Journal of Dental Medicine

Background and Aims: The dentistry profession is one of the most injuring professions that causes most pains and hurts for dentists because of their lack of knowledge about the ergonomic position through the work. The purpose of this study was to assess the ergonomic position of dentists with RULA method in dentists of Bojnord.
Materials and Methods: In this cross-sectional study, all of the Bojnord’s county dentists were selected. RULA method and Nowerdik questionnaire were used for investigating the agronomical position, and muscular-skeleton position, respectively. The analysis was done by SPSS22 using regression and chi-square test. A P-value of less than 0.005 was assumed as significant.
Results: The most muscle-skeleton reports were 55.6% (35 persons) related to back, 54% (34 persons) related to shoulders, 50.8% (32 persons) related to waist, and 47.6% (30 persons) related to neck aches. In the last 12 months, 90.5% of dentists reported pains from at least one of organs of their bodies and 27% were supposed to leave their works which the sex (P=0.84), length (P=0.75), and weight (P=0.38) were not significantly related to this case.
Conclusion: According to the results of this study educational interventions is essential to prevent the musculoskeletal disorders in dentistry.

Background and Aims:The erosive and ulcerative forms of Oral lichen planus causes pain and irritation, affects the nutrition and biological quality of the patient. Considering the high prevalence of the disease, the complications of conventional treatments and the resistance to classical drug therapy, the aim of this study was to compare the effect of infrared low level laser and triamcinolone acetonide mouth rinse on treatment of oral lichen planus lesions.
Materials and Methods:In this double blind clinical trial, 24 patients were selected randomly according to the inclusion and exclusion criteria and divided into two groups of 12. Before and after the study, pain and burning sensation index (VAS), apparent shape and score of the lesion and size of the lesion were recorded in the patients. We treated the first group with low level infrared laser (810 nm) twice a week with 0.5-2 j/cm² energy density and 300 mW/cm² power density up to a maximum of 10 sessions. For the second group, we prescribed a mouth rinse of triamcinolone acetonide 0.2% four times a day with antifungal drugs for a month. Then, the study`s criteria were recorded after the completion of treatment. All data were statistically analyzed using the repeated measure ANOVA test to compare the quantitative changes over time, The Mann-Whitney U test was used to compare the rank variables between two groups at any time and Friedman test for each group between different times.
Results: There was no significant difference between the groups in terms of severity of pain (P=0.255), score and size (P=0.186), and appearance (P=0.178) of the lesions among two groups. Although the two groups showed a significant decrease in all three indicators.
Conclusion:Considering that in both groups, all three indices were improved and these improvements were similar, it seems that laser therapy can be effective. It could be used as a therapeutic alternative in treating patients with OLP (Oral Lichen Planus) especially in cases with contraindication in corticosteroid administration or lack of appropriate therapeutic response or when there is resistance to treatment.

Background and Aims: The dentist's attire and appearance affects his/her relationships with the patients. It is also essential to sync the professional attire in dentistry with the habits and Islamic culture of Islamic Republic of Iran, meet the patients' desires, and pay attention to the infection-control-requirements as well.The objective of the present study was to determine the patients' viewpoints about the professional appearance of the dentists at Tehran University of Medical Sciences, Dental School in 1395-96.
Materials and Methods: In this descriptive cross-sectional study, 103 patients (54 females and 49 males) were studied. (=α0.05 and standard variation=4.5). The questionnaire were included color photographies of a female dentist and a male dentist dressed in different attires. The patients were asked to select the cleanest, and the most trustable, competent, and experienced dentist according to the 4 different attires. The frequencies and percentages of the participants’ answers to the questionaire were descriptively reported.
Results: All patients preferred dentists to use white coat during their treatment. For the male dentists, most patients (45.6%) favored simple hair model. For the female dentists, most patients (35.9%) considered veil as the more acceptable Hejaband, and 54.4% of them preferred light makeup.
Conclusion: All patients preferred their dentists to dress in the professional attire with a white coat. They believed that wearing formal-professional-dressing by the dentists may show them look cleaner, and more trustable, more competent, and experienced.

