Showing 38 results for Led
R. Aghandeh , M. Emamieh ,
Volume 12, Issue 1 (8-1999)
Abstract
This investigation was performed according to the widespread application of base metal alloys and few articles published about the marginal integrity of restorations fabricated by these metals.Three standard dies of a maxillary first premolar were prepared with a flat shoulder finish line in buccal aspect and chamfer in palatal. One of them left with no change. On the buccal aspect of the second and third dies 135?and 1607 bevel were added respectively Using dual wax technique, nine wax patterns were formed on each die and casting procedure of selected non precious alloy was performed by centrifugal method. Marginal gaps of each copping seated on dies were measured by scanning electron microscope (SEM) with X500 magnification. Measurements were done on three areas of marked dies on buccal aspect. Measurement son palatal aspect was done on marked midpalatal point as control.Results and statistical analysis showed no significant difference among marginal gaps in lingual aspect.But on the buccal aspect there were statistically significant differences among the groups (P<0.001). Flat shoulder had the best marginal integrity (mean 4 micron). Shoulder with 160' bevel had the most marginal gap (mean 26.5 micron) and shoulder with 1357 bevel was between two other groups (mean 15.7 micron).
Ma. Behnaz , F. Behnaz , M. Mohammadzadeh ,
Volume 17, Issue 1 (4-2004)
Abstract
Statement of Problem: Hepatitis C is a relatively common infection which can be transmitted through accidental inoculation consequently dentists are highly at the risk of exposure to this virus.
Purpose: The aim of this study was to determine prevalence of Hepatitis C among the dentists of Yazd and to evaluate their knowledge about the existing ways for the transmission and prevention of this infection.
Materials and Methods: In this descriptive- analytic study which was performed periodically (2002), the sera of all dentists practicing in Yazd were tested (104 samples) in the laboratory of Yazd blood transfusion organization initially by 1st generation of Elisa for Anti HCV followed by Riba on positive samples to confirm the results. Meanwhile a questionnaire assessing their knowledge about hepatitis was completed the by the dentists. Data were analyzed by ANOVA and t test.
Results: None of the one hundred and four samples of sera were positive for Anti HCV. Mean score of their knowledge was 14.80 (of 20). The knowledge of 92.1% of them was at moderate to high level. No significant difference was observed between Yazd's dentists knowledge about hepatitis C in different age, gender and length of professional experience groups.
Conclusion: According to this study, the absence of HCV among the dentists of Yazd is mainly attributed to the low prevalence of HCV infection among general population, though it can also be an indicative of the knowledge and excellent performance of the dentists to prevent the transmission of infection through blood and saliva.
E. Yasini , E. Malekan ,
Volume 18, Issue 1 (3-2005)
Abstract
Statement of Problem: The use of dentine bondings on enamel and dentin in total etch protocols has recently become popular. Unfilled resin is hydrophobic and dentin bonding is hydrophilic in nature. This chemical difference could be effective in enamel bonding process. Purpose: The aim of this study was to compare the shear bond strength of unfilled resin to dry enamel and dentin bonding to dry and moist enamel.
Materials and Methods: In this experimental study, a total of 30 incisor teeth were used. The specimens were randomly assigned to three groups of 10. 37% phosphoric acid etchant was applied to the enamel surfaces in each group for 15 seconds, rinsed with water for 20 seconds and dried for 20 seconds with compressed air in groups one and two. After conditioning, group 1 received unfilled resin (Margin Bond, Colten) and group 2 received dentin bonding (Single Bond, 3M) and in group 3 after conditioning and rinsing with water, a layer of dentin bonding (Single Bond) was applied on wet enamel. The enamel and dentin bonding were light cured for 20 seconds. A ring mold 3.5 mm in diameter and 2 mm height was placed over the specimens to receive the composite filling material (Z100, 3M). The composite was cured for 40 seconds. The specimens were thermocycled and shear bond strengths were determined using an Instron Universal Testing Machine. The findings were analyzed by ANOVA One-Way and Tukey HSD tests.
Results: Shear bond strength of dentin bonding to dry enamel was significantly less than unfilled resin to dry enamel (P<0.05). There was no significant difference between the bond strength of dentin bonding to moist and dry enamel. In addition bond strength of dentin bonding to wet enamel was not significantly different from unfilled resin to dry enamel.
