Showing 2 results for Zandsalimi
Ali Jafari, Mohammad Reza Monazzam Esmaeelpour, Fardin Zandsalimi,
Volume 14, Issue 2 (6-2024)
Abstract
Introduction: A wood-wool cement panel (WWCP) is wood wool combined with Portland cement mortar. This environmentally friendly acoustic material can be used as a thermal insulator and fire-resistance material with desired mechanical properties. This study aimed to determine the mechanism by which WWCP absorbs sound and the effect of production and application parameters on absorption
Material and Methods: The samples were prepared from poplar wood wool and white Portland cement as a binder in two Cement Fiber Ratios (CFR), namely 2:0.7 and 2:0.95, with bulk densities of 400, 500, and 600 Kg/m3 and thicknesses of 2 and 4 cm. Three layers of backing: air, polyurethane foam, and glass wool were examined separately. Acoustic absorption coefficient was measured using an impedance tube based on ISO 10534-2.
Results: The highest increase in the average absorption coefficient due to the increase in thickness was observed for the sample with a density of 400 kg/m3 and CFR = 2: 0.95, equal to 0.3. Increasing the bulk density to 500 kg/m3 for most samples and in the high-frequency range led to rising absorption efficiency. The optimal backing effect was due to the placement of 4 cm of polyurethane foam behind the sample, which in both thicknesses led to an absorption peak with an absorption coefficient higher than 0.95 at frequencies between 400 and 500 Hz. Selected samples showed that painting WWCPs led to a limited drop in absorption coefficients at high frequencies, comparing the before and after painting results with oil-based paints.
Conclusion: Tuning the absorption frequencies of these absorbers can be achieved by altering factors such as the thickness or density. It has been demonstrated that the effects of thickness and bulk density on the sound absorption of WWCP are related to each other. Concerning the CFR values, increasing the density did not significantly affect absorption in the two frequency ranges.
Sajad Zare, Reza Esmaeili, Fardin Zandsalimi,
Volume 14, Issue 3 (10-2024)
Abstract
Introduction: Cognitive functions play a vital role in how tasks are performed; for this, temporary cognitive and mental dysfunctions could lead to grave consequences, especially when an accurate and prompt response is required. Attention and reaction time to noise are among the most effective exogenous factors on the brain processing mechanism. This study aimed to measure the sustained attention of workers in the steel industry exposed to different sound pressure levels.
Material and Methods: The study was conducted in 4 general stages, including 1- Selecting predictive orientation variables (age, work history, different sound pressure levels); 2- Conducting the Cognitive Performance Test (CPT); 3 Conducting N-BACK Cognitive Performance Test and 4- Modeling cognitive performance changes using model precision methods.
Results: Continuous Performance Test (CPT) results indicated that all three groups’ omission error, commission error, and response time were affected by shift time. All three components increased significantly as the shift ended, decreasing individuals’ cognitive function. Also, the higher noise impact in modeling CPT and N-Back tests indicated reduced workers’ concentration.
Conclusion: These study findings suggested that greater noise weight obtained in test modeling in three-time intervals, i.e., in the beginning, middle, and end of the shift, affected the continuous performance components of the CPT and working memory performance of the N-back test, including workers’ response time and reaction time, with workers’ rate of error increasing and their focus decreasing during the shift.
