Showing 29 results for Car
Davood Mahmoudi, Jalil Nazari, Leila Rastgoo, Mohammad Asghari Jafarabadi,
Volume 11, Issue 3 (9-2021)
Abstract
Introduction: The carpet industry is one of the most important handicrafts in Iran. This industry is one of the most difficult and harmful professions, in which the employees are often working in a workplace with non-ergonomic, unsafe, and unhealthy conditions. The present study aimed to address the modeling of the individual, job characteristics, and workplace conditions with the general health of carpet weavers through an ergonomic approach.
Material and Methods: The current study was a descriptive-analytic survey. The study population was female workers, who have had a minimum of one-year work experience and working in the workshops located in Meshginshahr city villages. The data collection tool was a combination questionnaire including, Goldberg’s questionnaire (GHQ-28), NIOSH questionnaire (disease history section), and questions about workplace conditions. The obtained data were entered into SPSS-17 software and analyzed statistically using statistical modeling based on the general linear model, multivariate and other statistical tests.
Results: Unpleasant condition was observed among the 37.4% of the examined, in terms of general health. Logistic regression modeling was used to investigate the internal and external factors of carpet weavers with their general health status. According to the model, general health has a significant relationship (p<0.05) with most of the internal factors such as age, marital status, history of disease, etc. However, there was no significant relationship with the workplace conditions.
Conclusion: According to the results of this study, it can be concluded that demographic and job variables are of the most important factors affecting the general health of carpet weavers. Although in the model, the workplace conditions did not show any significant relationship with the components of general health, interpreting these findings requires more studies. More studies are required objectively to identify the effect causes of the general health of carpet weavers (especially workplace conditions).
Vida Rezaei- Hachesu, Shadi Naderyan Fe’li, Khadije Maajani, Rajabali Hokmabadi, Farideh Golbabaei,
Volume 12, Issue 1 (3-2022)
Abstract
Introduction: Covid-19 pandemic has imposed a significant effect on mental health of the health care workers. The present systematic review and meta-analysis aimed at determining the pooled prevalence of anxiety and depression among Iranian health care workers during the Covid-19 pandemic.
Material and Methods: To conduct this systematic review and meta-analysis, Web of Science, Scopus, Medline (PubMed), Embase, SID, Magiran databases and Google Scholar search engine were investigated to find studies over the prevalence of anxiety and depression among health care workers during the Covid-19 pandemic from December 2019 to June 10, 2021. Quality of the primary studies was assessed using the Newcastle-Ottawa tool and the random effects model was applied to estimate the pooled prevalence. Furthermore, χ2 test and I2 index were used to evaluate the degree of heterogeneity among the studies. The pooled prevalence of anxiety and depression in different subgroups was reported based on the severity of anxiety and depression, assessment tools, and staff jobs.
Results: Of 488 articles obtained as a result of the initial search, 10 related studies were identified and entered into the systematic review and meta-analysis. The pooled prevalence of anxiety was 42% (95% CI: 25-75) and the pooled prevalence of depression was 35% (95% CI: 19-55). The pooled prevalence of anxiety was 54% (95% CI: 39-70) in the occupational group of nurses and 29% (95% CI: 17-44) among all health care workers. The pooled prevalence of depression was 46% (95% CI: 30 to 63) and 17% (95% CI: 10 to 26) among nurses and all health workers, respectively.
Conclusion: According to the findings, a high prevalence of anxiety and depression was observed among the health care workers of Iran during the Covid-19 epidemic. The authorities are required to plan for preventive and therapeutic interventions to reduce the psychological burden of the epidemic.
Zahra Alaei, Roohollah Ghasemi, Mohammad Reza Pourmand, Ali Karimi, Ensieh Masoorian, Farideh Golbabaei,
Volume 12, Issue 2 (6-2022)
Abstract
Introduction: Volatile organic compounds are the most common pollutants in the air, and among them, toluene is the most common form, which is toxic resulting in liver and kidneys damages. Regarding the fact that this compound is widely used in various chemical industries, implementing an efficient method for controlling its concentration is of great importance. The comparative survey of the capability of virgin activated carbon with the one immobilized by pseudomonas putida PTCC, and also the performance of the biofiltration system involving pseudomonas putida bacteria immobilized on activated carbon for the adsorption and degradation of toluene from the air as well as regenerating the activated carbon were aimed in the present study.
