Journal of Health and Safety at Work

---

Introduction: Numerous studies have been conducted on the development of modern insulators, including nano-insulators. However, a comprehensive study has yet to be performed to review and investigate the thermal properties of these insulators. Consequently, this study aimed to examine the effect of nanomaterials on thermal insulation function.
Material and Methods: In this review, articles were searched for in English databases (PubMed, Web of Science, and ScienceDirect), Persian databases (Magiran, SID), and Google Scholar. The keywords used in the search were Nano Material, Nano Insulation, Thermal Insulation, Thermal Insulator Stability, and Thermal Conductivity in both English and Persian.
Results: Of the 4068 studies identified through search databases, 15 were selected according to the entry criteria. Among the studies, the three types of silicone, composite, and aerogel insulation had the highest frequency (each 26.67%), and SiO2 nanoparticles were the most prevalent nanomaterial (26.67%). According to the studies, the type of nanomaterial used in insulation will improve its properties such as thermal resistance, mechanical strength, dielectric strength, tensile strength, elasticity, and hardness.
Conclusion: The results of this study showed that using nanotechnology could be an effective step in improving the properties of insulation materials, the most important of which is increased thermal resistance. Moreover, nanotechnology insulators can prevent thermal energy loss, reduce costs, and provide safety and comfort.

---

Introduction: Strategic management involves determining the organization’s direction, preparing a strategic vision and mission statement, and providing the basis for growth, profitability, and production. It also includes the inclusion of employee safety and health programs throughout the organization. The existence of a strategic plan for the scientific and practical strengthening of occupational health and safety is one of the country’s academic and industrial priorities. The purpose of this study is to present a strategic plan for developing the specialized field of occupational health and safety engineering in Iran.
Material and Methods: The current study is a collaborative action research study that was conducted in 2021. The strategic planning committee consisted of 20 professors, experts, and doctoral students. Over the course of 14 weeks, they held regular weekly meetings, collected information from inside and outside the organization, analyzed the organization’s internal and external environment, and identified its strengths, weaknesses, opportunities, and threats. Based on this analysis, the committee determined the organization’s mission, perspective, values, and general and specific goals for 2021-2024. They also identified the necessary measures to achieve these goals and developed an operational plan to improve the performance of the specialized field of occupational health and safety.
Results: Conducting this applied research led to the strategy of internal and external analysis of the specialized OHS field, determining the direction of the basic strategy, mission, perspective, values, and general goals. Finally, seven specific goals and 286 actions were determined to improve the performance of OHS. The SWOT analysis of OHS’s internal and external environment identified 27 strengths, seven weaknesses, 26 opportunities, and 12 threats. According to the results of the SWOT matrix, the strategic position of the OHS field is to implement preventive strategies and maintain existing conditions.
Conclusion: This plan aligns with the 4-year OHS plan. In developing the program, attention has been paid to the documents and policies of upstream organizations. The strategic position of occupational health and safety engineering is a prudent strategy. In this situation, strategies for maintaining existing conditions can be applied. Therefore, it is suggested to reduce the weaknesses of OHS as much as possible and increase its strategic capabilities by focusing on prudent strategies. From the second year of implementing the strategic plan, the OHS field can gradually focus on developing activities.

---

Introduction: Studies have demonstrated that teaching carries a substantial burden of health risks. Prevalent health issues among teachers include asthma, respiratory diseases, musculoskeletal problems, and mental disorders. These problems can be attributed to the specific attributes of their work environment. Consequently, this study aims to investigate the correlation between air quality within educational establishments and the overall health of teachers.
Material and Methods: This systematic review aims to examine the impact of temperature, humidity, and ventilation rates within educational environments on teachers’ health status and thermal comfort. Relevant studies were searched for using the PubMed and Web of Science databases, employing keywords such as teacher, temperature, humidity, ventilation, school, classroom, health symptoms, and thermal comfort (2000-2022). The inclusion criterion was that articles examined teachers’ health and comfort with temperature, relative humidity, and ventilation of the educational place.
Results: Out of the 103 articles found in the initial search, 13 articles were finally reviewed. Six studies investigated the voice abnormalities of teachers due to various factors (including temperature, relative humidity, and the ventilation rate of the educational place) and found that these abnormalities were affected by these factors. Two studies explored the relationship between the prevalence and exacerbation of respiratory symptoms and quality parameters of the indoor environment of educational places. Additionally, five studies investigated the relationship of air quality parameters of educational places with common non-specific symptoms among teachers.
Conclusion: Teachers frequently experience symptoms such as voice disorders, respiratory difficulties, allergies, and other nonspecific ailments, which may be associated with the quality parameters of the indoor environment in educational settings. These parameters include temperature, humidity, and ventilation rate. Consequently, controlling and regulating these parameters within the recommended values can help prevent the onset or exacerbation of these symptoms.

 

---

Introduction: Despite the legal prohibition of asbestos fiber usage in the country, numerous studies have documented its presence in the air of various cities, including Tehran. This urban air pollution stems from the extensive use of asbestos in construction materials such as pipes, insulators in cooling and heating systems, and friction devices like brake pads and clutch plates, among other consumer products. Prolonged exposure to these fibers can have severe health consequences for residents, leading to respiratory issues, pulmonary fibrosis, and cancers such as mesothelioma. Consequently, we conducted a descriptive cross-sectional study to examine both the extent and nature of asbestos fiber distribution in Tehran’s air.
Material and Methods: This study measured the concentration of asbestos fibers in Tehran’s air over a 12-month period. Monthly samplings were conducted at eleven Tehran Air Quality Control Company-operated stations. The sample collection, preparation, and analysis adhered to the NIOSH 7400 method. Microscopic examination results were then translated into asbestos fiber concentrations using the appropriate formulas.
Results: Analysis of samples taken across four seasons revealed that spring recorded the highest average asbestos fiber concentration at 0.00134 f/ml, while the lowest concentration was observed in summer at 0.117 f/ml.
Conclusion: Given the widespread ban on asbestos use in many countries, including Iran, its presence in urban air is unexpected. Regrettably, flawed policy decisions made during the import ban announcement and the extended timeframe set for the ban’s initiation allowed companies to import and stockpile asbestos indiscriminately for future use.

---

Introduction: To ensure employee safety and health, it is crucial to choose and use personal protective equipment correctly. An investigation of the respiratory and hearing protection equipment used in the industries of Tehran was conducted in the present study.
Material and Methods: This study was a descriptive-analytical study conducted in 2023 on 400 occupational health and safety experts in Tehran province. A researcher-made checklist and questionnaire (physical and online versions) were used to determine the criteria that are considered when selecting protective equipment. Statistical analysis and graphing were performed using SPSS-v21 and Excel-2016.
Results: Participants had an average age of 38.66 and an average work experience of 11.78 years. The participants reported 48.3% and 47.7% disapproval of the quality and 42.5% and 39.5% disapproval respectively of the quantity of respiratory and hearing protection equipment available in their industrial units. In addition, 56.3% of them admitted that they have no responsibility for providing or approving the equipment in their workplace. Overall, 27 and 29 criteria were mentioned by study participants pertaining to respiratory and hearing protection equipment, respectively. In the identified criteria, the frequency distribution ranged from 0.3% to 38%.
Conclusion: A high rate of expert dissatisfaction with protective equipment and a low frequency of most of the criteria mentioned indicates that industries aren’t paying much attention to the issue of choosing the right respiratory and hearing protection equipment. To improve the situation, more investigation is needed and practical and operational solutions will be provided. This study highlights the importance of proper selection and use of personal protective equipment in ensuring the safety and health of employees.

---

Introduction: The COVID-19 pandemic has been a significant global health challenge. Primary care services, such as screening health centers, were crucial in identifying infected individuals. However, these centers were often crowded and posed a high risk to staff and non-COVID-19 patients. This study aims to assess the risk of airborne transmission of SARS-CoV-2 in such settings through simulation.
Material and Methods: In this study, waiting and sampling rooms of a COVID-19 healthcare center were simulated using different scenarios. Then, the Quanta emission rate was estimated using the viral load in the sputum of infected individuals. Finally, the airborne transmission risk of SARS-CoV-2 was determined using the Wells-Riley method for scenarios of wearing and without masks.
Results: The study showed that the Quanta emission rate in an unmodulated speaking activity was higher than other expiratory activities in both units (p <0.001). Also, the total amount of Quanta was slightly higher in the sampling room than in the waiting room, which was not statistically significant. On the other hand, the calculation of transmission risk showed that the probability of airborne virus transmission in the sampling room was higher (about 2 to 8%). In addition, wearing masks reduced the possibility of airborne transmission of the virus significantly (77 to 81%).
Conclusion: This study shows that the level of risk in the sampling and waiting rooms is moderate. Masks also significantly reduce the possibility of airborne transmission of SARS-CoV-2. Taking appropriate health and safety measures such as avoiding crowds, wearing masks, whispering, and monitoring social distancing can reduce the plausibility of airborne transmission of the SARS-CoV-2 virus.
 

