Showing 50 results for Ahmad
Mehrdad Panjnoosh, Farnoosh Taghavi, Ahmad Reza Shamshiri,
Volume 27, Issue 3 (9-2014)
Abstract
Background and Aims: There is a risk of nerve injury during the extraction of the impacted third molars, in cases with proximity of the inferior alveolar nerve and this tooth. The aim of this study was to evaluate the effect of different various factors on the degree of vulnerability using CBCT (Cone Beam Computed Tomography) imaging technique.
Materials and Methods: CBCT images of 191 patients referred for the exact assessment of the relationship between the mandibular canal and impacted mandibular third molars were selected. The position of these anatomical structures was evaluated at their contact point. The possible effect of gender, impaction form of the third molars, anatomical relationship between the third molars and the mandibular canal and the age differences were studied. Data were analyzed using Chi-square and Student’s t-test.
Results: There was a close relationship between the mandibular canal and impacted third molars in 81.7% of the patients. The contacts were shown to be significantly higher in females than males (P=0.01) and in the cases with the lingually position of the third molar and the mandibular canal (P<0.001). However, the age and impaction form of the teeth did not have a significant influence (P>0.05).
Conclusion: The risk of nerve damage or exposure is increased in females and lingual position of the mandibular canal to the third molar in cases with higher proximity between these 2 structures in panoramic radiographs using CBCT images. Therefore, the surgeon must pay enough attention in these cases of third molar extraction.
Mehdi Jafarzadeh, Maryam Haji Ahmadi, Hajar Esmaielian, Hadi Moshkel Gosha,
Volume 27, Issue 3 (9-2014)
Abstract
Background and Aims: Successful pediatric dentistry depends on the dentist's technical skills, as well as his/her ability to acquire and maintain a child's cooperation. The correction of dentist’ performance in this area affects the view of parents and increases the quality of dental services. The aim of this study was to evaluate the attitudes of general dentists toward behavior guidance techniques in Isfahan.
Materials and Methods: In this descriptive- analytic cross-sectional study, 100 general dentists of Isfahan city were selected with simple random sampling technique. They were asked to complete the questionnaire inquiring their attitude toward four different behavioral management techniques . An appropriate question about each of the methods was proposed by the authors, along with demographic characteristics including: gender, age, university, year of graduation, work experience, the mean number of pediatric patients referred in one month was provided in the form of a questionnaire. To evaluate the attitude of dentists to the questionnaire, the score from 1 to 5 was given to each item and the total score was considered. Higher score indicated more positive attitude of dentist. Data were analyzed using T-test, Pearsons correlation and one-way ANOVA (P<0.05).
Results: The mean scores for dental behavioral management techniques were positive reinforcement (4.2±2.7), general anesthesia (3.5±4.4), N2O sedation (3.4±4.4) and pharmacologic sedation (3.2±2.7), respectively. There were no significant differences between the mean score of dentist attitude and age, gender, clinical experience and the number of pediatric patient (P>0.05).
Conclusion: General dentists’ attitudes towards different behavior management techniques were associated with age, gender, clinical experience and the number of pediatric patient. General dentists’ tend was more towards non-drug behavior control methods such as positive reinforcement.
Mohamadreza Khami, Arezo Ebne Ahmadi, Mina Ahmadian, Samaneh Razeghi, Reza Yazdani,
Volume 27, Issue 3 (9-2014)
Abstract
Background and Aims: Tobacco kills 5 million people worldwide annually, according to the Health Ministry reaches this number is about 70,000 people a year in Iran. Dental professionals are in a unique position to promote smoking cessation due to the opportunity for regular interaction with their patients. The aim of this study was to investigate knowledge, attitudes, and skills of dental students at Tehran and Shahid Beheshti dental schools towards tobacco cessation counseling in dental office.
Materials and Methods: In this cross-sectional study, the target group was dental students at Tehran and Shahid Beheshti dental schools, and the sampling method was census. A questionnaire on the knowledge, attitudes, and skills towards tobacco cessation counseling in dental practice was administered to the students (n=93). Data were analyzed using T-test.
Results: The response rate was 100% (93 students participate in this program and all of them filled the questionnaire). The average score of knowledge at Tehran and Shahid Beheshti dental schools was 17.5 and 18.4, respectively (P=0.09), the average score of attitudes was 33.5 and 33.1, respectively (P=0.80). There were no significant differences between the two dental schools in these parts. The average score of skill was 11.9 and 16.6, respectively. The differences between the students of two dental schools in skill were significant (P=0.002).