Material and Methods: The microbial growth process was initiated by incubation of pre-culture in a rotary shaker, at 150rpm overnight. After 4 days, the strain pseudomonas putida, PTCC No: 1694 was immobilized on a certain amount of activated carbon. Subsequently, an airstream containing toluene was introduced into the biofilter, and the inlet and outlet concentrations of toluene were measured.
Results: The obtained results illustrated that the increase in the volume of the media and decrease in the gas flow rate significantly enhances efficiency. The great performance of the biofilter was confirmed by the high efficiency of the immobilized activated carbon which exhibited 89% yield during 14 hours. On the second cycle, the biofiltration system was able to adsorb toluene at an efficiency of 81%, while the virgin activated carbon exhibited far less efficiency with the value of 28%.
Conclusion: The provided results demonstrated the feasibility and reusability of the biofilter system for toluene removal. The proposed technique also extends the activated carbon’s capacity, which could be a potential solution to re-use the activated carbon in industrial applications.
Delnia Jahani, Faranak Jabbarzadeh Tabrizi, Abbas Dadashzadeh, Parvin Sarbakhsh, Mina Hosseinzadeh,
Volume 12, Issue 3 (9-2022)
Abstract
Introduction: Nurses of the emergency department experience stressful events that affect their mental health and reduce the quality of their work life. Career adaptability is considered a personal capability that enables employees to adapt to changes and avoid the negative consequences of job mismatch. This study was conducted to study career adaptability and its correlation with the quality of work life in the emergency department.
Material and Methods: This descriptive-correlational study was conducted on 104 nurses in the emergency department of teaching–therapeutic hospitals in Tabriz who were selected using random stratified sampling. Data was collected using a demographic checklist, the Career Adapt-Abilities Scale (CAAS) by Savickas, and the Quality of Nursing Work Life (QNWL) scale by Brooks & Anderson. Data were analyzed in SPSS using descriptive statistics (frequency, mean and standard deviation) and inferential statistics (independent t-test, one-way analysis of variance, Pearson’s correlation coefficient, and linear regression analysis).
Results: The total scores of career adaptability and the quality of nursing work life were 88.55±25.01 from the achievable range of 24-120 and 141.15±22.56 from the achievable range of 42-252, respectively, which were moderate. In this study, 85.6% of nurses enjoyed a moderate quality of work life. Furthermore, the results of Pearson’s correlation indicated a significant positive correlation between career adaptability and scopes with the quality of work life score (p=0.05). Regression analysis results indicated that career adaptability significantly predicts the quality of nursing work life (p=0.000).
Conclusion: In this study, nurses experienced moderate career adaptability and quality of work life. Given the above factors, and considering adaptability as a variable predicting quality of work life, it is suggested to take measures to increase career adaptability in nurses through training or consulting interventions to improve the quality of nursing work life.
Rajabali Hokmabadi, Esmaeil Zarei, Ali Karimi,
Volume 13, Issue 2 (6-2023)
Abstract
Introduction: Reliability is always of particular importance in system design and planning; thus, improving reliability is among the approaches for achieving a safe system. Simulation methods are widely used in system reliability assessment. Therefore, this study aims to assess the reliability of the City Gate Gas Station (CGS) using Monte Carlo Simulation (MCS).
Material and Methods: This descriptive and analytical study was conducted in one of the CGSs of North Khorasan Province in 2021. The CGS process was carefully examined and its block diagram was plotted. Then, failure time data of CGS equipment were collected over 11 years and time between failures of subsystems was calculated. The failure probability distribution function of subsystems was determined using Easy Fit software and Kolmogorov-Smirnov test. Moreover, subsystems’ reliability was estimated by MCS. Finally, station reliability was calculated considering the series-parallel structure of the CGS.