---

Introduction: VOCs are harmful air pollutants that must be detected, monitored and eliminated. Adsorber tubes are standard tools for this task, specifically activated carbon tubes with high adsorption and selectivity. This research aims to compare the structural and functional characteristics of domestically produced activated carbon tubes with the conventional commercial ones for sampling toluene, a volatile organic compound.
Material and Methods: The characteristics of each adsorbent, such as structure, morphology, porosity, and element composition, were examined by SEM photography, BET testing, and EDAX analysis. The central composite design (CCD) method was employed to investigate the adsorption properties of the adsorbents. The input concentration and readsorption time of the samples were the variables considered in this study. Additionally, a field phase of personal air sampling was performed to evaluate the effectiveness of adsorbent tubes.
Results: SEM and BET analyses indicated that the porous structure of domestic activated carbon was comparable to the model produced by SKC. EDAX analysis detected a minor impurity (1%) in the domestic activated carbon adsorbent. The adsorption performance was significantly influenced by the variations in readsorption time and pollutant input concentration. The accuracy and precision of the performance of the domestic adsorbent tube were obtained as 90.77% and 91.76%. The field phase results demonstrated that the amount of pollutant adsorbed in the SKC-activated charcoal adsorber did not differ significantly during 0 to 30 days. However, the domestic adsorber showed a significant difference in the same period. The overall performance of the two adsorbers did not exhibit a significant difference between 0 and 30 days.
Conclusion: Despite minor structural differences, the adsorption efficiency of toluene by domestic adsorbent tubes in sampling high concentrations is very similar to its commercial type. However, it is not recommended for use in low-concentration environments (10 ppm and less).

---

Introduction: The purpose of occupational health is to maintain and improve the health of employees and improve their physical, mental and social well-being through the prevention, control and elimination of occupational hazards. It is necessary to integrate educational, research and health service activities to prevent and control potential occupational health hazards in the community. This study aimed to develop a Joint Comprehensive Plan Of Action (JCPOA) for occupational health at Tehran University of Medical Sciences (TUMS).
Material and Methods: In this participatory action research, a strategic planning committee was established, whose members were professors of the occupational health department in the school of public health and managers of the occupational health department in the health deputy of TUMS. The strategic planning committee carried out a strategic evaluation of the internal and external environments of both occupational health deprtments of TUMS and identified the strengths, weaknesses, opportunities and threats. Then, the strategic direction of JCPOA including the vision, mission, values, goals and objectives was determined. Also, the strategies and actions to achieve the goals and objectives were identified. Finally, the action plan to achieve these objectives was developed.
Results: This applied research led to the strategic evaluation of the internal and external environments of the occupational health depratment of the School of Public Health and the occupational health depratment of the Health deputy of TUMS, determining the strategic direction, and finally, developing an action plan to achieve the goals and objectives.
Conclusion: The JCPOA for occupational health was developed using a collaborative and systemic approach. The proper implementation of this plan can lead to the improvement of occupational health indicators in the community. Cooperation between university and industry is necessary for the sustainable development of society.

