Reza Jafari Nodoushan, Mostafa Azimzadeh, Sahar Bagheri, Arefeh Dehghani Tafti,
Volume 11, Issue 4 (12-2021)
Abstract
Introduction: In recent years tend to use of natural fibers has increased in making sound absorbers. Fiber-based natural materials have low density, low production costs, and are biodegradable.
Material and Methods: In this study, the effect of nanoclay and the behavior of the nanocomposite specimens containing tea waste, polypropylene, and nanoclay in the sound absorption coefficient are investigated.
Results: The results showed the sound absorption coefficient increases by increasing the tea waste weight percent of the polypropylene. 60% increase in tea waste has a special role in the absorption of sound waves at a frequency of 1000 Hz and 2500 to 6300 Hz frequency range as the TW60 N5 sample has the sound absorption coefficient 0.94 and 0.84 in 1000 and 6300 Hz frequencies, respectively. Comparison of the sound absorption coefficient of composite and nanocomposite showed that sound absorptions increase by adding nanoclay to the 5%, at frequencies above 2000 Hz.
Conclusion: Tea waste-based sound absorbers can be used in noise control due to the high acoustic absorption and no harmful effects on human health.
Elnaz Rahimi, Saba Kalantary, Aziz Babapoor, Habibollah Dehghan, Anoshirvan Kazemnejad, Mohammadreza Monazzam Esmaeelpour,
Volume 15, Issue 2 (7-2025)
Abstract
Introduction: Wearable thermal management systems and phase change materials (PCMs) have emerged as effective solutions for regulating body temperature and storing thermal energy. This study focuses on synthesizing and thermal optimizing a sodium sulfate decahydrate-based nanocomposite incorporating various nanoparticles to improve its performance for personal thermal regulation applications.
Material and Methods: The composite was prepared using sodium sulfate decahydrate as the base PCM. Potassium chloride (KCl) was added to adjust the melting point, borax (STD) served as a nucleating agent, and sodium polyacrylate (SPA) was included as a thickening agent to suppress phase separation. To evaluate the effect of nanoparticle additives, 0.05 wt.% of aluminum oxide (Al₂O₃), iron oxide (Fe₂O₃), graphene oxide (GO), and titanium dioxide (TiO₂) were separately incorporated into the base formulation. A field emission scanning electron microscope (FESEM) was used to analyze the surface morphology of the resulting nanocomposites. Differential scanning calorimetry (DSC) assessed thermal properties, including phase transition temperatures (melting and freezing points) and latent heat.
Results: Differential scanning calorimetry (DSC) analysis indicated that sample S-5-5 comprising sodium sulfate decahydrate with 3 wt.% KCl, 5 wt.% STD and SPA exhibited a melting temperature of 29.5 °C and a latent heat of 120 J/g. This composition remained stable without phase separation. The incorporation of nanoparticles raised the melting point of the base PCM by 0.6 to 1.72 °C. Aluminum oxide (Al₂O₃) and iron oxide (Fe₂O₃) reduced the latent heat of fusion, whereas GO and TiO₂ increased it.
Conclusion: These findings confirm that the thermal properties of sodium sulfate decahydrate-based PCMs can be tailored by including specific additives and nanoparticles. Hydrated salt nanocomposites demonstrate strong potential as PCMs for wearable body temperature regulation.
