Journal of Dental Medicine

Background and Aims: Cancer is the second most common cause of death in developed countries. The goal of this study was to determine the important epidemiologic factors affecting diagnosis and survival rate of patients with laryngeal SCC, for prevention, control and increase longevity.
Materials and Methods: In this study, all the cases recorded at the Center of Cancer Office of the Iran Ministry of Health in Tehran between 2005-2009 were examined. From 513 cases, 279 that their follow-up was possible by phone or postal address were included in the study. Data collection were performed from questionnaire. The data were analyzed by SPSS version 20. The Kaplan Meier survival curves were utilized and, moreover, the corresponding influential factors were examined by using the Cox regression test.
Results: The mean age of patients were 61.1 years (SD=10.54). The gender of 92.1% of patients were male. The most widely used method for the treatment was a combination of three methods of surgery, radiation therapy, and chemotherapy. The overall five-year survival rate was 75.7% (SD=0.03). The gender, histological differentiation, and professional delay did not exhibit a statistical correlation with the survival rate (P=0.38, 0.14, 0.52), whereas the age and patient delay had a statistically significant relation with the survival rate (P=0.03, 0.07).
Conclusion: The survival rate was lower in older patients. Patient and professional delays were high, which need more attention for improving the quality of life.
 

Background and Aims: The aim of this study was to assess the outcome of short implants (<8 mm length) as an alternative to sinus lift surgery and placement of standard-length implants (10-12 mm length) for rehabilitation of atrophic posterior maxilla.
Materials and Methods: In this prospective clinical trial, 26 patients with 6-7 mm of residual alveolar bone height in their atrophic posterior maxilla were randomly divided into two groups (n=13). The test group received short implants without sinus lift surgery while the control group received standard-length implants after maxillary sinus floor augmentation. The bone loss was evaluated at 1 to 2 years after loading of implants on radiographies and the comparison between the two groups was done using chi-square test.
Results: At 1 year, two patients (15.4%) in the short implant and one patient (7.7%) in the standard implant group experienced bone loss (P=0.5). At 2 years, four patients (30.8%) in the short implant and two patients (15.4%) in the standard implant group showed bone loss (P=0.4).
Conclusion: At 2 years after loading, the bone loss was not significantly different around short and standard-length implants. Short implants appeared to be a suitable alternative to sinus lift surgery and placement of standard-length implants for rehabilitation of atrophic posterior maxilla. However, further studies with longer follow ups are still required to cast a final judgment in this respect.

Background and Aims: Diferences whithin shape and size of hand wrenches in diferent systems could affect the torque applied. Therefore, evaluation of wrenches has been emphasized. The aim of the present study was to compare the torque values of the long and short torque wrenches in different implant systems including ITI, Implantium and Nobel Biocare.
Materials and Methods: In this experimental trial, 5 dentists with at least 5 years of professional experience closed the abutment screw in different implants systems using the long and short manual wrenches while the wrench-induced torque values were calculated by digital torque-meter. Torque application was done for 3 times with 10-minutes resting time between each wrench uses in the habitual closing torque manner. Data were analyzed using two-way analysis of variance test in different implant systems, while the paired comparisons were done using Tukey post hoc test.
Results: The maximum torque values of the long manual wrenches were 27.73±4.57 Ncm, 34.6±8.09 Ncm and 30.6±6.94 Ncm for the ITI, Implantium, and Nobel Biocare systems, respectively. While the values were reported to be 26.4±5.3 Ncm, 35.27±7.94 Ncm and 30.13±5.26 Ncm in the short manual wrenches for the ITI, Implantium and Nobel Biocare systems, respectively. Significant differences were found between ITI and Implantium (P<0.0001), and between Implantium and Nobel Biocare systems (P<0.021). However, no significant differences were observed between ITI and Nobel Biocare systems regarding wrench-induced torque values (P>0.05).
Conclusion: From the results, the torque values obtained by different long and short manual wrenches were specific to different implant systems. These values were less in ITI and Nobel Biocare systems and higher in implantun than those range provided for the implant systems by the companies.