Conclusion: Based on the findings of this study, it is suggested that enamel surface should remain slightly moist after etching before bonding with single bond but when using unfilled resin, the enamel surface should be kept dry.
M. Hasani Tabatabaei , M. Mirzaei , M. Ataei , F. Motevaselian ,
Volume 18, Issue 4 (1-2006)
Abstract
Background and Aim: The majority of commercial curing units in dentistry are of halogen lamp type. The new polymerizing units such as blue LED are introduced in recent years. One of the important side effects of light curing is the temperature rise in composite resin polymerization which can affect the vitality of tooth pulp. The purpose of this study was to evaluate the temperature rise in two different composite resins during polymerization with halogen lamps and blue LED.
Materials and Methods: This experimental study investigated the temperature rise in two different composites (Hybrid, Tetric Ceram/Nanofilled, Filteke Supreme) of A2 shade polymerized with two halogen lamps (Coltolux 50, 350 mW/cm2 and Optilux 501 in standard, 820 mW/cm2 and Ramp, 100-1030 mW/cm2 operating modes) and one blue LED with the intensity of 620 mW/cm2. Five samples for each group were prepared and temperature rise was monitored using a k-type thermocouple. Data were analyzed by one-way ANOVA, two-way ANOVA and Tukey HSD tests with P<0.05 as the limit of significance.
Results: Light curing units and composite resins had statistically significant influence on the temperature rise (p<0.05). Significantly, lower temperature rise occurred in case of illumination with Coltolux 50.There was no significant difference between Optilux 501 in standard curing mode and LED. Tetric Ceram showed higher temperature rise.
Conclusion: According to the results of this study the high power halogen lamp and LED could produce significant heat which may be harmful to the dental pulp.
H. Alaghehmand , H. Safarcherati , F. Ghasemzadeh Azar ,
Volume 19, Issue 3 (6-2006)
Abstract
Background and Aim: Sufficient polymerization is a critical factor to obtain optimum physical properties and clinical efficacy of resin restorations. The aim of this study was to evaluate wear rates of composite resins polymerized by two different systems Light Emitting Diodes (LED) to and Halogen lamps.
Materials and Methods: In this laboratory study, 20 specimens of A3 Tetric Ceram composite were placed in brass molds of 2*10*10 mm dimensions and cured for 40 seconds with 1 mm distance from surface. 10 specimens were cured with LED and the other 10 were cured with Halogen unit. A device with the ability to apply force was developed in order to test the wear of composites. After storage in distilled water for 10 days, the specimens were placed in the wear testing machine. A chrome cobalt stylus with 1.12 mm diameter was applied against the specimens surfaces with a load of 2 kg. The weight of each samples before and after 5000, 10000, 20000, 40000, 80000 and 120000 cycles was measured using an electronic balance with precision of 10-4 grams. Data were analyzed using t test and paired t test. P<0.05 was considered as the limit of significance.
Results: Mean weight in both groups had statistically significant difference before and after all cycles (P<0.05). In halogen group 5000 and 10000 cycles led to significant difference with 40000, 80000 & 120000 cycles (P<0.05). In LED group 20000 cycles had significant difference with both 5000 and 120000 cycles (P>0.05).
Conclusion: Based on the results of this study, LED and halogen light curing units resulted in a similar wear rate in composite resin restorations.
M. Hasani Tabatabaei , M. Mirzaei , M. Ataei , F. Motevaselian ,
Volume 20, Issue 2 (5-2007)
Abstract
Background and Aim: Halogen lamp is the commonly used light source for composite photo polymerization. Recently, high power halogen lamps, LED and plasma arc are introduced for improving the polymerization. The aim of this study was to investigate the effect of conventional and high power halogen lamps and LED light curing unit on degree of conversion of two different composite resins.
Materials and Methods: In this in vitro experimental study two halogen units (Coltolux 50 with the intensity of 330 mW/cm2 and Optilux 501 with two different operating modes of standard with the intensity of 820 mW/cm2 and Ramp with the intentsiy of 100-1030mW/cm2) and one LED light curing unit (620 mW/cm2) were used. The composites were hybrid (Tetric ceram) and nanofilled (Filteke supreme). Each materials/curing method contained three samples and degree of conversion (DC) was measured with FTIR. Data were analyzed statistically with one way and two way ANOVA, Tukey HSD. P<0.05 was considered as the limit of significance.
