Showing 25 results for Mohammadi
E. Yasini , N Mohammadi ,
Volume 14, Issue 4 (10 2002)
Abstract
Posterior composite restorations, due to polymerization contraction, result in microleakage. Different methods have presented to reduce this phenomena. The aim of this study is to evaluate the effects of flowable and condensable composites to reduce microleakage. Seventy extracted human teeth were prepared with proximal class II cavities with gingival margin 1 mm below CEJ. The teeth randomly were divided into 7 groups. Groups I & II were restored with a dentin bonding (DB) agent plus a Prodigy condensable (Kerr Co.) composite, placing incremental or bulky, respectively.. In groups IK IV, V a dentin bonding agent was applied and then cavities were restored with Tetric flow composite resin as a base plus either a hybrid composite (Tetric ceram, Vivadent Co.) or a Prodigy condensable composite (Cond), placing bulky or incremental. Groups VI and VII were restored with a resin modified glass ionomer (GI) (Fuji II Lc Co.) as a base plus either Prodigy condensable or Tetric ceram. Restorations were polished, thermocycled, and immersed in 0.3% basic fushin. After that samples were sectioned and studied under a stereomicroscope to evaluate dye penetration. Results showed that all restorations showed some degree of microleakage and according to kruskall- wallis statistical analysis, there were not any significant differences between all groups (P-0.051). Then fore pair comparison, between groups. Mann-Whitney analysis was used and no statistical difference was observed. However. Gh DB- Tetric group showed the least microleakage and DB+ Cond (bulk) the most one. Due to lack of an" statistical difference among different materials methods, it is concluded that no method or restorative material have been able to eliminate microleakage in margins completely yet, and using a flowable composite resin, in place of resin modified glass ionomer or using a condensable composite, instead of conventional In brid composites, do not have any effect
N. Takzaree , K. yarmohammadi , Ar. Takzaree , H. semiyari. , M. Akbari ,
Volume 14, Issue 4 (10 2002)
Abstract
Pain reduction and surgical wound healing enhancement have several advantages. Wound healing is a complex and organized phenomenon. During this phenomenon, definite and harmonized processes such as: reconstruction, immigration parenchyma and connective tissue cells proliferation and re-construction of gingival connective tissue take place. Studies show that lower power laser (He-Ne) can induce different biological changes in ceils through biochemical mechanisms. Considering the therapeutic effects of (He-Ne) low power laser radiation on healing processes, cell proliferation, connective tissue fibers and finally the acceleration of gingival wound healing were studied. This study was done on 50 mature and healthy rats with the average weight of 250 to 300 grams, and 3 to 4 months old. After anesthesia, maxillary wounds, with the same size, were made in all samples and they were randomly divided into control and test groups. After surgery, rats of test group received laser radiation with the value of 5 mJ/cm3 every day for a period of 5 days. And on the 5lh day, they were killed. Gingival biopsy was performed and histological study was done. The number of fibroblasts, collagens, endothelial ceils and blood vessels were counted. In test group, the granulation tissue was more active and the edema and inflammation were lesser than those of the control group. Data were analyzed by t-test method and PO.05 was significant. So, it is concluded that periodical radiation of (He-Ne) low power laser has an important role on surgical gingival wounds.
A. Ebadifar , Mr. Mohammadi , N. Valaee ,
Volume 18, Issue 4 (5 2006)
Abstract
Background and Aim: Compared to the information about educational responsibilities, there is not much information about the research skills and activities of the academics in dental schools. The aim of this study was to evaluate the research performance of the academic staff of the dental schools and their educational needs to promote their research skills.
Materials and Methods: This cross-sectional study was done by mailing a questionnaire to all of the members of Iran dental faculties. The questionnaires contained personal information like age, sex, place of employment, educational records, and additional questions like the workshops previously attended, and interests to attend certain workshops. To evaluate the research performance of the academic staff, the number of accomplished researches, the articles published in known national and international journals, their skills in using internet, and the number of attended workshops about research methodology were included in the questionnaire. The completed questionnaires were gathered and evaluated by descriptive statistics.
