Showing 18 results for Denture
S. Zarrati , M. Nazari Marzjarani ,
Volume 15, Issue 2 (5-2002)
Abstract
Esthetic is a natural necessity among all human beings, and the reconstruction of the natural features of prosthesis is considered an important aspect in dentistry. Reconstruction of the natural features in removable prosthesis by characterization of denture base is one of the most important factors. In this regard esthetic, in removable prostheses, is achieved through different techniques such as: tooth selection and arrangement, designing the denture base and acrylic base color. The final goal for ail these effects is to achieve a natural appearance for denture. However, other factors such as treatment limitations, different personal needs and general health principles, should be taken into consideration. This article not only reviews the natural appearance of oral mucosa that is replaced by the denture base, but also discusses about the materials used in tinting acrylic denture base and their application techniques.
O. Savabi , M. ghasabzadeh ,
Volume 15, Issue 2 (5-2002)
Abstract
Esthetics is one of the prosthetic treatment goals. Correct selection of anterior teeth, regarding size and appearance, results in a successful treatment. The goal of the present research was to investigate the relationship between interzygomatic width and maxillary anterior teeth width in order to find a better determinant for artificial anterior teeth selection. In this study, the interzygomatic width and maxillary central incisors width and also the width of six maxillary anterior- teeth, in 71 subjects (29females and 42 males) were measured. The results showed a significant difference in maxillary anterior teeth width, comparing men and women, (P<0.05). These measurement in people under study, are less than Europeans. The interzygomatic width was also more in men than women (PO.05), which is, less than of European race. The ratio between interzygomatic and central maxillary incisor width was 15:1 which is less than 16:1 that is used in clinic. Thus, it is recommended to pay more attention to anterior teeth selection, especially in young patients.
O. Savabi , R. Mazaheri , S. Shadzi , F. Nejatidanesh ,
Volume 16, Issue 4 (1-2004)
Abstract
Statement of Problem:The surface topography of denture base material is an important factor for the adhesion of Candida albicans and other microorganisms.
Purpose: The aim of this study was to evaluate the adherence of Candida albicans to four types of denture base materials (Acropars acrylic resin, Meliodent acrylic resin, rough and smooth surfaces of Molloplast B).
Materials and Methods: Seven blocks of two types of acrylic resins and ten blocks of silicone with one rough and one smooth surface were made and incubated in a suspension of Candida albicans. After washing,the blocks were stained with acridine orange and examined under fluorescent microscope. For statistical analysis ANOVA and Duncan tests were used.
Results: It was observed that Candida adhesion to rough surfaces of acrylic resins and silicone was significantly more than polished surfaces of acrylic resins and smooth silicone (PO.0001). However, no
statistical significant difference was found between polished acrylic resins surfaces and smooth silicone.
Conclusion: Significant differences in the adherence of Candida to the surfaces of different denture base
materials are due to differences in surface topography, chemical, physical and hydrophobic properties so it is
recommended to minimize the roughness and irregularities of denture base.
Sh. Shahrabi , S. Moosavi Rad ,
Volume 18, Issue 2 (5-2005)
Abstract
Statement of Problem: Epulides Fissurata (EF) are common proliferative and denture- induced lesions of the oral cavity with a predilection for female. This suggests a possible role for sex steroid hormones in the development and progression of these lesions.
Purpose: The objective of this study was the immunohistochemical evaluation of epulis fissuratum of the oral cavity for estrogen and progesterone receptors expression in epithelial, stromal, inflammatory and endothelial cells populations.
Materials and Methods: In this cross-sectional study, 15 samples of formalin- fixed, paraffin- embedded epulis fissuratums including marginal mucosal tissues in 4 cases as a control group, were immuno-histochemically evaluated for estrogen and progesterone receptors protein expression.
Result: In 10 cases, estrogen receptor positivity was found within the epithelium and progesterone receptor immunoreactivity was present in 7 cases. Stromal cells exhibited estrogen and progesterone receptor immunostaining in many cases but only few cases showed expression of these receptors in the inflammatory and endothelial cells. Estrogen and progesterone receptors were also detected in some cases containing salivary glands tissue.
