Zahra Hashemi, Mohammadreza Monazzam Esmailpour, Nafiseh Nasirzadeh, Ehsan Farvaresh, Zahra Beigzadeh, Samaneh Salari,
Volume 12, Issue 4 (12-2022)
Abstract
Introduction: Natural materials are more efficient and attractive than synthetic materials. In this study, the sound absorption behavior by natural kenaf composite and Micro-Perforated Panel (MPP) at low and medium frequency region was investigated.
Material and Methods: Initially, the results of kenaf fibers with a thickness of 10 mm were validated by the Finite Element Method (FEM) based on COMSOL Multiphysics 5.3a. The studied combined panel is consisting kenaf fibers with micro-perforated plates and an air layer. This study examined the varying arrangement of the behind layers of the MPP, the different thickness of the layers, and the structural parameters of MPP. The structure with the best absorption coefficient was chosen for the following stage and was considered constant at each stage.
Results: The arrangement of composite layers indicated a strong direct effect on the sound absorption performance; as we discovered that kenaf fibers behind MPP led to better performance in frequencies below 2500 Hz. In addition to the chamber depth behind the MPP, the material and macroscopic properties of the layers, at the same depth, are also important determinants of the exact point of the resonant frequency. Furthermore, configurations in which air layer depth is more than the absorption layer, with the same diameter (hole) and depth (chamber), maximum resonant absorption peak is achieved.
Conclusion: Low-frequency sounds can be successfully dissipated by combining MP plates with kenaf fibers as reinforcing absorber in combined panel. In general, choosing the optimum structural parameters (Composite panel according to structure A with 0.5 mm hole diameter and 2% perforation percentage) allows a significant absorption at a specific frequency range. In this context, the use of numerical estimation to assess the sound absorption behavior can be meticulously substituted the difficult methods and laboratory costs.
Mahdi Mohammadiyan, Nafiseh Nasirzadeh, Akbar Ahmadi Asour, Sepideh Keyvani, Fatemeh Fasih-Ramandi, Farideh Golbabaei,
Volume 14, Issue 2 (6-2024)
Abstract
Introduction: In recent years, exposure to nanomaterials has been known as a challenge among occupational health experts. In this line, personal protective equipment has been considered as a solution to reduce the worker’s exposure. Since respiratory and skin tracts represent the most common workplace exposure routes, knowledge of the efficiency of respiratory and skin protection equipment is particularly important. So, the aim of this study is the assessment of the efficiency of respiratory and skin protection equipment toward controlling nanoparticles in the workplace with a scoping review approach.
Material and Methods: This study was conducted in 2022 with a scoping review approach. Arksey and O’Malley’s five-step framework was chosen as the research method. The search strategy was followed in the databases necessary to access the research data, including PubMed, Google Scholar, Science Direct, Web of Science, and Scopus. Also, EndNote X9® and Microsoft Excel software were used to collect and analyze studies, respectively.
Results: In the first step, 1014 articles were identified. Finally, 38 articles were included in the study to examine quantitative and qualitative information about the efficiency of respiratory and skin protective equipment. Twenty-five articles were related to breathing masks, and six studies were about protective gloves, and seven other articles were devoted to protective clothing. According to the studies of breathing masks, the mean total penetration of nanoparticles was estimated at 2.27%. Also, based on the studies of protective clothing, the maximum penetration of nanoparticles was 30nm for protective clothing made of polypropylene and polyethylene with different layers.
Conclusion: Although the efficiency of existing personal protective equipment showed a good result for controlling nanoparticles, the size of nanoparticles is one of the essential parameters in determining the efficiency of the equipment, which should be considered the workplaces. So, it is recommended that more studies be considered to improve their efficiency, and standard tests should be developed to evaluate them.