Results: The results revealed that the failure probability density distribution function of CGS subsystems was based on gamma and normal functions. The reliabilities of filtration, heater, pressure reduction system, and odorize were calculated as 0.97, 0.987, 0.98, and 0.992 respectively, and their failure rates were 0.000003477, 0.0000014937, 0.0000023062, and 0.0000009169 failures per hour respectively. The station reliability was calculated as 0.93.
Conclusion: The failure probability distribution function and reliability assessment of subsystems were determined by data modeling and MCS respectively. Filtration and pressure reduction systems had the highest failure rate and required a proper maintenance program.
Zeinab Rostami, Mohammad Reza Abedi, Parisa Nilforooshan,
Volume 13, Issue 4 (12-2023)
Abstract
Introduction: Due to the lack of an instrument for measuring the career issues of those with bipolar disorder, the present study was conducted to develop and examine the psychometric characteristics of the Career Issues Inventory for Persons with Bipolar Disorder (CII-BD).
Material and Methods: To check the diagnostic validity, via purposive sampling and interviews by a psychiatrist, 108 people were selected from two sample groups (53 normal people and 55 participants with bipolar disorder). The items were extracted from three sources including scientific articles related to the career issues of bipolar people, interviews with individuals with bipolar disorder, and interviews with experts using the Meta-analysis Of Observational Studies in Epidemiology (MOOSE) systematic qualitative method. Finally, the items of the CII-BD were reduced to 81 questions. Content, construct, and convergent validity plus factor analysis of CII-BD were also examined. The reliability of CII-BD was evaluated by internal consistency and test-retest method with seven weeks intervals after the initial implementation of the CII-BD.
Results: The convergent validity of the sum score of CII-BD with the sum score of the symptom inventory of people with bipolar disorder among the sample of normal people and the sample of persons with bipolar disorder was (r=0.79, P<0.01, N=53) and (r=0.78, P<0.0001, N=53) respectively. In construct validity examination, nine subscales were extracted using the factor analysis method with varimax rotation, which included communication problems, poor work performance, insecurity, grandiosity, unreliability, change-seeking, vulnerability, lack of boundaries, and lack of self-control towards the opposite sex. In the reliability analysis, Cronbach’s alpha coefficient was 0.96 (N=55, participants with bipolar disorder) and 0.86 (N=53, normal people), respectively, P<0.05, showing the high internal consistency of CII-BD. The test-retest correlation coefficient of the sum scores of the CII-BD was r = 0.91, P < 0.01, which indicated the credible stability of the CII-BD.
Conclusion: The CII-BD is a valid and reliable instrument to measure the specific career issues of bipolar persons and their early vocational rehabilitation. It is suggested that future research should focus on choosing a job and job placement for bipolar disorder persons.
Pourya Ahmadi Jalaldehi, Jila Yavarian, Farideh Golbabaei, Saba Kalantary, Abbas Rahimi Foroushani, Hossein Abbaslou,
Volume 13, Issue 4 (12-2023)
Abstract
Introduction: The COVID-19 pandemic has been a significant global health challenge. Primary care services, such as screening health centers, were crucial in identifying infected individuals. However, these centers were often crowded and posed a high risk to staff and non-COVID-19 patients. This study aims to assess the risk of airborne transmission of SARS-CoV-2 in such settings through simulation.
Material and Methods: In this study, waiting and sampling rooms of a COVID-19 healthcare center were simulated using different scenarios. Then, the Quanta emission rate was estimated using the viral load in the sputum of infected individuals. Finally, the airborne transmission risk of SARS-CoV-2 was determined using the Wells-Riley method for scenarios of wearing and without masks.