Conclusion: Although the attitude of dental students at Tehran and Shahid Beheshti schools towards tobacco cessation counseling seemed to be fair, some deficiencies existed in their knowledge and skill. Dental education programs should be implemented properly in this field.
Goudarzipoor Dariush , Sowdagar Ahmad , Romoozi Elham , Xiavi Hesam Mikaili , Faal Behzad Sheykh ,
Volume 27, Issue 4 (1-2015)
Abstract
Background and Aims: In the panoramic images, palatoglossal space error develops when the patient is unable to put the tongue against the mouth roof. In the case of this error, the radiographic diagnosis of the area is made with some difficulties or ever the image may lose its diagnostic ability. The aim of the present study was to investigate the relationship between the palatoglossal space error of the panoramic images and skeletal relationship.
Materials and Methods: In this descriptive cross-sectional trial, 494 panoramic images were selected at the orthodontic department of Tehran dental school archive and the existence of the palatoglossal space was determined. The palatoglossal space error was statistically analyzed using chi-square test regarding the patients’ gender, age and skeletal relationships.
Results: Of total panoramic images, 346 (70.0%) cases showed palatoglossal space error while 148 (30.0%) images were free from this error. Furthermore, 74.1% of male images and 66.9% of female images showed palatoglossal space error. In Cl I (1˂ANB≤3), Cl II and Cl III patients 65.6%, 73.1% and 67.4% of the images demonstrated the error, respectively. The incidence of palatoglossal space error in 5-14 and 15 years old age or higher patients were 72.2% and 58.8%, respectively.
Conclusion: It was concluded that n o significant difference w as noted between the incidences of the palatoglossal space error regarding the patients’ gender or their skeletal relationships . T he error frequency was significantly decreased with age .
Mirhashemi Amirhossein , Geramy Allahyar , Sodagar Ahmad , Baghaeian Pedram ,
Volume 28, Issue 1 (5-2015)
Abstract
The aim of this review article was to define the mechanism of action and effects of commonly used medications on the tissue remodeling and Orthodontic Tooth Movement (OTM). A review on the effects of medications and dietary supplements on the rate of experimental tooth movement was performed using Cochrane library, Embase and medline (1980-2013). 63 articles were included in this review. 34 of them were related to the effects of hormones and analgesics, were evaluated in this article but their interpretation was hindered by the variability in experimental design, magnitude of force applied during tooth movement and medication regimens. Non Steroidal Anti-Inflammatory Drugs (NSAIDs) reduced the rate of tooth movement while non-NSAIDs such as acetaminophen had no effect on the rate of OTM. Corticosteroids, parathyroid hormone and thyroxin increased the rate of tooth movement. Sturgeons might slow OTM, but experimental studies are lacking. Medications might have an important influence on the rate of tooth movement and information on their consumption is necessary to adequately discuss treatment planning with patients.
Amirhossein Mirhashemi, Allahyar Geramy, Ahmad Sodagar, Pedram Baghaeian, Yasamin Jalali,
Volume 28, Issue 2 (7-2015)
Abstract
Molecules produced in various diseased tissues or drugs and nutrients consumed regularly by patients, can reach the mechanically stressed paradental tissues through the circulation and interact with local target cells. The combined effect of mechanical forces and one or more of these agents may be inhibitory, additive or synergistic. The aim of this review was to outline the mechanisms of action and effects of some commonly used drugs on tissue remodeling and Orthodontic Tooth Movement (OTM). A review on the effects of medications and dietary supplements on the rate of experimental tooth movement was performed using Cochrane library, Embase and Medline (1980-2013). 63 articles were included in the review. 34 of them related to the effects of hormones and analgesics were evaluated in the first part of this review. The rest of them (29 articles) were evaluated in the current review, but their interpretation was hindered by the variability in experimental design, magnitude of force applied during tooth movement and medication regimens. Vitamin D3 might enhance the pace of tooth movement, but dietary calcium and fluorides appear to reduce the rate of OTM. Bisphosphonates (BPNs) are considered to have marked inhibitory effects on the rate of tooth movement. Nicotine and nitric oxide might effectively increase the speed of OTM. All drugs reviewed had therapeutic effects, as well as side effects, that may influence the cells targeted by orthodontic forces. Therefore, it is imperative that the orthodontist pays close attention to the drug consumption history of each and every patient, before and during the course of orthodontic treatment. When the use of drugs is revealed, their effects and side effects on tissue systems should be explored to determine their potential influence on the outcome of mechanotherapy.