Results: From the questionnaires gathered, 436 were eligible to be included in the study, which formed 58% of the academic staff of dental schools. The results showed that 7.4% of the staff had more than 10 researches conducted, 15% had 5-10, 49.9% had less than 5, and 27.7 had no researches done. Considering the articles published in known national journals, 28.2% had no papers, 51.8% had 1-5 papers, and 20% had more than 5 papers. Regarding the number of articles published in known international journals, 77.5% had no papers, and 20.2% had 1-3, and 2.3% and more than 3 papers. The "preliminary research methods" workshop had the highest percent of participation (71.6%), and "Stata acquaintance" workshop had the least (0.7%). The participants were mainly interested to participate in three workshops, "English scientific writing" (26.3%), "principles of scientific writing" (17.5%), and preparing research proposals" (16.2%), respectively.
Conclusion: We concluded that the research skills and performance of the academic staff, though improved in the recent years, is still unsatisfying. In order to promote it, it is recommended to organize workshops about "research methodology", "scientific writing" and "preparing of proposals"
S. Bayat Movahed , Y. Soleymani Shayesteh , H. Mehrizi , Sh. Rezayi , M. Mohammadi , K. Bamdad Mehrabani , M. Koohkan , B. Golestan ,
Volume 20, Issue 1 (4 2007)
Abstract
Background and Aim: Qigong is a type of Chinese psychosomatic exercise that integrates meditation, slow physical movements, and breathing. Numerous physical and mental benefits have been classically ascribed to qigong. On the other hand, unstimulated saliva is thought to play an important role in oral immunity, enamel stability and moisturizing the oral mucous membrane. Impaired salivary secretion leads to dental caries, mucosal deterioration and mouth dryness. The aim of the present study was to analyze the effect of a qigong program on various parameters of saliva such as quantity of unstimulated saliva, pH and SIgA.
Materials and Methods: Twenty three subjects participated in this clinical trial study. The experimental subjects underwent a qigong training program, conducted by a qualified instructor. The program consisted of half an hour daily practice for 6 months (spring and winter). Saliva was collected in two periods: once during the spring before the experiment commencement and the second, in the following spring. During each period saliva collection was done on tuesday of each week. pH and quantity of salvia measurements were taken simultaneously. SIgA measurements were also taken based on the values obtained in the last phase of the experiment at the end of each spring. The results were analyzed using paired sample T test, one way repeated measure and Bon Ferroni multiple comparison. P<0.05 was the level of significance. Results: Based on our findings, the change in the amount of unstimulated salvia as well as SIgA was statistically significant (P<0.001) however, there was no significant difference in pH values before and after experiment.
Conclusion: These findings demonstrate that after 6 months of practicing qigong, significant changes in amount of unstimulated saliva and SIgA occurred in participants. The authors suggest that qigong may be a beneficial adjunctive treatment that enhances amount of unstimulated saliva and SIgA.
Sh. Zadeh Modarres , B. Amooian , S. Bayat Movahed , M. Mohammadi , L. Sheikholeslam , F. Sheikholeslam ,
Volume 20, Issue 1 (4 2007)
Abstract
Background and Aim: Low birth weight is a significant public health issue. Recent studies have suggested periodontal diseases as risk factor for preterm labor. The aim of this study was to assess the relation between gingival health and preterm labor in a sample of Iranian female population.
Materials and Methods: In this cross sectional study, 201 pregnant women without any systemic diseases or other risk factors like psychotic conditions were selected. Ninety-nine of them had term labor (infant≥37 weeks) and 102 had preterm labor (infant<37 weeks). Bleeding index, pocket depth and debris index were measured. Data were analyzed by Chi-square and Mann-Whitney tests with p<0.05 as the level of significance.
Results: Bleeding index, probing depth and debris index showed statistically significant differences between preterm and term labor mothers (P<0.001).
Conclusion: According to the findings of this study, there is a significant relationship between gingival health and duration of pregnancy. Consequently, periodontal diseases could be risk factor for preterm labor. Oral hygiene is strongly recommended to be included in pregnancy health programs.