Results: Tetric ceram revealed higher DCthan Supreme. Tetric ceram showed a significant decrease in DC when Coltolux 50 was used in comparison to LED and Optilux 501. The latters did not show significant effect on DC of this material. DC of Supreme polymerized with various curing modes was not significantly different.
Conclusion: Based on the results of this study, degree of conversion in hybrid composites was higher than nanofilled. In comparison with conventional halogen lamp (Coltolux 50), high intensity halogen lamps and LED unit significantly lead to higher degree of conversion in hybrid composites.
M. Hashemipour, Mr. Korki,
Volume 21, Issue 3 (12-2008)
Abstract
Background and Aim: Infective endocarditis is a rare disease resulted in mortality and morbidity in 10-80% of patients. The purpose of present study was to investigate the knowledge of guidelines on antibiotic prophylaxis for bacterial endocarditis in a group of Iranian dentists.
Materials and Methods: This was a descriptive study in which the population under study was 205 who were participated in the 47th international congress of dentistry (Tehran-Spring 2007) and they were chosen by census sampling methods. Nameless questionnaires were designed and were given to the dentists to complete. The t-test, χ² and spearman with the SPSS 13.5 program were used in the data analysis. P<0.05 was considered as the level of significance.
Results: Regarding to the prescribing of prophylactic antibiotic for patients with prosthetic cardiac valves, 94.6% of all answers were correct. Also, the most common procedures in which the prophylaxis antibiotic was distinguished to be necessary were periodontal surgery, scaling, dental extraction and using subgingival cord, respectively. More than half of the dentists (65.8%) had chosen amoxicillin as a prophylactic antibiotic. Mean knowledge score was 38.77±12.4.
Conclusion: Results of the present study showed that the knowledge of dentists about prescribing antibiotics for prevention of bacterial endocarditis is relatively low. It was also found that the level of knowledge decreases by passing time from graduation.
T. Jafarzadekashi, M. Erfan, M. Mirzaie, S. Kalbasi,
Volume 22, Issue 1 (8-2009)
Abstract
Background and Aim: Extent of polymerization (Ep) is the rate at which methacrylate C=C bonds are converted to aliphatic C-C bonds. The higher the Ep value, the better the polymerization of the polymer. If the polymer dose not polymerize sufficiently, it could have destructive effects e.g. releasing monomer, initiator, free radical or insufficient polymerization of hybrid layer. Therefore, measuring the Ep value is very important. Light-emitting diodes (LEDs) are becoming increasingly popular in dental practice as they have a long life expectancy. LEDs do not generate infrared wavelength, and have a constant light output. Therefore, comparison of LED and Quartz tungsten halogen (QTH) from the point of Ep is important. Differential Scanning Calorimetry (DSC) is a proper tool for determining the Ep value, monitoring the process of reaction and reaction kinetics. The aim of this study was to measure the Ep value of a dental bonding containing camphorquinone/amine photoinitiator which were cured by LED and QTH using DSC.
Materials and Methods: In this experimental study, 2.5 mg of bonding material were placed in DSC aluminum pans. Two different light cures, LED & QTH (Coltene Company Coltolux ®75 LED Curing Light), were used in this study. The light guide was positioned at a distance of 9mm from the base of the sample chamber. Each sample was photopolymerized for 30 seconds, and the DSC curves were obtained after 100 seconds from initiation of photopolimerization of each sample, at both 23oC and 37oC. The heat of photopolymerization (DH) was calculated from the area under the peak of the differential temperature curve. Five samples were used for each condition. The data was analyzed by two-way ANOVA.
Results: There was highly significant difference between two temperatures in the experimental bonding (pvalue<0.001). Representative DSC curves showed the same kinetic behavior for LED and QTH.
Conclusion: The results revealed that the Ep generated by high power density QTH was the same as that of produced by second generation of LED.
A. Taghizadeh Ganji , A. Jafari, N. Poorgholi, H. Iranizadeh,
Volume 22, Issue 3 (12-2009)
Abstract
Background and Aim: School health workers have an important role in education and prevention of common oral and dental diseases. An organized program can be helpful in training and shaping the proper behavior. This study has evaluated the knowledge, attitude and practice of schools health workers in Tabriz about oral and dental health in 2007-2008.
