Journal of Dental Medicine

Background and Aims: Regarding the high prevalence of caries and oral dental diseases, especially in the elderly, and the increasing attention of people to using the concept of quality of life, this study was conducted to determine the relation between oral and dental health and the quality of life in elderly people in Yazd.
Materials and Methods: This cross-sectional study was performed using data from the Yazd Public Health Survey (YAHS) with a sample of 9293 people, in 1393-94. All information was collected from 1907 elderly people aged between 60 to 70 years, including quality of life and oral and dental indexes from the comprehensive questionnaire of YAHS. Data were analyzed by independent t-test and Spearman correlation coefficient using SPSS16 software.
Results: There was a significant relationship between the quality of life and oral hygiene (P<0.01). Also, the score of quality of life and oral health was significantly related to education (P<0.01).
Conclusion: This study showed the positive relation between the oral health the quality of life. In addition, there was a quality of life level in the elderly people with poor oral hygiene.

Background and aims: Solubility is an important property of luting cements in determining clinical durability. The aim of this study was to compare the solubility of Panavia, Calibra and Maxcem resin cements with that of GC Fuji PLUS resin modified glass ionomer cement in three different pH values.
Materials and Methods: A total of 96 specimens were prepared (8mm diameter, 4mm thickness) according to manufacturer instructions. After setting, they were desiccated and weighed. The specimens were kept immersed in distilled water and lactic acid solution (pH values of 3 and 5) for 30 days and then removed and weighed again. Data were statistically analyzed by SPSS18 using two-way ANOVA with P≤0.05 set as the level of significance.
Results: The results of this study showed no significant difference between three pH values (P=0.08). The Calibra resin cement had the lowest value of solubility in distilled water and both pH of lactic acid. GC Fuji PLUS resin modified glass ionomer cement had the highest value of solubility in lactic acid and the Maxcem resin cement had the highest value of solubility in water.
Conclusion: The solubility characteristics of resin modified glass ionomer and three different resin cements were significantly affected by their composition and the storage condition.

Background and Aims: Dental diagnosis may be affected by the occurrence of the errors in the intra-oral radiographic images and the patients’ treatment plan can be problematic in these cases. The repetition of these radiographs increases the risks of radiation exposure for the patients in turn. The present study assessed the incidences of common periapical radiographic errors taken by dental students in oral and maxillofacial radiology department of Mashhad dental school in 2017.
Materials and Methods: In this cross-sectional descriptive study, 1470 periapical radiographs prepared by student during a semester of 2017 were collected and evaluated. Radiographic observations were done and the incidence of conventional radiographic errors were determined. Finally, the frequency and percentage of radiographic errors were determined based on the type of radiography sex, the age of the patient, and the history of radiography. Then, results were analyzed using the Chi-Square test and SPSS19 (P=0.05).
Results: Film placement (27.2%), cone-cut (27.2%), elongation (13.2%) and horizontal angle (10.9%) were reported as the most common radiographic errors. The repetition rate of the radiographs was 2.9%; among them, the highest errors were Cone-cut errors in the upper jaw
Conclusion: Based on the results of this study, the most radiographic errors included film position and Cone-cut errors and these two errors were the most frequent cause of repetitive radiographies that required the provision of specific training for the prevention of these errors.

Background and Aims: The bleaching agents can lead to color and translucency changes in composite resins. Due to the increasing use of the nano composites and the silorane-based composites, this study aimed at examining the color and translucency changes of these restorations after bleaching agents.
Materials and Methods: In this experimental - laboratory study, 198 composite discs were divided into three groups of 66 specimens using three types of composite: the microhybrid composite Z250, the nanohybrid composite Z350 and the silorane-based composite P90. After acid etching, half of the specimens in each group were covered by a resin rebounding agent. Then, the color and translucency assessment was done by reflectance spectrophotometer, using CIE LAB system. Each group was divided into three subgroups of bleaching agents: the 40% hydrogen peroxide and 20% carbamide peroxide bleaching agents and the control group. After applying bleaching agents, the final color and translucency changes were assessed. Data were analyzed using Mann Whitney and Kruskal Wallis tests.
Results: The effect of composite and bleaching agent type and bonding agent were significant (P<0.001). The color changes in the microhybrid composite were higher than nanohybrid and silorane-based composites (P<0.001) (∆E>3.3). Also, the color changes by 20% carbamide peroxide were higher than that of hydrogen peroxide and control groups (P<0.001). The results of translucency changes were generally consistent with color-change measurements (∆E>3.3).
Conclusion: According to the present study, the most color changes appeared in the microhybrid composite and by 20% carbamide peroxide bleaching agent. Rebound samples were generally less affected by bleaching agents. The least color and translucency changes were related to nanohybrid composites.

Background and Aims: Various methods to induce anesthesia have been investigated in situations where the primary inferior alveolar nerve block (IANB) injections fail. The aim of this study was to compare the effect of synergic effects of anesthetic injection of prilocaine supplemental with that of lidocaine anesthesia in teeth with irreversible pulpitis.
Materials and Methods: This study was a parallel-controlled clinical trial on 58 patients with one mandibular molar tooth having irreversible pulpitis. The first anesthesia was injected with an inferior alveolar block with 2% lidocaine anesthesia. Patients who failed pulpal anesthesia were randomly divided into two groups; case and control groups. In the case group, IANB was injected with 3% prilocaine, and in the control group with 2% lidocaine anesthesia. Anesthesia after the second injection was evaluated by three methods of numerical evaluation of the patient's response to Electric Pulp Tester (EPT), the severity of the patient's response to the cold test, and the extent of pain during the onset of access cavity latency on the Visual Analog Scale (VAS). Statistical analysis was performed using T-test and Mann-Whitney tests.
Results: There was no significant difference between the two groups in terms of depth of anesthesia (P>0.05).
Conclusion: The results of this study showed that there was no difference between 2% lidocaine and 3% prilocaine in the depth of supplemental IANB anesthesia after failure of first IANB in mandibular molar teeth with irreversible pulpitis.
 

Background and Aims: Oral squamous cell carcinoma (OSCC) is one of the most prevalent oral cancers with increased risk in individuals younger than 40 years especially in developed countries. There are many evidences that people who have plenty of fruits and vegetables in their diets tend to have lower risk of cancer. In this study, we evaluated the anticancer effect of four medicinal plants of Otostegia Persica, Otostegia Michauxii, Otostegia Aucheri, and Hibiscus Sabdariffa on OSCC cell lines.
Materials and Methods: In this study, methanolic & dichloromethane extracts of the above medicinal plants were used in order to evaluate their effect on oral squamous cell carcinoma cell line in different concentrations and after 24 , 48 and 72 hrs by MTT assay test. Finally, the appropriate concentration for repeating the test were chosen.
Results: In this study, the mean amounts of IC50 for O. persica and O. Aucheri were less than the two other herbs and the least and most amount of IC50 were related to the dicloromethanolic extract of O. persica after 72 hrs and the water extract of H. sabdariffa after 24 hrs, respectively.
Conclusion: It was concluded that all of the plants evaluated especially O.Persica and O.Aucheri had anticancer properties and dichloromethalonic extracts of these plant were more effective than that of methanolic extract.

Background and Aims: One of the most important challenges for dentists is providing a crown with appropriate marginal fit and gap. The 135-degree tooth preparation found to have some advantages such as technical ease and appropriate finish line record. Despite the advantages of 135-degree tooth preparation, scant research has been done in this area. Therefore, the aim of this study was to compare 135-degree and deep chamfer tooth preparation on the marginal fit and marginal gap of posterior metal-ceramic crowns.
Materials and Methods: Deep chamfer and 135-degree tooth preparation were performed on the two first mandibular molars with healthy coronal tissue and similar size. Impression was taken from each tooth and 30 crowns were made on each die. The sample plastered with fit checkers were pressed under the force of 40 N for 3 min in a universal testing machine. They were measured and recorded under a loop with 40x power in three points on each aspect. Data were analyzed by Wilcoxon and Kolmogorov-Smirnov tests using SPSS version 24.
Results: The mean marginal fit values in deep chamfer and 135-degree were 48.5417µm and 55.3333 µm, respectively with no statistically significant difference (P>0.05). While the mean marginal gap in deep chamfer (2.4833 µm) was significantly higher (P<0.05) than 135-degree (1.0083).
Conclusion: It can be concluded that the marginal gap by 135-degree’s tooth preparation was lower than that of deep chamfer in metal-ceramic crowns. However, no significant difference in the marginal fit between the deep chamfer and 135-degree tooth preparation was found.