M. Tabrizizadeh , H. Zandi , Z. Mohammadi , A. Molana ,
Volume 20, Issue 3 (4 2007)
Abstract
Background and Aim: Incomplete root development caused by trauma ,caries, or pulpal pathosis requires special attention and treatment . Although calcium hydroxide apexification has been used successfully for years but it requires patient cooperation and multiple appointments . Single visit apexification with MTA has been used in recent years. The purpose of this study was to compare bacterial microleakage of two types of MTA (Made in Iran and Brazil) applied as apical barrier in open apex teeth.
Materials and Methods: 48 single root teeth were used in this experimental in vitro study. Teeth apices were prepared as open apex teeth. For canal obturation the 4mm of root end was filled with 2 types of MTA (white Iranian MTA salami co. Iran and Angelus MTA Angelus Brazil) from coronal access. Teeth were mounted in self-cured acryl and put in BHI microbial culture. A suspension of Staphylococcus epidermidis was injected from coronal area into the root canals.The teeth were incubated and examined every 24 hours for microbial microleakage, indicated as turbidity in culture. Data were analyzed using Fisher exact test with p<0.05 as the level of significance.
Results: Microleakage appeared after 15 days in all Iranian and after 17 days in Angelus MTA samples.There was no significant difference between microleakage of two types of MTA (P = 0.48).
Conclusion: Based on the results of this study, there was no significant difference between microleakage of Iranian and Angelus MTA. If further studies confirm other physical, chemical, biological and sealing properties of Iranian MTA, it could be recommended for clinical application
M. Tabrizizadeh , Z. Mohammadi , Mj. Barzegar Bafruyi ,
Volume 20, Issue 4 (5 2008)
Abstract
Background and Aim: Sealing the root canal system is of great importance in endodontic treatment especially in infected teeth. Several materials have been introduced for this purpose. The aim of the present study was to evaluate the sealing ability of MTA as an orthograde root filling material and compare it with laterally condensed gutta-percha with sealer.
Materials and Methods: Thirty-six extracted human maxillary central and canine teeth were used in this experimental study. After preparation and surface disinfection with 1% NaOCl solution, the crowns of the teeth were cut at cemento-enamel junction.Roots were randomly divided into four groups: two experimental groups of 15 roots each (gutta-percha with AH26 sealer and MTA) and two control groups of 3 roots each (positive and negative). After root canal preparation and filling, the sealing ability of each technique was assessed by immersion in 1% methylene blue dye for 72 hours. Then the teeth were cleared and the extent of dye penetration was measured with a stereomicroscope. Data were analyzed by T-test with P<0.05 as the level of significance.
Results: The results showed that the mean microleakage was 1.1mm (SD=2.1) in the gutta percha group and 3.4mm (SD= 2.1) in the MTA group.This difference was statistically significant (P=0.013).
Conclusion: Based on the results of this study, canal obturation with gutta-percha and AH26 sealer may provide a better apical seal compared with MTA. However, further studies on microbial leakage are needed for more precise evaluation of the sealing ability of MTA.
M. Mehran, M. Mohammadi Bassir, S. Jafari ,
Volume 21, Issue 4 (19 2009)
Abstract
Background and Aim: Black staining after taking iron drops on the primary teeth is always concern of parents. There is not an exact explanation for the mechanism of iron black staining. The purpose of this study was to compare tooth discolorations, atomic absorption and structural changes of primary teeth enamel caused by two kinds of iron drops[ Kharazmi(Iran) and Fer-in-sol(USA)].
Materials and Methods: In this ex-vivo study, 93 sound primary teeth in normal color range were divided into five groups. Two groups of samples were immersed into the Artificial Caries Challenge(ACC) for two weeks before getting exposured to iron drops: Group 1 Control(NS): sound enamel teeth which were kept in Normal Saline environment(NS)(13teeth). Group 2 (NS-KH): NS, kharazmi iron drop (20 teeth). Group 3 (ACC-KH): ACC, Kharazmi iron drop (20teeth). Group 4 (NS-F-in-S): NS, Fer-in-Sol iron drop (20teeth). Group 5 (ACC-F-in-S): ACC, Fer-in-Sol iron drop. Visual tooth discolorations were determined by a specialist in operative dentistry who was not aware of experimental groups. The iron concentration was measured by ICP system (Vista-pro, Australia) and the structural changes were studied by SEM (Philips, Netherland). The data of discoloration were studied with Kruskal-Wallis test and multiple comparison using Bonferroni type test, and with the data of atomic absorption were studied with oneway ANOVA test and Tukey HSD test.
