Journal of Dental Medicine

The purpose of this survey was the determine of effectiveness of preventive precisures. 320 twelve years school student have chosen randomly. After determination of DMFT All of them divided to 4 groups. First group as control and the other groups were as oral hygiene education 6-fluoride therapy and sealant therapy group in a period of two years.Results of this study showed that fluoride therapy was more effective than the other procisures than oral hygiene instructions.

Background and Aim: Pit and fissure sealant therapy, is one of the most effective methods, in prevention of occlusal caries. Saliva contamination before curing the resin can increase the risk of failure in this method. The purpose of this study was to evaluate the effect of saliva contamination prior to curing on microleakage of pit and fissure sealants.

Materials and Methods: In this experimental in vitro study 21 sound human pre molars were selected and two standardized V-Shaped fissures were prepared on both buccal and lingual surfaces, then they were randomly divided into two equal groups. In the control group, the sealant was cured without any saliva contamination and in the case group, the sealed teeth were immersed in artificial saliva for ten seconds before curing. After thermocycling the samples were immersed in 2% fouchsin solution for 24 hours and then sectioned longitudinally in bucco - lingual direction. The specimens were then fixed and assessed under stereomicroscope to determine microleakage and dye penetration using paired student t. test. P<0.05 was considered as the level of significance.

Results: Analysis of data showed no significant differences in microleakage, between the two groups (p=0.178).

Conclusion: According to the results of this study saliva contamination of uncured sealant had no influence on microleakage.

Background and Aim: Since the clinical studies conducted to explore the effect of bonding agents on the success of fissure sealant are limited in number, the present study was conducted to compare the effects of two bonding agents on the success of fissure sealant of the saliva- contaminated teeth.

Materials and Methods: In this study, 63 teeth of 35 students aged 6-8 with healthy and newly-erupted upper jaw molar teeth, were selected and divided into two groups. In one group, single-bond and In the other, SE bond were used. As the teeth were newly erupted and the distopalatal area being in contact with the gingival sulcus and this fact that, this area was impossible to isolate, the distal sulcus of the contaminated teeth and the mesial area capable of adequate isolation were assumed isolated. For each group, after etching, the teeth on one side were treated with a sealant and the teeth on the other side were first bonded and then treated with the sealant. Hence, four groups were formed: bonded/isolated, bonded/contaminated, controlled/isolated and controlled/contaminated for any bonding agent. The results of the treatment were assessed in terms of the success and failure and then analyzed using Mc Nemar, and Chi-square tests and Cochran.

Results: The results of the study indicated that:1. Saliva contamination caused a significant increase in sealant failures(p<0.05).2. Use of the two bonding agents significantly increased the success of the sealant(p<0.05).3. Use of the two bonding agents significantly increased the success of the fissure sealant on the saliva-contaminated teeth, even more than when the teeth had been isolated and with only fissure sealant(p<0.05). 4. For the contaminated enamel, the results of SE bond were better than those of the single bond (p<0.05). However, in isolated condition the results of using single bond were better (p<0.05).

Conclusion: The results of the study supported the use of these two bonding agents in the treatment of fissure sealants under both isolated and contaminated conditions. Further, more SE bond seemed to be less sensitive to saliva contamination.

Background and Aims: Moisture contamination of etched enamel during application of sealant is the most frequently cited reason for sealant failure. In previous studies, some hydrophilic bonding agents have been shown to bond to etched enamel after salivary contamination. The purpose of this study was to evaluate the enamelsealant interface following the use of primer on the saliva contaminated and/or moist etched enamel.

Materials and Methods: 40 extracted human incisors were selected. The enamel surfaces were etched for 20 seconds with an acid gel and rinsed for 30 seconds and dried until chalky surface was observed. Teeth were randomly divided into four treatment groups (n=10). Sealant (Deguseal mineral, Degussa) was applied on (1) etched enamel surface as a standard control group, (2) in conjunction with using primer material on moist etched enamel, (3) in conjunction with using primer material on salivary contaminated etched enamel, and (4) on wet contaminated etched enamel surface as a negative control group. Then, the specimens were observed with scanning electron microscopy (SEM) at ×1400 magnification. To evaluate the enamel resin interface, the number of resin tags was counted. Data were analyzed using one-way ANOVA.