Background and Aims: Nasal obstruction is a common condition among children, in which delaying treatment can stabilize its negative effects on dentoalveolar structures during adulthood. In this study we aimed to investigate the effect of total nasal obstruction on the craniofacial structures of rabbits.
Materials and Methods: In this animal study, total numbers of 44 rabbits with high genetic proximity were selected. Several metal implants were inserted in the anatomic landmarks of their skulls and then underwent three different types of x-ray exposure (lateral, posterior-anterior and occlusal views). Half of them underwent surgically assisted total nasal obstruction, and the other half were considered as control group. All rabbits were kept in the same environment up to maturation period. Then, they underwent the same x-ray exposures. The primary and final radiographs were traced and various linear and angular were compared between them.
Results: The anterior facial height (P=0.01), maxillary depth (P=0.005), articular angle (P=0.005), maxillary and mandibular plan angle were significantly more in the rabbits with total nasal obstruction. However, the interdental width (P=0.005), maxillary perimeter (P=0.005), nasopharyngeal width (P=0.01) and maxillary and mandibular width were significantly less in them. The skull base length (P=0.30), gonial angle (P=0.40), and maxillary length (P=0.10) were not significantly different between the two groups.
Conclusion: Total nasal obstruction had various impacts on the craniofacial structures.

Background and Aims: Dental caries is a multifactorial and common disease that leads to a decrease in the quality of life of individuals. The aim of this study was to determine the relationship between serum vitamin D and dental caries in the third year-to-last year students of dental school of Tehran University of Medical Sciences.
Materials and Methods: This descriptive cross-sectional study was conducted on 123 dental students. Demographic and health information were completed through a checklist. The level of vitamin D in individuals was measured by blood sampling. We recorded caries by ICDAS (international caries detection and assessment system) in two levels of D(1-6)MFT (total of decayed, filled and missing tooth) and D(3-6)MFT (total of progressive decayed, filled and missing tooth). Data analysis was done by the SPSS package version 25 using statistical tests of correlation and regression.
Results: The results showed that the correlation coefficient between vitamin D and caries index D(1-6)MFT was -0.89 with a P-value of 0.3328 which was not statistically significant. Based on the backward logistic regression, there was a positive significant statistical association between the D(3-6)MFT with vitamin D deficiency (P<0.001), weight (P=0.012), dental visit (P=0.023) and frequency of sweet snack consumption (P=0.03). In addition a significant and inverse statistical association was reported between the D(3-6)MFT and milk consumption (P=0.026).
Conclusion: Among dentistry students, no relation between vitamin D deficiency and early stages of decay was seen, however this relation was statistically significant in regard with progressive dental caries.

Background and Aims: Considering the role of primary teeth in children's dental health and the importance of parental role on children dental health the purpose of this study was to determine the knowledge and practice of parents of 3-9 year-old children regarding to maintaining primary teeth.
Materials and Methods: This cross-sectional descriptive-analytical study was conducted on the parents referring to Ahwaz dental school in 2017. Using a questionnaire, the participants' demographic characteristics, knowledge and performance regarding maintaining of the primary molars were collected. The percentage of correct responses was considered as the level of knowledge and performance. Analysis of K-square and Spearman and Pearson correlation coefficient and T-test were employed to determine the relationship between the participants' knowledge and performance and their demographic variables. The significance level was P<0.05.
Results: 176 parents completed the questionnaire. The mean parental knowledge score was 57.42±7.45
(range 15-75), and the mean practice score was, 9.42±1.86 (range 4-12). No relationship was found between the parents’ age, sex, knowledge, and performance. The knowledge of parents who had a history of referral to the dentist, fewer children (rs=0.428), higher education (rs=0.490) and higher income (r=0.226) was significantly better (P<0.001). Also practice increases with higher awareness of parents (r=0.549) (P<0.001). The parents’ practice was significantly related to the history of referral to the dentist, and having fewer children (rs=0.320), higher education (rs=0.369), and higher income (r=0.253) (P<0.01).
Conclusion: The findings of this study showed that the knowledge and practice of the parents about primary teeth were moderate. Regarding the important role of primary teeth in children's health, increasing the parents’ knowledge on the maintenance of primary teeth is essential.