Results: The discoloration in the teeth immersed into the ACC (ACC-KH, ACC-F-in-S) was more severe than the sound enamel surface (NS-KH, NS-F-IN-S) (p<0.001) and Kharazmi iron drop caused more discoloration in the teeth immersed into the ACC (p=0.018). The teeth immersed into the ACC, absorbed more iron than the sound enamel surface (p<0.001) and also the teeth immersed into the ACC absorbed more Kharazmi iron drop (p<0.001). In the Scanning Electron Microscopy study, at low magnification in the sound teeth the perikymata was arranged regular. At low magnification in the teeth immersed into the ACC, many fractures were observed. The fractures in group 3(ACC-KH) were more and deeper.
Conclusion: Being immersed into the ACC, caused more iron absorption, severe discoloration and structural changes in the enamel of primary teeth. Such changes were more distinct in the teeth exposed to Kharazmi iron drop than the teeth exposed to Fer-in-Sol iron drop.
F. Ezoddini Ardekani, Z. Mohammadi, Z. Hashemian, M. Sadrbafghi, A. Hedayati, Mj. Rahmani Baghemalek,
Volume 22, Issue 1 (11 2009)
Abstract
Background and Aim: Dental pulp calcification may have the same pathogenesis as vascular calcifications. Pulp stones are calcified mass, which are commonly observed in usual dental radiographs. The purpose of this study was to evaluate the relationship between pulp stones and ischemic CVD.
Materials and Methods: This was a cross-sectional descriptive-analytic study on 20-25-year-old patients who had at least 8 intact teeth and were referred to Afshar hospital for cardiovascular examinations. Relationship between vascular stenosis and dental pulp stone was explored.
Results: Sixty one patients who had undergone angiography were studied. They included 32 male (52.5%) and 29 female (47.5%). 38 patients had at least one stenotic vessel (from one to three vessels) and the others (37.7%) showed normal angiographic findings. 73.8% (31 cases) of the patients with dental pulp stones suffered from coronary narrowing where as only 36.8% (7 cases) of the patients without dental pulp stones showed coronary vessels narrowing. Pulp stones were mostly seen in first and second Molar teeth.
Conclusion: According to the results, we can state that oral and maxillofacial radiology is helpful in screening of cardiovascular diseases.
A. Jafari, Mr. Khami, R. Yazdani, M Mohammadi,
Volume 22, Issue 4 (21 2010)
Abstract
Background and Aims: The objective of the present study was to investigate knowledge and attitude of senior dental students towards HIV/AIDS. Its result could help in promotion of education.
Materials and Methods: This educational research was carried out in two state dental schools in Tehran. The senior dental students in Tehran and Shaheed Beheshti dental schools were asked to fill in a self-administered questionnaire regarding their age, gender, parents' job, knowledge and attitudes towards treatment of patients with HIV/AIDS in Autumn semester 2007. Fifty five dental students (83%) including 27% male and 73% female in Shaheed Beheshti and fifty five dental students (85%) including 34% male and 66% female in Tehran dental schools were participated. The score for knowledge and attitude of the students were calculated separately. The data were analyzed using Independent sample t-test.
Results: The mean percentage of knowledge and attitude scores were 76.5% (at rang 1-3) and 50% (at range 1-5), respectively. Nearly all of the students believed that all patients should be considered as HIV positive in dental practice, while 49% preferred to refer HIV positive patients. Knowledge and attitude of students were not significantly associated with the gender and knowing HIV positive person (P>0.05).
Conclusion: There is a need to improve knowledge and attitudes of dental students towards HIV/AIDS. It is suggested to emphasize on this subject in dental schools curriculum in Iran.
