Showing 29 results for Teeth
D. Goodarzipour, A. Saeedi, N. Bahrami,
Volume 22, Issue 3 (12-2009)
Abstract
Background and Aim: Impaction of maxillary cuspids is the most common after third molars with 1% to 3% prevalence. Localization of these impacted teeth may affect orthodontic or surgical treatment plan. Therefore, different techniques have been introduced to localize impacted canines. The present study was conducted to compare the accuracy of panoramic, tube shift and panoramic plus palpation in determination of the position of maxillary impacted canine.
Materials and Methods: 47 patients (20 females, 27 males) with the age of more than 12 years (mean age of 25.4 years old) whom referred to Dental School, Tehran University of Medical Sciences, with at least one impacted maxillary canine included. An oral and maxillofacial radiologist localized impacted canine first by using panoramic then tube shift technique blindly. After that, an oral and maxillofacial surgeon localized the canine by panoramic and palpation of the area before surgery. Data obtained from radiologist and surgeon were compared with true location of canine after surgery. Statistical analysis was done using sensitivity and specificity.
Results: Among total 47 impacted maxillary canines, 11 cases (23.4%) showed buccal impactions and 36 cases (76.6%) palatal impactions. Sensitivity (ability of technique to localize palatal impaction) of all of the techniques were same (100%) but specificity (ability of technique to localize buccal impaction) of tube shift (100%) was more than two others (0%).
Conclusion: The tube shift technique was the most accurate technique to localize maxillary unerupted canines compared to the others. Due to the ability of panoramic and panoramic with palpation in prediction of palatal canine impactions and failure of these techniques to predict buccal impactions, both methods are not suitable in localization of impacted maxillary canines and they must be used as adjunctive techniques.
R. Haghgoo, F. Abbasi,
Volume 23, Issue 1 (6-2010)
Abstract
Background and Aims: Formocresol is one of the most common pulpotomy medicaments for primary teeth. Because of its systemic and local side effects, it may be essential to use another material instead of formocresol. The aim of this study was to evaluate the histopothalogy of pulp after pulpotomy teeth with sodium hypochlorite and formocresol.
Materials and Methods: In this randomized clinical trial, 22 canine teeth that must be extracted because of orthodontic treatment were selected. The teeth were randomly divided into 2 groups (n=11) and pulpotomized with formocresol or sodium hypochlorite. These teeth were extracted after 2 months and pulpal response was evaluated according to the degree of inflammation and extent of pulpal involvement. Dentinal bridge formation was also evaluated. The data were analyzed by Mann-Whitney test.
Results: In formocresol group, mild inflammation was seen in 4 and moderate inflammation in 3 and severe inflammation in 4 cases. In sodium hypochlorite group mild inflammation was seen in 6 cases and moderate inflammation in 4 cases and severe inflammation in 1 case. Mann-Whitney test revealed that this difference was not statistically significant (P>0.05). In formocresol group, necrosis was seen in 5 cases, but abscess and internal resorption were not seen in any cases. In sodium hypochlorite group, internal resorption was seen in 3 cases but necrosis and abscess were not seen in any cases. Mann-Whitney test showed that the difference between two groups was significant in terms of necrosis (P=0.02). In sodium hypochlorite group, dentinal bridge was formed in 3 cases however, no dentinal bridge formation was seen in formocresol group. Mann-Whitney test showed that this difference was not significant statistically (P>0.05).
Conclusion: Based on the results of this study, sodium hypochlorite can be used as a pulpotomy agent in primary teeth.
N. Babaee, A . Poorsattar Bejeh Mir, M. Taghibakhsh, Z. Dehghan,
Volume 23, Issue 4 (1-2011)
Abstract
Background and Aims: Multiple supernumerary teeth are rare and often found in association with syndromes such as Gardner, Cleidocranial dysplasia and cleft lip and palate, with a much less chance for isolated non-syndromic cases. The aim of this study was to report a case with 6 supernumerary teeth without syndromic association.