Background and Aims: Advances of genetic science in genomic techniques have led introducing new diagnostic systems to study the diseases or treatment efficacies. In this science, which named “Personalized Medicine”, human genetic structure is used for evaluation of the diagnosis, treatment, and prevention of disease. Regarding the limited number of studies regarding this issue in Oral & Maxillofacial diseases, this study was aimed to evaluate the benefits and challenges of this new area (Personalized Medicine) in dental treatments.
Materials and Methods: In this study, complete evaluation of abilities and challenges in order to apply the “Personalized Dentistry” in Dental treatments, and also its effect on oral health indexes were done. All the existing related articles were searched with the relevant key words in the scientific data bases of PubMed, Google Scholar, Medline, Scopus, SID and Magiran. Based on the inclusion and exclusion criteria, 5 articles were selected, assessed and summarized.
Results: In the evaluated articles, the benefits of “Personalized Dentistry” in dental treatments as targeted and specialized treatment could result in lower time, energy and cost. In addition, its disadvantage as unknown biologic effective factors and also, the cross effects of some of the above items on each other and the treatment procedures were mentioned.
Conclusion: Regarding the specialized sciences and diagnostic tools for oral & maxillofacial disease, the benefits of “Personalized Dentistry” application can be increased for special treatments of patients. Also, it could reduce the side effects of conventional therapies and thus, could be introduced as an effective step for better dental treatments.

Background and Aims: All metal components of orthodontic appliances are somewhat corroded in the oral environment due to some changes in chemical, mechanical, thermal, microbiological and enzymatic factors which facilitates ion release. Ionic release can result in a discoloration of the surrounding soft tissue or allergic reactions in sensitive patients or even local pain in the area. In general, ions can cause toxic and biological side effects if their values reach the threshold, so the release of ions from the metal components of orthodontic appliances is important to us. The aim of this review article to determine the rate of orthodontic appliances ion release in different solutions.
Materials and Methods: A review of the literature was carried out in Pubmed, Google Scholare and Web of science database using selected key words (Saliva/ Titanium/Normal Saline/ Ion release Orthodontic appliance/Mouth wash/ Nickel/ Chromium). These searches were limited to the articles published from 2005 to 2018. According to the inclusion and exclusion criteria, 25 articles were obtained.
Results: Because of conflicts in the reported results, it was necessary to synchronize the measurement methods and also to use artificial saliva medium with normal pH as a control to achieve better systematic comparison.
Conclusion: There was significant differences in the ion release between mouthwashes. In all studies, the effect of pH and acidity has been shown to increase the release of these ions. In addition, stainless steel (SS) instruments had the least biocompatibility among all types of alloys evaluated.

Background and Aims: Periodontitis is one of the most common causes of damage to the gums and retaining structures of the teeth. Matrix protein, a metalloproteinase, is known as intermediate collagenase and the enzyme collagenase fibroblast, which is encoded in humans by the MMP-1 gene. The aim of this study was to investigate 1G/2G polymorphism in the MMP-1 gene and its association with the periodontal disease in the Iranian patients.
Materials and Methods: In this study, 50 patients with periodontal disease and 50 patients were selected as the control group in Kerman city. DNA was extracted from a person's blood sample using a kit. The desired primers were controlled by the NCBI site. Then, with the Tetra arms PCR technique, the desired polymorphism was multiplied. In the next step, the samples were transferred to electrophoresis gel and examined. The results were analyzed with SPSS software using T-test or Squer Chi-(X²).
Results: The percentage of 1G/1G genotype in the patients group was 8% and for the controls group was 0%. The percentage of 2G/2G genotype for the patients group was 24% and for the controls group was 18%. In addition, the 1G/2G genotype frequency was 68% for the patients group, and for the controls group was 82% (P=0.83). The results of Tetra-arms PCR genotyping of the samples were confirmed by sequencing.

Conclusion: The findings indicated that in Iranian patients, MMP-1 -1607 1G/2G (rs1799750) was not significantly associated with periodontal disease. It is recommended to take more samples from different parts of Iran to confirm the results.