Allahyar Geramy, Amir Hossein Mirhashemi, Sahar Rafiei Chokami, Ahmadreza Shamshiri,
Volume 28, Issue 3 (10-2015)
Abstract
Background and Aims: Cl II malocclusion is one of the most common abnormalities in human societies and using a simple, affordable and accessible treatment that can be provided by general practitioners or specialists, to prevent future malocclusion complications is vital
. Cl II malocclusion treatment using functional appliances such as twin block and anterior inclined bite plan have less cost, side effects and complications compared to fixed orthodontic or orthosurgery
. Until now, the dentoskeletal changes resulting from the application of twin block and anterior inclined bite plan in patients with Class II malocclusion has not been evaluated. The objective of the present study was to assess the dentoskeletal changes following the use of twin-block functional appliance and inclined anterior bite plan in the patients with class II malocclusion div 1 during mixed dentition.
Materials and Methods: In this retrospective cohort trial, 60 patients with the definitive diagnosis of Class II div. 1 malocclusion having ANB>2 and FMA angel between 20 and 30 and without any previous treatment or syndrome who were treated with twin-block or inclined anterior bite plan appliance were selected and their lateral cephalometries were traced before and after treatment. Selected distance and angular landmarks were measured on the cephalograms with the good reliability (ICC=0.953) and the changes occurred in the landmarks were statistically analyzed using Student t test.
Results: Due to the increased mandibular growth, most of the landmarks experienced significant changes following the treatment with twin-block and inclined bite plan (P<0.05). The appliances corrected Class II malocclusion through improvement of mandibular length and position, maxillary and mandibular skeletal and dental relationships (decreased ANB angle and overjet) and stability of mandibular plan inclination. No significant differences were found between the devices regarding most landmarks changes (P>0.05), however, SNA (P=0.04), overjet (P=0.007) and wits appraisal (P=0.004) changed differently after using the appliances.
Conclusion: Despite with most similarities of both twin-block and anterior inclined bite plan to correct class II div. 1 malocclusion, Due to the advantages of anterior inclined bite plan such as less size, good patient cooperation and simple laboratory preparations the appliance can be used as substitute for complex functional appliances to correct class II div. 1 malocclusion before the growth spurt.
Hadi Ghasemi, Arezoo Ebnahmadi, Maryam Moezzyzadeh, Masoud Geramipour,
Volume 28, Issue 4 (1-2016)
Abstract
Background and Aims: Dental students’ evaluation of teachers’ educational activity is crucial for the improvement of dental school’s performance. The process of the evaluation needs a valid and reliable tool. This study aimed to produce and validate a questionnaire for the evaluation of dental school teachers by students.
Materials and Methods: A group of 15 teachers in the Shahid Beheshti dental school gave their opinions regarding the characteristics of an ideal teacher using nominal group technique. These characteristics together with characteristics gathered from similar studies made the base of a questionnaire which later underwent a validity and reliability assessment by means of the calculation of Content Validity Index (CVI), Content Validity Ratio (CVR), and Cronbach’s alpha coefficient.
Results: The preliminary questionnaire included 94 items in four categories naming: ethics, educational capability, practical capability, and managemet. After calculating CVR and CVI for each item, 23 items with CVR<0.33 and 20 items with CVI<0.79 have been excluded from the questionnaire leaving a questionnaire with 54 items. The overall reliability of this questionnaire using Chronbach’s alpha coefficient was 0.96.
Conclusion: Consulting an expert group that are familiar with different aspects of educational performance of faculty teachers, it was concluded that applying various methods for validity and reliability, and considering local culture values are useful for the preparation of the questionnaire for similar studies in Iran.
Mehrdad Ghane, Seyed Jalal Pourhashemi, Ahmad Jafari, Hajar Shekarchizadeh,
Volume 29, Issue 1 (7-2016)
Abstract
Background and Aims: The aim of this study was to assess the oral health behaviors in women with addiction history.
Materials and Methods: A cross-sectional study was carried out in women drug treatment centers under the supervision of Welfare Organization of Tehran province in Iran. Data collection process was conducted in three centers including a questionnaire with an interview format, clinical examination, and Chi-Square test and MANOVA for statistical analysis.
Results: The mean age of 95 women participating in this study was less than forty, whereas the age of starting drugs was twenty two. A majority of the patients were unemployed (71%) and more than that of two-third did not have a diploma education. Almost half of dentate participants had never or rarely brushed their teeth. Most of them had never used dental floss, while more than half had three or more times snacks or sweet drinks and more than three-fourth were daily smokers. The MANOVA analysis showed that the type of clinic to be visited, age, used stimulant, drug dependency length, the last time a dentist being visited and the brushing period had a statistically significant relationship with Decayed Teeth (DT), Missing Teeth (MT) and Filled Teeth (FT) (P<0.05).
Conclusion: Women with the prior drug addiction history had an unpromising oral health status which was obvious in their self-perceived oral health. Taking the appropriate preventive and therapeutic actions aiming for promoting oral health status of them seems to be necessary.
Narges Ameri , Hakimeh Siadat, Ahmad Reza Shamshiri, Marzieh Alikhasi,
Volume 29, Issue 2 (11-2016)
Abstract
Background and Aims: Marginal accuracy is a crucial factor influencing the clinical long-term reliability of implant-supported fixed dental prostheses (FDPs). The aim of this in vitro study was to evaluate the marginal fit of three-unit zirconia bridge frameworks fabricated using two different computer-aided design (CAD)/
computer-aided manufacturing (CAM) systems (AmannGirrbach and Zirkonzahn).
Materials and Methods: The master model of 3-unit FDP was made of two implant abutments (AmannGirrbach and Zirkonzahn) from canine to second premolar. Twelve frameworks were manufactured using each fabricating system from semi-sintered zirconia blanks, which had to be sintered for final density after milling. After manufacturing, the absolute marginal discrepancy in each abutment were determined by means of Video Measurement System (VMS). The data were analyzed, using independent and paired t test (P=0.05).
Results: For the premolar abutment, the absolute marginal discrepancy of frameworks fabricated by AmannGirrbach system was significantly greater than those of the other system (P=0.005). There was no significant difference between the marginal discrepancy of canine and premolar abutments (P>0.05).
Conclusion: Within the limitations of this study, it could be concluded that the marginal fit of zirconia FDPs was significantly dependent on the CAD/CAM system used, but the abutment size was not an effective factor.
Ladan Hafezi, Ahmadreza Talaeipour, Bentolhoda Kamali,
Volume 29, Issue 3 (10-2016)
Abstract
Background and Aims: According to the research background and need to print CBCT images in case of emergency, this study has been done to compare the quality and accuracy of the two methods of film and paper printing for CBCT images.
Materials and Methods: The study of CBCT images taken from 5 patients was done and the cross-sectional slices on Fotolusio DNP papers and film AGFA were printed. Afterward, the images was exmined by a maxillofacial radiologist. The images’ quality were identified and recorded with anatomical, from 1 to 4 on forms. The accuracy was determined by the diagnosis of alveolar canal area and the comparison with the gold standard. Data were analyzed using independent chi-square and Fisher exact tests’.
Results: The images quality in anatomical landmarks consisting PDL (P=0.02), lamina dura (P=0.006), the inferior alveolar canal (P=0.01) and the filling (P=0.006) had a significant difference. There was no significant difference. For the lower border of the mandible landmark, there was no difference between the two methods of printing. In comparing the diagnostic accuracy between the two methods (P=1).
Conclusion: The results showed that the diagnostic quality in film printing is better than paper printing and the diagnostic accuracy is the same in both methods.
Fateme Ramezanalizadeh, Azam Aliasghari, Mohammad Rabbani Khorasgani, Maryam Khoroushi, Arezoo Tahmourethpour, Ahmad Reza Jabbari,
Volume 29, Issue 4 (1-2017)
Abstract
Background and Aims: Dental caries is the most common infectious diseases. Among the oral bacteria, Streptococcus mutans and Streptococcus sobrinus are considered as the main causes of tooth decay. The aim of this study was to evaluate the production of hyperimmune bovine colostrum containing specific antibodies against cariogenic bacteria and its antimicrobial effects on the growth and adhesion of Streptococcus mutans and Streptococcus sobrinus in the laboratory.