---

Introduction: Protection of the respiratory system has been a vital, and for this purpose, various solutions have been proposed, including the use of masks. One of the most important parameters to measure the effectiveness of the mask against the penetration of microbial agents. The present study was conducted with the aim of evaluating the bacterial and particle filtration of medical masks.
Material and Methods: To assess bacterial performance, the national standard 6138, compliant with EN14683, and Type I medical masks were utilized. Staphylococcus aureus bacterial suspension was prepared and passed through the mask using a nebulizer and through an impactor with a flow rate of 28.3 l/min. Plates containing soy agar were placed in the impactor. Subsequently, all plates were incubated, and the bacterial filtration efficiency (BFE) of the masks was determined by counting the bacterial colonies that passed through the mask’s media as a percentage of the total bacteria. It is worth noting that the pressure drop and particle filtration efficiency were also determined for all masks
Results: Based on the results of the particle removal performance for the particle size of 3 µ, the masks were categorized into three groups with efficiency above 99%, above 95% and 90%. According to the standard, all masks had an acceptable pressure drop below 40 Pa. The acceptable bacterial filtration rate for type I masks should be above 95%. The results showed that type A and B masks have an acceptable bacterial filtration rate and there is a significant correlation between the types of masks examined in terms of bacterial and particle efficiency.
Conclusion: The results showed that different types of masks under investigation have significant differences in terms of particle capture efficiency and bacterial filtration performance. In addition, there is a significant correlation between bacterial and particle filtration efficiency.
 

---

Introduction: Improving health and the environment is one of the components of development, social welfare, and economic growth. Another influential factor in increasing health costs and reducing social welfare is work-related accidents and diseases, which impose high costs on individuals, industries, and the national economies of countries. Therefore, using multi-criteria decision-making methods, the present study provided a conceptual model to identify and rank work-related diseases’ environmental and health costs.
Material and Methods: The present study was conducted in 2023. A classification model for the economic evaluation of environmental and health costs of occupational diseases was developed to achieve the study’s aim. In the current research, the Delphi method was used to identify health and environmental criteria, and the Analytic Network Process (ANP) was used to weight the sub-criteria. Finally, the cost of health and the environment was estimated based on the available information. Naft Tehran Hospital (NSHT) was also selected as a case study site.
Results: The results showed that the drug and medical equipment cost factor, with a weight of 0.312 in the treatment sector, and the particular and infectious waste cost factor, with a weight of 0.085, were the most critical factors in the economic evaluation. Also, the parametric model results showed that 99.84% of the total costs are related to health costs, and 0.16% are related to environmental costs. In general, the results of this research showed that 61.3% of the costs of the health sector are related to the two sectors of medicine and medical equipment and the cost of service personnel, and 91.7% of the costs of the environmental sector are related to wastewater treatment and the cost of electricity consumption.
Conclusion: This study presented a semi-quantitative model to estimate health and environmental costs caused by occupational diseases. The results can create a novel scientific insight into implementing control measures using the optimal point of cost-benefit parameters. Implementing this integrated model can be a practical and effective step in allocating resources and prioritizing interventions.
 

---

Introduction: In recent years, exposure to nanomaterials has been known as a challenge among occupational health experts. In this line, personal protective equipment has been considered as a solution to reduce the worker’s exposure. Since respiratory and skin tracts represent the most common workplace exposure routes, knowledge of the efficiency of respiratory and skin protection equipment is particularly important. So, the aim of this study is the assessment of the efficiency of respiratory and skin protection equipment toward controlling nanoparticles in the workplace with a scoping review approach.
Material and Methods: This study was conducted in 2022 with a scoping review approach. Arksey and O’Malley’s five-step framework was chosen as the research method. The search strategy was followed in the databases necessary to access the research data, including PubMed, Google Scholar, Science Direct, Web of Science, and Scopus. Also, EndNote X9® and Microsoft Excel software were used to collect and analyze studies, respectively.
Results: In the first step, 1014 articles were identified. Finally, 38 articles were included in the study to examine quantitative and qualitative information about the efficiency of respiratory and skin protective equipment. Twenty-five articles were related to breathing masks, and six studies were about protective gloves, and seven other articles were devoted to protective clothing. According to the studies of breathing masks, the mean total penetration of nanoparticles was estimated at 2.27%. Also, based on the studies of protective clothing, the maximum penetration of nanoparticles was 30nm for protective clothing made of polypropylene and polyethylene with different layers.
Conclusion: Although the efficiency of existing personal protective equipment showed a good result for controlling nanoparticles, the size of nanoparticles is one of the essential parameters in determining the efficiency of the equipment, which should be considered the workplaces. So, it is recommended that more studies be considered to improve their efficiency, and standard tests should be developed to evaluate them.

