Showing 5 results for Kalantari
Seyed Abolfazl Zakerian, Ehsan Garosi, Ziba Abdi, Ehsan Bakhshi, Mehrdad Kamrani, Reza Kalantari,
Volume 6, Issue 2 (6-2016)
Abstract
Introduction: Workplace design is one of the factors that can influence comfort, performance, productivity and the health status of employees. The effects of this factor on human’s productivity and performance are studied in the domain of ergonomics. The impact of workplace design on workers’ productivity and performance can be determined by investigation of the quality of the design. The main purpose of the present study was to investigate the influence of workplace design on productivity of the bank clerks.
Material and Method: Samples in this cross-sectional study were comprised of 150 employees of 22 different branches of a bank in Tehran city. Data collection tools included demographic questionnaire and a questionnaire related to the effects of workplace design on employees’ productivity, developed by Hameed and colleagues. Correlation and regression statistical tests were used in order to analyze data.
Result: According to the results, the mean (±SD) for age and job tenure of participants were 37.2(±6) and 13(±7) years, respectively. Of the surveyed demographic features, a significant relationship was observed between age and scores belonging to the temperature and furniture (P-value<0.05). In addition, there was a significant association between employees’ productivity and the noise (P-value=0.044) and spatial arrangement of environment (P-value=0.048).
Conclusion: Overall, appropriate and high quality design of work environment can improve productivity of bank clerks. In other words, employees’ productivity can be enhanced by comfortable and ergonomic design of working environment and also by considering their needs.
Ehsan Garosi, Adel Mazloumi, Reza Kalantari, Mostafa Hosseini,
Volume 7, Issue 4 (12-2017)
Abstract
Introduction: Nursing is one of professions that employees are at risk of fatigue and work related musculoskeletal disorders, because of high physical workload and high job stress. Connecting serum set to serum solution is one of the repetitive tasks for nurses in their working times and it may cause pain and discomfort in their hand. The aim of this study was to design and ergonomic evaluation of a tool for connecting serum set to serum solution.
Material and Method: This experimental- interventional study conducted on 12 nurses (6 men and 6 women) in 3 phases. First phase was assessment of manual connecting of serum set to the bag by nurses, second phase was design and manufacturing of serum set connector and third was ergonomic assessment of the manufactured tool. In first and third phases, amount of perceived exertion by nurses was assessed using the Burg scale (CR10), and electromyography assessment for hand muscles activity was conducted during connecting serum set. Data of first and third phases compared with statistical tests.
Result: Mean score of perceived effort during manual connection of serum set was 5±1/2 (of 10) and while mechanical connection with designed tool was 2.3±0/49. There was significant difference between activity in 5 muscles (Flexor Digit Comonis, Flexor Carpi Radial, Biceps, Triceps and Deltoid) in manually and mechanically connection mode (P-value<0.05).
Conclusion: Use of serum set connector reduced the perceived effort and activity of hand and wrist muscles. This device can be used as an ergonomic tool for nurses to easing the inserting the serum set to serum solution
Meghdad Kazemi, Saba Kalantari, Alireza Abbasi, Abbas Rahimi Foroushani, Hossein Mowlavi, Amir Hossein Montazemi, Farideh Golbabaei,
Volume 13, Issue 1 (3-2023)
Abstract
Introduction: In recent years, the manufacture of air purification media, especially nanofiber filters using polymeric materials and the electrospinning method, has received much attention in air pollution control. The production of high-performance media and low-pressure drops is an important issue in air filtration. This study aimed to investigate the feasibility of fabricating electrospinning polyethylene terephthalate (PET) media to abduct submicron and micron particles from the air stream.
Material and Methods: To determine the optimal device conditions in the manufacture of PET media, different weight percentages of a PET polymer solution in a mixture of trifluoroacetic acid and dichloromethane solvents (70:30) were first prepared in a pilot study, and various parameters of the electrospinning device were examined and analyzed along with performing the electrospinning process. The surface and morphological characteristics of the media were evaluated using SEM. The pressure drop and efficiency of particle trapping were assessed using a mask and media pressure by a pressure drop test device.