Materials and Methods: In this experimental study, three pregnant bovine immunized with killed antigens of strains of Streptococcus mutans, Streptococcus mutans with Streptococcus Sobrinus and Streptococcus sobrinus through intramuscular injections. After delivery, The colostrum samples were collected, and the changes of anti-streptococci antibodies titers in colostrum and serum were determined by agglutination. Also,their antimicrobial effects against the growth and adhesion of oral streptococci were surveyed by the microtiter plate method. Data were analysed by One-Wey ANOVA in SPSS software.
Results: The results showed that in hyperimmunized bovine , the antibodies titers against injected bacteria were from 1.1000 to 1.3000 in sera samples and from 1.320 to 1.1280 in whey of colostrum samples. Colostrum of hyperimmune cows reduced the attachment of Streptococcus mutans and Streptococcus Sobrinus about 69 and 43 percents, respectively and also, the low dilutions of it reduced bacterial growth.
Conclusion: According to the antibacterial effect immune colostrum on two strains of cariogenic bacteria in vitro, It appears that this material could be useful in the prevention and control of dental caries.
Faramarz Mojtahedzade, Neda Moslemi, Ahmad Sodagar, Gita Kiaee, Bita ,
Volume 30, Issue 1 (6-2017)
Abstract
Background and Aims: There is an increased risk of periodontal diseases in patients undergoing fixed orthodontic treatment. Chlorhexidine (CHX) is frequently used to promote oral hygiene; however, it is associated with several complications. Herbal mouthwashes can be used as the substitute without having similar complications. The aim the present study was to compare the effects of herbal mouthwashes (Matrica and Persica) with CHX 0.2% on the periodontal parameters of patients under fixed orthodontic treatment.
Materials and Methods: In a double-blind randomized clinical trial, 84 patients under fix orthodontic treatment were selected. After receiving oral hygiene instruction, the patients were randomly assigned to four groups (group 1: Matrica, group 2: Persica, group 3: CHX 0.02%, group 4: normal saline). Dental plaque scores (PI), gingival inflammation (GI) and papillary bleeding (PBI) indices were measured at the beginning, 1 week after receiving oral hygiene instructions and 30 days after mouthwash consumption. The scores of the periodontal indices were statistically analyzed by Kruskal Wallis, ANOVA the paired Mann-whitney U test and Tukey test.
Results: All of the indices were significantly reduced in study groups (except for the control). Matrica and Persica mouthwashes were similarly effective in improving the periodontal parameters. Their efficacy in decreasing the PBI scores was significantly higher than CHX 0.2% (P<0.01).
Conclusion: Application of the two herbal mouthwashes was effective in improving the periodontal parameters in patients undergoing fixed orthodontic treatment.
Ahmad Jafari, Narges Gholizadeh, Rashid Ramezani, Hanie Emami Razavi, Shamsolmoulouk Najafi,
Volume 30, Issue 2 (8-2017)
Abstract
Background and Aims: Cancer is the second most common cause of death in developed countries. The goal of this study was to determine the important epidemiologic factors affecting diagnosis and survival rate of patients with laryngeal SCC, for prevention, control and increase longevity.
Materials and Methods: In this study, all the cases recorded at the Center of Cancer Office of the Iran Ministry of Health in Tehran between 2005-2009 were examined. From 513 cases, 279 that their follow-up was possible by phone or postal address were included in the study. Data collection were performed from questionnaire. The data were analyzed by SPSS version 20. The Kaplan Meier survival curves were utilized and, moreover, the corresponding influential factors were examined by using the Cox regression test.
Results: The mean age of patients were 61.1 years (SD=10.54). The gender of 92.1% of patients were male. The most widely used method for the treatment was a combination of three methods of surgery, radiation therapy, and chemotherapy. The overall five-year survival rate was 75.7% (SD=0.03). The gender, histological differentiation, and professional delay did not exhibit a statistical correlation with the survival rate (P=0.38, 0.14, 0.52), whereas the age and patient delay had a statistically significant relation with the survival rate (P=0.03, 0.07).
Conclusion: The survival rate was lower in older patients. Patient and professional delays were high, which need more attention for improving the quality of life.