Materials and Methods: This cross-sectional and descriptive study was performed in primary schools in Tabriz. Questionnaires were sent to the schools that had health workers. Levels of the knowledge, attitude and practice of the health workers who had answered this questionnaire were evaluated. SPSS software and independent T-Test and Paired- Sample T-Test were used for analyzing the results.
Results: Fifty eight out of 64 school health workers were women. Mean age of school health workers was 45 years. Forty four of school health workers had passed special course about oral health and dental health. 49 of them had passed special educational course the mean of acquired knowledge score was 6.77 out of 10 and women's scores were significantly higher. Also women had more work experience than men. The mean of acquired attitude and practice scores were 7.42 and 7.14 out of 10, respectively.
Conclusion: Findings show that performing of the educational courses during work and experience has an effective role in the scales of the health workers. Progress in this situation can be achieved by retraining programs and accessible pamphlets.
A. Jafari, Mr. Khami, R. Yazdani, M Mohammadi,
Volume 22, Issue 4 (1-2010)
Abstract
Background and Aims: The objective of the present study was to investigate knowledge and attitude of senior dental students towards HIV/AIDS. Its result could help in promotion of education.
Materials and Methods: This educational research was carried out in two state dental schools in Tehran. The senior dental students in Tehran and Shaheed Beheshti dental schools were asked to fill in a self-administered questionnaire regarding their age, gender, parents' job, knowledge and attitudes towards treatment of patients with HIV/AIDS in Autumn semester 2007. Fifty five dental students (83%) including 27% male and 73% female in Shaheed Beheshti and fifty five dental students (85%) including 34% male and 66% female in Tehran dental schools were participated. The score for knowledge and attitude of the students were calculated separately. The data were analyzed using Independent sample t-test.
Results: The mean percentage of knowledge and attitude scores were 76.5% (at rang 1-3) and 50% (at range 1-5), respectively. Nearly all of the students believed that all patients should be considered as HIV positive in dental practice, while 49% preferred to refer HIV positive patients. Knowledge and attitude of students were not significantly associated with the gender and knowing HIV positive person (P>0.05).
Conclusion: There is a need to improve knowledge and attitudes of dental students towards HIV/AIDS. It is suggested to emphasize on this subject in dental schools curriculum in Iran.
A. Jafari, M. Amir Soltani, B. Golestan, N. Bahrami,
Volume 23, Issue 4 (1-2011)
Abstract
Background and Aims: Fissure sealant therapy is a national program in elementary schools in Iran. Therefore, evaluation of the parents' knowledge and attitude is necessary to improve the program.
Materials and Methods: In this cross-sectional and descriptive-analytic study, Iranian students were chosen in a randomized cluster manner. The questionnaires were filled-out by students' parents to evaluate their general information, knowledge, and attitude. Moreover, students were examined for having any fissure-sealed teeth. Data were collected and analyzed by multiple logistic regression tests.
Results: 414 boy students and their parents were participated in this study. 57.6% of parents knew that fissure sealant prevents the caries and 44.5% believed that fissure sealant is important to prevent caries. However, only 8.9% of children had fissure sealant. Parents' knowledge was significantly related to the source of oral health information and oral health education. Regular dental visits and high level education was effective in increasing the knowledge about sealant therapy. There was a significant relation between parents' attitude toward fissure sealant and level of education, oral health education and numbers and times of dental visit (P<0.001). There were a significant relation between tooth sealing and parents' oral health information.
Conclusion: Regular dental visits and oral health education have positive role in parent's knowledge and attitude and practice. So parents must be encouraged to have regular dental visit and dentists must be emphasized to give them necessary education. School is the best place for giving proper information to parents.
F. Amini, F. Soboti, M. Shariati, Z. Zoshad Haghighi,
Volume 24, Issue 2 (4-2011)
Abstract
Background and Aims: Considering the application of recycled metallic brackets in orthodontic treatments and probably more resultant metal ion release, which can cause cytotoxic side effects, this study was set up to assess the effect of recycling process of orthodontic brackets on metal ion release.
Materials and Methods: In this experimental study, 80 Discovery direct bond brackets (Dentarum, Germany) were divided into 2 groups, new and recycled brackets (n = 40), then each group was divided into two subgroups (one-week and 6-months subgroups) (n=20). The specimens were maintained in buffered solution of NaNHNo3 (pH=7) at 37°C in an incubator. After periods of one week and 6 months immersion, 0.5 mL of each solution was analyzed by spectrophotometry for the quantity of released Nickel (Ni), Chromium (Cr), and Cobalt (Co) ions. The data were analyzed using two way ANOVA analysis.