Conclusion: Although chronic irritation may be the initiating factor for the occurence of epulis fissuratum, some of the cells in the lesion, could be potential targets for estrogen and progestrone hormones.
M. Farzin , F. Bahrani , Am. Rawa ,
Volume 19, Issue 2 (5-2006)
Abstract
Background and Aim: One of the most important structural factors that facilitate patient’s acceptance of full denture, is adequate and appropriate retention. The objective of this study was to evaluate the retentive ability of four denture adhesives in vitro: Safe Saze-Gum Sealing-Denstet-Corega.
Materials and Methods: This experimental study was conducted in vitro on the basis of measurement of adhesion and cohesion forces between acrylic disk and glass, with denture adhesive applied between them. At first the retentive ability of alcohol, water and artificial saliva was measured and recorded as control. Then the retention ability of different adhesives mixed once with water and next with artificial saliva was measured and compared. The procedure was repeated 7 times for each denture adhesive with 7 similar acrylic disks. Data were analyzed using. ANOVA and paired t test with p<0.05 as the limit of significance.
Result: Comparison of four powder denture adhesives showed that the highest retentive ability was observed in Denstet and the lowest in Safe-Saze. The retentive ability of Gum-Sealing was higher than Corega.
Conclusion: Based on the results of this study, significant differences exist among the retention ability of different denture adhesives.
F. Nejatidanesh , O. Savabi , B. Sarrafpour , D. Mirabi ,
Volume 20, Issue 1 (5-2007)
Abstract
Background and Aim: Proper designing of partial denture frameworks is the duty of dentists, but this task is often abdicated to technicians because of lack of time and experience. Computer assisted learning and designing can be used for both training dental students and helping dentists design proper frameworks. As the first step to prepare software for framework designing, this study evaluated the agreement on different framework designing principles, among prosthodontists of dental schools in Iran.
Materials and Methods: A questionnaire consisting of 121 design rules was sent to 41 prosthodontists at seven dental schools in Iran .The percentage rate of agreement on results was used for data analysis.
Results: The percentage of rules accepted by more than 60% of the prosthodontists was 76.2%. It consisted 80% saddle rules, 76.2% rest rules, 78.4% clasp rules, 63.6% maxillary major connector's rules and 80.9% mandibular major connector rules.
Conclusion: The percentage of accepted rules by Iranian prosthodontists was 76.2%. Maxillary major connectors had the least acceptance.
F. Nejatidanesh , O. Savabi , B. Sarrafpour , D. Mirabi ,
Volume 20, Issue 2 (5-2007)
Abstract
Background and Aim: Designing removable partial dentures is one of the most important phases of prosthetic treatments. Computer can be used to facilitate and increase accuracy of removable partial denture design. The aim of this study was to develop a software for removable partial denture design.
Materials and Methods: A questionnaire (discussed in part I) and major textbooks, were used to determine the design rules. The software (RPD Graph) was developed using Visual C++ and Maryam program. The RPD Graph can determine the classification of partial edentulous arch. With defining the missing teeth and providing data about prognosis and conditions of abutment teeth, the removable partial design will be developed by RPD Graph. This software is a knowledge-based system which has specific characteristics. It can be used as an educational tool for teaching RPD design and as a clinical tool for supporting clinician's decision. In addition it can be developed to more complete softwares.
S. Nikzad, A. Azari, M. Khosravi, A. Nezadi,
Volume 21, Issue 3 (12-2008)
Abstract
Background and Aim: By definition, pontic is an artificial replacement of missing tooth (teeth) which is essentially used to establish function and esthetics. In order to this fact that, pontic(s) is not completely the same as tooth (teeth) to be replaced, it may not be concern as a simple type of restoration to achieve the best result, it must be design from the esthetically and hygienically point of view as well as comfort, demand and tissue health of patient. The main purpose of this study is to investigate the pontic designs and their relationship to edentulous partial aras.
Materials and Methods: 73 pontics in 57 patients have been included in this cross-sectional study. These patients were under treatment in the department of prosthodontics. A primary cast was achieved from each patient and then the cross-sectional contour of edentulous ridge was depicted. For each patient the type of pontic design was derived from textbook standards and then compared with the design of actual verified Prosthesis at delivery. The shape of tissue surface of each denture was determined by a low viscous impression material. The result of each comparison was recorded in a chart data set.