Case Report: The patient was a 33 year-old female, referred to oral diseases and diagnosis department with chief complaint of sensitivity to cold and hot food in right upper premolar region. Oral examination revealed 5 erupted lingually supernumerary teeth (four in mandibular and one in maxillary premolar region, respectively). Further panoramic radiography clarified an extra impacted tooth in the palatal region of left premolar maxillary area. All extra teeth had been appeared since the age of 17 during one year, as the patient claimed. Medical history and thorough clinical and paraclinical examinations were not significant except for the hypothyroidism, since 5 years ago. No other family member noticed to be the case. Based on our findings, a diagnosis of non-syndromic multiple supernumerary teeth was established.
Conclusion: A thorough examination of each patient presented with supernumerary teeth, including panoramic and intraoral radiographic images may provide valuable information regarding accompanying syndromes and unerupted teeth. Early diagnosis is an essential step for orthodontic or surgical decisions making, preventing or avoiding worsening complications such as malocclusion, adjacent normal teeth delayed eruption or rotation, diasthema, cystic lesions and resorption of contiguous teeth.
L. Ghahramani, S. Shahabi, A. Amirjan, A Fazel,
Volume 23, Issue 4 (1-2011)
Abstract
Background and Aims: Failure of bonding between artificial teeth and denture base material is a considerable problem for patients who wear dentures. Because of the cost of denture repair and the expensive price of foreign artificial teeth, this study was designed to compare the bond strength of composite and acrylic artificial teeth with heat-cured and auto-polymerized denture base resins.
Materials and Methods: In this experimental and in vitro study, two type of acrylic resin (heat-cured: Selectaplus H/ Trevalon, Dentsply and auto-polymerized: Rapid Repair, Dentsply) and four artificial teeth (acrylic Marjan New, composite Glamour teeth which both of them are Iranian) and Ivoclar acrylic and composite teeth were used. Therefore, 8 groups of 14 specimens each were evaluated. A shear bond strenghth test in a Universal Testing Machine was used. Data were analyzed using the 2-way ANOVA test.
Results: The bond strengths of acrylic teeth (Marjan New and Ivoclar) to heat-cured resin were similar (P=0.632) and statistically higher than those of composite teeth (Glamour and Ivoclar). Acrylic teeth (Marjan New and Ivoclar) and Glamour teeth had similar bond strength to auto-polymerized resin, which showed the highest bond strength values. Ivoclar composite teeth showed significantly the lowest bond strength (P<0.05). All acrylic teeth had the highest mean bond strengths to heat-cured resin which were significantly different from that of
auto-polymerized resin (P<0.05). However, the bond strengths of all composite teeth to both denture base resins were not significantly different (P>0.05).
Conclusion: Based on the results of this study, the type of denture base material and artificial tooth may influence the failure load.
Z. Bahrololoomi, Aa. Soleymani, P. Namiranian,
Volume 24, Issue 2 (4-2011)
Abstract
Background and Aims: Use of glass ionomer cements in pediatric dentistry is increasing and limited information exists with regard to the effect of salivary contamination on the shear bond strength of glass-ionomer to dentin in primary teeth. The aim of this study was to evaluate the effect of salivary contamination on the shear bond strength of two types of glass ionomer cements to dentin in primary teeth.
Materials and Methods: A total of 36 human extracted primary molars were used in this study. The specimens were divided into two groups for each material and then further subdivided into three groups: group 1: uncontaminated, group 2: contaminated with saliva, group 3: contaminated, washed and air dried. The specimens in groups I, II, III were bonded to glass-ionomer and in groups IV, V, VI to resin modified glass-ionomer. Shear bond strength was measured using an Instron machine at 1 mm/min cross head speed. Data were analyzed with ANOVA and Tukey test.
Results: There were significant differences in the mean shear bond strength among groups IV, V (P=0.05). There were no significant difference among groups I & II (P=0.16), I & III (P= 0.93) and IV & VI (P=0.98).
Conclusion: Results showed that salivary contamination can decrease the mean shear bond strength of light- cured glass-ionomer to dentin in primary teeth.
Fahime Tabatabaei,
Volume 25, Issue 1 (4-2012)
Abstract
Dentistry has been a field dominated by a constant improvement of synthetic biomaterials. Tissue engineering of tooth is coming to change the panel of the dental materials such as restorative materials and implants. Certainly, it is the largest transition in history of dental materials science in terms of accepting this new and exciting technology. The objective of this article is to present various implications of tissue engineering in different fields of dentistry. To achieve this goal, a review of the literature was carried out by using Medline database to search topics including "dental stem cells", "teeth tissue engineering", "regenerative dentistry", "oral surgery", "periodontal regeneration" and "regenerative endodontics". These searches were limited to articles published after the year 2000. On the basis of our literature review, we have found that although there are significant challenges in oral tissues engineering, engineered tissues will find many applications in dentistry within the next few years.