Ladan Ranjbar Omrani, Masumeh Hasani Tabatabaei, Soma Faridi, Elham Ahmad,
Volume 30, Issue 3 (10-2017)
Abstract
Background and Aims: The aim of this study was to evaluate the effects of two fluoride containing mouth rinses on the color stability of two different resin composites.
Materials and Methods: 27 specimens (2×4×5 mm) were prepared from each of the following materials: a micro filled composite (Gradia, GC) and nanohybrid (Grandio). The specimens were polished by Soflex fine and superfine disks and then incubated in artificial saliva at 37°C for 24 h. The baseline color values (L, a, b) of each specimen were measured using an Easyshade spectrophotometer according to the CIELab color scale. The specimens were immersed in 20 mL of each mouth rinse and stored in an incubator at 37°C for 12 h. After incubation, the color values of all specimens were measured again, and the color change value (ΔE) was calculated. Data were analyzed by a 2-way analysis of variance at a significance level of 0.05.
Results: None of the mouth rinses created clinical significant color changes in the samples. There was no statistically significant difference among color susceptibility between resin composites (P=0.330). The interaction between the effect of mouth rinses and type of restorative materials was not statistically significant (P>0.05).
Conclusion: Accordance to the results of this study, the fluoride containing mouth rinses does not create color change in resin composites.
Sakineh Arami, Sakineh Arami, Masoumeh Hasani Tabatabaei, Seyed Reza Najafzadeh, Ahmadreza Shamshiri, Zohreh Moradi,
Volume 30, Issue 4 (1-2018)
Abstract
Background and Aims: According to many uses of MTA in different treatments, studying about its properties like the setting time, is of great importance. The aim of this study was to compare the initial and final setting time of an Iranian MTA and a foreign MTA.
Materials and Methods: Seven samples were in each group; for measurement of initial and final setting time of MTAs, a mold with dimension of 2×10 mm was prepared. The cements after mixation were put into an incubator with temperature of 37ₒC and humidity of 90%. After mixing of cements, a Gilmore needle with a weight of 100 gr and active tip of 2 mm was used vertically on the surface of MTA for measurement of the initial setting time. Setting was measured by the start of cement mixation to the time the tip of the needle didn’t penetrate to the surface of MTA. For measurement of the final setting time a Gilmore needle with a weight of 456 gr and active tip of 1mm was used vertically on the surface of MTA. The ANOVA test followed by Tukey test was used for comparison of the mean setting time between an Iranian and foreign MTA. The statistical difference was considered significant at the level of 0.05.
Resultes: The mean initial setting time Angelus and Root MTAs were 13.57±0.91 and 11.14±0.92 min, the mean final setting of Angelus and Root MTA, were 48.93±1.54 and 37.86±1.5 min while the initial setting time of Angelus MTA lasted for 0.53±43.2 more min than Root MTA (P=0.001). The final setting time of Angelus MTA took longer for 110.7±0.82 min than Root MTA (P=0.001).
Conclusion: The initial and final setting time of the Iranian MTA was shorter than the foreign one and thus it could a more alternative option in this respect.
Marzieh Alikhasi, Narges Ameri, Hakimeh Siadat, Ahmad Reza Shamshiri, Mohammadreza Nejati,
Volume 32, Issue 1 (7-2019)
Abstract
Background and Aims: Passive fitness of implant frameworks are important factors for long-term success of dental implant restorations. The aim of this in vitro study was to evaluate the dimensional changes of implant supported zirconia frameworks fabricated by Zirkonzahn CAD/CAM system during fabrication stages.
Materials and Methods: The master model of 3-unit FDP was made of two implant abutments. The master model was scanned 12 times and data were saved as STL files (scanning groups). Using semi-sintered zirconia,
12 real-size frameworks (milling groups) and 12 enlarged frameworks which were then sintered (sintering group) were made in this system. Dimensions of master model and specimens of each stage were measured. The dimensional changes in respect to master model were calculated. Data were analyzed using Repeated measures ANOVA, independent t-test, and paired sample t-test at α=0.05 of significance.
Results: The milling stage showed greater dimensional changes comparing to the other stages (P<0.05). At all stages, the dimensional changes of premolar abutment height were greater than canine (P<0.001).
Conclusion: Within the limitations of this study, the results suggested that the fabrication stages and size of abutments had significant effects on the dimensional changes of zirconia frameworks.