Background and Aims: The structural distinction of primary teeth compared to the permanent teeth leads to a faster penetration of the caries into the pulp, which makes effective treatment necessary. The aim of this study was to determine the success rate of pulpotomy in primary molar teeth and its effective factors using formocresol by students and residents at the department of pediatric dentistry of Hamedan dental school.
Materials and Methods: In this cross-sectional study, 113 children who previously had pulpotomy by formecresol in their primary molars (30 children by residents and 83 children by the students) were randomly evaluated based on referral time (at least 12 months after treatment) in terms of clinical and radiographic success rates. Data were analyzed by SPSS20 software using Chi-square and descriptive statistics.
Results: The success of the pulpotomy of primary molar teeth was 81.7%. The success rates of the general students and residents were 79.3% and 87.3%, respectively. The percentage of successful pulpotomy was significantly higher in general students at Stainless Steel Crown (S.S.C), second molar in maxilla (P<0.05), but did not have a significant relationship with age and sex (P>0.05). The percentage of pulpotomy success performed by residents did not have a significant correlation with gender, age, type of repair, type of teeth and jaws (P>0.05). In general, the percentage of success in S.S.C, the second molar and maxillary jaw was higher. Also, the success rate of pulpotomy by residents was significantly higher than that of general- students (P<0.05). The highest rates of pulpotomy failure were related to internal analysis.
Conclusion: Formocresol pulpotomy using S.S.C in the maxillary second molar teeth had higher success rate.

Background and Aims: The aim of the present study was to evaluate the effect of applying hydrophobic resin after use of different generation of the bonding systems on nanoleakage.
Materials and Methods: 20 third molar teeth were selected. The teeth were randomly divided into 4 groups of 5, each was treated using the fourth, fifth, sixth, and seven generation of dentin bonding. Then, the crown of teeth was sectioned from the CEJ region and each specimen was divided into two halves with mesiodistal cut, one half for the application of dentin bonding without the addition of a hydrophobic resin, and the other for the same dentin bonding by the addition of a hydrophobic resin. Afterwards, the specimens were restotred by composites. After placement of specimens in silver nitrate, the amount of nanoleakage was evaluated by SEM. Data were analyzed using a repeated measurement statistical analysis (α=0.05).
Results: The use of hydrophobic resins decreased nanoleakage and range of variations in all groups (P<0.05). This reduction was greater for total-etch dentin bonding. Higher degree of nanoleakage occurred in total-etch dentin bonding in most evaluated areas. In general, Clearfil S³ bond showed the least percent of the nanoleakage.
Conclusion: All dentin bonding systems showed some degree of reduction in nanoleakage after hydrophobic layer application and the reduction was greater in Total-etch adhesives systems.

Background and Aims: Methicillin-resistant Staphylococcus Aureus (MRSA) is an important infection source in dentistry for different disinfectants to be used to prevent its transmission. Furthermore, a variety of chemical disinfectants are developed to remove bacterial infections from the dental care workers' hands and claims are made regarding their superiority in infection control, although all requires scientific investigations. The aim of present study was to compare the effects of chemical hand-disinfectants Micro Zed HD, Aseptoman and Decosept on MRSA (methicillin resistant staphylococcus aureus) in different periods of time.
Materials and Methods: In this experimental study, the antibacterial efficacy of three hand-disinfectants on standard strain of MRSA (USA300: ATCC® BAA-1717™) was evaluated according to European standard of evaluating antiseptics (EN 1040:2005 CSN EN). First we prepared a 0.5 Mc Farland (108 CFU/ml) suspension of MRSA, and exposed to three disinfectants for 15, 30, 60 and 90 seconds. Then, they were transferred to separate plates of Mueller-Hinton medium and incubated in 37^◦C for 24 hours. The plates were compared then with control plate to evaluate the efficacy of materials on bacteria by calculating the CFU/ml of plates.
Results: Three hand-disinfectants evaluated in this study had the maximum anticabterial effect on MRSA in the minimum time of exposure (15 seconds), and we found no trace of growth in any plates.
Conclusion: The three hand-disinfectans (MicroZed HD, Aseptoman and Decosept) in the concentration suggested by their companies, showed no difference in efficacy to remove MRSA from hands.

Background and Aims: Passive fitness of implant frameworks are important factors for long-term success of dental implant restorations. The aim of this in vitro study was to evaluate the dimensional changes of implant supported zirconia frameworks fabricated by Zirkonzahn CAD/CAM system during fabrication stages.
Materials and Methods: The master model of 3-unit FDP was made of two implant abutments. The master model was scanned 12 times and data were saved as STL files (scanning groups). Using semi-sintered zirconia,
12 real-size frameworks (milling groups) and 12 enlarged frameworks which were then sintered (sintering group) were made in this system. Dimensions of master model and specimens of each stage were measured. The dimensional changes in respect to master model were calculated. Data were analyzed using Repeated measures ANOVA, independent t-test, and paired sample t-test at α=0.05 of significance.
Results: The milling stage showed greater dimensional changes comparing to the other stages (P<0.05). At all stages, the dimensional changes of premolar abutment height were greater than canine (P<0.001).
Conclusion: Within the limitations of this study, the results suggested that the fabrication stages and size of abutments had significant effects on the dimensional changes of zirconia frameworks.