---

Introduction: The use of antineoplastic drugs in cancer treatment, while essential, poses risks due to their non-selective action on both cancerous and healthy cells. Assessing and controlling environmental contamination with these drugs in workplaces is crucial. This study aimed to evaluate the efficacy of various commercial wipes in sampling the antineoplastic drug 5-fluorouracil from surfaces to develop standardized sampling methods.
Material and Methods: This study assessed the efficiency of commonly used commercial wipes (Whatman cellulose filter, cotton swab, Millipore™ filter, sterile gauze pad, and alcohol pad) for sampling 5-fluorouracil from different surfaces (stainless steel, vinyl, and ceramic). The sampling area was defined using disposable cardboard frames, and 1000 microliters of a 1 µg/mL 5-fluorouracil solution were applied to each surface. Sampling and extraction were conducted following NIOSH guidelines. The frame dimensions were 10 × 10 cm, limiting the sampling area to 100 square centimeters. Analysis was performed using high-performance liquid chromatography (HPLC), and results were analyzed using Prism GraphPad software, version 8.
Results: The sampling efficiency varied across wipes and surfaces, ranging from 11.2% to 86.2%. Alcohol pads showed the highest efficiency on stainless steel surfaces, while the Millipore™ filter had the lowest efficiency across all surfaces. Extraction efficiency ranged from 43.8% to 98.8%, with alcohol pads providing the highest recovery. Sample stability was maintained over 15 days.
Conclusion: Alcohol pads were most effective in collecting and extracting 5-fluorouracil, particularly from hard, smooth surfaces such as stainless steel and ceramic. These findings may improve sampling methods, thereby reducing occupational exposure to antineoplastic drugs. Further research on different wipes and extraction parameters could refine drug analysis techniques. 

---

Introduction: Workers who work in warm situations need clothes with better thermal regulation. Nowadays, improving the thermal regulation properties of cotton fabric by treating it with phase change materials (PCMs) has been considered. The type of fabric plays an important role in providing thermal comfort. Cotton fabric is the most popular raw material in the textile industry due to its distinctive features. Therefore, this systematic review aims to investigate the effects of PCM nanoencapsulation in commonly used cotton fabrics, including morphology, thermal properties, thermal stability, tensile strength, abrasion resistance, leakage, water absorption, washing ability, and breathability of the fabric, related challenges, and future research trends.
Material and Methods: This research was conducted with the papers obtained from the systematic search in Science Direct, Web of Sciences, Scopus, and PubMed databases. Keywords “nanoencapsulated phase change materials”, “nanoenhanced phase change materials”, “cotton”, “cotton fabric”, and “cotton textiles” were used.
Results: Of the 1251 studies identified through search databases, 13 were selected according to the entry criteria. The results revealed that in all the studies, PCM nanocapsules were successfully synthesized and inserted into the cotton fabric, improving the fabric’s thermal properties. Most studies used in situ polymerization and mini-emulsion polymerization for nanoencapsulation. The pad-dry-cure method was also widely used for applying nanocapsules to cotton fabric.
Conclusion: This systematic review showed that synthesized nanocapsules of phase change materials and applied them to cotton fabric can improve the thermoregulating properties of the fabric. It is suggested to expand the research to design thermoregulating clothes made from treated fabrics and investigate their cooling performance.

---

Introduction: Volatile organic compounds (VOCs) are hazardous toxic pollutants in the air, which are released from various industrial sources. Due to the adverse effects of xylene on health, the effective removal of VOCs from the air by nano sorbents is crucial. In this study, nanographene (NG) and nanographene oxide (NGO) were used as adsorbents to investigate the efficiency of xylene removal.
Material and Methods: In this study, in order to investigate the absorption efficiency of nanographene and nanographene oxide after the synthesis of nano absorbents in a dynamic system, xylene vapor was produced in a chamber in pure air and stored in a Tedlar sampling bag and then transferred to the adsorbent. Subsequently, the effect of various parameters such as xylene concentration, inlet air flow rate, and absorbent mass values at 32% humidity and 25°C temperature on the absorption rate and performance of the desired absorbents was investigated. Finally, the gas chromatographic flame ion detector (GC-FID) determined the concentration of xylene in air after the adsorption-desorption process.
Results: The average adsorption efficiencies for NG and NGO were found to be 96.8% and 17.5%, respectively. The characteristics of the NG and NGO adsorbents indicated that the particle size range was less than 100 nanometers.
Conclusion: The results demonstrated that the adsorption efficiency of NG for the removal of xylene from the air is higher than that of NGO. The GC-MS method validated the proposed approach in real air samples.