Results: After one week, the quantity of Ni, Cr, and Co ions released from new brackets were 0.65, 1.4, and 0.75 (ppb), respectively. The values for recycled brackets were 142, 2.61, and, 1.43 (ppb). These findings indicated significant difference between two groups (P<0.001). After six months, the quantity of Ni, Cr, and Co ions released from new brackets were 1200, 3.4, and 2.4 (ppb) and from recycled brackets were 2330, 6.9, and 10.8 (ppb), which showed significant difference between two groups (P<0.001).
Conclusion: Application of recycled brackets in long fixed orthodontic treatments can lead to metal ion release, specifically Nickel. Thus, the use of recycled brackets in long orthodontic treatments is not recommended.
Ayob Pahlavan, Masumeh Hasani Tabatabaei, Sakineh Arami, Mohammad Ataie, Sara Valizadeh,
Volume 26, Issue 1 (3-2013)
Abstract
Background and Aims: Polymerization shrinkage in Methacrylate-based composite is one of the most important factors in composite restorations failure. Silorane-based composite is introduced to compensate this drawback and claimed to have low shrinkage. The aim of this study was to evaluate the polymerization shrinkage of these two composites.
Materials and Methods: In this experimental study, 5 disk shape samples for each resin composites were placed in the centre of metallic ring bonded to microscopic glass slab. Top surface of ring was covered by a glass cover slip. Glass slab and sample were placed on a special LVDT holder in order to light cure from bottom surface and to measure the polymerization shrinkage. In this study, Deflecting Disk method and LVDT (linear variable differential transducer) was used for dimensional change measurement of resin composites. In this study, two LED curing units were used for composite polymerization.
Results: The mean of polymerization shrinkage in Z250 cured with LED and High Power LED was 11.15±0.08µm and 11.51±0.17µm, respectively (P=0.094), and in P90 cured with LED and High Power LED was 1.08±0.06µm and 1.16±0.12µm, respectively (P=0.019).
Conclusion: Silorane-based composite (P90) showed significantly less polymerization shrinkage than that of methacrylate-based composite (Z250). For the two types of composite, there was no significant difference between the two curing units in polymerization shrinkage.
Simin Zahra Mohebbi, Reza Yazdani, Seyedeh Tahereh Mirmolaei, Zeinab Tartar, Atoosa Janeshin,
Volume 26, Issue 4 (1-2014)
Abstract
Background and Aims : As midwives are in frequent contact with pregnant mothers, they may play a key role in their oral health care (OHC). In this study, we aimed to evaluate the effect of an educational program on Tehran University of Medical Sciences midwifery students’ knowledge and preparedness on OHC in pregnant mothers. Materials and Methods: The midwifery third year students of central campus (n=29) were randomly selected as intervention group and their counterparts in Hemmat campus (n=33) as control. Students in both groups were asked to fill in a questionnaire included 8 demographic question and 18 OHC knowledge and one question on their preparedness to implement OHC. Then the educational intervention was implemented using lecture, demonstration of the correct methods of brushing and flossing on the models and role play method. The follow- up questionnaire was delivered 3 months later. Data were analyzed using Mann-Whitney test, T-test, Chi-Square test, ANOVA and Regression by SPSS software.
Results: The mean OHC in pregnancy knowledge score in intervention and control group were 26.7 and 24.8 at baseline which were changed into 48.5 and 29.1, respectively (P<0.001). Among the students 52.6% in the intervention group and 36.4% in the control group reported very high preparedness to implement OHC in pregnancy. These figures were 68.2% and 41.7% in the post-test.
Conclusion: The promising findings of this educational intervention comprising of both student and teacher-centered methods speak for possibility of improving these students knowledge and preparedness and implies on the necessity to incorporate the related course in midwifery education.
Neda Babaee, Arash Poorsattar Bejeh Mir, Hamed Serajpoor,
Volume 26, Issue 4 (1-2014)
Abstract
Background and Aims: Occurrence of medical emergencies in dental offices is not uncommon. The most important and the first step in controlling the medical emergencies is the ability to provide basic life support which needs knowledge, experience and equipments. The aim of this study was to investigate the knowledge of dentists relating to the management of medical emergencies in dental office and their willingness towards holding related educational workshops.
