Showing 5 results for Mehrifar
Hamideh Pirami, Zahra Zamanian, Faezeh Abbasi Balouchkhaneh, Younes Mehrifar, Fatemeh Keshizadeh,
Volume 9, Issue 2 (6-2019)
Abstract
Introduction: Carpal tunnel syndrome is followed by pushing Median nerve in the carpal tunnel of the wrist. Occupational factors such as repetitive movements of the hands and fingers and frequent wrist disturbances affect the development of this syndrome. Quality of life is a multidimensional concept including physical and mental performance. The aim of this study was to determine the prevalence of CTS and its impact on the quality of life of typists in Tehran.
Material and Methods: This analytic descriptive cross sectional study was conducted in 1396 on 363 typists from 50 typing institutes in Tehran. Data were collected Demographic-Job Profile Questionnaire, Boston (BQ), quality of life (SF36) and Visual Analog Scale (VAS). Data were analyzed using SPSS-22 software and methods such as ANOVA and Pearson correlation tests.
Results: Among 363 participants, 215 of them were female (59.23%) and 148 were male (40.77%). The mean age was 37 ± 12.58 years. Among the typists, 51 (14.55%) had one-sided hand conflict, and 312 (85.95%) were two-sided hand conflicts. Results indicated that the prevalence of CTS symptoms among women was higher than that of men The value of Pearson correlation coefficient (range: 0.0613-0.783) showed that there was a moderate to strong correlation between the severity of symptoms scale (SSS), functional status scale (FSS) and visual analog scale (VAS) in the population under study (p< 0.05). There was also a strong and significant correlation between SSS and FSS among typists. In this study, CTS symptoms have a significant negative effect on the quality of life of the typists, but the psychological dimension quality of life is not to be affected by these symptoms.
Conclusion: Regarding the existence of CTS symptoms among typists who work most of a day with computers, there is also a statistically significant relationship between the incidence of CTS symptoms and the quality of life in this occupational group. Therefore, it is recommended that more attention should be paid to these individuals, appreciate tools be correctly designed, and further study be done.
Younes Mehrifar, Zohreh Mohebian, Hamideh Bidel,
Volume 10, Issue 2 (5-2020)
Abstract
Introduction: Risk identification and investigation is an appropriate and practical approach for the occupational health professionals. This paper aims to determine exposure to the gases and metal fumes and to perform risk analysis in three common types of welding activities in a shipbuilding industry.
Material and method: This analytical cross-sectional study was conducted in a shipbuilding industry and three types of welding were considered including SMAW, MIG and MAG welding. Sampling of Mn and Cr fumes was carried out using NIOSH 7300 standard method, and NIOSH 6014 method NO2 sampling, and also direct reading devices for CO and O3 gases. Moreover, SQCRA risk assessment method was adopted to specify the level of exposure risk.
Results: The results of risk analysis showed that among gas pollutants, O3 and NO2 in all welding processes had a very high-risk level, while among the metal pollutants; Mn metal showed a high and very high risk level in MIG and SMAW welding.
Conclusion: According to the both sampling results and risk analysis, MIG process welders are more dangerous position than other types of welding.
Younes Mehrifar, Soleiman Ramezanifar, Sona Beyrami, Sara Talebolhagh, Ehsan Ramezanifar, Pardis Amiri, Mostafa Pouyakian,
Volume 12, Issue 4 (12-2022)
Abstract
Introduction: Due to occupational accidents, many costs are annually lost from the countries’ Gross Domestic Product (GDP). Estimating these costs can be essential for optimal investments and establishing appropriate policies in many countries, such as Iran. The present study aimed to review the studies conducted on the safety economics and the costs of accidents in Iran from 2000 to 2021.
Material and Methods: The reliable databases “Web of Science”, “Embase”, “IranDoc”, “SID”, “Magiran”, “Google Scholar”, “PubMed” and “Scopus” were used to conduct this research. Articles in these databases were searched and extracted by searching for keywords such as “accident”, “cost of accidents”, “occupational accidents” and “Iran” in Persian and English from 2000 to 2021.