Results: The most common pontic design was Modified ridge lap with frequency of 93.2%. The type of ridge was %45.2 normal, %19.2 class I, %8.2 class II and %27.4 class III, respectively. %72.6 of pontics tested have inappropriate design in tissue surface.
Conclusion: It seems that in a high percentage of cases the tissue surface contour of prescribed pontics in department of prosthodontics was incorrect and more attention must be paid to the education of students and technicians.
A. Rohanian, Gh. Ommati Shabestari,
Volume 23, Issue 1 (6-2010)
Abstract
Microstomia is defined as an abnormally small oral orifice. Microstomia can occur as a result of trauma from electrical and thermal lesions, chemical burns and trauma from surgeries. Prosthetic rehabilitation of microstomia patients presents difficulties at all stages, from the preliminary impressions to fabrication of prosthesis. For impression procedures different treatment methods have been suggested. Swing hinge and collapsible dentures are used to provide prosthodontic treatment to patients with microstomia. Not only is such a prosthesis difficult to fabricate, but may be expensive. The literature contains reports on the fabrication of sectional denture with the denture pieces connected by different designs. This article describes a simple method of fabricating a 2-pieces denture using removeable partial denture metal framework to connect the sections, for a patient with limited oral opening. Combination of metal framework and sectional complete denture for a patient with limited oral opening is an acceptable, effective and available method.
S. Zarrati, T. Baheri Mghadam, F. Nematollahi,
Volume 24, Issue 1 (3-2011)
Abstract
Background and Aims: Nowadays, removable partial dentures are applied to patients who are not able to use dental implants or fixed prosthesis. Although based on the studies the users of removable partial dentures are in the risk of plaque accumulation and unacceptable changes such as gingivitis, periodontitis and mobility in abutment tooth. It is not clear whether the negative effects of removable partial dentures are more on the isolated teeth which are a kind of abutment adjacent to endentulous area in both sides. The purpose of this study was to investigate the clinical condition of isolated abutment teeth without splinting in comparison to control abutment from the aspects of B.O.P (bleeding on probing), mobility, pocket depth and gingivitis.
Materials and Methods: In this cross-sectional study, the prepared questionnaires were filled out by 50 patients who received removable partial dentures in department of removable prosthodontics of dental school of Tehran University of Medical Sciences. The patients had isolated abutment tooth and did not have any systemic disease. The obtained data were analyzed. Using Wilcoxon, exact Fisher and Kruskal-Wallis test.
Results: B.O.P (P=0.004), pocket depth (P=0.035), and mobility (P<0.001) in isolated abutments were more than those in control abutments, but there were not significant differences in the degree of caries (P=0.083) and gingivitis (P=0.07).
Conclusion: This study showed that clinical condition of isolated abutments is worse than that of control abutments. More attention should be paid to healthiness of isolated teeth without splinting and periodic follow ups should be done in these cases.
Sajjadi Farnaz Sadat , Nili Monireh ,
Volume 28, Issue 1 (5-2015)
Abstract
Background and Aims: Posterior palatal seal is one of the most important areas to support maxillary complete denture. The aims of this study was to evaluate the dimensional accuracy of both direct and indirect relining methods on the maxillary posterior palatal seal area.
Materials and Methods: A maxillary edentulous model was selected. A 1.5 mm layer of wax was placed on the model to create a space for relining material and impression was done by the silicone material and 20 casts was prepared. By putting the wax on the casts and performed of flasking, 20 dentures were prepared. Direct reline method (as Chair side with GC reline) and indirect method (with Acrosoft-TC and firing with Acropars 100) were evaluated. The relined bases were put on the model and the spaces between them in five points (two points on the ridge , two points in the deepest part of palate and one point in the middle of palate) were calculated by the Stereo microscope and each calculations was repeated 5 times and the mean dimensional changes was measured. To compare the groups, data were analyzed using multivariate analysis.
Results: The gap of P.P.S area was between 740.86 and 2356.49 . Direct method (1011.81±60.56) had a lesser gap in comparison with indirect (2056.8±13.13), and both method showed a significant statistic variance (P<0.0001).