Jalil Modaresi, Amir Reza Heshmat Mohajer, Hossein Aghili, Morteza Khorshidi, Faramarz Rostami Chavoshlo, Amirmohamad Mahabadi,
Volume 25, Issue 3 (7-2012)
Abstract
Background and Aims: Electric pulp testing is used for diagnosis of the pulp status. This test is technique sensitive and hence may elicit positive or negative false response in case of inaccurate use. The optimal site for placement of the probe tip has not been determined. The aim of this study was to evaluate the effect of pulp tester probe placement site on the response of maxillary teeth.
Materials and Methods: A total of 378 teeth (126 central incisors, 126 lateral incisors and 126 canines) in 67 voluntary 20-35 year-old patients were selected. Three sites on each tooth (incisal edge, labial and lingual surfaces) were tested with an electrical pulp tester and responses were recorded. Data were analyzed by Repeated Measure ANOVA test.
Results: The central teeth showed significantly lower sensation threshold than lateral and canine teeth (P<0.001). The incisal edge of tooth were significantly more sensitive compared to labial and lingual surfaces (P=0.008).
Conclusion: This study showed that the optimum site for placement of pulp tester probe was incisal edge.
Fateme Nematollahi, Nasim Azizi, Sima Shahabi, Loghman Ghahremani, Zohre Asgari, Hossein Bagheri ,
Volume 26, Issue 2 (5-2013)
Abstract
Background and Aims: Failure of bonding between artificial teeth and denture base material is a considerable problem for patients who wear dentures. According to the different impact of artificial teeth and different information about resistance force of mastication and also with deficiency in researchs, this study was designed to compare the bond strength of composite and acrylic artificial teeth to auto-polymerized denture base resins with and without cyclic loading.
Materials and Methods: In this experimental and in vitro study, an acrylic resin auto-polymerized (Rapid Repair, Dentsply) and four artificial teeth (Acrylic Marjan new, Composite Glamour teeth and Ivoclar acrylic and composite teeth) were used. Therefore, 8 groups of 10 specimens each were evaluated. All specimens were thermocycled for 5000 cycles, in water baths between 5 and 55 ◦ C. Half the specimens in each group were treated with cyclic loading at 50N for 14, 400 cycles at 1.2 Hz. The shear bond strengths were measured using a Universal Testing Machine. Data were analyzed using Two-way ANOVA test.
Results: Statistical analysis demonstrated no significant effect of cyclic loading on the shear bond strength, but the type of artificial tooth affected the shear bond strength (P=0.006). Also, the interaction between Cyclic loading and the type of artificial tooth showed no significant difference (P=0.98). Tukey test showed that acrylic teeth (Ivoclar) had statistically higher bond strength values than that of other teeth (PGlamour=0.02), (PComposite ivoclar=0.01) and (PMarjan new=0.02).
Conclusion: Within the limitation of this study, the predominant type of fracture in all groups was cohesive, therefore the bond strength was adequate in all teeth and the type of artificial tooth may influence the bond strength of denture teeth to denture base resin. Cyclic loading had no significant effect on the bond strength of denture teeth to the auto-polymerized acrylic resin.
Majid Akbari, Mohhamad Javad Moghaddas, Sara Majidinia,
Volume 27, Issue 2 (6-2014)
Abstract
Background and Aims: The aim of this study was to evaluate the fracture strength of restored teeth with three different types of E glass-fiber posts after thermo-mechanical loading.
Materials and Methods: Sixty extracted upper central incisor human teeth, with similar size, were selected and divided into three groups (n=20). Endodontic treatment was done in all groups and crowns were sectioned from 2 mm above CEJ. Then one type of posts in each group (Anthogyr, Svensk, Hetco) cemented using Panavia cement and the crowns were restored with a composite. The specimens in each group were thermocycled for 6000 cycles (5-55°C) and subjected to 1200000 cycles of mechanical loadiong in an artificial mouth machine. Then the fracture strength was measured and data were analyzed using ANOVA and T-student test (α=0.05).