Results: The results showed that primer used on moist enamel under sealant had no significantly difference in number and shape of tags in comparison with standard group (P>0.05). Application of primer on saliva contaminated enamel surface under sealant significantly reduced the number of tags and changed the shape and pattern of tags (P<0.001). Following application of sealant on contaminated and etched enamel alone, no resin tags formed.

Conclusion: Application of primer relatively reduced sensitivity to saliva contamination but the pattern was changed and number of tags reduced. Therefore, primer application might be useful whenever the isolation is not possible. However, it should be emphasized that restrict isolation in sealant therapy is recommended.

Background and Aims: Fissure sealant therapy is a national program in elementary schools in Iran. Therefore, evaluation of the parents' knowledge and attitude is necessary to improve the program.
Materials and Methods: In this cross-sectional and descriptive-analytic study, Iranian students were chosen in a randomized cluster manner. The questionnaires were filled-out by students' parents to evaluate their general information, knowledge, and attitude. Moreover, students were examined for having any fissure-sealed teeth. Data were collected and analyzed by multiple logistic regression tests.
Results: 414 boy students and their parents were participated in this study. 57.6% of parents knew that fissure sealant prevents the caries and 44.5% believed that fissure sealant is important to prevent caries. However, only 8.9% of children had fissure sealant. Parents' knowledge was significantly related to the source of oral health information and oral health education. Regular dental visits and high level education was effective in increasing the knowledge about sealant therapy. There was a significant relation between parents' attitude toward fissure sealant and level of education, oral health education and numbers and times of dental visit (P<0.001). There were a significant relation between tooth sealing and parents' oral health information.
Conclusion: Regular dental visits and oral health education have positive role in parent's knowledge and attitude and practice. So parents must be encouraged to have regular dental visit and dentists must be emphasized to give them necessary education. School is the best place for giving proper information to parents.

Background and Aims: Teaching of clinical skills is one of the most important aspects in training medical students. The aim of this study was to compare the effectiveness of videotaped and live demonstrations for applying fissure sealant on permanent molar teeth at Zahedan University of Medical Sciences (2010-2011).

Materials and Methods: Thirty 8th-semester dental students were randomly assigned in two groups (n = 15). In group 1, fissure sealant placement was taught using live demonstration while, in group 2, education was performed by videotaped demonstration. Then, each student applied fissure sealant on the patient's permanent molar tooth. The procedure of fissure sealant placement was assessed and scored by a pedodontist. The students were subsequently asked to rate how helpful the videotape or live demonstration had been. The data were analyzed using T-test and Chi-square test.

Results: The mean students' scores for videotaped and live demonstration were 16.5 and 16.53, respectively. There was no significant difference between the teaching methods according to students' scores (P>0.05). 33% of students rated videotaped demonstration as "good" for its helpfulness and 66% as "very good". However, live demonstration was rated as "good" and "very good" by 66% and 33% of students, respectively. There was no significant difference between two groups (P>0.05).

Conclusion: Both teaching methods were equally effective. Therefore, videotaped demonstration can be used in combination with live demonstration or as an alternative for it.

Background and Aims: A large number of investigations have revealed that physical and chemical alterations and weight loss could occur in composite materials exposed to acidic phosphate fluoride (APF) gel. The purpose of this study was to assess the microleakage of a fissure sealant and a flow composite exposed to acidulated phosphate fluoride (APF) gel.

