Journal of Dental Medicine

Background and Aims: Reconstruction of osseous defects is one of the ideal goals of periodontal treatments and dental implant therapy. Different biomaterials have been used for this purpose and many studies have tried to compare and introduce the best ones. The present study aimed to evaluate the effect of PDFDB (Partially Demineralized Freeze-Dried Bone Graft) and FDBA (Freeze Dried Bone Allograft) on the regeneration of rabbit calvarial defects.
Materials and Methods: In this experimental study, 48 similar defects with the diameter of 8 mm were generated in the calvarium of 16 rabbits. Two defects were filled with FDBA and PDFDB, while the other one remained unfilled as the control group. All defects were covered by collagen membranes. 6 and 12 weeks after surgery, the histologic and histomorphometric tests were performed to evaluate the following variables: the rate of new bone formation and its type, the amount of residual grafting material, degree of inflammation and pattern of bone formation. Comparison of osteogenesis percentage and residual biomaterial was performed by repetitive variance analysis, whereas qualitative variables were compared by Friedman non-parametric test.
Results: Regarding bone formation percentage, there was no statistically significant difference between three different groups at 6-week (P=0.33) and also at 12-week time points (P=0.98). The amount of residual material in the PDFDB group was significantly lower than FDBA (P=0.04) in the 6-week samples. However, this difference was not significant in the 12-week samples (P=0.41). Bone quality showed statistically significant difference between graft containing groups and control group after 12 weeks (P=0.01). It means, all samples in FDBA and PDFDB groups displayed lamellar bone after 12 weeks while in control group, only woven bone or a combination of woven and lamellar bone was seen.
Conclusion: FDBA and PDFDB demonstrated similar regenerating effect in the rabbit calvarial bone defects and hastened bone maturation compared to the non-grafted defects.

Background and Aims: Erosion is the chemical dissolution of a tooth by acid without bacterial involvement. The purpose of the current study was to investigate the effect of resin infiltration (Icon), MI paste plus, and Nd:YAG laser on the enamel microhardness.
Materials and Methods: 40 enamel samples were obtained from the third molar tooth. Primary microhardness was measured in all specimens. Then, erosion was created using hydrochloride acid on the surfaces of enamel and the microhardness values were measured. The samples were randomly divided into four groups. G1: MI paste plus, G2: MI paste plus+ Nd:YA laser, G3: ICON without etching, G4: ICON with etching. Erosion was induced again by hydrochloric acid and then subjected to thermocycling. Finally, the microhardness of the samples was measured. Statistical analysis was performed using SPSS23 software, one-way ANOVA, multiple Tukey and T-test comparisons. P<0.05 was considered as a significant level.
Results: The microhardness increased in the third stage compared to the second stage in all groups, which was statistically significant (P<0.000). Also, the comparison of the increase of microhardness among groups, except second group with the fourth group, was statistically significant.
Conclusion: All the materials used in this study significantly increased the microhardness of the eroded enamel.

Conclusion: The trend of publishing scientific articles in Iran in the field of dentistry has been increasing during the selected period. The keywords oral, dental, and pediatric surgery have the most effective and decisive role in the scientific network of dentistry. These keywords provided strong scientific communication amongst the dental scholars in Iran.

Conclusion: The data of this study in proving the anti-biofilm and antibacterial effects of aloe vera extract showed that the expression of the target gene is reduced. It seems that this substance can be used as an alternative to oral hygiene chemicals.

Conclusion: The data of this study in proving the anti-biofilm and antibacterial effects of aloe vera extract showed that the expression of the target gene is reduced. It seems that this substance can be used as an alternative to oral hygiene chemicals.

Background and Aims: Knowing the depth and type of the teeth impaction with radiographic approaches can guide the clinicians into selecting the most appropriate treatment and prevent surgical complications. Therefore, the purpose of this article was to evaluate the prevalence of canine and premolar impaction in the digital panoramic view of patients referred to Rasht dental school in 2019.
Materials and Methods: This annalistic-descriptive cross-sectional study comprised patients who attended the Faculty of Dentistry, Rasht, Iran in 2019. Dental records and panoramic radiographs of 500 patients were reviewed retrospectively. Demographic information as well as the type and depth of impaction, involved jaw, and also, the associated pathological lesions were recorded. Data were analyzed with SPSS24 version with significant level of P<0.05.
Results: The findings revealed that among 500 individuals (300 (60%) were females and 200 (40%) were males), 35 individuals (7%) had at least one impacted tooth, 80% of impacted teeth were canines and the others were premolars. The most common impaction type, impaction level, and pathological lesion were mesioangular, B, and carries of the adjacent tooth, respectively. A significant relation was not observed between the type and level of impaction with the involved jaw (P=0.15, P=0.99) and also, the relation between the type of pathological lesion and gender was insignificant (P=0.85).
Conclusion: Functional and esthetic complications of impacted tooth can be prevented or declined by on-time radiographic screening.