Results: The mean fracture strengths in Hetco group before and after thermomechnical loading were 581.098 ± 192.742 N and 564.74±213.59 N, in Anthogyr group were 664.358 ± 135.878 N and 629.12±390.3 N and, in Svensk group were 780.258 ± 379.133 N and 779.84±282.59 N, respectively. There was no significant difference between groups and also there was no significant difference in each group before and after thermo-mechanical loading (P>0.05).
Conclusion: Restored teeth with Hetco fiber glass post were similar in terms of the fracture strength with that of two other posts after thermo-mechnical loading.
Hoorieh Bashizadeh Fakhar, Hanieh Kaviani, Mehrdad Panjnoosh, Ahmad Reza Shamshiri,
Volume 27, Issue 2 (6-2014)
Abstract
Background and Aims: It is crucial to verify the relationship between root apices and maxillary sinus floor in some surgical procedures like extraction and implant placement or in orthodontic movements like intrusion. Protrusion of roots into the sinus increases the risk of post extraction pneumatization which in turn decreases the available bone at the implant or denture sites. The aim of this study was to determine the panoramic radiology accuracy for defining the relationship between posterior root apices and the maxillary sinus floor by Cone Beam CT (CBCT).
Materials and Methods: Paired panoramic radiographs and CBCT images of 117 subjects were examined. 452 posterior maxillary roots including second premolar, first and second molar were classified by the means of the relationship with maxillary sinus floor. CBCT was used as Gold standard method, and the agreement of panoramic findings with CBCT was examined statistically. Data were analyzed using Chi-square and Multiple logistic regressions.
Results: Agreement of the panoramic and CBCT results were seen in 57.7% of all cases. Roots which had no contacts with the sinus floor (class 0) showed a high agreement of 89.5% between two imaging techniques. Roots in contact with sinus floor (class 1) showed 58.8 % and cases with root protrusion into sinus cavity (class 3, 4) showed 50% of agreement (P<0.001). Also in 36% of cases with no protrusion into the sinus cavity (class 0, 1, 2), panoramic showed protrusion. The agreement for the premolar was higher than molars (P<0.001)
Conclusion: The majority of roots which their images were projected on the sinus cavity had no vertical protrusion in CBCT cuts. Considering the results, in these cases CBCT can be recommended.
Seyed Amir Hossein Mirhashemi, Razieh Jabbarian,
Volume 27, Issue 2 (6-2014)
Abstract
The need to identify and determine the age of the unidentified dead person s or accident victims of natural disasters is clear. Also, some remedial measures in the field of orthodontics and pediatric dentistry depend on knowing the patient’s physiological age. Previous studies suggested that dental age have a good correlation with physiological age more than skeletal or o ther common methods of age determination. Among the various methods used to determine dental age , dental radiography provides wide facilities for clinicians. Being noninvasive and the ability of performing the technique on live subjects as well as simplicity and low cost and reliable results , have led researchers to investigate further on that . The formation and calcification process of teeth and changes during aging has been regarded by many, leading to introduce various methods in which the field. In this study, 36 related articles were achieved by searching PUBMED, Science Direct and Google Scholar resources and discussed. Provided what diversified means of determining age using dental radiographs is encouraged , it is recommended to be not restricted to use only one of the methods because the multilateral approach is more reliable.
Ahmad Jafari, Masoud Kiani, Mahin Nikkhah, Ronak Bakhtiari, Yahya Baradaran Nakhjavani, Ali Reza Heidari,
Volume 27, Issue 3 (9-2014)
Abstract
Background and Aims: Considering the complications of root canal system, debridement would not be effective only by mechanical instrumentation. Therefore, root canal irrigants with the antimicrobial effect that can eliminate more microorganisms during treatment, becomes important. The aim of this study was to compare the antimicrobial effects of 2% thyme essence, 2.5% sodium hypochlorite (NaClO), and normal saline as root canal irrigants for primary molar teeth.