---

Introduction: Nanomaterials are widely applied across diverse scientific and industrial sectors; however, their emergence has introduced a new generation of occupational hazards for workers. Concurrent with discussions on the adverse effects of nanomaterials on human health, researchers have sought to develop methods for assessing occupational risks associated with these materials. Accordingly, this study aims to propose a general framework for the development of such methods.
Material and Methods: This is a critical analysis study designed to evaluate existing methods for assessing occupational risks related to nanomaterials and ultimately propose a modified framework for refining these methods. By examining current approaches and identifying their strengths and weaknesses, the authors have proposed an improved framework for occupational risk assessment of nanomaterials.
Results: The proposed framework is based on two key dimensions: “Severity/Hazard” and “Probability/Exposure.” The first dimension determines the potential risk level arising from exposure to nanomaterials, with the most critical factors being the intrinsic properties and toxicology of the nanomaterial itself, parent materials, and similar substances. The second dimension describes the likelihood and nature of exposure to nanomaterials during work activities, with the most influential factors being worker, job tasks, and workplace environment characteristics.
Conclusion: The lack of sufficient data and numerous uncertainties regarding bio-nano interactions make quantitative risk assessment (the traditional occupational health approach) difficult, less reliable, and in some cases unfeasible for nanomaterials—given current knowledge. Qualitative and semi-quantitative approaches, such as Control Banding, despite demonstrating positive aspects, have faced significant criticism. The framework-based method proposed herein appears capable of partially overcoming these challenges.

---

Introduction: With the advancement of industries and increased use of metalworking fluids, controlling pollutants generated by machining operations has become increasingly challenging. This study aimed to address these challenges by designing an air filtration system designed specifically for this purpose.
Material and Methods: A local exhaust ventilation system was developed based on the VS-80-12 ACGIH standard, tailored to the working conditions and air sampling of the environment. The filtration system includes an aluminum pre-filter, an E11 class filter, and a nanofiber filter incorporating a metal-organic framework. The performance of the system was evaluated by measuring the numerical concentration of particles and the mass concentration of oil mist at both the inlet and outlet. The results were then compared to those obtained from an E1 class filter.
Results: The results obtained from XRD and FTIR analyses showed that ZIF-8 had high crystallinity and was successfully incorporated into the structure of the fibrous media filter containing metal-organic framework. The evaluation revealed that the filtration system effectively removed pollutant particles at their source. Notably, the initial efficiency for larger particles reached 100%, while the average removal efficiency for particles smaller than 2.5 microns was 99%.  
Conclusion: In conclusion, the combination of nanofiber filters with a metal-organic framework and aluminum pre-filters presents an effective solution for controlling particulate pollutants from machining operations. However, further research is necessary to comprehensively assess the system’s performance, particularly regarding dust loading capacity. Future studies should also explore the effects of various factors, such as airflow rate and the type of metalworking fluid, on the system’s efficacy.

---

Introduction: Occupational exposure to volatile organic compounds (BTEX) and heavy metals in industrial settings poses significant health concerns. These substances may lead to toxic, carcinogenic, and hematobiochemical effects. This study aimed to assess the health risks associated with exposure to these pollutants in a power equipment manufacturing industry over a 10-year period and to compare the accuracy of quantitative (USEPA) and semi-quantitative (Singapore) risk assessment methods.
Material and Methods: This cross-sectional study was conducted across six occupational groups. Personal air sampling of BTEX and heavy metals was performed according to NIOSH protocols. Carcinogenic and non-carcinogenic risks were estimated using the USEPA method and the Singapore semi-quantitative approach. Additionally, hematological and biochemical indicators of exposed workers were analyzed.
Results: Nickel had the highest cancer risk, and the highest hazard quotient (HQ) values were related to xylene, benzene, and nickel. While the semi-quantitative method classified most risks as negligible to low, the USEPA method identified several cases with definite health risks. Significant effects were observed on SGOT, SGPT, fasting blood sugar, creatinine, and blood pressure among exposed groups.
Conclusion: The USEPA method demonstrated higher sensitivity and reliability in identifying occupational chemical hazards and should be prioritized in future assessments. Furthermore, the findings underscore the importance of preventive measures to reduce chronic exposure to BTEX and heavy metals in similar industrial settings.