Marzieh Alikhasi , Razieh Khanmohammadi, Somayeh Niakan ,
Volume 26, Issue 3 (8-2013)
Abstract
Background and Aims: Along with the advances in dental materials and invention of new techniques for ceramic producion, the demand for the beauty and matching restoration’s color with patient’s natural teeth is growing. Nowadays, zirconia systems are the focus of attention. Despite their strength, one of the problems with such systems is the high opacity and failing to provide the favored color. Considering few studies about the influence of shading on Zirconia, the purpose of this in vitro study was to evaluate the effect of different shading of zirconia-based ceramics on the biaxial flexural strength .
Materials and Methods: In this in vitro experimental study, Rainbow (Dentium, Korea) zirconia-based ceramics (the diameter of 15mm and 1mm in thick) were divided into four groups of 10 specimens. According to Vita shade guide system and manufacturer’s time recommendations (3 seconds), three groups of disc specimens were shaded to A3, B3 and D3 colors and other ten specimens remained uncolored as control group. The biaxial flexural strength test of discs was evaluated and the elements’ composition of colors was detected by Energy Dispersiue X-ray Microanalysisd (EDX). Finally, data were analyzed using one-way ANOVA and Post-hoc tests.
Results: The biaxial flexural strength in non colored specimens, A3 shaded discs, B3 shaded, and D3 shaded specimens were determined 1061.93, 819.16, 1100.10, and 825.48 MPa respectively which was statistically significant among groups (P<0.001). The statistical analysis revealed that the highest strength in B3 and non colored groups which were significantly higher than A3 and D3. EDX analysis showed significant differences among different colored compositions.
Conclusion: The biaxial flexural strength of zirconia cores are affected by shading and the specific selected color.
Davari Abdolrahim , Kazemi Alireza Danesh , Mousavinasab Majid , Mohammadi Najmeh Pour ,
Volume 26, Issue 3 (8-2013)
Abstract
Background and Aims: Different adhesives with different solvents may have different solvent evaporation rates. The purpose of this study was to evaluate the solvent evaporation in the self etch and total etch adhesive in different air drying times.
Materials and Methods: Five adhesives were used in this study: Excite, Prime & Bond NT, UNO, Single Bond, SE Bond Primer. Twelve drops of each adhesive were used for each period of air drying (5, 15, 30 sec). The percentage of mass loss was measured during each test. Data were analized using two-way ANOVA and Tukey.
Results: Acetone base adhesives showed more loss of mass than other adhesives (P<0.01). P&B NT showed more loss of mass than other adhesives in all air drying times (P<0.01). Adhesives showed different evaporation rates in different air times (P<0.01).
Conclusion: Adhesives with acetone/water or alcohol/water solvent shows more stable behavior in comparison with adhesives containing pure aqueous solvents.
Gholamreza Esfahanizadeh, Mahmood Aghel, Saeed Mohammadi Asl, Elnaz Bayat,
Volume 30, Issue 4 (1-2018)
Abstract
Background and Aims: Marginal gap measurement in all ceramic restorations they are of fundamental important for the successful used. As some studies led to contradiction results, yhe aim of this study is to compare marginal gap restorations between 4 kinds of ceramic restorations Inceram, IPS-e.max Press, Zirconia (CAD/CAM) and PFM.
Materials and Methods: In this In-vitro experimental research, one stainless steel die with deep chamfer finish line design (1 mm depth) was prepared on a maxillary premolar. 40 epoxy resin dies were made, dies were divided in to 4 groups (n=10), Zirconia, IPS e.max press, Inceram, Mental Ceramic systems (MC). Then, the prepared crowns were put on the stainless steel die and observed their marginal mismatch under sterio microscope before cementation. Data were analyzed by One- way ANOVA, and one sample kolmogorosmirnov tests.
Resultes: There was significant difference in the marginal gaps between (MC) (102.92±28.7), Inceram (98.41±24.91), IPS e.max press (128.22±25.48), and Zirconia (69.5±10.9) (P=0.0001).