Materials and Methods: This analytic cross-sectional research was accomplished in Babol among 132 general and specialist dentists in 2010. A validated questionnaire (Knowledge and attitudes of reliability: Cronbach's α value 79% and 84% respectively) consisting of 17 questions about knowledge (score of 14-17: excellent, 11-14: good, 8-11 moderate and less than 8: poor), three questions about attitude and demographic characteristics was distributed. Data were analyzed using t-test, X2 and Pearson correlation statistics using SPSS.
Results: 119 dentists (91.9%) filled out the questionnaire. The average age was 38.6 ( ± 7.5) years with 84 (70.6%) male and 35 (29.4%) female individuals. The average score of knowledge was 9.31 ( ± 2.31) out of 17 points which was negatively correlated to the graduation year (r=-0.43) and age of dentists (r=-0.3). 94% were agreed with workshops and 75% were agreed with equipment of office and emergency kit and 84.9% were not satisfied with the academic education in that field.
Conclusion: Knowledge of dentists in Babol was not sufficient in the field of medical emergencies which needs intervention for improving and updating by means of holding workshops and continuing education program.
Sayed Mohamad Razavi, Behzad Zolfaghari, Bahareh Tahani, Mostafa Emami Doost, Mehrdad Forohande,
Volume 27, Issue 1 (4-2014)
Abstract
Background and Aims : Dentists have usually a critical role in diagnosing oral cancer lesions in their early stages. In this study we aimed to assess the senior dental student’ and dentists’ knowledge, attitude and behaviors regarding oral cancer in Isfahan.
Materials and Methods: A valid and reliable self-administered questionnaire was designed to assess the current practice, knowledge and attitude of general dentists working in Isfahan-Iran and senior dental students regarding oral cancer lesions. The questionnaire was consisted of questions to assess the knowledge and attitude regarding diagnosis, risk factors and prognosis of oropharyngeal cancerous lesions. The frequencies of answers to questions in sections of practice and attitude (just for dentists) and sum score of questions in knowledge section were calculated and compared using statistical analysis regarding age, sex, duration of experience and practice setting ) p ublic/private) of participants. Data were analyzed using ANOVA, chi-square, linear regression and logistic regression.
Results: 139 questionnaires from dentists and 57 questionnaires from students were returned. The mean score of dentists’ knowledge was 5.41 out of 13 (CI95%=5.03-7.79 ). Significant differences were observed among dentists regarding their experience (P=0.001). Only one fifth of the dentists in our survey reported to perform oral cancer examination for all of their patients in age of 40 and above and just about 34% of dentists gained acceptable level of knowledge. Among senior dental students, the status of knowledge was better as about 58% of them gained the level of acceptance (P=0.01).
Conclusion: Although dentists were willing to follow the diagnostic protocol for oral cancer, they were mostly unsatisfied with the level of their knowledge. Therefore, this study highlights the need for educational planning and training activities in general dentists with regard to the risk factors and early detection of oral cancers.
Mohamadreza Khami, Arezo Ebne Ahmadi, Mina Ahmadian, Samaneh Razeghi, Reza Yazdani,
Volume 27, Issue 3 (9-2014)
Abstract
Background and Aims: Tobacco kills 5 million people worldwide annually, according to the Health Ministry reaches this number is about 70,000 people a year in Iran. Dental professionals are in a unique position to promote smoking cessation due to the opportunity for regular interaction with their patients. The aim of this study was to investigate knowledge, attitudes, and skills of dental students at Tehran and Shahid Beheshti dental schools towards tobacco cessation counseling in dental office.
Materials and Methods: In this cross-sectional study, the target group was dental students at Tehran and Shahid Beheshti dental schools, and the sampling method was census. A questionnaire on the knowledge, attitudes, and skills towards tobacco cessation counseling in dental practice was administered to the students (n=93). Data were analyzed using T-test.
Results: The response rate was 100% (93 students participate in this program and all of them filled the questionnaire). The average score of knowledge at Tehran and Shahid Beheshti dental schools was 17.5 and 18.4, respectively (P=0.09), the average score of attitudes was 33.5 and 33.1, respectively (P=0.80). There were no significant differences between the two dental schools in these parts. The average score of skill was 11.9 and 16.6, respectively. The differences between the students of two dental schools in skill were significant (P=0.002).