Background and Aims: The vertical growth pattern of the face depends on several factors. One of these factors can be the muscle strength of the jaw. Maximum occlusal force (MOF) can be considered as an index to measure the function of the muscles of the masticatory system. Despite the various studies, the relationship between the facial pattern and muscle function is still controversial. According to soft tissue paradigm theory, muscle can affect the shape and form of bones of the jaw, face and head. The aim of this study was to determine the relationship between the maximum occlusal force and head and face growth pattern in dental students of Shahed University in Tehran.
Materials and Methods81 dental students (40 males and 41 females) were participated. MOF was measured with a loadcell designed for this purpose, and the anthropometric points of the face and head were measured with digital caliper. Two-way ANOVA and Tukey HSD tests were used to determine the effect of facial and head patterns on the maximum occlusal force. Statistical analysis was performed by SPSS23.
Results: The mean MOF in males was 480 N and in females 320 N. Head forms in our sample research were 54.32% Brachycephale, 32.09% Mesocephale, and 13.58% Dolicocephale. The form of the face was 23.45% euprosopic, 39.5% mesoprosopic, and 37.03% leptoprosopic. According to the statistical analysis, the relationship between the maximum occlusal force and leptoprosopic form of face was statistically significant (P=0.02). However, there was not significant relationship between the maximal occlusal force and none of the three type of head forms (P=0.813).
Conclusion: MOF was related to the leptoprosopic pattern of face, and these individuals had less bite power. No relationship between the maximum occlusal force and head forms and neither between the head pattern and facial pattern was found in this study. The maximum occlusal force in men was higher in all three facial patterns than that of women, although this relationship was not significant.

Background and Aims: Elastomeric chains are known as a current device with the purpose of dental movement in orthodontic treatments. The aim of this study was to compare the elastomeric behavior and force degradation rate between different elastomeric chains existing in Iran in different time durations.
Materials and Methods: 11 different elastomeric chains used in this study were: Class One, ASTAR, G&H, TSNPT, MIB (French and Chinese type), Ultra Chain and both American, Ortho Technology (simple and memory type). All chains were stretched upon to exert 150 g force and then force degradation rate in 6 time duration
(1, 3, 24 hours and 3, 7, 21 days) and modulus of elasticity (MOE) in 2 time duration (start and 21 days) were investigated. All Data were analyzed statistically by ANOVA, Tukey, Games-Howel tests.
Results: All chains up to the 21th day showed a significant decrease in MOE except for the G&H, ClassOne, simple orthotechnology and a significant force degradation except for the American (memory type). The most significant force degradation rate was in ASTAR gray (P<0.05) and the least in MIB (French), Ultra Chain, and American (P<0.05).
Conclusion: All chains showed significant time-dependent force degradation (mostly in the first day). Only, this rate was not significant in any time duration for the American (memory). In all groups, the most force degradation rate belonged to ASTAR gray and the least to Ultra Chain, MIB (French) and American after 21th day.

Background and Aims: Erosion is the chemical dissolution of a tooth by acid without bacterial involvement. The purpose of the current study was to investigate the effect of resin infiltration (Icon), MI paste plus, and Nd:YAG laser on the enamel microhardness.
Materials and Methods: 40 enamel samples were obtained from the third molar tooth. Primary microhardness was measured in all specimens. Then, erosion was created using hydrochloride acid on the surfaces of enamel and the microhardness values were measured. The samples were randomly divided into four groups. G1: MI paste plus, G2: MI paste plus+ Nd:YA laser, G3: ICON without etching, G4: ICON with etching. Erosion was induced again by hydrochloric acid and then subjected to thermocycling. Finally, the microhardness of the samples was measured. Statistical analysis was performed using SPSS23 software, one-way ANOVA, multiple Tukey and T-test comparisons. P<0.05 was considered as a significant level.
Results: The microhardness increased in the third stage compared to the second stage in all groups, which was statistically significant (P<0.000). Also, the comparison of the increase of microhardness among groups, except second group with the fourth group, was statistically significant.
Conclusion: All the materials used in this study significantly increased the microhardness of the eroded enamel.

Background and Aims: The inferior alveolar nerve block (IANB) is the most frequently used technique for mandibular anesthesia. Due to the many factors which can cause its failure, the aim of this study was to evaluate the efficacy of experience and knowledge in the success rate of IANB technique.
Materials and Methods: : In this study, 115 students of Shiraz Dental school were participated in two groups. One group contained 53 novice students and another group 62 students with one year experience in IANB injection. Each student accomplished injection once and then success or failure of the injection was examined. In order to evaluate the students’ knowledge, each student was asked to fill out a questioner including 6 questions related to the instruction of the injection. Data were then collected, coded, and analyzed by SPSS18 using Chi square with a significant level of 0.05.
Results: The rates of knowledge in novice and experienced group were 71.6% and 86.3%, respectively. The success rates of IANB were 47.1% in novice group and 64.3% in experienced group. The success rates of IANB and knowledge were significantly higher in the experienced group compared with the novice group. (P=0.02 and P=0.01, respectively) There was no significant difference between male and female (P=0.06).
Conclusion: The results showed that knowledge and experience could play an important role in the success rate of IANB technique.