Background and Aims: Use of computer and internet in our modern and digitalized society is an efficient tool to be up to date and fulfil the information gaps. The aim of this study was to evaluate the extent of computer and internet usage among dental students of Islamic Azad University, Tehran, in 2016.
Materials and Methods: This descriptive study for evaluating access and usage of computer and internet by dental students was done using a researcher-made questionnaire on 401 dental students. Validity and reliability (Kappa: 0.82) of the questionnaire was confirmed. Statistical analysis was done by SPSS22 using descriptive and Logistic regression analyses.
Results: More than 95% of the students had access to the computer and Internet. 45.6% of students reported their skills were in the basic level. The major use of computer among the students was internet but only 13.2% of students used Microsoft Office program. The students used the internet for dental subjects even monthly (34.9%) or weekly (29.4%). Only 9.7% of the students had participated in educational workshop for learning methods of research. The most limitation was internet velocity. Positive correlation was found among prospering ownership status (P<0.001), economic status (P=0.05), level of education semester (P=0.038) and the computer & internet usage (what’s more in terms of access and also in terms of improve information and knowledge).
Conclusion: Based on the results, a higher economic level, higher level of education, and property ownership made better access to the computer and Internet. However, computer skills should be more concerned in educational program.

Background and Aims: Gypsum products are used for several different purposes. Adaptation and success of casting restorations are dependent on dimensional accuracy, strength, and reproduction of details of dental gypsums. This study was designed to evaluate the dimensional changes and accurate details reproduction of three type IV dental gypsums.
Materials and Methods: 60 samples in 3 groups of dental gypsums of G30,Yeti Rock and FujirockEP were evaluated. The detail reproduction of 50 micron scratched line was analyzed by a microscope at 12× magnification. The samples were assayed for dimensional changes at 2 and 24 hours and 1 week after pouring. Photograph images were taken from samples in fixed distance by a camera (Canon D600) and analyzed in corel draw software. Data were analyzed using ANOVA and chi-square (P<0.05).
Results: There were significant differences in the details reproduction between three gypsums (P≤0.05) and the highest values was for Fujirock EP, Yeti Rock. The G30 did not reconstruct the details. There was no significant difference in the dimensional changes of the evaluated gypsums based on time (P≥0.05).
Conclusion: All three different gypsums evaluated in this study showed the dimensional stability during one week. Fujirock EP and Yeti Rock could reconstruct the details and G30 gypsum could not.

Background and Aims: Accurate diagnosis of vertical root fracture (VRF) is a fundamental importance in endodontics. Because of poor prognosis of VRF, digital radiographs with two horizontal angles have limitations in VRF detection. Also, Gutta-percha can produce artifacts that impair CBCT scan accuracy. The aim of this study was to compare accuracy of CBCT and digital radiography system in vertical root fracture in endodentically treated teeth.
Materials and Methods: In this study, 60 endodentically treated single teeth were selected and randomly coded. The teeth were divided into two groups: 30 with induced root fracture and 30 with no fracture. CBCT scan and digital radiographs with two horizontal angles with a difference of fifteen degrees for all teeth were performed. Two observers assessed the CBCT images and digital radiographies for presence of VRF. The statistical analysis used in this study was Weighted Kappa.
Results: CBCT had the highest sensivity (75.8) and specificity (90). Digital radiography with 68.3 sensitivity and 79.1 specificity were not as efficient as CBCT (P<0.05).
Conclusion: According to this study, the accuracy of CBCT seems to be higher than that of digital radiography in detecting VRF and provides the most reliable data in comparison of digital radiography.