Hamid Gheibipour, Ali Ahmadi, Abolghsem Shokri,
Volume 32, Issue 3 (11-2019)
Abstract
Background and Aims: One of the most important determinants of health is Oral Health Literacy (OHL). The aim of this study was to investigate the OHL among nomadic population in Kouhrang city as pristine society.
Materials and Methods: This was a cross -sectional descriptive study among 200 nomadic population aged 18-60 years of Kouhrang city in 2018. Data were collected using a questionnaire and face-to-face interview, sampling method was performed by randomized cluster. The questionnaire consisted of 17 questions in 4 sections of reading comprehension, listening, perception of number, and decision making. According to the number of questions, the questionnaire score was formed 0 to 17 and the nomadic populations were categorized into three groups with inadequate OHL (0-9), borderline OHL (10-11), and adequate OHL (912-17).
Results: The mean and standard deviation of the participants in this study was 35.49±12.00. The results showed that 7.00% of participants had sufficient OHL (12-17), 21.51% borderline (10-11), and 71.50% had inadequate OHL
(0-9). The mean and standard deviation of OHL score in general was 7.65±2.80, and the mean DMFT index was 8.03±5.64 (P<0.001).
Conclusion: The results of this study showed that the OHL score in the nomadic population was low, and also the mean DMFT index was very high. It is necessary to pay attention to the timely prevention and treatment of the teeth, as well as serious attention to the health education in this population.
Azam Ahmadian Yazdi, Samareh Mortazavi, Hosein Saeedi Moghaddam,
Volume 32, Issue 3 (11-2019)
Abstract
Background and Aims: Dental diagnosis may be affected by the occurrence of the errors in the intra-oral radiographic images and the patients’ treatment plan can be problematic in these cases. The repetition of these radiographs increases the risks of radiation exposure for the patients in turn. The present study assessed the incidences of common periapical radiographic errors taken by dental students in oral and maxillofacial radiology department of Mashhad dental school in 2017.
Materials and Methods: In this cross-sectional descriptive study, 1470 periapical radiographs prepared by student during a semester of 2017 were collected and evaluated. Radiographic observations were done and the incidence of conventional radiographic errors were determined. Finally, the frequency and percentage of radiographic errors were determined based on the type of radiography sex, the age of the patient, and the history of radiography. Then, results were analyzed using the Chi-Square test and SPSS19 (P=0.05).
Results: Film placement (27.2%), cone-cut (27.2%), elongation (13.2%) and horizontal angle (10.9%) were reported as the most common radiographic errors. The repetition rate of the radiographs was 2.9%; among them, the highest errors were Cone-cut errors in the upper jaw
Conclusion: Based on the results of this study, the most radiographic errors included film position and Cone-cut errors and these two errors were the most frequent cause of repetitive radiographies that required the provision of specific training for the prevention of these errors.
Sara Mogharrabi, Asadallah Ahmadzadeh, Safoura Ghodsi, Farzad Bazmi, Sara Valizadeh,
Volume 33, Issue 1 (7-2020)
Abstract
Background and Aims: Immediate implant placement following tooth extraction is a treatment with many advantages. Alveolar bone preservation after immediate implant, need minimum of 2 mm thickness in buccal bone plate. The aim of this study was to evaluate the thickness of buccal cortical bone of maxillary premolars by Cone Beam Computational Tomography (CBCT) technique.
Materials and Methods: In this descriptive epidemiological study, Cone Beam Computed Tomography image was obtained from 29 patients (male and female) referred to the radiology department of Jundi Shapoor dental school of Ahvaz from 1393 (Mehr) to 1394 (Shahrivar) for implant insertion insertion. The thickness of buccal cortical bone was measured in 3 and 5 mm apical to the CEJ and root apex, perpendicular to the longitudinal axis. All the measurements were done by two oral and maxillofacial radiologists, separately. Data were analyzed by SPSS22 software, using descriptive statistics, and T-test.
Results: The thickness of buccal cortical bone in second premolar was significantly more than 1 mm (P=0.001), but in first premolar, the thickness was close to 1 mm with a non-significant difference (P=0.29).
Conclusion: The results of this study showed that immediate implant insertion could be done in the maxillary second premolar area with more predictability compared to the first premolar area.