Conclusion: The comparison of marginal gap for the four groups was significant test. Therefore, it can be concluded that marginal gap, the probability of leakage and recurrence of caries in Zirconia systems is the least and in the IPS e.max press systems is the most.
Mandana Khatibi, Arash Azizi, Abbas Kamali, Soheila Mohammadian,
Volume 31, Issue 2 (9-2018)
Abstract
Background and Aims:The erosive and ulcerative forms of Oral lichen planus causes pain and irritation, affects the nutrition and biological quality of the patient. Considering the high prevalence of the disease, the complications of conventional treatments and the resistance to classical drug therapy, the aim of this study was to compare the effect of infrared low level laser and triamcinolone acetonide mouth rinse on treatment of oral lichen planus lesions.
Materials and Methods:In this double blind clinical trial, 24 patients were selected randomly according to the inclusion and exclusion criteria and divided into two groups of 12. Before and after the study, pain and burning sensation index (VAS), apparent shape and score of the lesion and size of the lesion were recorded in the patients. We treated the first group with low level infrared laser (810 nm) twice a week with 0.5-2 j/cm2 energy density and 300 mW/cm2 power density up to a maximum of 10 sessions. For the second group, we prescribed a mouth rinse of triamcinolone acetonide 0.2% four times a day with antifungal drugs for a month. Then, the study`s criteria were recorded after the completion of treatment. All data were statistically analyzed using the repeated measure ANOVA test to compare the quantitative changes over time, The Mann-Whitney U test was used to compare the rank variables between two groups at any time and Friedman test for each group between different times.
Results: There was no significant difference between the groups in terms of severity of pain (P=0.255), score and size (P=0.186), and appearance (P=0.178) of the lesions among two groups. Although the two groups showed a significant decrease in all three indicators.
Conclusion:Considering that in both groups, all three indices were improved and these improvements were similar, it seems that laser therapy can be effective. It could be used as a therapeutic alternative in treating patients with OLP (Oral Lichen Planus) especially in cases with contraindication in corticosteroid administration or lack of appropriate therapeutic response or when there is resistance to treatment.
Somayeh Hekmatfar, Sahar Mousavi, Hamed Mohammadian, Karim Jafari,
Volume 32, Issue 2 (10-2019)
Abstract
Background and Aims: Gypsum products are used for several different purposes. Adaptation and success of casting restorations are dependent on dimensional accuracy, strength, and reproduction of details of dental gypsums. This study was designed to evaluate the dimensional changes and accurate details reproduction of three type IV dental gypsums.
Materials and Methods: 60 samples in 3 groups of dental gypsums of G30,Yeti Rock and FujirockEP were evaluated. The detail reproduction of 50 micron scratched line was analyzed by a microscope at 12× magnification. The samples were assayed for dimensional changes at 2 and 24 hours and 1 week after pouring. Photograph images were taken from samples in fixed distance by a camera (Canon D600) and analyzed in corel draw software. Data were analyzed using ANOVA and chi-square (P<0.05).
Results: There were significant differences in the details reproduction between three gypsums (P≤0.05) and the highest values was for Fujirock EP, Yeti Rock. The G30 did not reconstruct the details. There was no significant difference in the dimensional changes of the evaluated gypsums based on time (P≥0.05).
Conclusion: All three different gypsums evaluated in this study showed the dimensional stability during one week. Fujirock EP and Yeti Rock could reconstruct the details and G30 gypsum could not.
Hoseinali Mahgoli, Rezvaneh Ghazanfari, Mahdi Mirmohammadi, Davoud Zare, Mahnaz Arshad,
Volume 32, Issue 3 (11-2019)
Abstract
Background and aims: Solubility is an important property of luting cements in determining clinical durability. The aim of this study was to compare the solubility of Panavia, Calibra and Maxcem resin cements with that of GC Fuji PLUS resin modified glass ionomer cement in three different pH values.
Materials and Methods: A total of 96 specimens were prepared (8mm diameter, 4mm thickness) according to manufacturer instructions. After setting, they were desiccated and weighed. The specimens were kept immersed in distilled water and lactic acid solution (pH values of 3 and 5) for 30 days and then removed and weighed again. Data were statistically analyzed by SPSS18 using two-way ANOVA with P≤0.05 set as the level of significance.