Background and Aims: Due to high mortality rate and cost of smoking, WHO has emphasized on the role of dentists in smoking cessation among patients. The aim of the present study was to investigate the dental students, knowledge toward health consequences of smoking, their attitude towards smoking cessation activities, and their education programs in this field.
Materials and Methods: In this cross-sectional study, the target group was senior dental students at Tehran and Shahid Beheshti Universities of Medical Sciences, and Azad and Shahed Universities. A questionnaire was used to collect data in addition to background information, on the knowledge, attitudes, and education towards tobacco cessation counseling in dental practice was administered to the students. The sampling method was census. Data were analyzed using oneway Anova followed by Turkey HSD post-hoc test for pairwise comparison.
Results: Overall 138 students participated in this program (The response rate was 100%). Of the maximum achievable knowledge score (28), the average knowledge score in Tehran University was 22.8, in Shahid Beheshti University 20.31, in Azad University 22.31, and in Shahed University 22.16 (P=0.027) with significant statistical differences. However, But the average of attitude and education score of the students did not vary significantly (P>0.05).
Conclusion: Most of the students had sufficient knowledge about the risks of tobacco use and positive attitude toward tobacco cessation counseling. It was concluded that the students would only pay attention to the principals of smoking cessation counselling when they actually believe in them. Therefore, in order to improve the performance of students, training should be given on tobacco cessation techniques at the dental schools, thus, that students could play an effective role in tobacco cessation counseling for patients.

Background and aims: Solubility is an important property of luting cements in determining clinical durability. The aim of this study was to compare the solubility of Panavia, Calibra and Maxcem resin cements with that of GC Fuji PLUS resin modified glass ionomer cement in three different pH values.
Materials and Methods: A total of 96 specimens were prepared (8mm diameter, 4mm thickness) according to manufacturer instructions. After setting, they were desiccated and weighed. The specimens were kept immersed in distilled water and lactic acid solution (pH values of 3 and 5) for 30 days and then removed and weighed again. Data were statistically analyzed by SPSS18 using two-way ANOVA with P≤0.05 set as the level of significance.
Results: The results of this study showed no significant difference between three pH values (P=0.08). The Calibra resin cement had the lowest value of solubility in distilled water and both pH of lactic acid. GC Fuji PLUS resin modified glass ionomer cement had the highest value of solubility in lactic acid and the Maxcem resin cement had the highest value of solubility in water.
Conclusion: The solubility characteristics of resin modified glass ionomer and three different resin cements were significantly affected by their composition and the storage condition.

Background and Aims: Reconstruction of osseous defects is one of the ideal goals of periodontal treatments and dental implant therapy. Different biomaterials have been used for this purpose and many studies have tried to compare and introduce the best ones. The present study aimed to evaluate the effect of PDFDB (Partially Demineralized Freeze-Dried Bone Graft) and FDBA (Freeze Dried Bone Allograft) on the regeneration of rabbit calvarial defects.
Materials and Methods: In this experimental study, 48 similar defects with the diameter of 8 mm were generated in the calvarium of 16 rabbits. Two defects were filled with FDBA and PDFDB, while the other one remained unfilled as the control group. All defects were covered by collagen membranes. 6 and 12 weeks after surgery, the histologic and histomorphometric tests were performed to evaluate the following variables: the rate of new bone formation and its type, the amount of residual grafting material, degree of inflammation and pattern of bone formation. Comparison of osteogenesis percentage and residual biomaterial was performed by repetitive variance analysis, whereas qualitative variables were compared by Friedman non-parametric test.
Results: Regarding bone formation percentage, there was no statistically significant difference between three different groups at 6-week (P=0.33) and also at 12-week time points (P=0.98). The amount of residual material in the PDFDB group was significantly lower than FDBA (P=0.04) in the 6-week samples. However, this difference was not significant in the 12-week samples (P=0.41). Bone quality showed statistically significant difference between graft containing groups and control group after 12 weeks (P=0.01). It means, all samples in FDBA and PDFDB groups displayed lamellar bone after 12 weeks while in control group, only woven bone or a combination of woven and lamellar bone was seen.
Conclusion: FDBA and PDFDB demonstrated similar regenerating effect in the rabbit calvarial bone defects and hastened bone maturation compared to the non-grafted defects.