Results: The study showed that the Quanta emission rate in an unmodulated speaking activity was higher than other expiratory activities in both units (p <0.001). Also, the total amount of Quanta was slightly higher in the sampling room than in the waiting room, which was not statistically significant. On the other hand, the calculation of transmission risk showed that the probability of airborne virus transmission in the sampling room was higher (about 2 to 8%). In addition, wearing masks reduced the possibility of airborne transmission of the virus significantly (77 to 81%).
Conclusion: This study shows that the level of risk in the sampling and waiting rooms is moderate. Masks also significantly reduce the possibility of airborne transmission of SARS-CoV-2. Taking appropriate health and safety measures such as avoiding crowds, wearing masks, whispering, and monitoring social distancing can reduce the plausibility of airborne transmission of the SARS-CoV-2 virus.
Mahdi Alinia Ahandani, Saba Kalantary, Monireh Khadem, Fatemeh Jafari, Kamal Azam, Farideh Golbabaei,
Volume 13, Issue 4 (12-2023)
Abstract
Introduction: VOCs are harmful air pollutants that must be detected, monitored and eliminated. Adsorber tubes are standard tools for this task, specifically activated carbon tubes with high adsorption and selectivity. This research aims to compare the structural and functional characteristics of domestically produced activated carbon tubes with the conventional commercial ones for sampling toluene, a volatile organic compound.
Material and Methods: The characteristics of each adsorbent, such as structure, morphology, porosity, and element composition, were examined by SEM photography, BET testing, and EDAX analysis. The central composite design (CCD) method was employed to investigate the adsorption properties of the adsorbents. The input concentration and readsorption time of the samples were the variables considered in this study. Additionally, a field phase of personal air sampling was performed to evaluate the effectiveness of adsorbent tubes.
Results: SEM and BET analyses indicated that the porous structure of domestic activated carbon was comparable to the model produced by SKC. EDAX analysis detected a minor impurity (1%) in the domestic activated carbon adsorbent. The adsorption performance was significantly influenced by the variations in readsorption time and pollutant input concentration. The accuracy and precision of the performance of the domestic adsorbent tube were obtained as 90.77% and 91.76%. The field phase results demonstrated that the amount of pollutant adsorbed in the SKC-activated charcoal adsorber did not differ significantly during 0 to 30 days. However, the domestic adsorber showed a significant difference in the same period. The overall performance of the two adsorbers did not exhibit a significant difference between 0 and 30 days.
Conclusion: Despite minor structural differences, the adsorption efficiency of toluene by domestic adsorbent tubes in sampling high concentrations is very similar to its commercial type. However, it is not recommended for use in low-concentration environments (10 ppm and less).
Mojtaba Zokaei, Milad Abbasi, Mohsen Vahidnia, Mohamad Zarie, Fardin Zndsalimi, Mohsen Falahati,
Volume 14, Issue 3 (10-2024)
Abstract
Introduction: Nowadays, the statistics prove that the underground construction projects in the country are increasing, as well as the number of accidents arising from the unsafe condition of these projects. The purpose of this study was to create a framework of safety and health risk management in the construction phase of the Tehran Metro Line 7 tunnel, using IoT technology.
Material and Methods: In the first stage, the national safety and health standards, laws and requirements related to the mentioned hazards were collected. In the second stage, the criteria and permissible limits of exposure to occupational hazards were determined. Next, sensors with optical, auditory, gas detection, and visual capabilities connected to the network were examined, and computer programming and comparing sensor information with the specified standards were carried out. Finally, intelligent warning and control systems related to the determined hazards were proposed.
Results: In this study, a combined model of risk management utilizing IoT for controlling and monitoring safety and health hazards such as sound, light, explosive and toxic gases was proposed. According to the model, sensors for detecting the mentioned hazards were determined and coded based on the permissible limit of each of the harmful factors.
Conclusion: This study has shown that by employing specialized IT and safety knowledge and utilizing relevant software and hardware, the concept of the Internet of Things can be utilized in precise monitoring of the concentration levels of flammable and toxic gases, as well as monitoring of physical agents such as noise and light in various workplace, such as metro tunnel construction sites.