Conclusion: Although the attitude of dental students at Tehran and Shahid Beheshti schools towards tobacco cessation counseling seemed to be fair, some deficiencies existed in their knowledge and skill. Dental education programs should be implemented properly in this field.
, , , , ,
Volume 27, Issue 4 (1-2015)
Abstract
Background and Aims: Oral health is an important issue in public health with a great impact on individuals’ general health status. A good access to oral healthcare services and a good knowledge of it play a key role in the oral disease prevention. A better health attitude and practice require a better knowledge. The aims of this study was to evaluate the oral health knowledge among the International students branch (Kish) of Shiraz University of Medical Sciences in 2011-12.
Materials and Methods: 159 pre-clinical students in medicine (54 students), dentistry (69 students) and pharmacy (36 students) participated in this research. A standard questionnaire was used as the main tool of research to evaluate the attitude and knowledge of students about the oral health. Data were analyzed using Chi-square test.
Results: According to the results, dental students had the best level of knowledge and pharmacy students had a better knowledge level compared to the medical students. The results also showed a significant relationship between students’ oral health knowledge and their field and duration of study and the place of their secondary school (P<0.05), while no significant relationship was observed between their oral health knowledge and their gender or their parents’ educational level (P>0.05).
Conclusion: The results showed that the students at the International Branch of Shiraz University of Medical Sciences had a relatively good knowledge of oral health. Students’ knowledge level can be improved by providing students with educational materials, organized workshops and seminars.
Sayed Mohsen Hosseini, Fateme Bagheri, Faranak Farahmand, Asiye Heydari, Elahe Khorasani,
Volume 29, Issue 4 (1-2017)
Abstract
Background and Aims: Nowadays, oral cancer is considered one of the most important diseases related to oral health. The objective of the present study was to determine the dental students’ knowledge in Isfahan about oral cancer and the comparison of the level of students' knowledge in different years of education.
Materials and Methods: The present study was a cross-sectional-analytical one conducted in 2013. The population of study included the dental students of private and state University of Isfahan which 255 students were randomly selected. The data were collected using questionnaire and were then analyzed using SPSS software program and Kruskal-Wallis and Mann-Whitney.
Results: From private and public dental schools in Isfahan, 56% and 44% of dental students were involved. Regarding performing routine clinical oral examination, 81% of the participants answered positively, which showed no significant difference among the years of education of the participants (P=0.116). Regarding the examination of patients with oral lesions, 46% of them answered positively, which the difference between the years of education was highly significant (P≤0.001).
Conclusion: The findings of the research indicated that the level of knowledge of dental students of Isfahan city regarding the detection of oral lesions was not sufficient. Although, the students did not perform common examinations for exploring oral cancer, they did not have sufficient knowledge regarding some of the risk factors and oral lesions related to cancer. Therefore, it is necessary that a comprehensive curriculum be developed in this regard for their education.
Nasim Seyfi, Mahsa Valizadeh,
Volume 29, Issue 4 (1-2017)
Abstract
Background and Aims: Traumatic dental injuries (TDIs) are of the most common dental problems in children and adolescents, which usually occur in the anterior segment and have a significant role in patient’s physical and psychological health. Immediate intervention for damaged teeth can elevate the success rate of treatment in TDI. Thus, general dentists’ knowledge and their effective intervention in TDI are important factors in prognosis of traumatized teeth. The objective of this study was to assess the general dentists’ knowledge and awareness regarding the diagnosis and management of traumatic dental injuries.
Materials and Methods: In this cross-sectional study, the questionnaire data were collected from 130 general dentists, including the demographic data and general dentists’ knowledge about TDIs. The data were analyzed using the Student t-test and Analysis of Variance (ANOVA), Spearman’s and Pearson’s correlation coefficient.
Results: The mean score of general dentists’ knowledge was 8.5 ± 1.5 (total score:10) and it was the same between both males and females (P=0.083). Dentists’ work place does not have any influence in their knowledge (P=0.133). Also, there was no statically significant relationship between the age, job experience and dentists’ knowledge (P=0.805). The relationship between the frequency of TDI managed cases and dentists’ knowledge was not significant (P=0.507).
Conclusion: Considering that the overall knowledge of general dentists regarding the management of TDI was sufficient, it could be a good opportunity in treating these injuries. As TDI is a developing science, it is important to motivate general dentists being up to date regarding this matter.