Results: Among the 66 identified articles, 19 were selected as final articles, of which 11 studies were carried out in the transportation industry and eight in other industries. Among these studies, nine studies only examined and stated the total costs, and six studies separately examined and stated the direct, indirect, and total costs. Four other studies also investigated and expressed the costs caused by accidents in other ways. Most notably, in three studies, the number of direct costs is higher than indirect costs. Similarly, only six studies estimated the damage to the GDP, ranging from 0.03% to 6.46% of the GDP.
Conclusion: The results of the review of studies showed that occupational accidents cause the loss of a significant part of Iran’s GDP. It is recommended to carry out further studies on the relationship between investment in the safety sector and reducing the costs of accidents concerning the grouping of jobs, mainly in the process, service, and production industries, to prevent wasting such heavy costs.
Younes Mehrifar, Majid Abasi, Kazem Samimi, Saber Moradi Hanifi, Mostafa Pouyakian,
Volume 13, Issue 2 (6-2023)
Abstract
Introduction: Many general indicators have been proposed to assess an organization’s safety performance. However, due to their holistic nature, these indicators may not always reflect safety-specific aspects of an organization’s performance. In other words, the nature of an organization’s activities necessitates the use of specific criteria to better reflect safety performance. This study aimed to identify and measure key safety performance indicators using the Delphi method in Alborz Province Electric Power Distribution Company.
Material and Methods: This descriptive, survey-based study utilized the Delphi method to collect the opinions of 11 safety experts in the electric power distribution industry. Opinions were gathered in four phases, and key indicators were determined in the last phase of the study. These indicators were subsequently used to evaluate the safety performance of Alborz Electric Power Distribution Company for three months.
Results: This study identified and documented 34 safety activities. The expert group proposed 20 indicators in the first phase of the Delphi method. In the second and third phases, four and one indicators were eliminated, respectively, because they did not receive the required score. The content validity ratio (CVR) and content validity index (CVI) were calculated for the remaining 15 indices in the fourth phase. The results revealed that the mean quarterly performance scores of Alborz Province electric power distribution districts and departments in 2016, including Nazarabad, Savojbolagh, Mehrshahr, Fardis, West, East, Taleghan, and Eshtehard, were 78.9, 54.7, 78.8, 75.9, 75.7, 80.8, 61, and 83.5 out of 100 points, respectively.
Conclusion: The Delphi method is useful for identifying key safety performance indicators. The indicators discovered using this technique are active indicators (pre-accident) that are crucial in determining Alborz Electric Power Distribution Company’s safety performance. These indicators are suggested for use in evaluating the safety performance of other electric power distribution companies.
Parvin Sepehr, Mousa Jabbari, Hassan Sadeghi Naeini, Ali Salehi Sahl Abadi, Mansour Ziaei, Vahid Ahmadi Moshiran, Maryam Ahmadian, Younes Mehrifar,
Volume 14, Issue 3 (10-2024)
Abstract
Introduction: The safety harness is a critical device for preventing falls from height, particularly in the construction industry. This study aimed to identify the factors contributing to the non-use of safety harnesses during work at height and to evaluate the comfort, satisfaction, and usability of these harnesses among construction workers in Tehran using a custom-designed tool.
Material and Methods: A semi-structured interview was conducted with construction workers to identify the factors influencing the non-use of safety harnesses. The collected data were analyzed using MAXQDA 10 software. Based on the results, which revealed dissatisfaction with the current safety harnesses, the levels of comfort, satisfaction, and usability were assessed using the Safety Harness Usability and Comfort Assessment Tool (SHUCAT) questionnaire.
Results: The reasons for not using safety harnesses were categorized into four main groups: management factors, worker attitudes, comfort, and harness design. These were further subdivided into 27 subgroups. The average satisfaction and comfort scores for safety harnesses were 26.8 ± 6.25, indicating that workers generally felt uncomfortable and dissatisfied with their harnesses. The average usability score was 38.70 ± 5.60, reflecting poor usability of the harnesses.
Conclusion: Improving the safety harness design could enhance workers’ comfort and satisfaction, increasing their willingness to use the equipment. Incorporating feedback from users and experts into the design process can help address the identified shortcomings and result in better product development.