Background and Aims: Gypsum products are used for several different purposes. Adaptation and success of casting restorations are dependent on dimensional accuracy, strength, and reproduction of details of dental gypsums. This study was designed to evaluate the dimensional changes and accurate details reproduction of three type IV dental gypsums.
Materials and Methods: 60 samples in 3 groups of dental gypsums of G30,Yeti Rock and FujirockEP were evaluated. The detail reproduction of 50 micron scratched line was analyzed by a microscope at 12× magnification. The samples were assayed for dimensional changes at 2 and 24 hours and 1 week after pouring. Photograph images were taken from samples in fixed distance by a camera (Canon D600) and analyzed in corel draw software. Data were analyzed using ANOVA and chi-square (P<0.05).
Results: There were significant differences in the details reproduction between three gypsums (P≤0.05) and the highest values was for Fujirock EP, Yeti Rock. The G30 did not reconstruct the details. There was no significant difference in the dimensional changes of the evaluated gypsums based on time (P≥0.05).
Conclusion: All three different gypsums evaluated in this study showed the dimensional stability during one week. Fujirock EP and Yeti Rock could reconstruct the details and G30 gypsum could not.

Background and Aims: Interest and satisfaction of students toward their field of study has important role in knowledge promotion, future activities, and also healthcare of country. This study aimed to evaluate the attitude of dental students toward their field of study and also their future career.
Materials and Methods: This cross-sectional descriptive study was based on a standardized researcher designed questionnaire in 2018. Demographic data was collected and questions were based on the attitude of students toward their field of study and their future. ANOVA and Backward stepwise regression methods were used for statistical analysis. Significance level was determined at 0.05.
Results: In this study 62.2% of responders were female and 37.8% were males. Students chose dentistry under the influence of following matters consecutively: high income, recommendation of people around and self-interest. Girls compared to boys, were significantly influenced more by self-interest and also had more interest compared to boys for working in dentistry (P<0.05). Also, most of students were anxious about the increase in the number of dental students.
Conclusion: Students had positive attitude toward their field of study and their future. They were interested in working in this field but factors such as not having enough familiarity toward this field and also an increase in the number of students in recent years created some worries for them.

Background and Aims: Providing quality services is one of the important goals of the health system. Dental services and treatments are expensive. The aim of this study was to investigate the factors influencing the perceived quality of dental treatment services.
Materials and Methods: This descriptive-cross study conducted in 2 qualitative-quantitative phases. Data were collected using interviews and pairwise comparison matrix with 20 dentists working in NAJA dental clinics who were selected by targeted sampling. The validity and reliability of the interviews were determined by long-term engagement of their peers and negative case analysis. The validity of the pairwise comparison matrix was determined through the incompatibility rate (>0.1). Data were analyzed by coding and effect intensity tests (R+J), descriptive statistic test (mean, standard deviation) using SPSS23, Maxqda and matlab R2017b.
Results: Content analysis of the interview showed that tangible factors, assurance, trust, and empathy are the factors affecting the quality of dental treatment services. In the second phase, data analysis showed that trust and empathy (28.204), assurance (24.356), and tangible factors (17.798) are the most to the least important factors in the quality of dental treatment services (P=0.1).
Conclusion: Trust and empathy were the most important factors in the quality of dental treatment services. Managers of dental clinics and dentist need to improve the quality of dental treatment services by emphasizing respect for patients in accordance with the promise to act in the field of providing treatments to patients.

Background and Aims: Human ergonomics or engineering with proper design and change of work and requirements creates the most productivity based on human physiology. The purpose of this study was to determine the level of awareness of dental students of Isfahan University of Medical Sciences about the basic principles of ergonomics in dentistry.
Materials and Methods: In this descriptive-analytical, sectional study, a questionnaire containing 10 questions was distributed and completed by easy sampling method among 74 final year students of the general doctorate of Isfahan school of dentistry. After collecting the questionnaires, the students were given an educational pamphlet. To evaluate the questionnaires, each correct answer was given a score of one and the wrong answers were given a score of zero. Data were analyzed by T-test, Kai Square, and Mann-Whitney statistical tests using SPSS23 software. P<0.05 was considered as a significant level. P<0.05 was considered as a significant level.
Results: The average score of the knowledge of principles of ergonomics was intermediate (6.23±1.25). Student knowledge was not significantly different based on the student gender (P=0.25) and academic semester (P=0.059). Also, 55% of students had a history of muscle pain that did not have a significant relationship with gender (P=0.258) and average score of the knowledge (P=0.288).
Conclusion: Unfortunately, ergonomics cannot be considered part of the principles of dental education and even later. Musculoskeletal pain is one of the most common complaints of dentists and is a factor in reducing their quality and function. Therefore, it seems that training and evaluation of ergonomic principles in dental education is necessary.