Background and Aims: The need to use a highly effective sealer in order to create a complete seal along the canal is essential for the basic treatment of tooth roots. Therefore, the aim of this study was to investigate the sealing ability of cold ceramic and gutta-percha with sealer by applying the bacterial leakage and electrochemical method.
Materials and Methods: In this in-vitro experimental study, fifty human single-rooted teeth were selected and their crowns were cut from the cervical region. The canals were prepared and washed with 17% EDTA. Then the teeth were randomly divided into four groups: group 1 gutta-percha with AH26 sealer (Dentsply Detrey, Germany) (n=20), group 2 cold ceramic (Yazd, Iran) (n=20), negative and positive control groups which each consisted of 5 teeth. Samples were kept in an incubator at 37° C for 48 hrs. Two coats of nail polish were used for covering the root, except for the last 2 mm, and microleakage in the fillings was measured by the bacterial leakage and electrochemical methods. The microleakage of the two groups was statistically analyzed in the electrochemical technique by Student's t-test, and in the bacterial leakage method by Fisher's exact test.
Results: In bacterial leakage method, in the first group (gutta-percha) 7 samples (35%) and in the second group (cold ceramic) 3 samples (15%) had bacterial leakage, but no significant difference was observed between the two groups on different days (P>0.05). The mean microleakage based on the electrochemical technique in gutta-percha was significantly higher than that of cold ceramic (P=0.0001).
Conclusion: According to the lower microleakage values in the use of cold ceramic compared to gutta-percha, cold ceramic  can be used to fill root canals to reduce microleakage, although further studies are needed.

Background and Aims: Finishing and polishing of composites is a critical step influencing the clinical service of restorations. The aim of this article was to evaluate and compare the effect of two liquid polishes on the polish retention of two nanocomposites.
Materials and Methods: Eighty standardized disk-shaped specimens (4×2 mm) were prepared from two nanocomposites (n=40), including one nano-filled composite (Filtek Z350 XT-3M ESPE, USA) and one nano-hybrid composite (Aelite Aesthetic Enamel-Bisco, Inc. Schaumburg, USA). The specimens were randomly divided into 4 subgroups (n=10) based on the method of finishing (F) and polishing (P) procedures: M: as control, polymerized under Mylar strip; S: finish and polish with a sequence of Sof-Lex discs (3M ESPE, USA); SP: finish and polish with Sof-Lex discs and use of Permaseal liquid polish (Ultradent products, Inc. USA); SB: finish and polish with Sof-Lex discs and use of Biscover liquid polish (Bisco, Inc. Schaumburg, USA). The specimens were undergone pH cycling and brushing machine and then, the average surface roughness (Ra) and average profile changes along the desired area (Rz) of the specimens were determined with profilometer instrument. Two-way and one-way analysis of variance (ANOVA) was used to compare the mean of surface roughness. Then, Tukey test was used to identify the groups responsible for the difference and t-test was used to compare the mean of surface roughness.
Results: The type of composite and the method of polishing procedure had no effect on the mean Ra (P=0.733) but it had significant effect on Rz1 factor (P=0.025).
Conclusion: Using liquid polish after polishing discs had no effect on the polish retention of nanocomposites.

Background and Aims: The aim of this study was development and validation of a questionnaire measuring the pseudo-scientific unsupported of Iranians’ belief regarding oral health.
Materials and Methods: A list of 169 pseudo-scientific and invalid Iranian beliefs about oral health that was collected in the previous phase of the study were sent to a purposive sample of 13 professors at Mashhad dental school which resulted in extracting 34 beliefs being considered more common among Iranians. A list of 21 pseudo-scientific beliefs was obtained for preparing the questionnaire after receiving the sample opinions of 21 professors of Mashhad dental school about the invalidity and pseudoscientific propositions and their written revision. Finally, the questionnaire was completed by 44 participants to analyze the ease and clarity and to calculate Cronbach's alpha and Kuder Richardson measure as a homogeneity reliability index. It was completed in a group of 15 participants with a time interval of one month for test-retest analysis and consistency reliability evaluation.
Results: A questionnaire consisting of 21 beliefs was developed using four-point, three-point, or two-point Likert scales. The standardized Cronbach's alpha score and Kuder Richardson's measure score were 0.641 and 0.514, respectively, which indicated the moderate to good reliability of the homogeneity. The Interclass Correlation Coefficient (ICC) was calculated as 0.863, representing very good reliability of consistency of the questionnaire. Furthermore, the kappa coefficient of each of the 21 statements had a significant difference with zero (P<0.05) ranging between 0.605 and 1.
Conclusion: The result of the present study is a questionnaire measuring the level of Iranians’ belief in unsupported and invalid statements about oral health. Using this questionnaire would be helpful for dentists and oral health professionals to promote knowledge of Iranians about oral health.

Background and Aims: The aim of this study was to investigate the tooth discoloration caused by cold ceramic compared to MTA Angelus in contact with the washing solutions such as sodium hypochlorite (NaOCl) and normal saline.
Materials and Methods: 50 samples of extracted human maxillary anterior teeth were selected. After preparing the access cavity, they were divided into 4 experimental groups and 1 control group (10 in each group). The access cavities of teeth in groups 2 and 4 were rinsed with 5.25% sodium hypochlorite and those in groups 1 and 3 were rinsed with normal saline. Then, after drying, 3 mm thickness of cold ceramic (groups 1 and 2) and MTA Angelus (groups 3 and 4) were placed in the access cavities of the teeth. After setting of the materials, all specimens were restored with a resin modified glass ionomer. Based on the CIE Lab system, each sample’s total color change (∆E) was obtained before, one, and 90 days after application. Data were statistically analyzed using the Wilcoxon test.
Results: According to the results, there was no statistically significant difference in the average tooth discoloration between the groups filled with cold ceramic and in different time periods (P>0.05). While, in the groups filled with MTA Angelus, the difference in the average tooth discoloration in 90 days after application was significantly higher than one day (P<0.05).
Conclusion: The results of this study showed that compared to MTA Angelus, cold ceramic causes less tooth discoloration over time and therefore, it can be suggested as a more suitable alternative endodontic cement than MTA Angelus.