Materials and Methods: This study was performed on 34 primary molars. Subjects were randomly divided into three groups (N=10). The root canals of the teeth were prepared up to the file #35 and all of the specimens were sterilized, and were then contaminated with entrococccus faecalis suspension (Enterococcus Faecalis ATTC 29212). After 48 hours of incubation, the specimens of each group were irrigated with corresponding irrigants. Then, the microbial specimens were collected with sterile paper points. After incubation, the numbers of Colony Forming Units (CFU) were counted using colony counter. Data were analyzed using Smirnov-Kolmogorov, Kruskal-Wallis and Mann-Whitney tests.
Results: Sodium hypochlorite showed the highest antimicrobial effect and showed significant differences compared with normal saline (P<0.001). However, the differences were not significant with thyme essence 2% (P=0.3).
Conclusion: Thyme essence could be considered as a natural irrigator with a comparable antiseptic effect to sodium hypochlorite.
Loghman Ghahramani, Hanieh Nokhbatolfoghahaei, Sima Shahabi, Mohsen Tamizi, Mostafa Fatemi,
Volume 27, Issue 3 (9-2014)
Abstract
Background and Aims: Debonding of denture teeth from the denture base can be frustrating for both clinician as well as patient. The aim of this study was to determine the effect of different tooth preparations on the tensile bond strength of composite denture teeth to acrylic denture base material.
Materials and Methods : In this experimental study, 108 anterior Glamour teeth were selected and divided into 9 groups, based on their preparation (physical: no physical change, glaze removal, creating two slots with 1.5 mm depth, creating a hole with 2.5mm depth, chemical: (without chemical materials, monomer, silane). Specimens were prepared and tested according to the methods of the International standards organization (ISO 20795-1). After attachment of teeth to acryl, the tensile bond stregth test was performed in a Universal Testing Machine (UTM) with a crosshead speed of 1mm/min and specimens were subjected to tensile force until failure. Data were analyzed with one-way ANOVA, Tukey HSD and Two-way ANOVA.
Results: There were significant differences between the bond strength of tested groups (P=0.012). Based on Tukey test, there was a significant difference between monomer/without physical change group and without/without (P<0.001) and control group. No significant differences were found between the bond strengths of the other groups (P=0.17) . All specimens were debonded as cohesive failure.
Conclusion: Application of monomer on the ridge lap surface led to improve the tensile bond strength between glamour composite denture teeth and Iranian acrylic resin, however physical changes were not effective. According to the cohesive failure of all the specimens, it can be concluded that the bond strength between this type of teeth and acrylic resin was stronger than the strength of teeth.
Sara Koosha, Ezatolah Jalalian,
Volume 28, Issue 3 (10-2015)
Abstract
Background and Aims: Preserving intact coronal and radicular tooth structure is considered to be crucial for the optimal biomechanical behavior of restored teeth .The ferrule effect has been extensively studied and still remains controversial from many perspectives. The purpose of this study was to summarize the results of different issues related to the ferrule effect and published in journals listed in Pub Med.
Materials and Methods: The search was conducted from 1985-2014 from Pub Med and scientific dentistry internal journals using the following key words: Ferrule, Ferrule effect, Literature review, Fracture resistance, Fatigue, Finite element analysis.
Results: The finding showed that the presence of 1.5-2 mm high and 1mm thickness ferrule had a positive effect on the fracture resistance of endodontically treated teeth.
Conclusion: The presence of ferrule effect is essential for successful endodontic treatment. If a ferrule can performed, the teeth will have poor prognosis for survival.
Nasim Seyfi, Mahsa Valizadeh,
Volume 29, Issue 4 (1-2017)
Abstract
Background and Aims: Traumatic dental injuries (TDIs) are of the most common dental problems in children and adolescents, which usually occur in the anterior segment and have a significant role in patient’s physical and psychological health. Immediate intervention for damaged teeth can elevate the success rate of treatment in TDI. Thus, general dentists’ knowledge and their effective intervention in TDI are important factors in prognosis of traumatized teeth. The objective of this study was to assess the general dentists’ knowledge and awareness regarding the diagnosis and management of traumatic dental injuries.
Materials and Methods: In this cross-sectional study, the questionnaire data were collected from 130 general dentists, including the demographic data and general dentists’ knowledge about TDIs. The data were analyzed using the Student t-test and Analysis of Variance (ANOVA), Spearman’s and Pearson’s correlation coefficient.