Background and Aims: Various methods to induce anesthesia have been investigated in situations where the primary inferior alveolar nerve block (IANB) injections fail. The aim of this study was to compare the effect of synergic effects of anesthetic injection of prilocaine supplemental with that of lidocaine anesthesia in teeth with irreversible pulpitis.
Materials and Methods: This study was a parallel-controlled clinical trial on 58 patients with one mandibular molar tooth having irreversible pulpitis. The first anesthesia was injected with an inferior alveolar block with 2% lidocaine anesthesia. Patients who failed pulpal anesthesia were randomly divided into two groups; case and control groups. In the case group, IANB was injected with 3% prilocaine, and in the control group with 2% lidocaine anesthesia. Anesthesia after the second injection was evaluated by three methods of numerical evaluation of the patient's response to Electric Pulp Tester (EPT), the severity of the patient's response to the cold test, and the extent of pain during the onset of access cavity latency on the Visual Analog Scale (VAS). Statistical analysis was performed using T-test and Mann-Whitney tests.
Results: There was no significant difference between the two groups in terms of depth of anesthesia (P>0.05).
Conclusion: The results of this study showed that there was no difference between 2% lidocaine and 3% prilocaine in the depth of supplemental IANB anesthesia after failure of first IANB in mandibular molar teeth with irreversible pulpitis.
 

Background and Aims: Oral squamous cell carcinoma (OSCC) is one of the most prevalent oral cancers with increased risk in individuals younger than 40 years especially in developed countries. There are many evidences that people who have plenty of fruits and vegetables in their diets tend to have lower risk of cancer. In this study, we evaluated the anticancer effect of four medicinal plants of Otostegia Persica, Otostegia Michauxii, Otostegia Aucheri, and Hibiscus Sabdariffa on OSCC cell lines.
Materials and Methods: In this study, methanolic & dichloromethane extracts of the above medicinal plants were used in order to evaluate their effect on oral squamous cell carcinoma cell line in different concentrations and after 24 , 48 and 72 hrs by MTT assay test. Finally, the appropriate concentration for repeating the test were chosen.
Results: In this study, the mean amounts of IC50 for O. persica and O. Aucheri were less than the two other herbs and the least and most amount of IC50 were related to the dicloromethanolic extract of O. persica after 72 hrs and the water extract of H. sabdariffa after 24 hrs, respectively.
Conclusion: It was concluded that all of the plants evaluated especially O.Persica and O.Aucheri had anticancer properties and dichloromethalonic extracts of these plant were more effective than that of methanolic extract.

Background and Aims: One of the most important challenges for dentists is providing a crown with appropriate marginal fit and gap. The 135-degree tooth preparation found to have some advantages such as technical ease and appropriate finish line record. Despite the advantages of 135-degree tooth preparation, scant research has been done in this area. Therefore, the aim of this study was to compare 135-degree and deep chamfer tooth preparation on the marginal fit and marginal gap of posterior metal-ceramic crowns.
Materials and Methods: Deep chamfer and 135-degree tooth preparation were performed on the two first mandibular molars with healthy coronal tissue and similar size. Impression was taken from each tooth and 30 crowns were made on each die. The sample plastered with fit checkers were pressed under the force of 40 N for 3 min in a universal testing machine. They were measured and recorded under a loop with 40x power in three points on each aspect. Data were analyzed by Wilcoxon and Kolmogorov-Smirnov tests using SPSS version 24.
Results: The mean marginal fit values in deep chamfer and 135-degree were 48.5417µm and 55.3333 µm, respectively with no statistically significant difference (P>0.05). While the mean marginal gap in deep chamfer (2.4833 µm) was significantly higher (P<0.05) than 135-degree (1.0083).
Conclusion: It can be concluded that the marginal gap by 135-degree’s tooth preparation was lower than that of deep chamfer in metal-ceramic crowns. However, no significant difference in the marginal fit between the deep chamfer and 135-degree tooth preparation was found.

Background and Aims: The vertical growth pattern of the face depends on several factors. One of these factors can be the muscle strength of the jaw. Maximum occlusal force (MOF) can be considered as an index to measure the function of the muscles of the masticatory system. Despite the various studies, the relationship between the facial pattern and muscle function is still controversial. According to soft tissue paradigm theory, muscle can affect the shape and form of bones of the jaw, face and head. The aim of this study was to determine the relationship between the maximum occlusal force and head and face growth pattern in dental students of Shahed University in Tehran.
Materials and Methods81 dental students (40 males and 41 females) were participated. MOF was measured with a loadcell designed for this purpose, and the anthropometric points of the face and head were measured with digital caliper. Two-way ANOVA and Tukey HSD tests were used to determine the effect of facial and head patterns on the maximum occlusal force. Statistical analysis was performed by SPSS23.
Results: The mean MOF in males was 480 N and in females 320 N. Head forms in our sample research were 54.32% Brachycephale, 32.09% Mesocephale, and 13.58% Dolicocephale. The form of the face was 23.45% euprosopic, 39.5% mesoprosopic, and 37.03% leptoprosopic. According to the statistical analysis, the relationship between the maximum occlusal force and leptoprosopic form of face was statistically significant (P=0.02). However, there was not significant relationship between the maximal occlusal force and none of the three type of head forms (P=0.813).
Conclusion: MOF was related to the leptoprosopic pattern of face, and these individuals had less bite power. No relationship between the maximum occlusal force and head forms and neither between the head pattern and facial pattern was found in this study. The maximum occlusal force in men was higher in all three facial patterns than that of women, although this relationship was not significant.