Background and Aims: Due to the very high importance of assessing the clinical performance of students, choosing the best assessment tool and method is one of the most important goals and tasks in medical education. The objective of this study was the development of a checklist for the assessment of dental students’ clinical skills of Tehran University of Medical Sciences, in the clinical complete denture course. The second aim was to determine the validity and reliability of the checklist, and The third aim was the evaluation of raters’ and students’ satisfaction.
Materials and Methods: The checklist was developed in expert panel sessions, and the validity and reliability of the checklist were assessed with CVI (content validity index) test-retest and inter-rater reliability methods, respectively. Students (n=15) were evaluated with a developed checklist. At the end of the session, the satisfaction level of staff and students were assessed. The obtained information was reported descriptively with the expression of mean and standard deviation and in the form of relative and absolute frequencies.
Results: The content validity index (CVI) of the checklist was 0.96. The reliability of the checklist confirmed with a high Intraclass Correlation Coefficient (>0.8) (between 0.82-0.97) (P<0.05). The coefficient of agreement in inter-rater reliability was 0.99 (between 0.991-0.998). Raters’ and students’ satisfaction earned a high percentage of satisfaction.
Conclusion: The designed checklist has the optimal features of a good students’ clinical performance assessment tool; it seems that using this checklist can be an excellent alternative method to a global rating scale to assess the clinical skills of dental students in the complete denture courses.

Background and Aims: Immediate implant placement following tooth extraction is a treatment with many advantages. Alveolar bone preservation after immediate implant, need minimum of 2 mm thickness in buccal bone plate. The aim of this study was to evaluate the thickness of buccal cortical bone of maxillary premolars by Cone Beam Computational Tomography (CBCT) technique.
Materials and Methods: In this descriptive epidemiological study, Cone Beam Computed Tomography image was obtained from 29 patients (male and female) referred to the radiology department of Jundi Shapoor dental school of Ahvaz from 1393 (Mehr) to 1394 (Shahrivar) for implant insertion insertion. The thickness of buccal cortical bone was measured in 3 and 5 mm apical to the CEJ and root apex, perpendicular to the longitudinal axis. All the measurements were done by two oral and maxillofacial radiologists, separately. Data were analyzed by SPSS22 software, using descriptive statistics, and T-test.
Results: The thickness of buccal cortical bone in second premolar was significantly more than 1 mm (P=0.001), but in first premolar, the thickness was close to 1 mm with a non-significant difference (P=0.29).
Conclusion: The results of this study showed that immediate implant insertion could be done in the maxillary second premolar area with more predictability compared to the first premolar area.

Background and Aims: Some of the post-operative complications of impacted third molar surgery, one of the most prevalent surgeries in oral field, are known to be infection, erythema, trismus and pain. Antibiotic prescription to prevent post-operative infection under some particular circumstances, is acceptable but under debate considering their disadvantages. In the present study, we examined the infection rate in patients taking no or 2 types of antibiotics distinctively after impacted mandibular third molar surgery.
Materials and Methods: In this double blind clinical trial, 90 patients within the age range of 18 to 34 were dedicated to 3 groups (group 1: 2 capsules of placebo on surgery day and 1 for 4 days, group 2: Amoxicillin 500 mg every 8 hours for 5 days, group 3: Azithromycin 250 mg, 2 capsules on surgery day and 1 capsule for 4 days). All subjects were treated by a sole surgeon, protocol, surgical technique, and flap type and the same amount of osteotomy. In addition to aforesaid drugs, the patients received chlorhexidine and Gelofen 400 mg. At the day 7 postoperative, cases were examined to evaluate the infection (trismus, erythema and halitosis). Data were analysed using Chi-Square test and the groups were compared by Kruskal-Wallis test.
Results: Three signs of infection (halitosis, erythema and trismus) were compared in patients. Symptoms of halitosis and erythema were more indicated in first group, but the ultimate statistical analyses among the 3 groups from halitosis and erythema viewpoint showed no significant difference (P=0.072, P=0.149). Although, no severe trismus was reported, the most moderate trismus incidence was in group 2 and mild trismus was exhibited in group 1. In group 3, no trismus occurred. On the whole, the trismus frequency among groups was statistically significant (P=0.004).
Conclusion: Comparing infection symptoms of the three study groups emphasized the fact that only trismus rate was statistically significant (P=0.004). On balance, the results of this study indicated that antibiotics did not have significant impact on the reduction of most postoperative complications, especially on infection.