Results: The mean score of general dentists’ knowledge was 8.5 ± 1.5 (total score:10) and it was the same between both males and females (P=0.083). Dentists’ work place does not have any influence in their knowledge (P=0.133). Also, there was no statically significant relationship between the age, job experience and dentists’ knowledge (P=0.805). The relationship between the frequency of TDI managed cases and dentists’ knowledge was not significant (P=0.507).
Conclusion: Considering that the overall knowledge of general dentists regarding the management of TDI was sufficient, it could be a good opportunity in treating these injuries. As TDI is a developing science, it is important to motivate general dentists being up to date regarding this matter.
Alireza Hashemi Ashtiani, Ali Rohani, Sara Kholghi,
Volume 31, Issue 1 (6-2018)
Abstract
Background and Aims: Wear resistance of artificial teeth has an important role in denture longevity. The purpose of this in vitro study was to evaluate the wear resistance of three types of composite resin denture teeth with that of acrylic resin.
Materials and Methods: In this study, four types of artificial teeth, including 3 types of composite artificial teeth (Ivoclar, Apple and Yamahachita) and 1 type of acrylic resin artificial teeth (Ivoclar) were used. Ten maxillary first premolars were selected from each set and were fixed in autopolymerising acrylic resin. The wear test was performed for 1000 and 2000 cycles. The heights and weights were measured under a light stereo microscope and scales (0.001 gram accuracy) before and after wear cycles. Data were analysed by ANOVA and Duncan tests (P=0.05).
Results: There was no significant difference between the mean wear of the composite and acrylic resin ivoclar artificial teeth in 1000 and 2000 cycles (P>0.05), but this difference was significant between the other artificial teeth (P<0.05). In 1000 and 2000 cycles, there was a significant difference between the mean weight loss of samples of all four artificial teeth groups (P<0.05). Also, in this study, the composite and acrylic ivoclar artificial teeth showed significantly less wear-resistant than that of other teeth, and the highest wear rate was found for Yamahachita's composite artificial teeth.
Conclusion: The findings of this study suggested that Ivoclar composite or acrylic resin denture teeth can be more suitable options than other artificial teeth used in this study in cases susceptible to abrasion.
Mohammad Esmaeilzadeh, Fahimeh Daneshyar, Zakieh Donyavi, Bashir Tarighi, Shahin Nasiri,
Volume 31, Issue 3 (11-2018)
Abstract
Background and Aims: The structural distinction of primary teeth compared to the permanent teeth leads to a faster penetration of the caries into the pulp, which makes effective treatment necessary. The aim of this study was to determine the success rate of pulpotomy in primary molar teeth and its effective factors using formocresol by students and residents at the department of pediatric dentistry of Hamedan dental school.
Materials and Methods: In this cross-sectional study, 113 children who previously had pulpotomy by formecresol in their primary molars (30 children by residents and 83 children by the students) were randomly evaluated based on referral time (at least 12 months after treatment) in terms of clinical and radiographic success rates. Data were analyzed by SPSS20 software using Chi-square and descriptive statistics.
Results: The success of the pulpotomy of primary molar teeth was 81.7%. The success rates of the general students and residents were 79.3% and 87.3%, respectively. The percentage of successful pulpotomy was significantly higher in general students at Stainless Steel Crown (S.S.C), second molar in maxilla (P<0.05), but did not have a significant relationship with age and sex (P>0.05). The percentage of pulpotomy success performed by residents did not have a significant correlation with gender, age, type of repair, type of teeth and jaws (P>0.05). In general, the percentage of success in S.S.C, the second molar and maxillary jaw was higher. Also, the success rate of pulpotomy by residents was significantly higher than that of general- students (P<0.05). The highest rates of pulpotomy failure were related to internal analysis.
Conclusion: Formocresol pulpotomy using S.S.C in the maxillary second molar teeth had higher success rate.
Firoozeh Nilchian, Ehsan Ghasemi,
Volume 35, Issue 0 (5-2022)
Abstract
Background and Aims: There is a traditional belief that the primary teeth can be replaced by permanent teeth and preserving them is not important. The aim of this study was to evaluate the knowledge and attitude of parents of preschool and elementary school children referring to the Specialty Clinic of Isfahan University of Medical Sciences and Imam Hossein pediatric hospital about the importance of preserving deciduous teeth and related factors.