---

Introduction: Polymer nanofiber filters have great potential for controlling particulate pollution due to their high filtration efficiency and low pressure drop. This study aimed to fabricate nanofiber membranes from a biodegradable polymer through solution electrospinning to address both health and environmental concerns, along with analyzing their morphological characteristics. The filtration performance of the prepared membranes was evaluated against different particle sizes under two air face velocities. 
Material and Methods: The nanofiber membranes were fabricated from aqueous poly(vinyl alcohol) (PVA) solutions at various concentrations from 5 to 6 w/v%  under different process parameters. The morphological characteristics of the nanofibers were examined using field-emission scanning electron microscopy (FE-SEM), while structural properties such as basis weight and thickness were measured to estimate porosity. Filtration performance, including efficiency and pressure drop, was evaluated at two standard air face velocities (2.5 and 5.3 cm/s) using a media test system. In addition, the quality factor of the prepared membranes was calculated.
Results: The electrospun nanofibers were uniform and bead-free, with the mean fiber diameters ranging from 106 to 151 nm. The filtration efficiencies were 95.72–99.92 % for sub-micron particles (0.3 and 0.5 µm), and 99.43–100 % for larger particles (1 and 3 µm). The pressure drop ranged from 67 to150 Pa at an air face velocity of 2.5 cm/s, and from 58 to150 Pa at an air face velocity of 5.3 cm/s.
Conclusion: The 6 wt.% PVA nanofiber membrane electrospun at 15 kV, 0.5 mL/h, and 15 cm produced thinner fibers (approximately 106 nm) and exhibited higher efficiency for 0.3 µm particles (99.89 % and 99.92 % at 2.5 and 5.3 cm/s air face velocities, respectively). For this membrane with thinner fibers, the pressure drop increased from 67 to 150 Pa with rising the air face velocity. 
 

---

Introduction: Climate change is a major global challenge, strongly influencing the Wet Bulb Globe Temperature (WBGT) index and heat stress among steel industry workers. This study evaluates the impact of geographical location and climate change on occupational heat stress exposure in Iran’s steel sector.
Material and Methods: This qualitative-analytical study used data from the SABA system and the Iranian Occupational Heat Stress Atlas. Information on steel industries, their distribution, and production capacities across eight climate zones was extracted. WBGT measurements were collected in collaboration with industrial units in different zones. Data analysis was performed using ArcGIS and SPSS. The effects of climate change on heat stress were assessed for three future horizons: 2040, 2060, and 2080.
Results: The findings revealed that climate zones G1 (eastern, southeastern, and desert regions) and G4 (Persian Gulf coastal provinces including Hormozgan, Bushehr, Fars, and Khuzestan), which host the highest steel production capacities, are exposed to the highest levels of heat stress (WBGT index) and water resource scarcity. WBGT values in zones G4 and G6 (Gilan province) exceeded permissible limits, whereas zones G2 (including North Khorasan, Razavi Khorasan, Tehran, Alborz, Qazvin, Hamedan, Markazi, and Chaharmahal-Bakhtiari), G5 (Kurdistan, Kermanshah, Lorestan), and G7 (Ilam, Kohgiluyeh and Boyer-Ahmad) showed the lowest WBGT levels. Considering projected temperature increases in the three future horizons and the acceptable correlation coefficient (0.40) between annual daytime temperature and WBGT index per climate zone, predicted temperature changes may lead to increased WBGT levels, particularly in zones G3, G6, and G8.
Conclusion: Given climate projections and the spatial distribution of steel industries, it is essential to develop climate-responsive policies, implement sustainable water resource management, and reconsider the siting of steel production units. These measures can enhance the resilience of Iran’s steel industry against future climate change and mitigate occupational health and environmental risks.