Vahid Gharibi, Abolfazl Mohammadbeigi, Mahdi Asadi- Ghalhari, Hamidreza Heidari,
Volume 10, Issue 1 (3-2020)
Abstract
Introduction: This study was designed with the main purpose of examining the compatibility of the two indicators of wet bulb globe temperature (WBGT) and predicted thermal strain (PHS) in assessing the environmental conditions and the heat load imposed on the subjects.
Method: In this cross-sectional study, 163 bakers were included in the study. Thermal stress was determined using the WBGT and PHS. At the same time, physiological responses of subjects were recorded, including tympanic temperature, heart rate and mean skin temperature. Finally, the predicted heat strain was evaluated and compared with actual values.
Results: Based on the results, the WBGT index is accompanied with an underestimation and PHS with an overestimation, compared to the tympanic temperature. In addition, the WBGT index with the core temperature and the predicted rectal temperature component of the PHS index are the most consistent (kappa value of 0.614 and 0.66, respectively). While the Kappa value is between the amount of water lost and the WBGT index, it indicates a mismatch (Kappa = 0.339).
Conclusion: The prediction of heat strains only based on the PHS index cannot reflect the actual heat load on individuals in thermal environments such as bakeries and it is associated with an overestimation. On the other words, this indicator is more suitable for indoor thermal environments, with minimal variation in individual and environmental factors affecting thermal stress
Zahra Hashemi, Mohammad Javad Sheikhmozafari, Azma Putra, Marzie Sadeghian, Nasrin Asadi, Saeid Ahmadi, Masoumeh Alidostie,
Volume 14, Issue 3 (10-2024)
Abstract
Introduction: Microperforated panels (MPPs), often considered as potential replacements for fiber absorbers, have a significant limitation in their absorption bandwidth, particularly around the natural frequency. This study aims to address this challenge by focusing on the optimization and modeling of sound absorption in a manufactured MPP.
Material and Methods: The study employed Response Surface Methodology (RSM) with a Central Composite Design (CCD) approach using Design Expert software to determine the average normal absorption coefficient within the frequency range of 125 to 2500 Hz. Numerical simulations using the Finite Element Method (FEM) were conducted to validate the RSM findings. An MPP absorber was then designed, manufactured, and evaluated for its normal absorption coefficient using an impedance tube. Additionally, a theoretical Equivalent Circuit Model (ECM) was utilized to predict the normal absorption coefficient for the manufactured MPP.
Results: The optimization process revealed that setting the hole diameter to 0.3 mm, the percentage of perforation to 2.5%, and the air cavity depth behind the panel to 25 mm resulted in maximum absorption within the specified frequency range. Under these optimized conditions, the average absorption coefficient closely aligned with the predictions generated by RSM across numerical, theoretical, and laboratory assessments, demonstrating a 13.8% improvement compared to non-optimized MPPs.
Conclusion: This study demonstrates the effectiveness of using RSM to optimize the parameters affecting MPP performance. The substantial correlation between the FEM numerical model, ECM theory model, and impedance tube results positions these models as both cost-effective and reliable alternatives to conventional laboratory methods. The consistency of these models with the experimental outcomes validates their potential for practical applications.