Materials and Methods: This descriptive cross-sectional study was performed on 323 parents of preschool and elementary school children referred to the special clinic of Isfahan University of Medical Sciences and Imam Hossein Pediatric hospital. The data collection method was a questionnaire and face-to-face interview. The questionnaire was made, it consisted of 21 multiple-choice questions and descriptive questions. Data were analyzed using descriptive statistics tests and analytical tests such as t-test and Pearson correlation coefficient.
Results: The mean score of knowledge of parents was 37.5 with a standard deviation of 16.9, the mean score of attitude was 55.8 with a standard deviation of 11.1 and the mean score of performance was 41.8 with a standard deviation of 15.6 out of 100. Pearson correlation coefficient showed that there was a direct relationship between knowledge, attitude, and performance scores (P<0.001). Parents' knowledge score was directly related to the mothers' and fathers' ages (P<0.001).
Conclusion: According to the results, parents' awareness of the importance of the preservation of deciduous teeth and related factors is poor, their attitudes are neutral and their performance is poor to moderate. It is suggested to improve treatment facilities available for children in the family and to educate parents about the preservation of deciduous teeth.
Mehrdad Kahvand, Mostafa Vahedian, Mansoureh Hadadzadeh, Ali Saleh, Aida Mehdipour,
Volume 36, Issue 0 (5-2023)
Abstract
Background and Aims: One of the concerns of dentists is selecting a suitable brand of stainless steel crowns with maximum dimensional adaptation with primary teeth. The aim of this study was to compare the primary molar crown dimensions with that of two brands of stainless steel crowns (SSCs) in a sample of Iranian children.
Materials and Methods: In this study, 130 eligible children between 3 and 12 years (66 boys, 64 girls) were selected. After recording the demographic information, the mesiodistal, buccolingual and occluso-gingival dimensions of first (D) and second (E) primary molars were measured on dental casts and compared with the dimensions of KTR (MeiMeiMinBenjing, Benjing, China) and Shinghung (Shinhungcompany, Seoul, South Korea) SSCs. Data were assessed using chi-square test and Pearson correlation coefficient. P<0.05 was considered statistically significant.
Results: In this study, the most dimension matching of the teeth with that of SSCs were observed mesiodistally in upper D and lower D, buccolingualy in the upper D and lower D, and occluso-gingivaly in upper D and lower E. The most cases of mismatch in the mesiodistal dimensions of the teeth with that of SSCs were observed in the lower E and upper D. Also, the most cases of mismatch in the buccolingual dimension were found for upper E and lower E.
Conclusion: Both SSCs brands in this study showed significant dimensional adaptation with the primary teeth in Iranian children. The most dimensional adaptation was between KTR SSCs and maxillary primary molars, and between Shinhung SSCs and mandibular primary molars.
Pooya Jannati, Faranak Vakili, Saeid Nokar, Somayeh Zeighami,
Volume 36, Issue 0 (5-2023)
Abstract
Background and Aims: Endocrown is a type of monoblock restoration using the pulp chamber and remaining coronal tooth structure for retention. Advancements in adhesive techniques have breathed fresh spirit into endocrown. Nowadays, there are two approaches for endocrown: conventional approach and biomimetic approach. This study aimed to review data on the steps and clinical and philosophical points of using these approaches to help dentists’ selection and performance.
Materials and Methods: The review was conducted by reviewing the articles available in PubMed, Scopus, and Google Scholar databases from 1995 to 2022. The keywords used were; Crown, Endodontically-treated teeth, Light-curing of dental adhesive, Onlay, and Post-Core.
Results: After removing duplicates, titles/abstracts were reviewed. Animal studies, studies without available full text or non-English language studies were excluded from the study. Then, the full texts of the remaining 59 articles were evaluated and 49 articles were eligible for the present study. The articles included clinical trials, in vitro, systematic reviews, and case reports.
Conclusion: Endocrown is a successful alternative to crown, especially in molar teeth. Regardless of the conventional or biomimetic approach, this treatment has a more favorable fracture pattern while preserving the remaining tooth tissue as much as possible.
