1386/3/11، جلد ۶۵، شماره ۳، صفحات ۱۳-۱۶

عنوان فارسی نتايج يک کُد فرترن برای محاسبه دوز غده‌ای در ماموگرافی با استفاده از پارامترهای Sobol-Wu
چکیده فارسی مقاله نوشتن يک کُد کامپيوتری برای محاسبه متوسط دوز جذبی غده‌ای در ماموگرافی برای تخمين دوز دقيق و سريع، مؤثر است.
روش بررسی: در اين پژوهش، با استفاده از پارامترهای محاسبه شده توسط
Sobol-Wu، يک کُد برای محاسبه دوز به زبان فرترن نوشته شده است. اين کُد کامپيوتری، دوز را برای ماموگرامهای با هدف- فيلتر Mo-Mo، Rh-Rh و Mo-Rh به ازای پارامترهای ورودی: ولتاژ، ضخامت نيم لايه اشعه X، ضخامت پستان، و کسر غده‌ای بافت پستان محاسبه می‌کند.
يافته‌ها: با اجرای کُد، تغييرات متوسط دوز جذبی غده‌ای برای سه آرايش هدف- فيلتر و به ازای cm 4d=، mm 34/0HVL=، و 5/0g= بر حسب ولتاژ لامپ اشعه X دستگاه ماموگرام، و تغييرات آن بر حسب درصد غده‌ای بافت پستان به ازای 25kV=، mm 34/0HVL=، و cm 4d= محاسبه شده است. همچنين تغييرات متوسط دوز جذبی غده‌ای بر حسب HVL اشعه X دستگاه ماموگرام به ازای 28kV=، 4d=، و 6/0g= گزارش شده و نتايج بدست آمده از اين کُد در توافق بسيار خوبی با نتايج ديگران است.
نتيجه‌گيری: علاوه بر جامعيت، سرعت و دقت دوز محاسبه شده و استفاده آسان کُد توسط کاربر، می‌توان از آن برای بهينه‌سازی دوز تابشی در ماموگرافی استفاده کرد.

کلیدواژه‌های فارسی مقاله کُد فرترن،دوز غده‌ای،ماموگرافی،پارامترهای Sobol،Wu

عنوان انگلیسی FORTRAN Code for Glandular Dose Calculation in Mammography Using Sobol-Wu Parameters
چکیده انگلیسی مقاله Background: Accurate computation of the radiation dose to the breast is essential to mammography. Various the thicknesses of breast, the composition of the breast tissue and other variables affect the optimal breast dose. Furthermore, the glandular fraction, which refers to the composition of the breasts, as partitioned between radiation-sensitive glandular tissue and the adipose tissue, also has an effect on this calculation. Fatty or fibrous breasts would have a lower value for the glandular fraction than dense breasts. Breast tissue composed of half glandular and half adipose tissue would have a glandular fraction in between that of fatty and dense breasts. Therefore, the use of a computational code for average glandular dose calculation in mammography is a more effective means of estimating the dose of radiation, and is accurate and fast.
Methods: In the present work, the Sobol-Wu beam quality parameters are used to write a FORTRAN code for glandular dose calculation in molybdenum anode-molybdenum filter (Mo-Mo), molybdenum anode-rhodium filter (Mo-Rh) and rhodium anode-rhodium filter (Rh-Rh) target-filter combinations in mammograms. The input parameters of code are: tube voltage in kV, half-value layer (HVL) of the incident x-ray spectrum in mm, breast thickness in cm (d), and glandular tissue fraction (g).
Results: The average glandular dose (AGD) variation against the voltage of the mammogram X-ray tube for d = 4 cm, HVL = 0.34 mm Al and g=0.5 for the three filter-target combinations, as well as its variation against the glandular fraction of breast tissue for kV=25, HVL=0.34, and d=4 cm has been calculated. The results related to the average glandular absorbed dose variation against HVL for kV = 28, d=4 cm and g= 0.6 are also presented. The results of this code are in good agreement with those previously reported in the literature.
Conclusion: The code developed in this study calculates the glandular dose quickly, and it is complete and accurate. Furthermore, it is user friendly and useful for dose optimizing in mammography imaging.
کلیدواژه‌های انگلیسی مقاله Fortran code, glandular dose, mammography, sobol-wu parameters

نویسندگان مقاله 25003---

نشانی اینترنتی http://tumj.tums.ac.ir/browse.php?a_code=A-10-25-812&slc_lang=fa&sid=fa
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده General
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات