Journal of Dental Medicine

One of the major goals of periradicular surgery is to create a good apical sea! at the apex. This is done by sectioning of 2 to 3mm from the apex, preparation of a class I cavity and filling with a biocompatible material.The purpose of this in vitro study was to determine whether ultrasonic units used for root end preparations could change the surface & structure of resected root ends, as competed to common methods of retropreparation. Eighty-five extracted single rooted teeth were divided into five similar groups. Then instrumented and filled with lateral condensation method. Then three millimeter of apex was resected, retropreparaiions in two groups were done with low speed handpiece and round V) ^ur and cavities in two other groups prepared with the highest power of dentspiay ultrasonic unit with TFI-10 tip and in one other group prepared with the highest power of neo sonic ultrasonic unit with diamond coated CT-1 retro tip.Following root resection and retropreparation the surface of resected root ends were examined for the presence of any cracks or structural changes on the surface of resected root ends with stereo microscope 50x.The results of this study showed thai high power settings of ultrasonic units can increase the potential of crack formation on resected root surfaces. In conclusion it is better to use low power setting of ultrasonic for retropreparation.

One of the major goals of preradicular surgery is to create a good apical seal. This can be done by sectioning approximately one third of the apex, preparation of a class I cavity, and filling with a biocompatible material. The purpose of this in vitro study was to compare crack propagation in retro filling with two commercially available amalgams. Thirty-four extracted single rooted teeth were divided into two groups. After instrumentation and filling with Gutta percha by lateral condensation method, three millimeter of apex was resected and retro preparations were done by a low speed hand piece and '/> round bur. Then cavities were filled with cinalloy and luxalloy amalgam in-group "one" and "two" respectively. The surface of resected root ends was examined in two stages, after doing retro preparation and retro filling and the presence of any cracks or structural changes was inspected by stereomicroscope 50x. Regard to number and type of cracks, the result of this study showed that there was no significant difference between cinalloy or luxalloy retro fillings. By considering the conditions of this study, cinalloy amalgam can be used as a retro filling material.

Dentin bonding agents create stronger bonding between dental composites and dentin. But, none of them can prevent the microleakage. The important factors of progressing microleakage are the stress of polymerization shrinkage of resin composite and removal of smear layer in total-etch technique. The aim of this study was the evaluation of the effect of experimental method (modifying smear layer and etching of enamel margin) and comparison with the total-etch technique. In this experimental method, 60 extracted human molar teeth were disinfected. Then, class 5 cavities were prepared on the buccal surface and 1 mm above CEJ. The specimens were divided randomly to 6 groups with iO samples in each group. The specimens groups were:
1- Scotchbond Muiti- Purpose Plus Adhesive System (S.B.M.P.P) +Tetric composite
2- S.B.M.P.P + Ariston composite
3- Ariston liner + Ariston composite
4- S.B.M.P.P without enamel and dentin etching + Tetric composite + rebonding with Flowable Tetric
5- S.B.M.P.P without enamel and dentin etching + Ariston composite + rebonding with Flowable Tetric
6- S.B.M.P.P without enamel and dentin etching + Tetric composite
After finishing and polishing, the specimens were termocycled, stained with fushin, sectioned within the specimens and evaluated for dye penetration with stereomicroscope. Wilcoxon Sign and Kruskal Wallis tests were used for statistical analysis.
Results showed that group 3 had microleakage more than groups of 1, 2 and 5 (P<0.0 5) and this difference was significant. There was no significant difference among the other groups.

Statement of Problem: Different materials have been suggested for endodontic surgeries. One of the most important characteristics of filling materials is their biocompatibiiity.
Aim: The aim of this research was to evaluate the biocompatibiiity of four different root end filling materials.
Material and Methods: In this study, 20 male Guineanpigs from English short hair breed, weighing 600-700 grams, were selected. The animals were classified into two groups. In the first group, amalgam and composite and in the second group MTA and Glass Ionomer were examined. The testing materials were shaped into cylindrical form with 1 mm diameter and 1.5 mm height. After general anesthesia, two
cavities with 1mm diameter and 2 mm depth were prepared in parasymphysis area of animal jaw. The prepared materials were implanted in these cavities and the flaps were sutured. After 80 days, the animals were sacrificed and the dissected bones, with implanted materials inside them, were sent for histological evaluation. The histological findings were statistically analysed by Kruskal Wallis and x'tests.
Results: No significant differences were shown in the degree of inflammation, the type of inflammatory cells adjacent to the tested materials and the type of tissue response, induced in the vicinity of these four materials during 80 days.

Conclusion: Regarding biocompatibiiity, there was no significant difference among amalgam,composite, MTA and glass Ionomer in endodontic surgeries.

Background and Aim: Today several materials have been used for root- end filling in endodontic surgery. Optimal properties of Pro Root MTA in in-vitro and in-vivo studies has been proven. On the other hand, based on some studies, Root MTA (Iranian Pro Root MTA) and Portland cement are similar to Pro Root MTA in physical and biologic properties. The aim of this study was to evaluate bacterial leakage (amount and mean leakage time) of four root- end filling materials.

Materials and Methods: In this experimental in-vitro study, seventy six extracted single- rooted human teeth were randomly divided into six groups for root-end filling with gray Pro Root MTA, white Pro Root MTA, Root MTA (Iranian Pro Root MTA), Portland Cement (type I) and positive and negative control groups. Root canals were instrumented using the step- back technique. Root- end filling materials were placed in 3mm ultra sonic retro preparations. Samples and microleakage model system were sterilized in autoclave. The apical 3-4 mm of the roots were immersed in phenol red with 3% lactose broth culture medium. The coronal access of each specimen was inoculated every 24h with a suspension of Streptococcus sanguis (ATCC 10556). Culture media were observed every 24h for colour change indicating bacterial contamination for 60 days. Statistical analysis was performed using log- rank test with P<0.05 as the limit of significance.