Conclusion: Direct method showed a lesser gap in comparison with indirect method. By direct method adaptation of the denture in the P.P.S area would be better.
Mehran Bahrami, Maryam Memarian, Farinaz Khodadad Kashi,
Volume 28, Issue 3 (10-2015)
Abstract
Background and Aims: Residual ridge resorption is an unpredictable, unavoidable and time-dependent process which occurs in denture-wearing patients especially those who use mandibular dentures. This process causes more problems in mandible because of its less support, tongue forces and more resorption. Inserting implants in many of these patients requires bone grafts. Overdentures are also more expensive. Denture adhesives are the last option to improve retention and masticatory function in denture-wearers with severe resorption of alveolar ridge. Nowadays only a few denture adhesives are used in Iran and there is not much information about their standard features including, pH, bond strength and washability. The objective of this study was to examine and compare the mentioned characteristics of four denture adhesives (Professional, Corega, Fittydent and Fixodent) and to introduce the most suitable denture adhesive for clinical use.
Materials and Methods: All the methodologies of ISO 10873:2010 were applied. To measure the pH value, 1±0.1g of each denture adhesive was diluted with 5g of propylene glycol and mixed with water. Using pH meter, pH of each group was measured separately for 4 times (n=4) and results were recorded. For the washability test, 4 dentures were fabricated (n=4) and each group of denture adhesives was placed on a denture according to manufacture instructions. For simulating mouth environment specimens were placed in water at 37±2 ̊C bath for 1 hour and then washed with a plastic brush. Specimens were examined for any residual adhesive and the results were recorded. For bond strength test, a sample holder was gently filled with denture adhesives and was attached to the holding arm of bond strength testing device (Santam, STM 20, Iran). Specimens were placed in 300ml water bath at 37±2 ̊C for 10 minutes, and then shaken to be dried and placed in the bond strength testing device. 10N force with 5mm/min rate was applied to the specimen. The force was maintained for 30s and then device arm was pulled back and the highest number was recorded with computer software (Santam Machine Controller v4.19, Iran). The test performed 8 times (n=8) for each adhesive and 8 results were recorded. Data were analyzed using ANOVA test for comparing the bond strength with a significant level fixed
at 0.05.
Results: Professional and Corega adhesives had more neutral pH than that of Fittydent and Fixodent which were more acidic. Washability test showed no remaining mass of any adhesive and there was not any statistically significant difference between groups (P>0.05). Fittydent and Corega adhesives showed higher bond strength than that of Professional and Fixodent and this difference was statistically significant (P<0.05).
Conclusion: Professional and Corega adhesives had less acidity. Thus they cause less harmful effects on the oral mucosa than that of Fittydent and Fixodent and should be indicated in patients with little-tolerant oral mucousa such as diabetous, iron-deficiency anemia and hypertention. All the groups had acceptable washability. Fittydent and Corega had higher bond strength than that of Professional and Fixodent. Therefore in complete-denture-wearers who require more retention as a result of severe ridge resorption, macrotruma, and maladaptiivity, Fittydent and Corega seems to be more acceptable.
Shamsolmoulouk Najafi, Reza Yazdani, Behzad Salari, Homa Forouhesh Tehrani, Mohammad Javad Kharrazi Fard,
Volume 29, Issue 2 (11-2016)
Abstract
Background and Aims: The aim of this study was to investigate the effects of sodium bicarbonate against candida albicans, the main infectious factor of denture stomatitis, and to compare it with other common anti-candida medications.
Materials and Methods: Three concentrations of Candida albicans (105, 106, 107 CFU/mL) were prepared. Experimental substances were 5% sodium bicarbonate, nystatin, chlorhexidine, and sterile saline (as control). Each of them was added separately to the same amounts of Candida albicans of different concentrations, and sampled at the intervals of 1, 2, 3 and 4 min. Then, the samples were cultured and incubated. The number of formed colonies was counted for each plate. The data were analyzed, using ANOVA and Tukey test.