Materials and Methods: In this in vitro study, 60 intact human extracted premolar teeth were used. After preparing the occlusal groove, the teeth were divided into two groups (n=30). Teeth were filled with either Helioseal fissure sealant (Vivadent, Germany) or Tetric flow composite (Vivadent, Germany). After that, each group was divided into two subgroups (n=15): 1.23% APF gel (Sultan, U.S.A) was applied in the case subgroups, while control subgroups were preserved in normal saline solution. All of teeth were covered with 2 layers of nail varnish except for the filling zone and 1mm around the border of filling. After submerging in 0.5% fushin solution, specimens were sectioned bucco-lingually. Then dye penetration through the filling and fissure sealant was assessed by means of a stereo-microscope. The depth of dye penetration was scored. The data were analyzed using One-way ANOVA and Levene test.

Results: The mean values of dye penetration were 1.26±1.09, 1.4±1.05, 1.2±1.37, and 1.4±1.35 for fissure sealant+gel, composite+gel, composite+normal saline, and normal saline groups, respectively. No significant difference was found in inter-groups (P=0.96).

Conclusion: Considering the result of the present research, APF gel had no significant effect on the microleakage of Tetric flow composite filling and Helioseal fissure sealant and thus, it can be applied for routine usage.

Background and Aims: When composite resin polymerizes, shrinkage stresses tend to produce gaps at the tooth/ restoration interfaces. Surface sealants may reduce or avoid problems related to the marginal interface. The aim of this study was to evaluate the effect of two different surface sealants (Fortify and Optiguard) on the microleakage of class V resin composite restorations.

Materials and Methods: Twenty three sound noncarious molars were collected. Totally, 45 Class V cavities with the occlusal margins in enamel and cervical margins in cementum were prepared in both buccal and lingual surfaces. The specimens were randomly assigned in three groups (15 cavities in each group) and then restored with a resin composite. After the finishing and polishing procedures, the restorations in each group were covered with a specific surface sealant, except for the control samples, which were not sealed. After placing restorations, the specimens were thermocycled and then immersed in a 50% silver nitrate solution (tracer agent) for four hours, sectioned longitudinally and analyzed for leakage using a stereomicroscope in a blind manner. The marginal microleakage was evaluated at the occlusal and cervical interfaces and compared among the three groups using the Kruskall-Wallis and the Mann-Whitney U tests.

Results: Microleakage was found in all groups at both occlusal and cervical margins. Significantly greater leakage was observed at the cervical margins compared to the enamel margins of the material groups (P=0.005). There was no statistically significant difference among the groups at occlusal margins (P=0.66). In the cervical region, Fortify showed improved results and statistically presented the lowest degree of microleakage (P=0.003).

Conclusion: The used sealant materials presented different rates of effectiveness and Fortify decreased marginal microleakage significantly.

  Background and Aims: Since recurrent caries are one of the major causes of failure in resin restorations, the production of antibacterial resin composites was always under investigation. The aim of this study was to evaluate the efficacy of fissure sealants containing nanosilver particles against the Streptococcus mutans.

  Materials and Methods: In this experimental study, the antibacterial properties of two sealants (with fluoride (Clinpro 3M) and without fluoride (Concise 3M) was investigated with 0, 0.01, 0.02, 0.03, 0.04, 0.05% w/w after adding nano-silver using direct contact test. Sealants formed on the walls of 500ml micro tube and after curing, they left in contact with bacterial suspension. In periods of 3, 24, 48h, a 10 µl volume of liquid medium was placed in blood agar culture and after 24 h incubation at 37ºC, the number of S.mutans colony was counted by colony counter. Data were analyzed using ANOVA and
T-test.

  Results: Results reported sealants with fluoride comparing to non fluoride ones had significant effect on inhibition of S.mutans growth (P<0.001). The direct contact test demonstrated that by increasing the amount of nano particles, the bacterial growth was significantly diminished (P<0.001).

  Conclusion: While sealants with fluoride demonstrated antibacterial effect, sealants with incorporation of higher weight percentage of nanosilver particles, had stronger and more significant antibacterial effect in direct contact test.