Results: The results of this study showed no significant difference between three pH values (P=0.08). The Calibra resin cement had the lowest value of solubility in distilled water and both pH of lactic acid. GC Fuji PLUS resin modified glass ionomer cement had the highest value of solubility in lactic acid and the Maxcem resin cement had the highest value of solubility in water.
Conclusion: The solubility characteristics of resin modified glass ionomer and three different resin cements were significantly affected by their composition and the storage condition.
Maryam Mohammadi Nodeh, Majid Beshkar, Mohammad Javad Kharazi Fard,
Volume 34, Issue 0 (5-2021)
Abstract
Background and Aims: Fractures of the facial bones and jawbones could cause functional problems along with social and cosmetic problems. Various factors (including road accidents, assault, falling from height, sport injuries, and getting hit by a hard object) could cause these fractures. Collecting and reporting accurate epidemiologic data regarding the facial fractures are major steps toward planning preventive measures. The aim of this study was to collect the epidemiologic data regarding maxillofacial fractures in two referral centers (Shariati and Sina hospitals) in the city of Tehran.
Materials and Methods: The study was a cross-sectional retrospective investigation. All the necessary data were collected from the patients’ files and analyzed using SPSS 25.
Results: The present study pursued data of 454 trauma admitted patients in oral and maxillofacial surgery wards of Shariati and Sina hospitals in 1397 and 1398. These data showed that a number of 374 patients of all patients were men and the other 80 were women. The ratio of male patients to female patients was 4.5:1. In 290 of cases (64%), the fractures occurred as combined fractures and in 164 cases (36%), the fractures occurred as single fracture. These fractures happened mostly in the mandibular bone and in mandibular body, and the least of these fractures happened in Orbit. This study showed that there was a significant relation (with 95% confidence level) between the mandibular body fractures and mandibular angle fractures. This study also showed that there was another significant relation (with 95% confidence level) between the mandibular angle fractures and LeFort 2 fractures. In addition, this study also showed (by using k2 exam) a relation between the etiology of trauma and the number of fractures.
Conclusion: This present study showed that the maxillofacial fractures happened mostly in men much more than women. If we put motorcycle accidents and car accidents in a group together called road accidents, the most common etiology of maxillofacial fractures is road accidents. The results showed that the most fractures happened in the age range of 15-25 year old.
Fatemeh Kazemi Bidhendi, Mahshid Mohammadi Basir, Doctor Mohammad Bagher Rezvani, Doctor Ali Khodabakhsh, Hossein Labbaf, Mohammad Amin Fahimi,
Volume 35, Issue 0 (5-2022)
Abstract
Background and Aims: Finishing and polishing of composites is a critical step influencing the clinical service of restorations. The aim of this article was to evaluate and compare the effect of two liquid polishes on the polish retention of two nanocomposites.
Materials and Methods: Eighty standardized disk-shaped specimens (4×2 mm) were prepared from two nanocomposites (n=40), including one nano-filled composite (Filtek Z350 XT-3M ESPE, USA) and one nano-hybrid composite (Aelite Aesthetic Enamel-Bisco, Inc. Schaumburg, USA). The specimens were randomly divided into 4 subgroups (n=10) based on the method of finishing (F) and polishing (P) procedures: M: as control, polymerized under Mylar strip; S: finish and polish with a sequence of Sof-Lex discs (3M ESPE, USA); SP: finish and polish with Sof-Lex discs and use of Permaseal liquid polish (Ultradent products, Inc. USA); SB: finish and polish with Sof-Lex discs and use of Biscover liquid polish (Bisco, Inc. Schaumburg, USA). The specimens were undergone pH cycling and brushing machine and then, the average surface roughness (Ra) and average profile changes along the desired area (Rz) of the specimens were determined with profilometer instrument. Two-way and one-way analysis of variance (ANOVA) was used to compare the mean of surface roughness. Then, Tukey test was used to identify the groups responsible for the difference and t-test was used to compare the mean of surface roughness.