Results: Sodium bicarbonate showed a noticeable anti-candida effect on the concentrations of 105 and 106 CFU/mL, with almost similar anti-candida effect as nystatin and chlorehexidine(P=0.29, P=0.32). Nystatin was the most effective medication on the concentration of 107 CFU/mL of candida (P=0.03, P=0.01). Sodium bicarbonate and chlorhexidine were less effective in this concentration with no statistically significant difference (P=1.00).
Conclusion: Sodium bicarbonate showed a significant anti-candida effect at low and medium concentrations of Candida albicans, but nystatin was more effective in the higher concentrations.
Roxana Sadeghamalnikraftar, Maryam Rezai Dastjerdi, Hemat Gholinia, Babak Amoian,
Volume 32, Issue 1 (7-2019)
Abstract
Background and Aims: Removable partial denture (RPDs) is a common therapy for rehabilitation of partialy edentulous patients while RPD causes a lot of periodontal problems. The purpose of this study was to investigate the effect of RPDs made in Babol dental school on the periodontal health of abutment and non-abutment teeth.
Materials and Methods: In this cross sectional study, 70 patients who were candidates for RPDs divided into four groups according to Kennedy classification. The following periodontal parameters were evaluated for abutment and non-abutment teeth, plaque index (PI), calculus index (CI), width of keratinized gingiva, bleeding on probing (BOP), periodontal pocket depth (PPD), tooth mobility (TM) and gingival recession. This clinical measurement was taken immediately before insertion of the RPD, then one, three, and six months later. These parameters were then analyzed using Mann-Whitney, Independent sample t-test, Covariance, Chi-square statistical tests.
Results: In Class I; the mean score for the width of keratnized gingiva (P<0.001), PPD (P=0.002), and BOP (P<0.001) of the abutment and non-abutment teeth were significantly different after 1 month. After 3 months there were significant differences with regard to the PI (P=0.01), width of keratnized gingiva (P<0.001), BOP (P<0.001) and PPD (P<0.001). After 6 months, only the PI, CI, and TM parameters were not statistically significant. In Class II; the mean score for width of keratnized gingiva (P<0.001) and PI (P=0.002) after 1 month, width of keratnized gingiva (P<0.001), BOP (P=0.02), PPD (P=0.05) and TM (P=0.03) after 3 months and width of keratnized gingiva (P<0.001), PI (P=0.04), BOP (P<0.001) and TM (P=0.03) after six months were statistically significant. In Class III; only gingival recession did not show any significant difference at 1 and 3 months later. The width of keratnized gingiva (P<0.001), PI (P=0.001), BOP (P<0.001) and TM (P=0.03) after 6 months were statistically significant.
Conclusion: This study showed that RPDs affect the periodontal condition of both abutment and non-abutment teeth, which can be reduced by more precise design of the prosthesis, periodontal follow ups and good oral hygiene.
Sareh Habibzadeh, Mina Khayamzadeh, Asal Moravej, Afagh Tavasoli,
Volume 32, Issue 3 (11-2019)
Abstract
Background and Aims: Xerostomia is a clinical condition that can affect the quality and quantity of saliva. Saliva is considered an important factor in retention of edentulous patient’s denture wearers. Thus, increasing the prevalence of xerostomia in modern societies is considered a limiting factor in the quality of denture retention. This article reviews the most common techniques of denture manufacturing in edentulous patients with xerostomia and investigates the advantages versus disadvantages of each.
Materials and Methods: In this review, PubMed and google scholar search engines were searched for the following keywords: Flexible Denture, Artificial Saliva Reservoir, Hyposalivation, Hypofunction, and Xerostomia. We evaluated the flexible dentures and dentures with artificial saliva reservoirs in both jaws along with their advantages and disadvantages. 10 articles, specifically discussing complete denture fabrication in patients were selected.
Conclusion: Follow-up results showed that the flexible dentures and split dentures with saliva reservoirs to be effective in improving the quality of life of these patients and therefore can be a considered as a successful treatment option in the prosthetic rehabilitation of these patients.
Shiva Shirazian, Sakineh Nikzad Jamnani, Maryam Memarian, Homa Shaghi,
Volume 33, Issue 1 (7-2020)
Abstract
Background and Aims: Due to the very high importance of assessing the clinical performance of students, choosing the best assessment tool and method is one of the most important goals and tasks in medical education. The objective of this study was the development of a checklist for the assessment of dental students’ clinical skills of Tehran University of Medical Sciences, in the clinical complete denture course. The second aim was to determine the validity and reliability of the checklist, and The third aim was the evaluation of raters’ and students’ satisfaction.