Results: The optimal electrospinning conditions of the PET polymer solution were obtained at a concentration of 20%. The average diameter of nanofibers PET was 163 ± 600 nm with a pressure drop of 26.33 ± 5.5 pa, and average efficiencies of 97.42 ± 1.67% and 99.85 ± 0.21 were obtained for submicron and micron particles, respectively, with a quality factor (QF) value of 0.1740.
Conclusion: The produced media can abduct and remove particles from the air stream for submicron and micron particles in ranges of 96-99% and 99-100%, respectively, with an average pressure drop of 26.33±5.5 pa.
Samaneh Khodaverdloo, Mohammad Reza Pourmand, Ensieh Masoorian, Roohollah Ghasemi, Saba Kalantari, Farideh Gholbabaie,
Volume 13, Issue 3 (9-2023)
Abstract
Introduction: Toluene is significant pollutants in the air. Long-term exposure to toluene can lead to adverse effects. Biofiltration is one of the air pollutant control methods. In this study, Pseudomonas putida was selected as a microorganism capable of hydrocarbon degradation and its ability to biodegrade toluene in a suspension growth reactor was also investigated.
Material and Methods: Experiments were conducted in two days and in five hours. Each method consisted of three sample reactors (A, B, C) and one control reactor (D). In the first method, the amount of bacteria in the sample reactors is 0.5, 1 and 2 McFarland and the amount of toluene injection into the reactors is the same (0.5 microliters) and in the second method, the amount of toluene injection into the sample reactors is 0.5, 1 and 1.5 microliter and 1.5 microliter in the control reactor and the amount of bacteria in them was the same (1 McFarland).Toluene gas samples and carbon dioxide were periodically analyzed.
Results: In the first method of toluene decomposition, there was a significant difference between the three reactors (p-value = 0.002). The results of the second method were also significantly different between the three reactors (p-value<0.001). The decomposition of toluene in two methods also had a significant difference (p-value = 0.232). The amount of CO2 production was significantly different in the second method (p-value=0.003) and the first method (p-value<0.001), but no significant difference was observed in the comparison of the two methods (p-value=0.15).
Conclusion: Increasing bacterial in suspension growth reactor resulted in increased toluene biodegradation in shorter time while increasing toluene in suspension growth reactor may not have an additive effect on the biodegradation process.
Jamal Biganeh, Vanoushe Kalantari, Soqrat Omari Shekaftik, Mohammad Javad Sheikhmozafari, Seyedeh Solmaz Talebi, Mohammad Hossein Ebrahimi,
Volume 14, Issue 2 (6-2024)
Abstract
Introduction: Driving has various harmful factors due to its nature, which affect drivers’ health directly and indirectly. Therefore, it is necessary to know the situation and prevalence of these factors in drivers to implement preventive measures.
Material and Methods: This cross-sectional study is a part of a cohort study conducted (2016 to 2018) among the professional drivers of Shahroud, Iran. Data related to background information, blood pressure, height, weight, waist circumference, body mass index, blood factors, hearing loss (dB), respiratory performance indicators, sleep disorders, and accidents were collected from the participants with standard tools and methods.
Results: This study examined 1461 male professional drivers with an average age of 37.30±6.96 years. A total of 426 participants had metabolic syndrome. 797 and 942 people had different degrees of hearing loss, respectively, in the right and left ear. About 129 people had obstructive sleep apnea, and 1330 people had insomnia. Investigations showed that 351 drivers had at least one accident.
Conclusion: This study showed the prevalence of health risk factors in professional drivers at the examined time point. Considering the vital role of drivers in transportation and the country’s economy, it seems necessary to pay more attention to the health of this occupational group. Regular health screening, healthy lifestyle training, improvement of working conditions, and stress management are some interventions that can effectively improve drivers’ health.