Results: The type of composite and the method of polishing procedure had no effect on the mean Ra (P=0.733) but it had significant effect on Rz1 factor (P=0.025).
Conclusion: Using liquid polish after polishing discs had no effect on the polish retention of nanocomposites.
Ahmadreza Mohammadi, Malihe Safari, Maneli Houshyar, Maryam Mohebiniya,
Volume 37, Issue 0 (3-2024)
Abstract
Background and Aims: Idiopathic osteosclerosis is an asymptomatic local growth of cortical bone and is discovered incidentally on panoramic radiographs. The purpose of this study is to evaluate the frequency of idiopathic osteosclerosis and its radiographic features in panoramic images of patients referred to the Department of Maxillofacial Radiology, Faculty of Dentistry, Arak University of Medical Sciences (Iran) in 2022-2023.
Materials and Methods: In this cross-sectional study, 460 panoramic images from the radiology department of Arak Faculty of Dentistry were randomly selected and analyzed. The demographic information of patients, frequency of idiopathic osteosclerosis, location, and also its relationship with adjacent teeth in terms of proximity to lamina dura and periodontal ligament and radiographic features in terms of size and morphology were evaluated. The data were analyzed using the SPSS24 software.
Results: Panoramic images of 460 patients (266 men and 194 women) with an average age of 38.12 (11.75) years were evaluated. The frequency of idiopathic osteosclerosis was 6.1% (28 images). 92.9% of the lesions were in the lower jaw and 46.4% of them were near the premolar teeth. In 39.3% of the cases, the lesion was adjacent to the periodontal ligament and laminadora of the tooth. In 3.6% of the cases, it was associated with a small displacement of the adjacent tooth, and 17.9% was associated with tooth root resorption. According to the results, there was no correlation between the incidence of this lesion with age and gender (P>0.05).
Conclusion: According to the findings of this study, the frequency of idiopathic osteosclerosis in the patients referred to Arak dental school was reported as 6.1%. Most of these lesions were observed in the back of the lower jaw and thus, it is important to be able to distinguish this lesion from the radiopaque lesions of the jaw which need treatment.
- Shaghayegh Kohzadi, Zahra Mohammadi,
Volume 38, Issue 0 (4-2025)
Abstract
Guided bone and tissue regeneration is a common technique used in the treatment of areas around teeth and dental implants. In this framework, barrier membranes are employed to create a suitable environment that promotes new bone growth while preventing the invasion of foreign cellular components into this specific setting. Attributes such as biocompatibility with living tissues, structural integrity, longevity, and user-friendliness constitute the principal criteria for selecting appropriate membranes for this particular application. Given the extensive diversity of membrane types concerning their sources, texture, architecture, and inherent properties, determining the most suitable variant depends on the clinical condition presented by the patient and the specific treatment modality, thereby emphasizing its considerable importance. In recent years, fibrous membranes have garnered particular attention due to their distinctive characteristics. These membranes, made of natural or synthetic fibers, typically exhibit high porosity, which facilitates the ingress of vascular structures and osteogenic cells. Owing to their porosity and flexibility, fibrous membranes are considered exceptionally suitable for the regeneration of maxillofacial and dental tissues, thereby contributing to increase bone volume, guide its growth, and at the same time prevent soft tissue encroachment into the restoration area, which ultimately has a favorable effect on treatment outcomes. On the other hand, due to the complexity and extent of oral infections, new nanotechnological approaches have been proposed in recent years to reconstruct infected sites in dentistry. These strategies, by targeting specific sites and having non-toxic properties, can help deliver antimicrobial molecules, regenerate tissue, and maintain oral health. In this context, nanofibrous membranes serve as multifunctional structures, both in the controlled release of antimicrobial agents and as scaffolds for the formation of nascent tissue. Overall, fibrous membranes, by mimicking the physiological conditions of the organism, create an ideal environment for the growth and healing of bone tissues, leading to improved effectiveness in dental procedures. This article is devoted in detail to a comprehensive review of polymeric and composite fibrous membranes with drug release potential.