Materials and Methods: The checklist was developed in expert panel sessions, and the validity and reliability of the checklist were assessed with CVI (content validity index) test-retest and inter-rater reliability methods, respectively. Students (n=15) were evaluated with a developed checklist. At the end of the session, the satisfaction level of staff and students were assessed. The obtained information was reported descriptively with the expression of mean and standard deviation and in the form of relative and absolute frequencies.
Results: The content validity index (CVI) of the checklist was 0.96. The reliability of the checklist confirmed with a high Intraclass Correlation Coefficient (>0.8) (between 0.82-0.97) (P<0.05). The coefficient of agreement in inter-rater reliability was 0.99 (between 0.991-0.998). Raters’ and students’ satisfaction earned a high percentage of satisfaction.
Conclusion: The designed checklist has the optimal features of a good students’ clinical performance assessment tool; it seems that using this checklist can be an excellent alternative method to a global rating scale to assess the clinical skills of dental students in the complete denture courses.
Elnaz Moslehifard, Tahereh Ghaffari, Negin Farhangi,
Volume 33, Issue 2 (8-2020)
Abstract
Background and Aims: Different materials have been used to make dentures during different years. Teeth used in making dentures should have appropriate physical and mechanical features to meet the needs of masticatory functions, meanwhile having desired beauty. The aim of the present study was to determine the frequency of previous denture material and f its form and the duration of use in patients referring to the prosthesis department of Tabriz Dental School during 1385 to 1395.
Materials and Methods: This cross-sectional descriptive study was performed on the basis of paraclinical examination on all cases of removable prostheses in patients referring to the department of prosthodontics of Tabriz University of Medical Sciences from 1385 to 1395. Based on the files, the percentage of frequency of previous denture type, previous denture tooth material, previous tooth form, previous time of denture using during the day and night were statistically evaluated by SPSS20 software.
Results: The results of this study showed that out of 471 patients, 151 people used removable dentures. A study of previous denture material showed that the frequency of using dentures containing resin teeth with 48.3% was much higher than porcelain teeth with 13.8. Examination of the dental form showed that in 13.8%, the dental form was with a cusp, in 48.3% without a cusp and in 37.9% the type and form of the teeth were not clear (P<0.01). Evaluations showed that 24.1% of patients used their dentures only during the day and 41.4% of patients used them overnight.
Conclusion: A 10-year study of patients with dentures at the Tabriz School of Dentistry documented the common use of resin teeth denture, as well as overnight use of them and the non-cusp form of denture teeth.
Sara Mogharrabi, Safoura Ghodsi, Majed Kooti, Asadallah Ahmadzadeh, Neshatafarin Manouchehri,
Volume 33, Issue 3 (10-2020)
Abstract
Background and Aims: Removable partial denture (RPD) is a common treatment to restore partially edentulous areas; however, a limited number of studies have been made on oral hygiene habits among patients with RPD. The aim of this study was to evaluate the patients’ knowledge about various cleaning methods of RPD to consciously improve hygienic habits of the patients.
Materials and Methods: This study was a cross-sectional study performed on 96 RPD patients referred to Jundishapur faculty of dentistry from 1395 to 1396. Demographic data namely age, sex, level of education, and other information about general health status, duration of dentures usage, and denture cleaning frequency were taken by the census through questionnaires. The descriptive statistics, chi-square, and T-test were used for statistical analysisof data (P<0.05).
Results: The patient age, sex, and smoking habits had significant effects on the prosthesis maintenance habits (P<0.05). The patients over 50 years of age, females, and nonsmokers significantly preferred dipping method over other RPD storage methods (P<0.05). The frequency of denture cleaning was significantly greater in males (53.3%) compared to females (23.9%) (P<0.05).
Conclusion: According to the results of this study, most RPD patients did not clean their dentures appropriately and have little knowledge on how to maintain and clean them. Regular and periodic recall and written instructions might be helpful to improve patients' awareness on proper cleaning and maintenance of partial dentures.
