| چکیده فارسی مقاله |
مقدمه: تيلر يک تراکتور دستی چند منظوره است که در ابتدا برای شخم زدن زمين و بعدا برای فعاليتهای ديگر کشاورزی استفاده می شود. ارتعاش منتقله از دسته تيلر به کاربران احتمال دارد منجر به بروز صدمات زيادی از جمله ناراحتی ، درد و اختلالات اسکلتی عضلانی گردد. هدف از اين مطالعه ارزيابی مواجهه با ارتعاش دست و بازو در کاربران تيلر مدل HT900 به عنوان فراوانترين مدل تيلر مورد استفاده می باشد. . روش کار: در اين مطالعه 40 کاربر تيلر مدل HT 900 در شهرستان کاشمر استان خراسان رضوی مورد بررسی قرار گرفتند . اندازه گيری ارتعاش دست و بازو بر اساس استاندارد ISO 5349-1 و ISO 5349-2 در 3 حالت مختلف، ساکن و دنده خلاص (درجا) ، انتقال به زمين و شخم زدن زمين در دنده های مختلف انجام شد. جهت اندازه گيری ارتعاش از ارتعاش سنج پاسخ انسان B$K مدل 2512 استفاده شد. . يافته ها: نتايج اين مطالعه نشان داد که در تمام موقعيتهای اندازه گيری شده ميزان مواجهه با ارتعاش دست و بازو بيش از ميزان استاندارد بوده و خطر بروز اختلالات ناشی از ارتعاش وجود دارد. بيشترين ميزان مواجهه با ارتعاش در حالت شخم زدن تيلر می باشد . ميزان مواجهه در 3 حالت شخم زدن ، انتقال و درجا کار کردن تيلر به ترتيب برابر 16.95 ، 14.16 و 8.65 متر بر مجذور ثانيه می باشد. در تمام حالات اندازه گيری شده ميزان مواجهه با ارتعاش در جهت x نسبت به جهت y و z بيشتر بود. . نتيجه گيری: اين مطالعه بر نياز برای مداخله و اتخاذ تدابير کنترلی و مديريتی جهت حذف و کاهش ارتعاش دست و بازو منتقله از تيلر به دست کاربران جهت جلوگيری از بروز مشکلات عمده از جمله وقوع اختلالات اسکلتی – عضلانی ، ناراحتی و خستگی زودرس تاکيد فراوان داشته و همچنين تياز به انجام مطالعات بيشتر جهت شناسايی منابع ارتعاش بر روی انواع مختلف تيلر نيز امری ضروريست. |
| چکیده انگلیسی مقاله |
Introduction: The power tiller is a multipurpose hand tractor designed primarily for rotary tilling and other farm operations. Vibration, transmitted from the handles of the tiller to the operators’ body, causes many injuries such as, pain, musculoskeletal disorders and white finger syndrome. The aim of this study was to evaluate the hand-arm vibration exposure in the operators of tiller model HT900, as the most frequently used model of tillers. . Material and Method: In this study, 40 operators tiller of model HT900 in the city of Kashmar, Khorasan Razavi were examined. Hand-arm vibration measurement was done according to ISO 5349-1 and ISO 5349-2 in three different modes including, static and neutral (mode), transition to the ground mode and plowing the land mode in different gears. In order to measure the vibrations, human response vibration meter of B and K model 2512 was utilized. . Result: Results of the present study indicated that in all measured situations, exposure to hand arm vibration was higher than the standard limit suggested by Iranian occupational health committee and there was risk of vibration-induced disorders. The maximum exposure to vibration is in plowing ground. Exposure to hand arm vibration in three modes of plowing, transmission and natural, were respectively 16.95, 14.16 and 8.65 meters per second squared. Additionally, in all situations, vibration exposure was highest in the X-axis in comparison with Z- and Y-axes. . Conclusion: This study emphasizes on the need to provide intervention and controlling and managing strategies in order to eliminate or reduce vibration transmitted from tiller to operators hand and arm and also prevent to serious problems including neurovascular disorders, discomfort and white finger syndrome. Meanwhile, more studies are necessary to identify the sources of vibration on different models of tiller. |