Background and Aims: Elastomeric chains are known as a current device with the purpose of dental movement in orthodontic treatments. The aim of this study was to compare the elastomeric behavior and force degradation rate between different elastomeric chains existing in Iran in different time durations.
Materials and Methods: 11 different elastomeric chains used in this study were: Class One, ASTAR, G&H, TSNPT, MIB (French and Chinese type), Ultra Chain and both American, Ortho Technology (simple and memory type). All chains were stretched upon to exert 150 g force and then force degradation rate in 6 time duration
(1, 3, 24 hours and 3, 7, 21 days) and modulus of elasticity (MOE) in 2 time duration (start and 21 days) were investigated. All Data were analyzed statistically by ANOVA, Tukey, Games-Howel tests.
Results: All chains up to the 21th day showed a significant decrease in MOE except for the G&H, ClassOne, simple orthotechnology and a significant force degradation except for the American (memory type). The most significant force degradation rate was in ASTAR gray (P<0.05) and the least in MIB (French), Ultra Chain, and American (P<0.05).
Conclusion: All chains showed significant time-dependent force degradation (mostly in the first day). Only, this rate was not significant in any time duration for the American (memory). In all groups, the most force degradation rate belonged to ASTAR gray and the least to Ultra Chain, MIB (French) and American after 21th day.

Background and Aims: Anxiety is a common problem in patients referred to dental clinics that is associated with underlying personality factors. The purpose of this study was to determine the role of personality traits in predicting dental anxiety.
Materials and Methods: In this study, 211 patients (110 men and 101 women) referred to the dental clinics in Tabriz in 2019, were selected by available sampling method. The method of this study is descriptive- correlative. The research instrument was a short-form NEO-personality inventory and a dental anxiety inventory. Data were analyzed by correlation and regression analysis using SPSS22.
Results: The research findings showed that the average age of women and men was 30 and 31 years, respectively. 49% of the clients were single and 51% were married, and the education of most of the clients was undergraduate. Also, Regression analysis showed that dental anxiety had a positive correlation with personality trait of neuroticism (r=-0.49, P<0.01), and it had a negative relationship with extroversion (r=-0.19, P<0.05), agreeableness (r=-0.21, P<0.01), consciences (r=-0.35, P<0.01); and two factors of neuroticism (t=4.71, P<0.01) and conscience (t=2.44, P<0.01), and predicted dental anxiety (P<0.05).
Conclusion: From the results, it can be concluded that anxiety with a sense of danger that was observed in many people in the face of dental interventions, occurred within individuals. By recognizing root factors, it can be partly strengthened by deterrent and suppressor personality factors for anxiety, and thus, taking advantages of the dental services and preventing from avoiding dental treatments.

Background and Aims: With increasing age and inability to maintain good oral hygiene, the chances of tooth loss increase and the need for dental implants will increase in the future. It also increases the risk of developing peripheral implants, especially at older ages in the failure of implant treatments. Recently, the high prevalence of cardiovascular disease and peri-implantitis in the elderly has been reported. The aim of this study was to investigate the effect of cardiovascular disease on the peri-implantitis in people with failed dental implants.
Materials and Methods: In this retrospective study, the files of patients referred to Shahid Montazeri Dental Clinic from 2009 to 2018 whose their failed implants were extracted, were collected. There were a total of 793 people with failed dental implants. The variables of this study were demographic information including age and sex, health status in terms of cardiovascular disease and peri-implantitis, which were identified and then statistically analyzed by examining the files of patients with these two variables. Data were statistically analyzed by SPSS25 statistical software and Chi-square was used to determine the effective variables.
Results: A total of 793 patients had failed dental implants, including 368 women (46.4%) and 425 men (53.6%) with an average age of 50.79 years. 42 patients (5.3%) had heart disease and 44 (5.5%) had peri-implantitis. According to the Chi-squared test, the significance level was less than 0.05 (P=0.011).
Conclusion: The results of this study showed that the cardiovascular disease and peri-implantitis were significantly related.