adper Single Bond, 14.05 ± 4.66 MPa for OptiBond All-In-One, and 13.44 ± 4.68 MPa for Single Bond Universal. No statistically significant differences were found among the groups (P=0.468). Fracture pattern distribution was also not significantly different (P=0.453), with predominantly cohesive or mixed failures observed across all groups. No adhesive failures were observed.
Conclusion: Under standardized surface preparation, none of the tested adhesive systems demonstrated a statistically significant advantage in the shear bond strength between the aged and new composite. Therefore, the choice of adhesive in composite repair procedures can be guided by practical considerations such as product availability, ease of application, and dentist preference.
Vahid Herandi, Fahimeh Rashidi Maybodi, Fatemeh Karamad,
Volume 39, Issue 0 (3-2026)
Abstract
Background and Aims: Given the rapid growth of digital technologies in dentistry, assessing dentists’ awareness and attitudes toward this transformation is essential. This study aimed to evaluate the awareness and attitudes of general dentists in Yazd-Iran toward digital dentistry in 2025.
Materials and Methods: In this descriptive-analytical study, 135 general dentists in Yazd-Iran were selected through convenience sampling. Data were collected via an online questionnaire including demographic information and the questions related to awareness and attitude. Dat were analyzed using SPSS version 27 and the statistical analysis tests were Mann-Whitney, Kruskal-Wallis, and Chi-square to examine the variables.
Results: A total of 59 men and 76 women with a mean age of 31.92 ± 7.87 years participated in the study. The mean knowledge score was 7.76 ± 2.77 out of 12. Higher knowledge and a more positive attitude were significantly associated with older age, longer work experience, and male gender (P<0.05). Overall, 74.1% of participants were unaware of the well-known CAD/CAM system, 74.8% were unfamiliar with digital implant software, and 60% did not have adequate knowledge of correct application of intraoral scanners. While, 81.5% reported an overall positive attitude, only 11.9% considered their knowledge to be aligned with modern digital technologies.
Conclusion: General dentists demonstrated a moderate level of awareness and the existing knowledge gaps warrant greater attention in both undergraduate and continuing education. Enhancing knowledge among specific groups-such as younger, less experienced, and female dentists—is essential. Significant differences in attitudes were observed according to the age, gender, and years of professional experience.
Mogtaba Bayani, Hadiseh Mohammadi, Behzad Khonsarinejad, Dr. Seyed Hamed Mirhoseini,
Volume 39, Issue 0 (3-2026)
Abstract
ta charset="UTF-8" >
Background and Aims: The SARS-CoV-2 virus, capable of airborne transmission through aerosols, poses a significant challenge in clinical settings such as dental clinics. The use of high-speed instruments, including handpieces and ultrasonic scalers, generates considerable aerosols that, if contaminated, may facilitate infection transmission. This study aimed to detect the presence of the SARS-CoV-2 virus in the clinical and non-clinical areas of a dental clinic.
Materials and Methods: In this cross-sectional study, 20 air samples were collected from various sections of the Dental School of Arak University of Medical Sciences. Sampling was performed using a pump equipped with a filter for two hours at a flow rate of 5 L/min and a height of 1.5 m above the floor. The samples were transported under a cold chain, the viral RNA was extracted, and then were analyzed using a specific RT-PCR kit.
Results: Out of 20 collected air samples, 3 samples (15%) tested positive for SARS-CoV-2 RNA. Two from clinical departments (restorative and fixed prosthodontics) and one from a non-clinical area
(pre-clinic).
Conclusion: The findings of this study indicated that SARS-CoV-2 RNA was detectable in some air samples from both clinical and non-clinical areas of the dental clinic. These results highlight the importance of strict adherence to infection control protocols across all sections of dental clinics to minimize the risk of airborne transmission.