Results: At the end of study 50%, 56.25%, 56.25% and 50% of specimens filled with Gray Pro Root MTA, White Pro Root MTA. Root MTA and Portland Cement (type I) had evidence of leakage respectively. The mean leakage time was 37.19±6.29, 36.44±5.81, 37.69±5.97 and 34.81±6.67 days respectively. Statistical analysis of data showed no significant difference among the leakage (amount and mean leakage time) of the four tested root- end filling materials (P=0.9958).

Conclusion: Based on the results of this study, there were no significant differences in leakage among the four tested groups at 60 days. The results suggest that Root MTA and Portland Cement can be used as less expensive root filling materials.

Background and Aim: Achieving appropriate seal in canal obturation is the main goal of endodontic therapy. However, in some cases, it can not be obtained by non-surgical procedures alone. Retrograde surgery is one of the most common procedures in endodontics. Apical seal improvement can be obtained by root end filling and decreasing the root end resection angle (bevel angle). The aim of this study was to investigate the role of bevel angle on apical microleakage following the use of amalgam and MTA as root end filling materials.

Materials and Methods: In this experimental study, 128 extracted human teeth were instrumented and obturated by lateral condensation technique. The teeth were divided into two groups and the apical root resection was performed by high speed fissure bur (one group perpendicular to the long axis of the teeth and the other 45 to the long axis. The 3 mm root end cavity was prepared by ultrasonic device. Each group was divided into two subgroups: One filled with amalgam and the other with MTA. Teeth were incubated for 72 h, covered by two layers of nail polish (except for apical 3mm) and submerged in methylene blue for 48 h. Teeth were washed under tap water and mesiodistally dissected by low speed disc. Dye penetration was evaluated by stereomicroscope. Data were analysed by two way ANOVA and Tukey tests with p<0.05 as the limit of significance.

Results: The results showed that retrofill material type had a significant effect on microleakage and MTA was superior to amalgam in this respect. Bevel angle failed to show any significant effect on apical microleakage.

Conclusion: Based on the results of this study, it seems that the use of MTA instead of amalgam in clinical practice can improve the success rate of endodontic surgery whereas the bevel angle can be determined based on the status of each individual case However, increasing the bevel angle seems to increase microleakage due to exposure of more dentinal tubules.

Background and Aim: Extensive studies on the epidemiology of teeth and oral diseases are an important part of health care programs specially for hearing impaired groups. For adequate programming in this field, proper situation analysis is mandatory. The aim of this study was to assess the DMFT (decayed missed filled teeth) of 12 years old students attending hearing impaired schools in Tehran and exploring the relation between sex, hygiene and hearing threshold with the index.

Materials and Methods: This cross sectional descriptive study was based on examining 12 years old (± 6 month) students (117 cases) attending hearing impaired schools in Tehran. A questionnaire was filled for each case. T, Chi-square and Kruskall-Wallis tests were used to analyze the results with p<0.05 as the limit of significance.

Results: The mean DMFT in these students was 3.07. Mean DMFT in students with very severe hearing loss was 2.99. Mean ranked DMFT in girls and boys was similar (56.09 in boys and 61.96 in girls). Mean ranked DMFT in students who didn’t use floss (66.40) was higher than those who used floss (46.71). Mean ranked DMFT in students who seldom brushed, was the highest (72.82) and in students who brushed once a day was the lowest (51.26).

Conclusion: The DMFT index in hearing disabled children was 3.07. Regular brushing and flossing reduced the index.

Background and Aim: Three Dimensional obturation of root canal is one of the main goals of root canal therapy to preserve health or reach the regeneration or healing of periapical tissues. Root end filling materials are used in numerous situations to reach the mentioned goals. One of the common root end- filling materials is mineral trioxide aggregate (MTA) which the foreign and Iranian ones are different in their prices. The aim of this study was to compare the rat connective tissue reaction to Iranian and foreign MTA.

Materials and Methods: This was an animal study in which 40 rats were divided into 5 groups of each 8. The polyethylene tubes filled with foreign (Pro Root MTA) and Iranian (Root MTA) white MTA and were implanted in subcutaneous connective tissue. Similarly, the empty tubes were inserted in subcutaneous connective tissue as control group. The samples were examined histologically after 7, 14, 30, 60 and 90 days and were scored as followings: 0, was characterized to samples without inflammatory cells without inflammatory reaction 1, for samples with less than 25 inflammatory cells mild inflammatory reaction. 2, for samples with 25 to 125 inflammatory cells moderate inflammatory reaction and 3, for ones with more than 125 inflammatory cells severe inflammatory reaction. The data were analyzed using Kruskal-Wallis test and p<0.05 was considered as the level of significance.

Results: In general, inflammatory reactions were reduced in all groups. Experimental groups had moderate to severe inflammation in the 7th day which had significant difference with the control group having mild to moderate inflammation (p=0.04). There was not any significant differences between experimental and control group in 14th, 30th, 60th and 90th days (p>0.05).

Conclusion: Based on the findings of this investigation, inflammatory subcutaneous connective tissue reaction to Iranian (Root MTA) and foreign (Pro Root MTA) MTA was the same.